t75699_10k.htm


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C.  20549
 

 
FORM 10-K
 
(Mark One)
 
x
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
 For the fiscal year ended    December 31, 2012 
 
OR
 
o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the transition period from____________________________ to ____________________________
 
 Commission File No.    001-14124
 
 MILLER INDUSTRIES, INC.
 (Exact name of registrant as specified in its charter)
 
Tennessee
 
62-1566286
(State or other jurisdiction of incorporation or organization)
 
(I.R.S. Employer Identification No.)
     
8503 Hilltop Drive, Ooltewah, Tennessee
 
37363
(Address of principal executive offices)
 
(Zip Code)
     
(423) 238-4171
(Registrant’s telephone number, including area code)
 
Securities registered pursuant to Section 12(b) of the Act:
 
Title of Each Class
 
Name of Each Exchange on Which Registered
     
Common Stock, par value $.01 per share
 
New York Stock Exchange
 
Securities registered pursuant to Section 12(g) of the Act:
 
None
(Title of Class)
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
o   Yes       x    No
 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.
o   Yes       x    No
 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
 
x   Yes       o   No
 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
 x   Yes       o   No
 
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.     o
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company.  See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act:
 
Large Accelerated Filer      o                                                         Accelerated Filer     x
 
Non-accelerated Filer     o                                                              Smaller Reporting Company     o
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).
o   Yes       x    No
 
The aggregate market value of the voting stock held by non-affiliates of the registrant (which for purposes hereof are all holders other than executive officers and directors) as of June 29, 2012 (the last business day of the registrant’s most recently completed second fiscal quarter) was $168,828,657 (based on 10,598,158 shares held by non-affiliates at $15.93 per share, the last sale price reported on the New York Stock Exchange on June 29, 2012).
 
At February 28, 2013 there were 11,175,915 shares of the registrant’s common stock, par value $0.01 per share, outstanding.
 
DOCUMENTS INCORPORATED BY REFERENCE
 
The information called for by Part III (Items 10, 11, 12, 13 and 14) is incorporated herein by reference to the Registrant’s definitive proxy statement for its 2013 Annual Meeting of Shareholders which is to be filed pursuant to Regulation 14A.
 
 

 
 
TABLE OF CONTENTS
 
PART I
       
2
 
8
 
11
 
11
 
11
 
11
 
  12  
14
 
15  
20
 
21
 
21  
21
 
24
 
25
 
25
 
25
 
25
 
25
 
26
 
       
F-1
 
S-1
 
 
 
i

 
 
CERTAIN FACTORS AFFECTING FORWARD-LOOKING STATEMENTS
 
Certain statements in this Annual Report, including but not limited to statements made in Part II–Item 7–Management’s Discussion and Analysis of Financial Condition and Results of Operations,” statements made with respect to future operating results, expectations of future customer orders and the availability of resources necessary for our business  may be deemed to be forward-looking statements, as defined in the Private Securities Litigation Reform Act of 1995.  Forward-looking statements can be identified by the use of words such as “may,” “will,” “should,” “could,” “continue,” “future,” “potential,” “believe,” “project,” “plan,” “intend,” “seek,” “estimate,” “predict,” “expect,” “anticipate” and similar expressions, or the negative of such terms, or other comparable terminology.  Forward-looking statements also include the assumptions underlying or relating to any of the foregoing statements.  Such forward-looking statements are made based on our management’s beliefs as well as assumptions made by, and information currently available to, our management.  Our actual results may differ materially from the results anticipated in these forward-looking statements due to, among other things: economic and market conditions; the risks related to the general economic health of our customers; our customer’s access to capital and credit to fund purchases, including the ability of our customers to secure floor plan financing; the success and timing of existing and additional export and governmental orders; the cyclical nature of our industry; changes in fuel and other transportation costs; our dependence on outside suppliers of raw materials; changes in the cost of aluminum, steel and related raw materials; and those other risks referenced herein, including those risks referred to in this report, in Part I, Item 1A–”Risk Factors” and those risks discussed in our filings with the Securities and Exchange Commission filed after this Annual Report.  Such factors are not exclusive.  We do not undertake to update any forward-looking statement that may be made from time to time by, or on behalf of, our company.
 
 
1

 
 
PART I
 
BUSINESS
 
General
 
Miller Industries is the world’s largest manufacturer of vehicle towing and recovery equipment, with executive offices in Ooltewah, Tennessee, domestic manufacturing operations in Tennessee and Pennsylvania, and foreign manufacturing operations in France and the United Kingdom.
 
Since 1990, we have developed or acquired several of the most well-recognized brands in the towing and recovery equipment manufacturing industry.  Our strategy has been to diversify our line of products and increase our presence in the industry by combining internal growth and development with acquisitions of complementary products.
 
In this Annual Report on Form 10-K, the words “Miller Industries,” “the Company,” “we,” “our,” “ours” and “us” refer to Miller Industries, Inc. and its subsidiaries or any of them.
 
Towing and Recovery Equipment
 
We offer a broad range of towing and recovery equipment products that meet most customer design, capacity and cost requirements.  We manufacture the bodies of wreckers and car carriers, which are installed on truck chassis manufactured by third parties.  We frequently purchase the truck chassis for resale to our customers.  Wreckers generally are used to recover and tow disabled vehicles and other equipment and range in type from the conventional tow truck to large recovery vehicles with rotating hydraulic booms and up to 75-ton lifting capacities.  Car carriers are specialized flatbed vehicles with hydraulic tilt mechanisms that enable a towing operator to drive or winch a vehicle onto the bed for transport.  Car carriers transport new or disabled vehicles and other equipment and are particularly effective over longer distances.  We also manufacture vehicle transport trailers.
 
Our products primarily are sold through independent distributors that serve all 50 states, Canada and Mexico, and other foreign markets including Europe, the Pacific Rim, the Middle East, South America and Africa, and through prime contractors to governmental entities.  Additionally, as a result of our ownership of Jige in France and Boniface in the United Kingdom, we have substantial distribution capabilities in Europe.  While most of our distributor agreements do not contain exclusivity provisions, management believes that approximately 85% of our independent distributors sell our products on an exclusive basis.  In addition to selling our products to towing operators, our independent distributors provide parts and service.  We also utilize sales representatives to exclusively market our products and provide expertise and sales assistance to our independent distributors.  Management believes the strength of our distribution network and the breadth of our product offerings are two key advantages over our competitors.
 
Product Lines
 
We manufacture a broad line of wrecker, car carrier and trailer bodies to meet a full range of customer design, capacity and cost requirements.
 
Wreckers.  Wreckers are generally used to recover and tow disabled vehicles and other equipment and range in type from the conventional tow truck to large recovery vehicles with up to 75-ton lifting capacities.  Wreckers are available with specialized features, including underlifts, L-arms, crossbars and scoops, which lift disabled vehicles by the tires or front axle to minimize front end damage to the towed vehicles.  Certain heavy duty wrecker models offer rotating booms, which allow heavy duty wreckers to recover vehicles from any angle, and remote control devices for operating wreckers.  In addition, certain light duty wreckers are equipped with automatic wheellift hookup devices that allow operators to engage a disabled or unattended vehicle without leaving the cab of the wrecker.
 
 
2

 
 
Our wreckers range in capacity from 4 to 75 tons, and are classified as either light duty or heavy duty, with wreckers of 16-ton or greater capacity being classified as heavy duty.  Light duty wreckers are used to remove vehicles from accident scenes and vehicles illegally parked, abandoned or disabled, and for general recovery.  Heavy duty wreckers are used in towing and recovery applications including overturned tractor trailers, buses, motor homes and other large vehicles.
 
Car Carriers.  Car carriers are specialized flat-bed vehicles with hydraulic tilt mechanisms that enable a towing operator to drive or winch a vehicle onto the bed for transport.  Car carriers are used to transport new or disabled vehicles and other equipment and are particularly effective for transporting vehicles or other equipment over longer distances.  In addition to transporting vehicles, car carriers may also be used for other purposes, including transportation of industrial equipment.  Most professional towing operators have car carriers in their fleets to complement their towing capabilities.
 
Transport Trailers.  Our multi-vehicle transport trailers are specialized auto transport trailers with upper and lower decks and hydraulic ramps for loading vehicles.  These trailers are used for moving multiple vehicles for auto auctions, car dealerships, leasing companies and other similar applications.  These trailers are easy to load and transport 6 to 7 vehicles.  The vehicles can be secured to transport quickly with ratchet and chain tie-downs that are mounted throughout the frame of the transport.  Many professional towing operators have added auto transport trailers to their fleets to add to their service offerings.  Also, we design, engineer and manufacture special-use transport and trailer products. On December 27, 2012, we formed Delavan Automotive LLC, of which we have a controlling interest, for the sale of larger capacity automobile transport trailers in the United States and Canada.  We will produce trailers under this entity beginning in 2013 as an extension of our current product offering.
 
Brand Names
 
We manufacture and market our wreckers, car carriers and trailers under ten separate brand names.  Although certain brands overlap in terms of features, prices and distributors, each brand has its own distinctive image and customer base.
 
Century®.  The Century brand is our “top-of-the-line” brand and represents what management believes to be the broadest product line in the industry.  The Century line was started in 1974 and produces wreckers ranging from 8-ton light duty to 75-ton heavy duty models, and car carriers in lengths from 20 to 30 feet.  Management believes that the Century brand has a reputation as the industry’s leading product innovator.
 
Vulcan®.  Our Vulcan product line includes a range of premium light duty and heavy duty wreckers, ranging from 8-ton light duty to 50-ton heavy duty models, and car carriers.  The Vulcan line is sold through its own independent distribution network.
 
Challenger®.  Our Challenger products compete with the Century and Vulcan products and constitute a third premium product line.  Challenger products consist of heavy duty wreckers with capacities ranging from 25 to 75 tons.  The Challenger line was started in 1975 and is known for high performance heavy duty wreckers and aesthetic design.
 
Holmes®.  Our Holmes product line includes mid-priced wreckers with 4 to 16 ton capacities, a 16-ton rotator and a detachable towing unit (DTU).  The Holmes wrecker was first produced in 1916.  Historically, the Holmes name has been the most well-recognized and leading industry brand both domestically and internationally.
 
Champion®.  The Champion brand, which was introduced in 1991, includes car carriers which range in length from 19 to 21 feet.  The Champion product line, which is generally lower-priced, allows us to offer a full line of car carriers at various competitive price points.
 
Chevron™.  Our Chevron product line is comprised primarily of premium car carriers.  Chevron produces a range of premium single-car, multi-car and industrial carriers, as well as wreckers ranging from 8-ton to 16-ton models.  The Chevron line is operated autonomously with its own independent distribution network.
 
Eagle®.  Our Eagle products consist of light duty wreckers with the “Eagle Claw” hook-up system that allows towing operators to engage a disabled or unattended vehicle without leaving the cab of the tow truck.  The “Eagle Claw” hook-up system was originally developed for the repossession market.  Since acquiring Eagle, we have upgraded the quality and features of the Eagle product line and expanded its recovery capability.
 
 
3

 
 
Titan®.  Our Titan product line is comprised of premium multi-vehicle transport trailers which can transport up to 7 vehicles depending on configuration.
 
Jige™.  Our Jige product line is comprised of a broad line of premium light duty and heavy duty wreckers and car carriers marketed primarily in Europe.  Jige is a market leader best known for its innovative designs of car carriers and light duty wreckers necessary to operate within the narrow confines of European cities, as well as heavy duty wreckers.
 
Boniface™.  Our Boniface product line is comprised primarily of premium heavy duty wreckers marketed primarily in Europe.  Boniface produces heavy duty wreckers specializing in the long underlift technology required to tow modern European tour buses.
 
Product Development and Manufacturing
 
Our Holmes and Century brand names are associated with four of the major innovations in the industry:  the rapid reverse winch; the tow sling; the hydraulic lifting mechanism; and the underlift with parallel linkage and L arms.  Our engineering staff, in consultation with manufacturing personnel, uses computer-aided design and stress analysis systems to test new product designs and to integrate various product improvements.  In addition to offering product innovations, we focus on developing or licensing new technology for our products.
 
We manufacture wreckers, car carriers and trailers at seven manufacturing facilities located in the United States, France and the United Kingdom.  The manufacturing process for our products consists primarily of cutting and bending sheet steel or aluminum into parts that are welded together to form the wrecker, car carrier body or trailer.  In addition, during the past several years, we have also begun to produce wrecker bodies using composites and other non-metallic materials.  After the frame is formed, components such as hydraulic cylinders, winches, valves and pumps, which are purchased by us from third-party suppliers, are attached to the frame to form the completed wrecker or car carrier body.  The completed body is either installed by us, or shipped by common carrier to a distributor where it is then installed, on a truck chassis.  Generally, the wrecker or car carrier bodies are painted and towing operators can select customized colors to coordinate with chassis colors or fleet colors.  To the extent final painting is required before delivery, we either complete such painting or contract with independent paint shops for such services.
 
We purchase raw materials and component parts from a number of sources.  Although we have no long-term supply contracts, management believes we have good relationships with our primary suppliers.  In recent years prices have fluctuated significantly, but we have experienced no significant problems in obtaining adequate supplies of raw materials and component parts to meet the requirements of our production schedules.  Management believes that the materials used in the production of our products are available at competitive prices from an adequate number of alternative suppliers.  Accordingly, management does not believe that the loss of a single supplier would have a material adverse effect on our business.
 
Sales, Distribution and Marketing
 
Management categorizes the towing and recovery market into three general product types:  light duty wreckers; heavy duty wreckers; and car carriers.  The light duty wrecker market consists primarily of professional wrecker operators, repossession towing services, local and national governmental entities and repair shop or salvage company owners.  The heavy duty market includes professional wrecker operators serving the needs of commercial vehicle operators as well as governmental entities.  The car carrier market has expanded to include equipment rental companies that offer delivery service and professional towing operators who desire to complement their existing towing capabilities.  Management estimates that there are approximately 35,000 professional towing operators and many more service station, repair shop and salvage operators comprising the overall towing and recovery market.
 
We have developed a diverse network of independent distributors, consisting of approximately 80 distributors in North America, who serve all 50 states, Canada and Mexico, and numerous distributors that serve other foreign markets.  In 2012, no single distributor accounted for more than 10% of our sales.  Management believes our broad and diverse network of distributors provides us with the flexibility to adapt to market changes, lessens our dependence on particular distributors and reduces the impact of regional economic factors.
 
 
4

 
 
Our sales force services our network of independent distributors and consists of sales representatives whose responsibilities include providing administrative and sales support to the entire base of independent distributors.  Sales representatives receive commissions on direct sales based on product type and brand and generally are assigned specific territories in which to promote sales of our products and to maintain customer relationships.
 
In addition to providing services to our network of independent distributors, our sales force sells our products to various governmental entities, including the U.S. federal government and foreign governments, through prime contractors.  For example, in 2011, 26.8% of our consolidated net sales were made to the U.S. federal government through prime contractors.
 
To support sales and marketing efforts, we produce demonstrator models that are used by our sales representatives and independent distributors.  To increase exposure to our products, we also serve as the official recovery team for many automobile racing events, including NASCAR races at Daytona, Talladega, Richmond, Atlanta, Chicago, Kansas, California, Michigan, Darlington, Phoenix, Homestead (Miami) and the Rolex Daytona 24 Hour Race, among others.
 
We routinely respond to requests for proposals or bid invitations in consultation with our local distributors.  Our products have been selected by the United States General Services Administration as an approved source for certain federal and defense agencies.  We intend to continue to pursue government contracting opportunities.
 
The towing and recovery equipment industry places heavy marketing emphasis on product exhibitions at national, regional and international trade shows.  In order to focus our marketing efforts and to control marketing costs, we concentrate our efforts on the major trade shows each year, and we work with our network of independent distributors to concentrate on various regional shows.
 
Product Warranties and Insurance
 
We generally offer a 12-month limited manufacturer’s product and service warranty on our wrecker and car carrier products.  Our warranty generally provides for repair or replacement of failed parts or components.  Warranty service is usually performed by us or an authorized distributor.  Management believes that we maintain adequate general liability and product liability insurance.
 
Backlog
 
We produce virtually all of our products to order.  Our backlog is based upon customer purchase orders that we believe are firm.  The level of backlog at any particular time, however, may not be an appropriate indicator of our future operating performance.  Certain purchase orders may be subject to cancellation by the customer upon notification.  Given our production and delivery schedules, management generally believes that the current backlog represents less than three months of production except for certain governmental orders for which we expect production to continue into the second half of 2014.
 
Competition
 
The towing and recovery equipment manufacturing industry is highly competitive for sales to distributors and towing operators.  Management believes that competition in this industry focuses on product quality and innovation, reputation, technology, customer service, product availability and price.  We compete on the basis of each of these criteria, with an emphasis on product quality and innovation and customer service.  Management also believes that a manufacturer’s relationship with distributors is a key component of success in the industry.  Accordingly, we have invested substantial resources and management time in building and maintaining strong relationships with distributors.  Management also believes that our products are regarded as high quality within their particular price points.  Our marketing strategy is to continue to compete primarily on the basis of quality and reputation rather than solely on the basis of price, and to continue to target the growing group of professional towing operators who as end-users recognize the quality of our products.
 
Traditionally, the capital requirements for entry into the towing and recovery manufacturing industry have been relatively low.  Management believes a manufacturer’s capital resources and access to technological improvements have become a more integral component of success in recent years.  Certain of our competitors may have greater financial and other resources and may provide more attractive dealer and retail customer financing alternatives than we do.
 
 
5

 
 
Employees
 
We employed approximately 750 people as of December 31, 2012.  None of our employees are covered by a collective bargaining agreement, though our employees in France and the United Kingdom have certain similar rights provided by their respective government’s employment regulations.  We consider our employee relations to be good.
 
Intellectual Property Rights
 
Our development of the underlift parallel linkage and L-arms is considered one of the most innovative developments in the wrecker industry.  This technology is significant primarily because it allows the damage-free towing of newer aerodynamic vehicles made of lighter weight materials.  This technology, particularly the L-arms, is used in a majority of commercial wreckers today.  We hold a number of utility and design patents covering other of our products, including the Vulcan “scoop” wheel-retainer and the car carrier anti-tilt device.  We have also obtained the rights to use and develop certain technologies owned or patented by others.  Management believes that, until the patents on our technology expire, utilization of our patented technology without a license is an infringement of such patents.  We have successfully litigated infringement lawsuits in which the validity of our patents on our technology was upheld, and successfully settled other lawsuits.  Pursuant to the terms of a consent judgment entered into in 2000 with the Antitrust Division of the U.S. Department of Justice, we are required to offer non-exclusive royalty-bearing licenses to certain of our key patents to all tow truck and car carrier manufacturers.
 
Our trademarks “Century,” “Holmes,” “Champion,” “Challenger,” “Formula I,” “Pro Star,” “Street Runner,” “Vulcan,” “Right Approach” and “Extreme Angle,” among others, are registered with the United States Patent and Trademark Office.  Management believes that our trademarks are well-recognized by dealers, distributors and end-users in their respective markets and are associated with a high level of quality and value.
 
Government Regulations and Environmental Matters
 
Our operations are subject to federal, state and local laws and regulations relating to the generation, storage, handling, emission, transportation and discharge of materials into the environment.  Management believes that we are in substantial compliance with all applicable federal, state and local provisions relating to the protection of the environment.  The costs of complying with environmental protection laws and regulations has not had a material adverse impact on our financial condition or results of operations in the past and is not expected to have a material adverse impact in the future.
 
We are also subject to the Magnuson-Moss Warranty Federal Trade Commission Improvement Act which regulates the description of warranties on products.  The description and substance of our warranties are also subject to a variety of federal and state laws and regulations applicable to the manufacturing of vehicle components.  Management believes that continued compliance with various government regulations will not materially affect our operations.
 
Executive Officers of the Registrant
 
Information relating to our executive officers as of the end of the period covered by this Annual Report is set forth below.  William G. Miller, II is the son of William G. Miller.  Other than Messrs Miller and Miller, there are no family relationships among the executive officers, directors or nominees for director, nor are there any arrangements or understandings between any of the executive officers and any other persons pursuant to which they were selected as executive officers.
 
 
6

 
 
Name
 
Age
 
Position
         
William G. Miller
 
66
 
Chairman of the Board
         
Jeffrey I. Badgley
 
60
 
Chief Executive Officer
         
Frank Madonia
 
64
 
Executive Vice President, Secretary and General Counsel
         
J. Vincent Mish
 
62
 
Executive Vice President, Chief Financial Officer and Treasurer
         
William G. Miller, II
 
34
 
President
         
Vincent J. Tiano
 
48
 
Vice President, Sales - North America
 
William G. Miller has served as Chairman of the Board since April 1994.  Mr. Miller served as our Chief Executive Officer from April 1994 until June 1997, and as our Co-Chief Executive Officer from October 2003 until March 2011.  In June 1997, he was named Co-Chief Executive Officer, a title he shared with Jeffrey I. Badgley until November 1997.  Mr. Miller also served as our President from April 1994 to June 1996.  He served as Chairman of Miller Group, Inc. from August 1990 through May 1994, as its President from August 1990 to March 1993, and as its Chief Executive Officer from March 1993 until May 1994.  Prior to 1987, Mr. Miller served in various management positions for Bendix Corporation, Neptune International Corporation, Wheelabrator-Frye, Inc. and The Signal Companies, Inc.
 
Jeffrey I. Badgley has served as our Chief Executive Officer since March 2011, after serving as our President from June 1996 until March 2011 and as our Co-Chief Executive Officer with Mr. Miller from October 2003 until March 2011.  Mr. Badgley has served as a director since January 1996.  Mr. Badgley served as our Chief Executive Officer from November 1997 to October 2003.  In June 1997, he was named our Co-Chief Executive Officer, a title he shared with Mr. Miller until November 1997.  Mr. Badgley served as our Vice President from 1994 to 1996, and as our Chief Operating Officer from June 1996 to June 1997.  In addition, Mr. Badgley has served as President of Miller Industries Towing Equipment Inc. since 1996.  Mr. Badgley served as Vice President—Sales of Miller Industries Towing Equipment Inc. from 1988 to 1996.  He previously served as Vice President—Sales and Marketing of Challenger Wrecker Corporation from 1982 until joining Miller Industries Towing Equipment Inc.
 
Frank Madonia has served as our Executive Vice President, Secretary and General Counsel since September 1998.  From April 1994 to September 1998 Mr. Madonia served as our Vice President, General Counsel and Secretary.  Mr. Madonia served as Secretary and General Counsel to Miller Industries Towing Equipment Inc. since its acquisition by Miller Group in 1990.  From July 1987 through April 1994, Mr. Madonia served as Vice President, General Counsel and Secretary of Flow Measurement.  Prior to 1987, Mr. Madonia served in various legal and management positions for United States Steel Corporation, Neptune International Corporation, Wheelabrator-Frye, Inc. and The Signal Companies, Inc.
 
J. Vincent Mish is a certified public accountant and has served as our Chief Financial Officer and Treasurer since June 1999, a position he also held from April 1994 through September 1996.  In December 2002, Mr. Mish was appointed as our Executive Vice President.  He also has served as President of the Financial Services Group since September 1996 and as a Vice President of Miller Industries since April 1994.  Mr. Mish served as Vice President and Treasurer of Miller Industries Towing Equipment Inc. since its acquisition by Miller Group in 1990.  From February 1987 through April 1994, Mr. Mish served as Vice President and Treasurer of Flow Measurement.  Mr. Mish worked with Touche Ross & Company (now Deloitte and Touche) for over ten years before serving as Treasurer and Chief Financial Officer of DNE Corporation from 1982 to 1987.  Mr. Mish is a member of the American Institute of Certified Public Accountants and the Tennessee and Michigan Certified Public Accountant societies.
 
William G. Miller, II has served as President since March 2011, after serving as a Regional Vice President of Sales of Miller Industries Towing Equipment Inc. from November 2009 to February 2011.  Mr. Miller served as Vice President of Strategic Planning of the Company from October 2007 until November 2009.  Mr. Miller served as Light Duty General Manager from November 2004 to October 2007 and as a Sales Representative of Miller Industries Towing Equipment Inc. from 2002 to 2004.
 
 
7

 
 
Vincent J. Tiano has served as Vice President, Sales – North America of the Company since March 2011.  From March 2008 to March 2011 Mr. Tiano served as Vice President of Miller Industries Towing Equipment Inc.  From May 1997 to March 2008, Mr. Tiano served as Director, Chassis and Trailer Division of Miller Industries Towing Equipment Inc.  Mr. Tiano served as a sales representative for Kenworth of Tennessee from January 1993 to April 1997.
 
Available Information
 
Our Internet website address is www.millerind.com.  We make available free of charge through our website our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K, and amendments to those reports, as soon as reasonably practicable after we file them with, or furnish them to, the Securities and Exchange Commission.  Our Corporate Governance Guidelines and Code of Business Conduct and Ethics are also available on our website.  Other corporate governance-related documents can be found at our website as well.
 
ITEM 1A.               RISK FACTORS
 
There are many factors that affect our business and the results of our operations, some of which are beyond our control.  The following is a description of all known material risks that may cause the actual results of our operations in future periods to differ materially from those currently expected or desired.  We encourage you to read this section carefully.
 
Our business is subject to the cyclical nature of our industry and changes in consumer confidence and in economic conditions in general.  Adverse changes or continued uncertainty with respect to these factors may lead to a downturn in our business.
 
The towing and recovery industry is cyclical in nature and historically the industry has been affected by changes in consumer confidence and in economic conditions in general.  Concerns over the slow economic recovery and continued volatility and disruption in domestic and international capital and credit markets have caused significant erosion in consumer confidence.  As a result, the overall demand for our products from our commercial customers has been negatively affected, and the level of future sales of our products is uncertain.  A prolonged economic downturn, and slow or negative growth in the domestic and global economy, may continue to have a material adverse effect on our business, financial condition and results of operations for the foreseeable future.
 
Our demand from our customers and towing operators is affected by the availability of capital and access to credit.
 
The ability of our customers and of towing operators to purchase our products is affected by the availability of capital and credit to them.  Our independent distributor customers rely on floor plan financing in connection with the purchase of our products, and the availability of that financing on acceptable terms has a direct effect on the volume of their purchases.  Additionally, in many cases, a towing operator’s decision to purchase our products from one of our distributors is dependent upon their ability to obtain financing upon acceptable terms.  Volatility and disruption in the capital and credit markets, principally in the U.S. and Europe, has decreased the availability of capital to, and credit capacity of, our customers and towing operators.  In addition, in the past, certain providers of floor plan financing have exited the market, which made floor plan financing increasingly difficult for our independent distributor customers to secure at those times.  This reduced availability of capital and credit has negatively affected the ability and capacity of our customers and of towing operators to purchase towing and related equipment.  This, in turn, has negatively impacted sales of our products.  If customers are unable to access capital or credit, it could materially and adversely affect our ability to sell our products, and as a result, could negatively affect our business and operating results.
 
 
8

 
 
A significant reduction in sales to governmental entities through prime contractors could adversely affect our results of operations.
 
For 2011, 2010 and 2009, 26.8%, 18.5% and 19.4%, respectively, of our consolidated net sales were made to the U.S. federal government through prime contractors.  Prior to 2009 and for 2012, no one customer accounted for more than 10% of our consolidated net sales in any fiscal year.  The loss of our U.S. government work, in whole or in part, or the failure to secure follow-on orders from the U.S. government could adversely affect our results of operations. At this time we are do not expect to receive additional follow-on U.S. government-related orders in the near term.  In addition, our domestic and foreign government business is subject to the following risks, among others: (i) this business is susceptible to changes in government spending, which may reduce future revenues; (ii) most of our contracts with governmental entities through prime contractors are fixed-price contracts, and our actual costs on any of these contracts could exceed our projected costs, (iii) competition for the award of these contracts is intense, and we may not be successful in bidding on future contracts, and (iv) the products we sell to governmental entities are subject to highly technical requirements, and any failure to comply with these requirements could result in unanticipated retrofit costs, delayed acceptance of products, late or reduced payment or cancellation of the contract. We continue to work to secure additional domestic and foreign governmental orders, but we cannot predict the success or timing of any such efforts.
 
Our dependence upon outside suppliers for our raw materials, including aluminum, steel, petroleum-related products and other purchased component parts, leaves us subject to changes in price and delays in receiving supplies of such materials or parts.
 
We are dependent upon outside suppliers for our raw material needs and other purchased component parts, and although we believe that these suppliers will continue to meet our requirements and specifications, and that alternative sources of supply are available, events beyond our control could have an adverse effect on the cost or availability of raw materials and component parts.  Shipment delays, unexpected price increases or changes in payment terms from our suppliers of raw materials or component parts could impact our ability to secure necessary raw materials or component parts, or to secure such materials and parts at favorable prices.  To partially offset price increases for raw materials and component parts, we have, from time to time, implemented general price increases and cost surcharges.  While we have attempted to pass these increased costs on to our customers, there can be no assurance that we will be able to continue to do so.  Additionally, demand for our products could be negatively affected by the unavailability of truck chassis, which are manufactured by third parties and are frequently supplied by us, or are purchased separately by our distributors or by towing operators.  Although we believe that sources of our raw materials and component parts will continue to be adequate to meet our requirements and that alternative sources are available, shortages, price increases or delays in shipments of our raw materials and component parts could have a material adverse effect on our financial performance, competitive position and reputation.
 
Overall demand from our customers may be affected by increases in their fuel and insurance costs and changes in weather conditions.
 
In the past, our customers have experienced substantial increases in fuel and other transportation costs, and in the cost of insurance, and while many of these costs have remained stable since 2010, there can be no assurance that these costs will not continue to be volatile, or again increase, for our customers in the future.  Additionally, our customers also have, from time to time, been subject to unpredictable and varying weather conditions which could, among other things, impact the cost and availability of fuel and other materials.  Any of these factors could negatively affect the ability of our customers to purchase, and their capacity for purchasing, towing and related equipment, and, consequently, have a material negative effect upon our business and operating results.
 
Our international operations are subject to various political, economic and other uncertainties that could adversely affect our business results, including by restrictive taxation or other government regulation and by foreign currency fluctuation.
 
A significant portion of our net sales and production in 2012 were outside the United States, primarily in Europe.  As a result, our operations are subject to various political, economic and other uncertainties, including risks of restrictive taxation policies, changing political conditions and governmental regulations.  Also, a substantial portion of our net sales derived outside the United States, as well as salaries of employees located outside the United States and certain other expenses, are denominated in foreign currencies, including the British pound and the Euro.  We are, therefore, subject to risk of financial loss resulting from fluctuations in exchange rates of these currencies against the U.S. dollar.
 
 
9

 
 
Our competitors could impede our ability to attract or retain customers.
 
The towing and recovery equipment manufacturing industry is highly competitive.  Competition for sales exists domestically and internationally at the manufacturer, distributor and towing-operator levels and is based primarily on product quality and innovation, reputation, technology, customer service, product availability and price.  Competition for sales also comes from the market for used towing and recovery equipment.  Certain of our competitors may have substantially greater financial and other resources and may provide more attractive dealer and retail customer financing alternatives than us.  If these competitors are able to make it more difficult for us to attract or retain customers, it could have a negative impact on our sales, revenue and financial performance.
 
Our future success depends upon our ability to develop or acquire proprietary products and technology.
 
Historically, we have been able to develop or acquire patented and other proprietary product innovations which have allowed us to produce what management believes to be technologically advanced products relative to most of our competition.  However, certain of our patents have expired, and others will expire in the next few years, and as a result, we may not have a continuing competitive advantage through proprietary products and technology.  In addition, pursuant to the terms of a consent judgment entered into in 2000 with the Antitrust Division of the U.S. Department of Justice, we are required to offer non-exclusive royalty-bearing licenses to certain of our key patents to all wrecker and car carrier manufacturers.  If we are unable to develop or acquire new products and technology in the future, our ability to maintain market share, and, consequently, our revenues and operating results, may be negatively affected.
 
We depend upon skilled labor to manufacture our products, and if we experience problems hiring and retaining skilled labor, our business may be negatively affected.
 
The timely manufacture and delivery of our products requires an adequate supply of skilled labor, and the operating costs of our manufacturing facilities can be adversely affected by high turnover in skilled positions.  Accordingly, our ability to increase sales, productivity and net earnings will be limited to a degree by our ability to employ the skilled laborers necessary to meet our requirements.  There can be no assurance that we will be able to maintain an adequate skilled labor force necessary to efficiently operate our facilities.  In addition, while our employees are not currently members of a union, there can be no assurance that the employees at any of our facilities will not choose to become unionized in the future.
 
Any loss of the services of our key executives could have a material adverse impact on our operations.
 
Our success is highly dependent on the continued services of our management team.  The loss of services of one or more key members of our senior management team could have a material adverse effect on us.
 
A product liability claim in excess of our insurance coverage, or an inability to acquire or maintain insurance at commercially reasonable rates, could have a material adverse effect upon our business.
 
We are subject to various claims, including product liability claims arising in the ordinary course of business, and may at times be a party to various legal proceedings incidental to our business.  We maintain reserves and liability insurance coverage at levels based upon commercial norms and our historical claims experience.  A successful product liability or other claim brought against us in excess of our insurance coverage, or the inability of us to acquire or maintain insurance at commercially reasonable rates, could have a material adverse effect upon our business, operating results and financial condition.
 
Our stock price may fluctuate greatly as a result of the general volatility of the stock market.
 
From time to time, there may be significant volatility in the market price for our common stock.  Our quarterly operating results, changes in earnings estimated by analysts, if any, changes in general conditions in our industry or the economy or the financial markets or other developments affecting us, including our ability to pay dividends, could cause the market price of our common stock to fluctuate substantially.
 
 
10

 
 
Our charter and bylaws contain anti-takeover provisions that may make it more difficult or expensive to acquire us in the future or may negatively affect our stock price.
 
Our charter and bylaws contain restrictions that may discourage other persons from attempting to acquire control of us, including, without limitation, prohibitions on shareholder action by written consent and advance notice requirements regarding amendments to certain provisions of our charter and bylaws.  In addition, our charter authorizes the issuance of up to 5,000,000 shares of preferred stock.  The rights and preferences for any series of preferred stock may be set by the board of directors, in its sole discretion and without shareholder approval, and the rights and preferences of any such preferred stock may be superior to those of common stock and thus may adversely affect the rights of holders of common stock.
 
The requirements and restrictions imposed by our current credit facility restrict our ability to operate our business, and failure to comply with these requirements and restrictions could adversely affect our business.
 
The terms of our current credit facility restrict our ability and our subsidiaries’ ability to, among other things, incur additional indebtedness, guarantee the indebtedness of another person, pay dividends or make loans or investments in certain situations, incur liens, sell, discount or dispose of accounts receivable or promissory notes, enter into any new line of business, permit certain loans to officers or employees, sell, transfer, convey or grant any security interest in any material trademark, merge or consolidate with any other person, or sell, transfer or dispose of all or substantially all of our assets.  Our current credit facility also requires us to meet certain financial tests, and to comply with certain other reporting, affirmative and negative covenants.
 
If we fail to comply with the requirements of our current credit facility, such non-compliance would result in an event of default.  If not waived by the bank, such event of default would result in the acceleration of any amounts due under the current credit facility, and may permit the bank to foreclose on our assets.
 
ITEM 1B                UNRESOLVED STAFF COMMENTS
 
None.
 
PROPERTIES
 
We operate four manufacturing facilities in the United States.  The facilities are located in Ooltewah (Chattanooga), Tennessee; Hermitage, Pennsylvania; Mercer, Pennsylvania; and Greeneville, Tennessee.  The Ooltewah plant, containing approximately 302,000 square feet, produces light and heavy duty wreckers; the Hermitage plant, containing approximately 118,000 square feet, produces car carriers; the Mercer plant, containing approximately 110,000 square feet, produces car carriers and light duty wreckers; and the Greeneville plant, containing approximately 117,000 square feet, produces car carriers and trailers.
 
We also have manufacturing operations at two facilities located in the Lorraine region of France, which have, in the aggregate, approximately 180,000 square feet, and manufacturing operations in Norfolk, England, with approximately 48,000 square feet.
 
LEGAL PROCEEDINGS
 
We are, from time to time, a party to litigation arising in the normal course of our business.  Litigation is subject to various inherent uncertainties, and it is possible that some of these matters could be resolved unfavorably to us, which could result in substantial damages against us.  We have established accruals for matters that are probable and reasonably estimable and maintain product liability and other insurance that management believes to be adequate.  Management believes that any liability that may ultimately result from the resolution of these matters in excess of available insurance coverage and accruals will not have a material adverse effect on our consolidated financial position or results of operations.
 
MINE SAFETY DISCLOSURES
 
Not applicable.
 
 
11

 
 
PART II
 
MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
 
Market Price of and Dividends on the Registrant’s Common Equity and Related Stockholder Matters
 
Our common stock is traded on the New York Stock Exchange under the symbol “MLR.”  The following table sets forth the quarterly range of high and low sales prices for the common stock for the periods indicated.
 
   
Price Range of Common Stock
 
Period
 
High
   
Low
 
Year Ended December 31, 2011
           
First Quarter                                                                                    
  $ 17.20     $ 14.30  
Second Quarter                                                                                    
    18.85       15.04  
Third Quarter                                                                                    
    20.05       14.65  
Fourth Quarter                                                                                    
    21.29       14.78  
Year Ended December 31, 2012
               
First Quarter                                                                                    
  $ 17.80     $ 14.80  
Second Quarter                                                                                    
    17.56       13.55  
Third Quarter                                                                                    
    17.18       14.50  
Fourth Quarter                                                                                    
    16.45       14.00  
Year Ending December 31, 2013
               
       First Quarter (through February 28, 2013)   $ 17.23     $ 14.91  
 
The approximate number of holders of record and beneficial owners of common stock as of December 31, 2012 was 542 and 2,250 respectively.
 
Prior to March 2010, we had never declared cash dividends on our common stock.  On March 8, 2010, our board of directors adopted a dividend policy to consider and pay annual cash dividends subject to our ability to satisfy all applicable statutory and regulatory requirements and our continued financial strength.  On May 10, 2011, the Company’s board of directors approved a dividend policy to consider and pay quarterly dividends on its common stock subject to the Company’s ability to satisfy all applicable statutory requirements and the Company’s continued financial strength, replacing the previous policy of paying annual cash dividends.  Dividend payments made for 2012, 2011 and 2010 were as follows:
 
 
Payment
 
Record Date
 
Payment Date
 
Dividend
(per share)
   
Amount
(in thousands)
2010 (Annual)
March 18, 2010
March 25, 2010
  $ 0.10     $ 1,163  
                     
Q1 2011
March 17, 2011
March 24, 2011
  $ 0.12     $ 1,415  
Q2 2011
May 23, 2011
May 31, 2011
    0.12       1,429  
Q3 2011
August 19, 2011
August 26, 2011
    0.12       1,365  
Q4 2011
December 5, 2011
December 19, 2011
    0.12       1,336  
Total for 2011
      $ 0.48     $ 5,545  
                     
Q1 2012
March 19, 2012
March 26, 2012
  $ 0.13     $ 1,437  
Q2 2012
June 18, 2012
June 25, 2012
    0.13       1,439  
Q3 2012
September 17, 2012
September 24, 2012
    0.13       1,439  
Q4 2012
December 10, 2012
December 17, 2012
    0.13       1,447  
Total for 2012
      $ 0.52     $ 5,762  
 
 
12

 
 
Any future determination as to the payment of cash dividends will depend upon such factors as earnings, capital requirements, our financial condition, restrictions in financing agreements and other factors deemed relevant by our board of directors.  Covenants under our current credit facility restrict the payment of cash dividends if the Company would be in violation of the minimum tangible net worth test or the leverage ratio test in the current loan agreement as a result of the dividend, among various other restrictions.
 
Sales of Unregistered Securities
 
We did not sell any unregistered securities during the year ended December 31, 2012.
 
Performance Graph
 
The following line graph compares the percentage change in the cumulative shareholder return of our common stock with The New York Stock Exchange Composite Index and the Standard & Poor’s Construction Index over the period of time from December 31, 2007 through December 31, 2012.  The respective returns assume reinvestment of dividends paid.
 
(LINE GRAPH)
 
   
12/31/07
   
12/31/08
   
12/31/09
   
12/31/10
   
12/30/11
   
12/31/12
 
Miller Industries, Inc.
    100       39       83       104       115       111  
NYSE Composite Index
    100       59       74       82       77       92  
S&P Construction Index
    100       41       67       116       102       118  
 
 
13

 
 
SELECTED FINANCIAL DATA
 
The following table presents selected statements of income data and selected balance sheet data on a consolidated basis.  We derived the selected historical consolidated financial data from our audited consolidated financial statements and related notes.  You should read this data together with Item 7–”Management’s Discussion and Analysis of Financial Condition and Results of Operation” and our consolidated financial statements and related notes that are a part of this Annual Report on Form 10 K.
 
   
Years Ended December 31,
 
   
2012
   
2011
   
2010
   
2009
   
2008
 
   
(In thousands except per share data)
 
Statements of Income Data:
                             
                               
Net Sales
  $ 342,663     $ 412,659     $ 306,897     $ 237,567     $ 270,989  
Costs and Expenses:
                                       
Costs of operations
    302,606       342,557       260,566       202,272       237,362  
Selling, general, and administrative expenses
    27,507       31,407       26,665       24,905       25,940  
Interest expense, net
    712       728       305       883       1,241  
Other Expense (Income)
    (815 )     (161 )     71       (442 )     678  
Total costs and expenses
    330,010       374,531       287,607       227,618       265,221  
                                         
Income before income taxes
    12,653       38,128       19,290       9,949       5,768  
Income tax provision
    3,531       15,120       7,583       3,933       2,182  
Net income
  $ 9,122     $ 23,008     $ 11,707     $ 6,016     $ 3,586  
Basic income per common share
  $ 0.82     $ 1.98     $ 1.00     $ 0.52     $ 0.31  
Diluted income per common share
  $ 0.82     $ 1.92     $ 0.96     $ 0.51     $ 0.31  
Weighted average shares outstanding:
                                       
Basic
    11,068       11,600       11,671       11,611       11,594  
Diluted
    11,258       11,984       12,163       11,902       11,656  
 
   
December 31,
 
   
2012
   
2011
   
2010
   
2009
   
2008
 
       
Balance Sheet Data:
                             
Working capital
  $ 115,178     $ 109,760     $ 106,831     $ 94,247     $ 79,364  
Total assets
    202,351       211,842       199,876       172,320       174,281  
Long-term obligations, less current portion
    --       --       5       185       2,417  
Common shareholders’ equity
    157,490       152,651       150,568       141,439       131,972  
 
   
December 31,
 
   
2012
   
2011
   
2010
   
2009
   
2008
 
       
Other Data:
                             
Cash dividend per common share
  $ 0.52     $ 0.48     $ 0.10     $ --     $ --  
 
 
14

 
 
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
 
The following discussion of our results of operations and financial condition should be read in conjunction with the Consolidated Financial Statements and Notes thereto.
 
Executive Overview
 
Miller Industries, Inc. is the world’s largest manufacturer of vehicle towing and recovery equipment, with domestic manufacturing subsidiaries in Tennessee and Pennsylvania, and foreign manufacturing subsidiaries in France and the United Kingdom.  We offer a broad range of equipment to meet our customers’ design, capacity and cost requirements under our Century®, Vulcan®, Challenger®, Holmes®, Champion®, Chevron™, Eagle®, Titan®, Jige™ and Boniface™ brand names.
 
Our management focuses on a variety of key indicators to monitor our overall operating and financial performance.  These indicators include measurements of revenue, operating income, gross margin, net income, earnings per share, capital expenditures and cash flow.
 
We derive revenues primarily from product sales made through our network of domestic and foreign independent distributors.  Our revenues are sensitive to a variety of factors including general economic conditions as well as demand for, and price of, our products, our technological competitiveness, our reputation for providing quality products and reliable service, competition within our industry and the cost of raw materials (including aluminum, steel and petroleum-related products).
 
Our industry is cyclical in nature and in recent years the overall demand for our products and our resulting revenues continued to be negatively affected by:
 
 
wavering levels of consumer confidence;
 
 
volatility and disruption in domestic and international capital and credit markets and the resulting decrease in the availability of financing, including floor plan financing, for our customers and towing operators;
 
 
significant periodic increases in fuel and insurance costs and their negative effect on the ability of our customers to purchase towing and related equipment;
 
 
the overall effects of the global economic downturn;
 
 
and, currently, the slow economic recovery.
 
We remain concerned about the continuing effects of these factors on the towing and recovery industry, and have continued certain steps implemented to lower costs in response to these uncertainties.  These steps included headcount reductions for certain non-production personnel and reductions in certain administrative expenses.  We will continue to monitor our cost structure to ensure that it remains in line with business conditions.
 
In addition, we have been and will continue to be affected by changes in the prices that we pay for raw materials, particularly aluminum, steel, petroleum-related products and other raw materials, which represent a substantial part of our total cost of operations.  In the past, as we have determined necessary, we have implemented price increases to offset these higher costs.  We also developed alternatives to some of the components used in our production process that incorporate these raw materials, and our suppliers have implemented these alternatives in the production of our component parts.  We continue to monitor raw material prices and availability in order to more favorably position the Company in this dynamic market.
 
There were no borrowings under our current credit facility at December 31, 2012.
 
 
15

 
 
Critical Accounting Policies
 
Our consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States of America, which require us to make estimates.  Certain accounting policies are deemed “critical,” as they require management’s highest degree of judgment, estimates and assumptions.  A discussion of critical accounting policies, the judgments and uncertainties affecting their application and the likelihood that materially different amounts would be reported under different conditions or using different assumptions follows:
 
Accounts Receivable
 
We extend credit to customers in the normal course of business.  Collections from customers are continuously monitored and an allowance for doubtful accounts is maintained based on historical experience and any specific customer collection issues.  While such bad debt expenses have historically been within expectations and the allowance established, there can be no assurance that we will continue to experience the same credit loss rates as in the past.
 
Inventory
 
Inventory costs include materials, labor and factory overhead. Inventories are stated at the lower of cost or market (net realizable value), determined on a first-in, first-out basis.  Appropriate consideration is given to obsolescence, valuation and other factors in determining net realizable value.  Revisions of these estimates could result in the need for adjustments.
 
Long-Lived Assets
 
Long-lived assets are reviewed for impairment whenever events or circumstances indicate that the carrying amount of these assets may not be fully recoverable.  When a determination has been made that the carrying amount of long-lived asset may not be fully recovered, the amount of impairment is measured by comparing an asset’s estimated fair value to its carrying value.  The determination of fair value is based on projected future cash flows discounted at a rate determined by management, or if available independent appraisals or sales price negotiations.  The estimation of fair value includes significant judgment regarding assumptions of revenue, operating costs, interest rates, property and equipment additions, and industry competition and general economic and business conditions among other factors.  We believe that these estimates are reasonable; however, changes in any of these factors could affect these evaluations.  Based on these estimates, we believe that our long-lived assets are appropriately valued.
 
Goodwill
 
Goodwill is tested for impairment annually or if an event or circumstance occurs that would more likely than not reduce the fair value of the reporting unit below the carrying amount.  Goodwill is reviewed for impairment utilizing a qualitative assessment or a two-step process.  If we choose to perform a qualitative analysis of goodwill and determine that fair value more likely than not exceeds the carrying value, no further testing is needed.  If we choose the two-step approach, the first step identifies potential impairment by comparing the fair value of the reporting unit with its carrying value.  If the fair value exceeds the carrying value the second step is not necessary.  If the carrying value is more than the fair value, the second step of testing is performed to compare the fair value of the goodwill with its carrying value.  An impairment loss would be recognized to the extent that the carrying value of the goodwill exceeds it fair value.  We cannot predict the occurrence of certain events or changes in circumstances that might adversely affect the carrying value of goodwill.  Such events might include, but are not limited to, the impact of the economic environment or a material change in a relationship with significant customers.
 
Warranty Reserves
 
We estimate expense for product warranty claims at the time products are sold.  These estimates are established using historical information about the nature, frequency, and average cost of warranty claims.  We review trends of warranty claims and take actions to improve product quality and minimize warranty claims.  We believe the warranty reserve is adequate; however, actual claims incurred could differ from the original estimates, requiring adjustments to the accrual.
 
 
16

 
 
Income Taxes
 
We recognize deferred tax assets and liabilities based on differences between the financial statement carrying amounts and the tax bases of assets and liabilities.  We consider the need to record a valuation allowance to reduce deferred tax assets to the amount that is more likely than not to be realized.  We consider tax loss carryforwards, reversal of deferred tax liabilities, tax planning and estimates of future taxable income in assessing the need for a valuation allowance.  If uncertain tax positions exist, we record interest and penalties related to the uncertain tax positions as income tax expense in our consolidated statements of income.
 
Revenues
 
Under our accounting policies, revenues are recorded when the risk of ownership for products has transferred to independent distributors or other customers, which generally occurs on shipment.  From time to time, revenue is recognized under a bill and hold arrangement.  Recognition of revenue on bill and hold arrangements occurs when risk of ownership has passed to the customer, a fixed written commitment has been provided by the customer, the goods are complete and ready for shipment, the goods are segregated from inventory, no performance obligation remains, and a schedule for delivery has been established.  While we manufacture only the bodies of wreckers, which are installed on truck chassis manufactured by third parties, we frequently purchase the truck chassis for resale to our customers.  Sales of company-purchased truck chassis are included in net sales.  Margin percentages are substantially lower on completed recovery vehicles containing company-purchased chassis because the markup over the cost of the chassis is nominal.
 
Foreign Currency Translation
 
The functional currency for our foreign operations is the applicable local currency.  The translation from the applicable foreign currencies to U.S. dollars is performed for balance sheet accounts using current exchange rates in effect at the balance sheet date, historical rates for equity and the weighted average exchange rate during the period for revenue and expense accounts.  Foreign currency translation adjustments are included in shareholders’ equity.  Intercompany transactions denominated in a currency other than the functional currency are remeasured into the functional currency.  Gains and losses resulting from foreign currency transactions are included in other income and expense in our consolidated statements of income.
 
Results of Operations
 
The following table sets forth, for the years indicated, the components of the consolidated statements of income expressed as a percentage of net sales.
 
   
2012
   
2011
   
2010
 
Net Sales
    100.0 %     100.0 %     100.0 %
Costs and expenses:
                       
Costs of operations
    88.3 %     83.0 %     84.8 %
Selling, general and administrative
    8.0 %     7.6 %     8.6 %
Interest expense
    0.2 %     0.2 %     0.1 %
Other Expense (Income)
    (0.2 )%     (0.0 )%     0.2 %
Total costs and expenses
    96.3 %     90.8 %     93.7 %
Income before income taxes
    3.7 %     9.2 %     6.3 %
 
Year Ended December 31, 2012 Compared to Year Ended December 31, 2011
 
Net sales were $342.7 million for the year ended December 31, 2012, compared to $412.7 million for the year ended December 31, 2011, a decrease of 17.0%.   The decrease in net sales was attributable to the absence of revenues in 2012 from follow-on orders from a prime contractor for government-related sales, which represented 26.8% of total 2011 sales, offset partially by increased activity from our commercial customers.
 
Costs of operations decreased 11.7% to $302.6 million for the year ended December 31, 2012 from $342.6 million for the year ended December 31, 2011, which was attributable to decreases in governmental sales described above.  Overall, costs of operations as a percentage of net sales increased from 83.0% for the year ended December 31, 2011 to 88.3% for the year ended December 31, 2012, primarily due to product mix during the period consisting of a higher percentage of lower margin chassis sales.
 
 
17

 
 
Selling, general and administrative expenses for the year ended December 31, 2012 decreased to $27.5 million from $31.4 million for the year ended December 31, 2011.  The decrease in expenses was primarily attributable to the lower sales levels during the period, and resulting decreased sales commissions and incentives.  As a percentage of net sales, selling, general and administrative expenses increased to 8.0% for 2012 from 7.6% for 2011 due to the fixed nature of certain of these expenses.
 
Interest expense remained constant at $0.7 million for the year ended December 31, 2012 and for 2011.
 
Other expense (income) relates to foreign currency transaction gains and losses.  During 2012, the net gain was $0.8 million compared to a net gain of $0.2 million for 2011.
 
The provision for income taxes for the years ended December 31, 2012 and 2011 reflects a combined federal, state and foreign tax rate of 27.9% and 39.7%, respectively.  Income taxes for 2012 include income tax benefits of approximately $1.4 million.  The benefits resulted primarily from Federal Domestic Production Activity Deductions as well as from Federal Research and Development and other tax credits recognized in the period.
 
Year Ended December 31, 2011 Compared to Year Ended December 31, 2010
 
Net sales were $412.7 million for the year ended December 31, 2011, compared to $306.9 million for the year ended December 31, 2010, an increase of 34.5%.  This increase is primarily attributable to increased revenues from a prime contractor for a government-related order described above, as well as increased activity from our commercial customers.
 
Costs of operations increased 31.5% to $342.6 million for the year ended December 31, 2011 from $260.6 million for the year ended December 31, 2010, which was attributable to the increase in commercial and governmental sales described above.  Overall, costs of operations as a percentage of net sales decreased slightly from 84.8% for the year ended December 31, 2010 to 83.0% for the year ended December 31, 2011, primarily due to product mix during the year consisting of a lower percentage of lower margin chassis sales.
 
Selling, general and administrative expenses for the year ended December 31, 2011 increased to $31.4 million from $26.7 million for the year ended December 31, 2010.  The increase was attributable to higher sales levels, as well as increased sales commissions, incentives and medical costs.  As a percentage of net sales, selling, general and administrative expenses decreased to 7.6% for 2011 from 8.6% for 2010 due to the fixed nature of certain of these expenses.
 
Interest expense increased to $0.7 million for the year ended December 31, 2011 from $0.3 million for the year ended December 31, 2010, primarily due to increases in interest on chassis purchases.
 
Other expense (income) relates to foreign currency transaction gains and losses.  During 2011, the net gain was $0.2 million compared to a net loss of $0.1 million for 2010.
 
The provision for income taxes for the years ended December 31, 2011 and 2010 reflects a combined federal, state and foreign tax rate of 39.7% and 39.3%, respectively.
 
Liquidity And Capital Resources
 
Cash provided by operating activities was $6.1 million for the year ended December 31, 2012, compared to $28.3 million for the year ended December 31, 2011, and $17.5 million for the year ended December 31, 2010.  The cash provided by operating activities for 2012 is attributable to net income and decreases in accounts receivable and inventory offset by decreases in accounts payable and accrued liabilities.  These changes are primarily attributable to lower production volumes overall and increases in activity from our commercial customers including increased chassis purchases and sales.
 
 
18

 
 
Cash used in investing activities was $2.8 million for the year ended December 31, 2012, compared to $2.8 million for the year ended December 31, 2011, and $4.9 million for the year ended December 31, 2010.  The cash used in investing activities for 2012 was primarily for the purchase of property, plant and equipment.
 
Cash used in financing activities was $4.5 million for the year ended December 31, 2012, compared to $21.5 million for the year ended December 31, 2011, and $0.9 million for the year ended December 31, 2010.  The cash used in financing activities in 2012 was primarily to pay cash dividends, partially offset by proceeds from the exercise of stock options.  For 2011, cash used in financing was primarily used for stock repurchases.
 
Over the past year, we generally have used available cash flow from operations to pay dividends and to pay for capital expenditures.
 
As of December 31, 2012, we had cash and cash equivalents of $48.6 million, exclusive of unused availability under our current credit facility.  Our primary cash requirements include working capital, capital expenditures and the funding of any declared cash dividends.  We expect our primary sources of cash to be cash flow from operations and cash and cash equivalents on hand at December 31, 2012, with borrowings under our current credit facility being available if needed.  We expect these sources to be sufficient to satisfy our cash needs during 2013 and for the next several years.  However, our ability to satisfy our cash needs will substantially depend upon a number of factors including our future operating performance, taking into account the economic and other factors discussed above and elsewhere in this Annual Report, as well as financial, business and other factors, many of which are beyond our control.
 
Contractual Obligations
 
The following is a summary of our contractual obligations as of December 31, 2012.
 
   
Payment Due By Period (in thousands)
 
Contractual Obligations (1)
 
Total
   
Less than
1 year
   
1-3 years
   
3-5 years
   
More than
5 years
 
Operating Lease Obligations
  $ 672     $ 324     $ 334     $ 14     $ --  
Purchase Obligations (2)
    23,981       23,981       --       --       --  
Commitments for construction and acquisition of plant and equipment
    477       477       --       --       --  
Total
  $ 25,130     $ 24,782     $ 334     $ 14     $ --  


 
(1)
Amounts do not include potential contingent obligations of $22.0 million under repurchase commitments with third-party lenders in the event of independent distributor customer default.
 
(2)
Purchase obligations represent open purchase orders for raw materials and other components issued in the normal course of business.
 
Credit Facility and Other Obligations
 
Credit Facility
 
On April 6, 2010 we entered into a Loan Agreement with First Tennessee Bank National Association for a $20.0 million unsecured revolving credit facility.  On December 21, 2011, the credit facility was renewed and our unsecured revolving credit facility was increased to $25.0 million.  On December 10, 2012, the credit facility was further renewed to extend the maturity date to March 31, 2015.  The current credit facility contains customary representations and warranties, events of default, and financial, affirmative and negative covenants for loan agreements of this kind.  Covenants under the current credit facility restrict the payment of cash dividends if the Company would be in violation of the minimum tangible net worth test or the leverage ratio test in the current loan agreement as a result of the dividend, among various restrictions.
 
 
19

 
 
In the absence of a default, all borrowings under the current credit facility bear interest at the LIBOR Rate plus 1.50% per annum.  The Company will pay a non-usage fee under the current loan agreement at a rate per annum equal to between 0.15% and 0.35% of the unused amount of the current credit facility, which fee shall be paid quarterly.
 
Outstanding Borrowings
 
There were no outstanding borrowings under the credit facility as of December 31, 2012 and 2011.
 
Interest Rate Sensitivity
 
Changes in interest rates affect the interest paid on indebtedness under our credit facility because the outstanding amounts of indebtedness under our current credit facility are subject to variable interest rates.  Under our credit facility, the non-default rate of interest is equal to the LIBOR Market Index Rate plus 1.50% per annum (for a rate of interest of 1.71% at December 31, 2012).  Because there were no amounts outstanding under our credit facility, a one percent change in the interest rate on our variable-rate debt would not have materially impacted our financial position, results of operations or cash flows for the year ended December 31, 2012.
 
Other Long-Term Obligations
 
We had approximately $0.7 million in non-cancellable operating lease obligations at December 31, 2012.
 
Recent Accounting Pronouncements
 
Recently Adopted Standards
 
In June 2011, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update No. 2011-05, “Presentation of Comprehensive Income” (ASU 2011-05). This standard amends guidance on the presentation of other comprehensive income in financial statements to improve the comparability, consistency and transparency and to increase the prominence of items that are recorded in other comprehensive income. Under ASU 2011-05, an entity has the option to present the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. The provisions under ASU 2011-05 were effective for fiscal years beginning after December 15, 2011.  We elected to adopt the two separate but consecutive statements presentation.
 
In September 2011, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update (ASU) 2011-08, “Testing Goodwill for Impairment”, which simplified how an entity tests for goodwill impairment.   After assessment of certain qualitative factors, if it is determined to be more likely than not that the fair value of a reporting unit is less than its carrying amount, entities must perform the quantitative analysis of the goodwill impairment test.  Otherwise, the quantitative test(s) become optional.  The provisions under ASU 2011-08 are effective for annual and interim goodwill impairment testing for fiscal years beginning after December 15, 2011, with early adoption permitted.  We elected to early adopt this guidance on October 1, 2011, with no impact on our consolidated financial statements.
 
Recently Issued Standards
 
There are no recently issued accounting standards for which the Company expects a material impact on our consolidated financial statements.
 
ITEM 7A.               QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
 
In the normal course of our business, we are exposed to market risk from changes in interest rates and foreign currency exchange rates that could impact our results of operations and financial position.
 
 
20

 
 
Interest Rate Risk
 
Changes in interest rates affect the interest paid on indebtedness under our current credit facility because the outstanding amounts of indebtedness under our current credit facility are subject to variable interest rates.  Under our current credit facility, the non-default rate of interest is equal to the LIBOR Market Index Rate plus 1.50% per annum (for a rate of interest of 1.71% at December 31, 2012).  Because there were no amounts outstanding under our current credit facility, a one percent change in the interest rate on our variable-rate debt would not have materially impacted our financial position, results of operations or cash flows for the year ended December 31, 2012.
 
Foreign Currency Risk
 
We are subject to risk arising from changes in foreign currency exchange rates related to our international operations in Europe.  We manage our exposure to our foreign currency exchange rate risk through our regular operating and financing activities.  Additionally, from time to time, we enter into certain forward foreign currency exchange contracts.  Because we report in U.S. dollars on a consolidated basis, foreign currency exchange fluctuations could have a translation impact on our financial position.  At December 31, 2012, we recognized a $0.2 million decrease in our foreign currency translation adjustment account compared with December 31, 2011.  During the years ended December 31, 2012, 2011 and 2010, the impact of foreign currency exchange rate changes on our results of operations and cash flows was a $0.8 million gain, $0.2 million gain and $0.1 million loss, respectively.
 
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
 
The response to this item is included in Part IV, Item 15 of this Report.
 
CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
 
None.
 
ITEM 9A.               CONTROLS AND PROCEDURES
 
Disclosure Controls and Procedures
 
We carried out an evaluation, under the supervision and with the participation of our management, including our chief executive and chief financial officers, of the effectiveness of the design and operation of our disclosure controls and procedures, as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as of the end of the period covered by this report.  Based upon this evaluation, our Chief Executive Officer and our Chief Financial Officer have concluded that the disclosure controls and procedures were effective as of the end of the period covered by this Annual Report to ensure that information required to be disclosed in our reports that we file or submit under the Exchange Act are recorded, processed, summarized and reported within the time periods specified in Securities and Exchange Commission rules and forms.
 
Management’s Report On Internal Control Over Financial Reporting
 
Management of Miller Industries, Inc. is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act).  Our internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted in the United States of America.  The Company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with U.S. generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company’s assets that could have a material effect on the financial statements.
 
 
21

 
 
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements.  Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may be inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
 
Management, including our principal executive officers and principal financial officer, conducted an evaluation of the effectiveness of our internal control over financial reporting as of December 31, 2012.  In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in “Internal Control—Integrated Framework.”  Based on our assessment under those criteria, we concluded that, as of December 31, 2012, we maintained effective internal control over financial reporting.
 
Joseph Decosimo and Company, PLLC, the independent registered public accounting firm who audited the Company’s consolidated financial statements included in this report, has issued an audit report on the effectiveness of the Company’s internal control over financial reporting as of December 31, 2012, which appears herein.
 
March 6, 2013
 
 
22

 
 
Report of Independent Registered Public Accounting Firm
 
Board of Directors and Shareholders
Miller Industries, Inc.
Ooltewah, Tennessee
 
We have audited Miller Industries, Inc.’s internal control over financial reporting as of December 31, 2012, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria).  Miller Industries, Inc.’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting.  Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.
 
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States).  Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects.  Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances.  We believe that our audit provides a reasonable basis for our opinion.
 
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.  A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
 
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
 
In our opinion, Miller Industries, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2012, based on the COSO criteria.
 
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Miller Industries, Inc. and subsidiaries as of December 31, 2012 and 2011, and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the three years in the period ended December 31, 2012, and our report dated March 6, 2013, expressed an unqualified opinion on those consolidated financial statements.
 
/s/ Joseph Decosimo and Company, PLLC
Chattanooga, Tennessee
March 6, 2013
 
 
23

 
 
Changes in Internal Control Over Financial Reporting
 
There were no changes in our internal control over financial reporting that occurred during our most recent fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
 
ITEM 9B.               OTHER INFORMATION
 
None.
 
 
24

 
 
PART III
 
DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
 
The Proxy Statement for our Annual Meeting of Shareholders, to be filed with the Securities and Exchange Commission, will contain information relating to our directors and audit committee, compliance with Section 16(a) of the Exchange Act, and our code of ethics applicable to our chief executive, financial and accounting officers, which information is incorporated by reference herein.  Information relating to our executive officers is included in Item 1 of this report.
 
EXECUTIVE COMPENSATION
 
The Proxy Statement for our Annual Meeting of Shareholders, to be filed with the Securities and Exchange Commission, will contain information relating to director and executive officer compensation, which information is incorporated by reference herein.
 
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
 
The Proxy Statement for our Annual Meeting of Shareholders, to be filed with the Securities and Exchange Commission, will contain information relating to security ownership of certain beneficial owners and management, which information is incorporated by reference herein.
 
The Proxy Statement will also contain information relating to our equity compensation plans, which information is incorporated by reference herein.
 
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
 
The Proxy Statement for our Annual Meeting of Shareholders, to be filed with the Securities and Exchange Commission, will contain information relating to certain relationships and related transactions between us and certain of our directors and executive officers, which information is incorporated by reference herein.
 
PRINCIPAL ACCOUNTANT FEES AND SERVICES
 
The Proxy Statement for our Annual Meeting of Shareholders, to be filed with the Securities and Exchange Commission, will contain information relating to the fees charged and services provided by Joseph Decosimo and Company, PLLC, our principal accountants during the last three fiscal years, and our pre-approval policy and procedures for audit and non-audit services, which information is incorporated by reference into this report.
 
 
25

 
 
PART IV
 
EXHIBITS, FINANCIAL STATEMENT SCHEDULES
 
(a)      The following documents are filed as part of this Report:
 
 
1.      Financial Statements
 
Description
 
Page Number
in Report
     
Report of Independent Registered Public Accounting Firm
 
F-2
     
Consolidated Balance Sheets as of December 31, 2012 and 2011
 
F-3
     
Consolidated Statements of Income for the years ended December 31, 2012, 2011 and 2010
 
F-4
     
Consolidated Statements of Comprehensive Income for the years ended December 31, 2012, 2011 and 2010
 
F-5
     
Consolidated Statements of Shareholders’ Equity for the years ended December 31, 2012, 2011 and 2010
 
F-6
     
Consolidated Statements of Cash Flows for the years ended December 31, 2012, 2011 and 2010
 
F-7
     
Notes to Consolidated Financial Statements
 
F-8
 
2.      Financial Statement Schedules
 
The following Financial Statement Schedule for the Registrant is filed as part of this Report and should be read in conjunction with the Consolidated Financial Statements:
 
Description
 
Page Number
in Report
     
Schedule II - Valuation and Qualifying Accounts
 
S-1
 
All schedules, except those set forth above, have been omitted since the information required is included in the financial statements or notes or have been omitted as not applicable or not required.
 
3.             Exhibits
 
The following exhibits are required to be filed with this Report by Item 601 of Regulation S-K:
 
   
Description
 
Incorporated
by Reference
to Registration
File Number
 
Form or
Report
 
Date of Report
 
Exhibit
Number in
Report
                     
3.1
 
Charter, as amended, of the Registrant
 
--
 
Form 10-K
 
December 31, 2001
 
3.1
                     
3.2
 
Amended and Restated Bylaws of the Registrant
 
--
 
Form 10-Q
 
November 8, 2007
 
3.2
                     
10.1
 
Form of Noncompetition Agreement between the Registrant and certain officers of the Registrant
 
33-79430
 
S-1
 
August 1994
 
10.28
                     
10.2
 
Form of Nonexclusive Distributor Agreement
 
33-79430
 
S-1
 
August 1994
 
10.31
 
 
26

 
 
   
Description
 
Incorporated
by Reference
to Registration
File Number
 
Form or
Report
 
Date of Report
 
Exhibit
Number in
Report
                     
10.3
 
Miller Industries, Inc. Stock Option and Incentive Plan**
 
33-79430
 
S-1
 
August 1994
 
10.1
                     
10.4
 
Form of Incentive Stock Option Agreement under Miller Industries, Inc. Stock Option and Incentive Plan**
 
33-79430
 
S-1
 
August 1994
 
10.2
                     
10.5
 
Miller Industries, Inc. Non-Employee Director Stock Option Plan**
 
33-79430
 
S-1
 
August 1994
 
10.4
                     
10.6
 
Form of Director Stock Option Agreement**
 
33-79430
 
S-1
 
August 1994
 
10.5
                     
10.7
 
First Amendment to Miller Industries, Inc. Non-Employee Director Stock Option Plan**
 
--
 
Form 10-K
 
April 30, 1995
 
10.38
                     
10.8
 
Second Amendment to Miller Industries, Inc. Non-Employee Director Stock Option Plan**
 
--
 
Form 10-K
 
April 30, 1996
 
10.39
                     
10.9
 
Second Amendment to Miller Industries, Inc. Stock Option and Incentive Plan**
 
--
 
Form 10-K
 
April 30, 1996
 
10.40
                     
10.10
 
Employment Agreement dated as of December 30, 2008 between the Registrant and William G. Miller**
 
--
 
Form 10-Q
 
May 6, 2009
 
10.1
                     
10.11
 
Form of Indemnification Agreement by and between the Registrant and each of William G. Miller, Jeffrey I. Badgley, A. Russell Chandler, Frank Madonia, J. Vincent Mish, Richard H. Roberts and Theodore H. Ashford **
 
--
 
Form 10-Q
 
September 14, 1998
 
10
                     
10.12
 
Employment Agreement, dated as of December 30, 2008, between the Registrant and Jeffrey I. Badgley**
 
--
 
Form 10-Q
 
May 6, 2009
 
10.2
                     
10.13
 
Employment Agreement, dated as of December 30, 2008 between the Registrant and Frank Madonia**
 
--
 
Form 10-Q
 
May 6, 2009
 
10.3
                     
10.14
 
Employment Agreement, dated as of December 30, 2008 between the Registrant and J. Vincent Mish**
 
--
 
Form 10-Q
 
May 6, 2009
 
10.4
                     
10.15
 
Agreement between the Registrant and Jeffrey I. Badgley, effective December 30, 2008**
 
--
 
Form 10-Q
 
May 6, 2009
 
10.5
                     
10.16
 
Agreement between the Registrant and Frank Madonia, effective December 30, 2008**
 
--
 
Form 10-Q
 
May 6, 2009
 
10.6
 
 
27

 
 
   
Description
 
Incorporated
by Reference
to Registration
File Number
 
Form or
Report
 
Date of Report
 
Exhibit
Number in
Report
                     
10.17
 
Agreement between the Registrant and J. Vincent Mish, effective December 30, 2008**
 
--
 
Form 10-Q
 
May 6, 2009
 
10.7
                     
10.18
 
Non-Employee Director Stock Plan**
 
--
 
Schedule 14A
 
January 23, 2004
 
Annex A
                     
10.19
 
Miller Industries, Inc. 2005 Equity Incentive Plan**
 
--
 
Schedule 14A
 
May 2, 2005
 
Annex B
                     
10.20
 
Loan Agreement, dated April 6, 2010, by and among the Registrant, certain of the Registrant’s wholly-owned subsidiaries, and First Tennessee National Association
 
--
 
Form 8-K
 
April 12, 2010
 
10.1
                     
10.21
 
Agreement, dated April 6, 2010, by and between the Registrant, certain of the Registrant’s wholly-owned subsidiaries, and First Tennessee National Association
 
--
 
Form 8-K
 
April 12, 2010
 
10.2
                     
10.22
 
Agreement, dated April 6, 2010, by and between the Registrant, certain of the Registrant’s wholly-owned subsidiaries, and First Tennessee National Association
 
--
 
Form 8-K
 
April 12, 2010
 
10.3
                     
21
 
Subsidiaries of the Registrant*
               
                     
23.1
 
Consent of Joseph Decosimo and Company, PLLC*
               
                     
24
 
Power of Attorney (see signature page)*
               
                     
31.1
 
Certification Pursuant to Rules 13a-14(a)/15d-14(a) by Chief Executive Officer*
               
                     
31.2
 
Certification Pursuant to Rule 13a-14(a)/15d-14(a) by Chief Financial Officer*
               
                     
32.1
 
Certification Pursuant to Section 1350 of Chapter 63 of Title 18 of United States Code by Chief Executive Officer*
               
                     
32.2
 
Certification Pursuant to Section 1350 of Chapter 63 of Title 18 of United States Code by Chief Financial Officer*
               
 
 
28

 
 
   
Description
 
Incorporated
by Reference
to Registration
File Number
 
Form or
Report
 
Date of Report
 
Exhibit
Number in
Report
                     
101
 
The following financial information from Miller Industries, Inc.’s Annual Report on Form 10-K for the year ended December 31, 2012, formatted in XBRL (eXtensible Business Reporting Language): (i)  Consolidated Balance Sheets as of December 31, 2012 and December 31, 2011, (ii)  Consolidated Statements of Income for the years ended December 31, 2012, 2011 and 2010, (iii) Consolidated Statements of Comprehensive Income for the years ended December 31, 2012, 2011 and 2010, (iv) Consolidated Statements of Shareholder’s Equity for the years ended December 31, 2012, 2011 and 2010, (v) Consolidated Statements of Cash Flows for the years ended December 31, 2012, 2011 and 2010, and (vi) the Notes to Consolidated Financial Statements.*
               
 

 
*        Filed herewith.
 
**      Management contract or compensatory plan or arrangement.
 
(b)     The Registrant hereby files as exhibits to this Report the exhibits set forth in Item 15(a)3 hereof.
 
I         The Registrant hereby files as financial statement schedules to this Report the financial statement schedules set forth in Item 15(a)2 hereof.
 
 
29

 
 
(MILLER INDUSTRIES INC LOGO)
INDEX TO FINANCIAL STATEMENTS
   
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
F-2
   
CONSOLIDATED BALANCE SHEETS AS OF DECEMBER 31, 2012 AND 2011
F-3
   
CONSOLIDATED STATEMENTS OF INCOME FOR THE YEARS ENDED DECEMBER 31, 2012, 2011 AND 2010
F-4
   
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME FOR THE YEARS ENDED DECEMBER 31, 2012, 2011 AND 2010
F-5
   
CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY FOR THE YEARS ENDED DECEMBER 31, 2012, 2011 AND 2010
F-6
   
CONSOLIDATED STATEMENTS OF CASH FLOWS FOR THE YEARS ENDED DECEMBER 31, 2012, 2011 AND 2010
F-7
   
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
F-8
   
SCHEDULE II – VALUATION AND QUALIFYING ACCOUNTS
S-1
 
 
F-1

 
 
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
Board of Directors and Shareholders
Miller Industries, Inc.
Ooltewah, Tennessee
 
We have audited the accompanying consolidated balance sheets of Miller Industries, Inc. and subsidiaries as of December 31, 2012 and 2011, and the related consolidated statements of income, comprehensive income, shareholders’ equity and cash flows for each of the three years in the period ended December 31, 2012.  Our audits also included the financial statement schedule listed in the Index at Item 15.  These consolidated financial statements and financial statement schedule are the responsibility of the Company’s management.  Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audits.
 
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States).  Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement.  An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements.  An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation.  We believe that our audits provide a reasonable basis for our opinion.
 
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Miller Industries, Inc. and subsidiaries as of December 31, 2012 and 2011, and the consolidated results of their operations and their cash flows for each of the three years in the period ended December 31, 2012, in conformity with accounting principles generally accepted in the United States of America.  Also, in our opinion, the financial statement schedule when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.
 
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of December 31, 2012, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) and our report dated March 6, 2013 expressed an unqualified opinion on the effectiveness on the Company’s internal control over financial reporting.
 
/s/ Joseph Decosimo and Company, PLLC
Chattanooga, Tennessee
March 6, 2013
 
 
F-2

 
 
MILLER INDUSTRIES, INC. AND SUBSIDIARIES
 
CONSOLIDATED BALANCE SHEETS
DECEMBER 31, 2012 AND 2011
 
(In thousands, except share data)
 
   
2012
   
2011
 
ASSETS
           
CURRENT ASSETS:
           
Cash and temporary investments
  $ 48,591     $ 50,153  
Accounts receivable, net of allowance for doubtful accounts of $1,614 and $1,691, at December 31, 2012 and 2011, respectively
    59,113       61,085  
Inventories
    45,045       48,240  
Prepaid expenses
    1,951       2,219  
Current deferred income taxes
    3,581       5,144  
Total current assets
    158,281       166,841  
PROPERTY, PLANT, AND EQUIPMENT, net
    32,188       33,120  
GOODWILL
    11,619       11,619  
OTHER ASSETS
    263       262  
    $ 202,351     $ 211,842  
                 
LIABILITIES AND SHAREHOLDERS’ EQUITY
               
CURRENT LIABILITIES:
               
Current portion of long-term obligations
  $ --     $ 5  
Accounts payable
    30,745       39,692  
Accrued liabilities
    12,358       17,384  
Total current liabilities
    43,103       57,081  
                 
DEFERRED INCOME TAX LIABILITIES
    1,758       2,110  
COMMITMENTS AND CONTINGENCIES (Notes 3 and 5)
               
                 
SHAREHOLDERS’ EQUITY:
               
Preferred stock, $.01 par value; 5,000,000 shares authorized, none issued or outstanding
    --       --  
Common stock, $.01 par value; 100,000,000 shares authorized, 11,158,631 and 11,000,119, outstanding at December 31, 2012 and 2011, respectively
    112       110  
Additional paid-in capital
    148,688       147,004  
Accumulated surplus
    8,760       5,400  
Accumulated other comprehensive income (loss)
    (70 )     137  
Total shareholders’ equity
    157,490       152,651  
    $ 202,351     $ 211,842  
 
The accompanying notes are an integral part of these consolidated statements.
 
 
F-3

 
 
MILLER INDUSTRIES, INC. AND SUBSIDIARIES
 
CONSOLIDATED STATEMENTS OF INCOME
FOR THE YEARS ENDED DECEMBER 31, 2012, 2011 AND 2010
 
(In thousands, except per share data)
 
   
2012
   
2011
   
2010
 
NET SALES
  $ 342,663     $ 412,659     $ 306,897  
                         
COSTS AND EXPENSES
                       
Costs of operations
    302,606       342,557       260,566  
Selling, general, and administrative expenses
    27,507       31,407       26,665  
Interest expense, net
    712       728       305  
Other Expense (Income)
    (815 )     (161 )     71  
                         
Total costs and expenses
    330,010       374,531       287,607  
                         
INCOME BEFORE INCOME TAXES
    12,653       38,128       19,290  
INCOME TAX PROVISION
    3,531       15,120       7,583  
                         
NET INCOME
  $ 9,122     $ 23,008     $ 11,707  
                         
BASIC INCOME PER COMMON SHARE
  $ 0.82     $ 1.98     $ 1.00  
                         
DILUTED INCOME PER COMMON SHARE
  $ 0.82     $ 1.92     $ 0.96  
                         
CASH DIVIDENDS DECLARED PER COMMON SHARE
  $ 0.52     $ 0.48     $ 0.10  
                         
WEIGHTED AVERAGE SHARES OUTSTANDING:
                       
Basic
    11,068       11,600       11,671  
Diluted
    11,258       11,984       12,163  
 
The accompanying notes are an integral part of these consolidated statements.
 
 
F-4

 
 
MILLER INDUSTRIES, INC. AND SUBSIDIARIES
 
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
FOR THE YEARS ENDED DECEMBER 31, 2012, 2011 AND 2010
 
(In thousands)
 
   
2012
   
2011
   
2010
 
Net income
  $ 9,122     $ 23,008     $ 11,707  
Other comprehensive income:
                       
Foreign currency translation adjustment
    (207 )     71       (2,351 )
Total other comprehensive income (loss)
    (207 )     71       (2,351 )
                         
Total comprehensive income
  $ 8,915     $ 23,079     $ 9,356  
 
The accompanying notes are an integral part of these consolidated statements.
 
 
F-5

 
 
MILLER INDUSTRIES, INC. AND SUBSIDIARIES
 
CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY
FOR THE YEARS ENDED DECEMBER 31, 2012, 2011 AND 2010
 
(In thousands, except share data)
 
   
Common Stock
   
Additional Paid-In Capital
   
Accumulated
Surplus (Deficit)
   
Accumulated Other Comprehensive Income (Loss)
   
Total
 
BALANCE, December 31, 2009
  $ 116     $ 161,512     $ (22,606 )   $ 2,417     $ 141,439  
Components of comprehensive income:
                                       
Net income
    --       --       11,707       --       11,707  
Foreign currency translation adjustments
    --       --       --       (2,351 )     (2,351 )
Total comprehensive income
    --       --       11,707       (2,351 )     9,356  
Issuance of common stock to non-employee directors (7,835)
    --       93       --       --       93  
Exercise of stock options (74,125)
    1       443       --       --       444  
Stock-based compensation expense
    --       399       --       --       399  
Dividends paid, $0.10 per share
    --       --       (1,163 )     --       (1,163 )
BALANCE, December 31, 2010
    117       162,447       (12,062 )     66       150,568  
Components of comprehensive income:
                                       
Net income
    --       --       23,008       --       23,008  
Foreign currency translation adjustments
    --       --       --       71       71  
Total comprehensive income
    --       --       23,008       71       23,079  
Issuance of common stock to non-employee directors (6,840)
    --       100       --       --       100  
Exercise of stock options (468,204)
    5       2,762       --       --       2,767  
Repurchase of common stock (1,184,200)
    (12 )     (19,988 )     --       --       (20,000 )
Stock-based compensation expense
    --       399       --       --       399  
Excess tax effect for stock-based compensation
    --       1,284       --       --       1,284  
Dividends paid, $0.48 per share
    --       --       (5,546 )     --       (5,546 )
BALANCE, December 31, 2011
    110       147,004       5,400       137       152,651  
Components of comprehensive income:
                                       
Net income
    --       --       9,122       --       9,122  
Foreign currency translation adjustments
    --       --       --       (207 )     (207 )
Total comprehensive income
    --       --       9,122       (207 )     8,915  
Issuance of common stock to non-employee directors (4,737)
    --       75       --       --       75  
Exercise of stock options (153,775)
    2       851       --       --       853  
Stock-based compensation expense
    --       332       --       --       332  
Excess tax effect for stock-based compensation
    --       426       --       --       426  
Dividends paid, $0.52 per share
    --       --       (5,762 )     --       (5,762 )
BALANCE, December 31, 2012
  $ 112     $ 148,688     $ 8,760     $ (70 )   $ 157,490  
 
The accompanying notes are an integral part of these consolidated statements.
 
 
F-6

 
 
MILLER INDUSTRIES, INC. AND SUBSIDIARIES
 
CONSOLIDATED STATEMENTS OF CASH FLOWS
FOR THE YEARS ENDED DECEMBER 31, 2012, 2011 AND 2010
 
(In thousands)
 
   
2012
   
2011
   
2010
 
OPERATING ACTIVITIES:
                 
Net income
  $ 9,122     $ 23,008     $ 11,707  
Adjustments to reconcile net income to net cash flows from operating activities:
                       
Depreciation and amortization
    3,807       3,675       3,533  
Deferred tax provision
    1,210       206       6,008  
Provision for doubtful accounts
    257       240       220  
Stock-based compensation
    332       399       399  
Excess tax benefit from stock-based compensation
    (426 )     (1,284 )     --  
Issuance of non-employee director shares
    75       100       93  
(Gain) Loss on disposals of equipment
    (1 )     --       (28 )
Changes in operating assets and liabilities:
                       
Accounts receivable
    1,884       (1,365 )     (16,378 )
Inventories
    3,033       (9,360 )     (4,081 )
Prepaid expenses
    270       1,338       (1,283 )
Other long-term assets
    --       --       (257 )
Accounts payable
    (8,893 )     5,886       15,362  
Accrued liabilities
    (4,561 )     5,495       2,230  
Net cash flows from operating activities
    6,109       28,338       17,525  
INVESTING ACTIVITIES:
                       
Purchases of property, plant, and equipment
    (2,889 )     (3,961 )     (5,279 )
Proceeds from sale of equipment
    20       1,017       24  
Payments received on notes receivables
    33       177       390  
Net cash flows from investing activities
    (2,836 )     (2,767 )     (4,865 )
FINANCING ACTIVITIES:
                       
Payments on long-term obligations
    (5 )     (47 )     (178 )
Payments of cash dividends
    (5,762 )     (5,546 )     (1,163 )
Additions to deferred financing costs
    (10 )     --       (51 )
Proceeds from exercise of stock options
    851       2,766       443  
Excess tax benefit from stock-based compensation
    426       1,284       --  
Payments for common stock repurchased
    --       (20,000 )     --  
Net cash flows from financing activities
    (4,500 )     (21,543 )     (949 )
EFFECT OF EXCHANGE RATE CHANGES ON CASH AND TEMPORARY INVESTMENTS
    (335 )     (209 )     (1,537 )
NET CHANGE IN CASH AND TEMPORARY INVESTMENTS
    (1,562 )     3,819       10,174  
CASH AND TEMPORARY INVESTMENTS, beginning of year
    50,153       46,334       36,160  
CASH AND TEMPORARY INVESTMENTS, end of year
  $ 48,591     $ 50,153     $ 46,334  
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION:
                       
Cash payments for interest
  $ 1,070     $ 968     $ 692  
Cash payments for income taxes, net of refunds
  $ 3,858     $ 12,578     $ 1,150  
 
The accompanying notes are an integral part of these consolidated statements.
 
 
F-7

 
 
MILLER INDUSTRIES, INC. AND SUBSIDIARIES
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
(in thousands, except share data and except as otherwise noted)
 
1.
ORGANIZATION AND NATURE OF OPERATIONS
 
Miller Industries, Inc. and subsidiaries (the “Company”) is the world’s largest manufacturer of vehicle towing and recovery equipment.  The principal markets for the Company’s towing and recovery equipment are approximately 80 independent distributors and the users of towing and recovery equipment located primarily throughout North America, and other customers throughout the world.  The Company’s products are marketed under the brand names of Century®, Challenger®, Holmes®, Champion®, Eagle®, Titan®, JigeTM, BonifaceTM, Vulcan®, and ChevronTM.
 
2.
SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
 
Use of Estimates in the Preparation of Financial Statements
 
The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.
 
Consolidation
 
The accompanying consolidated financial statements include the accounts of Miller Industries, Inc. and its subsidiaries.  All significant intercompany transactions and balances have been eliminated.
 
Cash and Temporary Investments
 
Cash and temporary investments include all cash and cash equivalent investments with original maturities of three months or less.
 
Accounts Receivable
 
Receivables consist of amounts billed and currently due from customers.  The Company extends credit to customers in the normal course of business.  Collections from customers are continuously monitored and an allowance for doubtful accounts is maintained based on historical experience and any specific customer collection issues.
 
Fair Value of Financial Instruments
 
For assets and liabilities measured at fair value on a recurring and nonrecurring basis, a three-level hierarchy of measurements based upon observable and unobservable inputs is used to arrive at fair value. Observable inputs are developed based on market data obtained from independent sources, while unobservable inputs reflect our assumptions about valuation based on the best information available in the circumstances. Depending on the inputs, we classify each fair value measurement as follows:
 
Level 1—based upon quoted prices for identical instruments in active markets,
 
Level 2—based upon quoted prices for similar instruments, prices for identical or similar instruments in markets that are not active, or model-derived valuations, all of whose significant inputs are observable, and
 
Level 3—based upon one or more significant unobservable inputs
 
The carrying values of cash and temporary investments, accounts receivable, accounts payable and accrued liabilities are reasonable estimates of their fair values because of the short maturity of these financial instruments.  The carrying values of long-term obligations are reasonable estimates of their fair values based on the rates available for obligations with similar terms and maturities.
 
The fair value of derivative assets and liabilities are measured assuming that the unit of account is an individual derivative transaction and that each derivative could be sold or transferred on a stand-alone basis. We classify within Level 2 our forward foreign currency exchange contracts based upon quoted prices for similar instruments that are actively traded.  For more information regarding derivatives, see Note 11, Derivative Financial Instruments.
 
Inventories
 
Inventory costs include materials, labor and factory overhead. Inventories are stated at the lower of cost or market (net realizable value), determined on a first-in, first-out basis.  Appropriate consideration is given to obsolescence, valuation and other factors in determining net realizable value.  Revisions of these estimates could result in the need for adjustments.  Inventories, net of reserves, at December 31, 2012 and 2011 consisted of the following:
 
   
2012
   
2011
 
Chassis
  $ 9,952     $ 12,807  
Raw materials
    18,856       18,725  
Work in process
    7,961       8,426  
Finished goods
    8,276       8,282  
    $ 45,045     $ 48,240  
 
 
F-8

 
 
Property, Plant, and Equipment
 
Property, plant and equipment are recorded at cost. Depreciation for financial reporting purposes is provided using the straight-line method over the estimated useful lives of the assets. Accelerated depreciation methods are used for income tax reporting purposes. Estimated useful lives range from 20 to 30 years for buildings and improvements and 5 to 10 years for machinery and equipment, furniture and fixtures, and software costs. Expenditures for routine maintenance and repairs are charged to expense as incurred. Internal labor is used in certain capital projects.
 
Property, plant and equipment at December 31, 2012 and 2011 consisted of the following:
 
   
2012
   
2011
 
Land and improvements
  $ 4,887     $ 4,887  
Buildings and improvements
    33,498       32,253  
Machinery and equipment
    26,959       26,212  
Furniture and fixtures
    8,242       7,971  
Software costs
    7,381       7,294  
      80,967       78,617  
Less accumulated depreciation
    (48,779 )     (45,497 )
    $ 32,188     $ 33,120  
 
The Company recognized $3,796, $3,648 and $3,502 in depreciation expense in 2012, 2011 and 2010, respectively.
 
The Company capitalizes costs related to software development in accordance with established criteria, and amortizes those costs to expense on a straight-line basis over five years.  System development costs not meeting proper criteria for capitalization are expensed as incurred.
 
Basic and Diluted Income Per Common Share
 
Basic income per common share is computed by dividing net income by the weighted average number of common shares outstanding.  Diluted income per common share is calculated by dividing net income by the weighted average number of common and potential dilutive common shares outstanding.  Diluted income per common share takes into consideration the assumed exercise of outstanding stock options resulting in approximately 190,000, 384,000 and 492,000 potential dilutive common shares in 2012, 2011 and 2010, respectively.  For 2012, 2011 and 2010, none of the outstanding stock options would have been anti-dilutive.
 
Long-Lived Assets
 
The Company periodically reviews the carrying amount of its long-lived assets to determine if those assets may be recoverable based upon the future operating cash flows expected to be generated by those assets.  Management believes that its long-lived assets are appropriately valued.
 
Goodwill
 
Goodwill consists of the excess of cost of acquired entities over the sum of the amounts assigned to identifiable assets acquired less liabilities assumed.  Goodwill is not amortized.  However, the Company evaluates the carrying value of goodwill for impairment at least annually or if an event or circumstance occurs that would indicate that the carrying amount had been impaired.  The Company reviews goodwill for impairment utilizing a qualitative assessment or a two-step process.  If the qualitative analysis of goodwill is utilized and it is determined that fair value more likely than not exceeds the carrying value, no further testing is needed.  If the two-step approach is chosen, first, the carrying value of the entity is compared to the fair value.  If the fair value is less, a comparison of the carrying value of goodwill to the fair value of goodwill is performed to determine if a writedown is required.
 
 
F-9

 
 
Patents, Trademarks and Other Purchased Product Rights
 
The cost of acquired patents, trademarks and other purchased product rights is capitalized and amortized using the straight-line method over various periods not exceeding 20 years. Total accumulated amortization of these assets was $1,547 at December 31, 2012 and 2011.  At December 31, 2012 and 2011, all intangible assets subject to amortization were fully amortized.  As acquisitions and dispositions of intangible assets occur in the future, the amortization amounts may vary.
 
Deferred Financing Costs
 
All deferred financing costs are included in other assets and are amortized using the straight-line method over the terms of the respective obligations.  Total accumulated amortization of deferred financing costs at December 31, 2012 and 2011 was $55 and $45, respectively.  Amortization expense in 2012, 2011 and 2010, was $10, $27 and $32, respectively, and is included in interest expense in the accompanying consolidated statements of income.  Based on the current amount of deferred financing costs subject to amortization, the estimated amortization expense in future years is not significant.
 
Accrued Liabilities
 
Accrued liabilities consisted of the following at December 31, 2012 and 2011:
 
   
2012
   
2011
 
Accrued wages, commissions, bonuses and benefits
  $ 4,819     $ 6,009  
Accrued products warranty
    4,357       5,322  
Accrued income taxes
    57       1,628  
Other
    3,125       4,425  
    $ 12,358     $ 17,384  
 
Income Taxes
 
The Company recognizes as deferred income tax assets and liabilities the future tax consequences of the differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases.  The Company considers the need to record a valuation allowance to reduce deferred tax assets to the amount that is more likely than not to be realized.  Tax loss carryforwards, reversal of deferred tax liabilities, tax planning and estimates of future taxable income are considered in assessing the need for a valuation allowance. 
 
The Company accounts for uncertain tax positions in accordance with FASB ASC Topic 740, Income Taxes. ASC Topic 740 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. ASC Topic 740 also provides guidance on derecognition, classification, interest and penalties, disclosure and transition. The evaluation of a tax position in accordance with ASC Topic 740 is a two-step process. The first step is recognition, where the Company evaluates whether an individual tax position has a likelihood of greater than 50% of being sustained upon examination based on the technical merits of the position, including resolution of any related appeals or litigation processes. For tax positions that are currently estimated to have a less than 50% likelihood of being sustained, zero tax benefit is recorded. For tax positions that have met the recognition threshold in the first step, the Company performs the second step of measuring the benefit to be recorded. The actual benefits ultimately realized may differ from the Company’s estimates. In future periods, changes in facts and circumstances and new information may require the Company to change the recognition and measurement estimates with regard to individual tax positions. Changes in recognition and measurement estimates are recorded in results of operations and financial position in the period in which such changes occur. As of December 31 2012, the Company had no unrecognized tax benefits pertaining to uncertain tax positions.
 
Stock-Based Compensation
 
Stock compensation expense was $332 for 2012 and $399 for each of 2011 and 2010.  The stock-based compensation expense is included in selling, general and administrative expenses in the accompanying consolidated statements of income.
 
No options were granted during 2012 or 2011.  The fair value of options granted in 2008 has been estimated as of the date of the grant using the Black-Scholes option-pricing model with the following weighted average assumptions: expected dividend yield of 0%; expected volatility of 44%; risk-free interest rate of 1.71%; and expected life of four years.  Using these assumptions, the fair value of options granted in 2008 was $1,596, which is being amortized as compensation expense over the vesting period.
 
At December 31, 2012, the Company had no unrecognized compensation expense related to stock options.  The Company issued approximately 154,000 and 468,000 shares of common stock during 2012 and 2011, respectively, from the exercise of stock options.
 
 
F-10

 
 
Product Warranty
 
The Company generally provides a one-year limited product and service warranty on certain of its products.  The Company provides for the estimated cost of this warranty at the time of sale.  These estimates are established using historical information about the nature, frequency, and average cost of warranty claims.  Warranty expense in 2012, 2011 and 2010, was $901, $3,908 and $2,411, respectively.
 
The table below provides a summary of the warranty liability for December 31, 2012 and 2011:
 
   
2012
   
2011
 
Accrual at beginning of the year
  $ 5,322     $ 2,738  
Provision
    901       3,908  
Settlement and Other
    (1,866 )     (1,324 )
Accrual at end of year
  $ 4,357     $ 5,322  
 
Credit Risk
 
Financial instruments that potentially subject the Company to significant concentrations of credit risk consist principally of cash investments and trade accounts receivable.  The Company places its cash investments with high-quality financial institutions.  In addition, the Company limits the amount of credit exposure through the use of accounts and funds backed by the U.S. Government and its agencies. Trade accounts receivable are generally diversified due to the number of entities comprising the Company’s customer base and their dispersion across many geographic regions and by frequent monitoring of the creditworthiness of the customers to whom the credit is granted in the normal course of business.
 
Revenue Recognition
 
Revenue is recorded by the Company when the risk of ownership for products has transferred to the independent distributors or other customers, which is generally upon shipment.  From time to time, revenue is recognized under a bill and hold arrangement.  Recognition of revenue on bill and hold arrangements occurs when risk of ownership has passed to the customer, a fixed written commitment has been provided by the customer, the goods are complete and ready for shipment, the goods are segregated from inventory, no performance obligation remains, and a schedule for delivery has been established.
 
Shipping and Handling Fees and Cost
 
The Company records revenues earned for shipping and handling as revenue, while the cost of shipping and handling is classified as cost of operations.
 
Research and Development
 
Research and development costs are expensed as incurred and included in cost of operations and to a lesser extent in selling, general and administrative expenses.  Research and development costs amounted to $1,436, $1,922 and $1,286 for 2012, 2011 and 2010, respectively.
 
Foreign Currency Translation
 
The functional currency for the Company’s foreign operations is the applicable local currency.  The translation from the applicable foreign currencies to U.S. dollars is performed for balance sheet accounts using current exchange rates in effect at the balance sheet date, historical rates for equity and the weighted average exchange rate during the period for revenue and expense accounts.  Foreign currency translation adjustments resulting from such translations are included in shareholders’ equity.  Intercompany transactions denominated in a currency other than the functional currency are remeasured into the functional currency.  Gains and losses resulting from foreign currency transactions are included in other income (expense) in our consolidated statements of income.
 
 
F-11

 
 
Derivative Financial Instruments
 
The Company periodically enters into certain forward foreign currency exchange contracts that are designed to mitigate foreign currency risk.
 
Prior to November 2012, the Company had not instituted a formal foreign exchange policy.  Any foreign currency exchange contracts entered into did not qualify for hedge accounting.  Changes in fair value of these instruments were recognized each period in other income (expense) in our consolidated statements of income.
 
In November 2012, the Company adopted a formal foreign exchange policy.  Under this policy, at inception of each hedge relationship, the Company documents its risk management objectives, procedures and accounting treatment. For those foreign currency exchange contracts that qualify for hedge accounting treatment, changes in the fair value of such instruments are included in accumulated other comprehensive income (loss).  The Company also assesses, both at inception and on an ongoing basis, whether the derivatives that are used in the hedging transaction are highly effective in offsetting changes in cash flows of the hedged items. For those foreign currency exchange contracts that do not qualify for hedge accounting treatment, changes in the fair value of such instruments are recognized each period in other income (expense) in our consolidated statements of income.
 
Recent Accounting Pronouncements
 
Recently Adopted Standards
 
In June 2011, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update No. 2011-05, “Presentation of Comprehensive Income” (ASU 2011-05). This standard amends guidance on the presentation of other comprehensive income in financial statements to improve the comparability, consistency and transparency and to increase the prominence of items that are recorded in other comprehensive income. Under ASU 2011-05, an entity has the option to present the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. The provisions under ASU 2011-05 were effective for fiscal years beginning after December 15, 2011.  We elected to adopt the two separate but consecutive statements presentation.
 
In September 2011, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update (ASU) 2011-08, “Testing Goodwill for Impairment”, which simplified how an entity tests for goodwill impairment.   After assessment of certain qualitative factors, if it is determined to be more likely than not that the fair value of a reporting unit is less than its carrying amount, entities must perform the quantitative analysis of the goodwill impairment test.  Otherwise, the quantitative test(s) become optional.  The provisions under ASU 2011-08 are effective for annual and interim goodwill impairment testing for fiscal years beginning after December 15, 2011, with early adoption permitted.  We elected to early adopt this guidance on October 1, 2011, with no impact on our consolidated financial statements.
 
Recently Issued Standards
 
There are no recently issued accounting standards for which the Company expects a material impact on our consolidated financial statements.
 
Reclassifications
 
Certain prior year amounts have been reclassified to conform to current year presentation, with no impact on previously reported shareholders’ equity or net income.
 
 
F-12

 
 
3.
LONG-TERM OBLIGATIONS
 
Long-Term Obligations
 
Long-term obligations consisted of the following at December 31, 2012 and 2011:
 
   
2012
   
2011
 
Equipment notes, weighted average interest rate of 4.4%, payable in monthly installments
  $ --     $ 5  
Less current portion
    --       (5 )
    $ --     $ --  
 
Credit Facility.  On April 6, 2010 we entered into a Loan Agreement with First Tennessee Bank National Association for a $20.0 million unsecured revolving credit facility, and on December 21, 2011 the credit facility was renewed and our unsecured revolving credit facility was increased to $25.0 million (the “Credit Facility”).  On December 10, 2012 the Credit Facility was further renewed to extend the maturity date to March 31, 2015.  The Credit Facility contains customary representations and warranties, events of default, and financial, affirmative and negative covenants for loan agreements of this kind.  Covenants under the Credit Facility restrict the payment of cash dividends if the Company would be in violation of the minimum tangible net worth test or the leverage ratio test in the current loan agreement as a result of the dividend, among various restrictions.
 
In the absence of a default, all borrowings under the Credit Facility bear interest at the LIBOR Rate plus 1.50% per annum.  The Company will pay a non-usage fee under the current loan agreement at a rate per annum equal to between 0.15% and 0.35% of the unused amount of the Credit Facility, which fee shall be paid quarterly.
 
At December 31, 2012 and 2011, the Company had no outstanding borrowings under the Credit Facility.
 
Interest Rate Sensitivity.  Changes in interest rates affect the interest paid on indebtedness under our Credit Facility because the outstanding amounts of indebtedness under our Credit Facility are subject to variable interest rates.  Under our Credit Facility, the non-default rate of interest is equal to the LIBOR Market Index Rate plus 1.50% per annum (for a rate of interest of 1.71% at December 31, 2012).  A one percent change in the interest rate on our variable-rate debt would not have materially impacted our financial position, results of operations or cash flows for the year ended December 31, 2012.
 
4.
STOCK-BASED COMPENSATION PLANS
 
In accordance with the Company’s stock-based compensation plans, the Company may grant incentive stock options as well as non-qualified and other stock-related incentives to officers, employees and non-employee directors of the Company. Options vest ratably over a two to four-year period beginning on the grant date and expire ten years from the date of grant.  Shares available for granting options at December 31, 2012, 2011 and 2010 were 600,000.
 
A summary of the activity of stock options for the years ended December 31, 2012, 2011 and 2010, is presented below (shares in thousands):
 
   
2012
   
2011
   
2010
 
   
Shares Under Option
   
Weighted Average Exercise Price
   
Shares Under Option
   
 
Weighted Average Exercise Price
   
Shares Under Option
   
Weighted Average Exercise Price
 
Outstanding at Beginning of Period
    360     $ 5.71       831     $ 5.82       905     $ 5.83  
Granted
    --       --       --       --       --       --  
Exercised
    (154     5.54       (468 )     5.91       (74 )     5.99  
Forfeited and cancelled
    --       --       (3 )     5.49       --       --  
Outstanding at End of Period
    206     $ 5.83       360     $ 5.71       831     $ 5.82  
Options exercisable at year end
    206     $ 5.83       161     $ 5.98       430     $ 6.13  
 
 
F-13

 
 
A summary of options outstanding under the Company’s stock-based compensation plans at December 31, 2012 is presented below:
 
Exercise Price
   
Shares
Under
Option
   
Weighted Average Exercise Price of
Options Outstanding
   
Weighted
Average
Remaining Life
   
Options
Exercisable
   
Weighted Average Exercise Price of
Shares Exercisable
 
                                               
  $ 5.49       180,886     $ 5.49       5.8       180,886     $ 5.49  
    8.31       25,125       8.31       1.2       25,125       8.31  
Total
      206,011     $ 5.83       5.3       206,011     $ 5.83  
 
5.
COMMITMENTS AND CONTINGENCIES
 
Commitments
 
The Company has entered into various operating leases for buildings and for office and computer equipment. Rental expense under these leases was $1,127, $1,570 and $1,346 in 2012, 2011 and 2010, respectively.
 
At December 31, 2012 future minimum lease payments under non-cancelable operating leases for the next five years and in the aggregate are as follows:
 
2013
  $ 324  
2014
    213  
2015
    121  
2016
    14  
2017
    --  
Thereafter
    --  
    $ 672  
 
The Company has also entered into arrangements with third-party lenders where it has agreed, in the event of a default by the independent distributor customer, to repurchase from the third-party lender Company products repossessed from the independent distributor customer.  These arrangements are typically subject to a maximum repurchase amount.  The Company’s risk under these arrangements is mitigated by the value of the products repurchased as part of the transaction.  The maximum amount of collateral the Company could be required to purchase was approximately $22,035 and $18,063 at December 31, 2012 and 2011, respectively.  No repurchases of products were required during 2012 or 2011.
 
Contingencies
 
The Company is, from time to time, a party to litigation arising in the normal course of its business.  Litigation is subject to various inherent uncertainties, and it is possible that some of these matters could be resolved unfavorably to the Company, which could result in substantial damages against the Company.  The Company has established accruals for matters that are probable and reasonably estimable and maintains product liability and other insurance that management believes to be adequate.  Management believes that any liability that may ultimately result from the resolution of these matters in excess of available insurance coverage and accruals will not have a material adverse effect on the consolidated financial position or results of operations of the Company.
 
6.
INCOME TAXES
 
Deferred tax assets and liabilities are determined based on the differences between the financial and tax basis of existing assets and liabilities using the currently enacted tax rates in effect for the year in which the differences are expected to reverse.
 
 
F-14

 
 
The provision for income taxes on income consisted of the following in 2012, 2011 and 2010:
 
   
2012
   
2011
   
2010
 
Current:
                 
Federal
  $ 202     $ 11,902     $ 300  
State
    321       1,428       634  
Foreign
    1,798       1,584       641  
      2,321       14,914       1,575  
Deferred:
                       
Federal
    1,095       245       5,874  
State
    122       27       68  
Foreign
    (7 )     (66 )     66  
      1,210       206       6,008  
    $ 3,531     $ 15,120     $ 7,583  
 
The principal differences between the federal statutory tax rate and the income tax expense in 2012, 2011 and 2010:
 
   
2012
   
2011
   
2010
 
Federal statutory tax rate
    35.0 %     35.0 %     34.4 %
State taxes, net of federal tax benefit
    4.0 %     4.0 %     2.8 %
Excess of foreign tax over US tax on foreign income
    0.6 %     0.6 %     0.8 %
Domestic Tax Credits
    (10.8 )%     --       --  
Other
    (0.9 )%     0.1 %     1.3 %
Effective tax rate
    27.9 %     39.7 %     39.3 %
 
Income taxes for 2012 include $1,361 of income tax benefits resulting primarily from Federal Domestic Activity Deductions, as well as Federal Research and Development and other tax credits recognized during the period.
 
Deferred income tax assets and liabilities reflect the impact of temporary differences between the amounts of assets and liabilities for financial reporting and income tax reporting purposes. Temporary differences and carry forwards which give rise to deferred tax assets and liabilities at December 31, 2012 and 2011 are as follows:
 
   
2012
   
2011
 
Deferred tax assets:
           
Allowance for doubtful accounts
  $ 95     $ 53  
Accruals and reserves
    3,390       4,024  
Other
    96       1,067  
Total deferred tax assets
    3,581       5,144  
Deferred tax liabilities:
               
Property, plant, and equipment
    1,758       2,110  
Total deferred tax liabilities
    1,758       2,110  
Net deferred tax asset
  $ 1,823     $ 3,034  
 
As of December 31, 2012, the Company has no federal or state net operating loss carryforwards.
 
At December 31, 2012 and 2011, the Company had no unrecognized tax positions.  The Company does not expect its unrecognized tax positions to change significantly in the next twelve months.  If unrecognized tax positions existed, the interest and penalties related to the unrecognized tax positions would be recorded as income tax expense in the consolidated statements of income.
 
 
F-15

 
 
The Company is subject to United States federal income taxes, as well as income taxes in various states and foreign jurisdictions.  The Company’s tax years 2009 through 2011 remain open to examination for U.S. Federal income taxes.  With few exceptions, the Company is no longer subject to state or non-U.S. income tax examinations prior to 2009.
 
7.
SHAREHOLDERS EQUITY
 
Preferred Stock
 
The Company has authorized 5,000,000 shares of undesignated preferred stock which can be issued in one or more series. The terms, price and conditions of the preferred shares will be set by the board of directors. No shares have been issued.
 
Dividends
 
Prior to March 2010, we had never declared cash dividends on our common stock.  On March 8, 2010, our board of directors adopted a dividend policy to consider and pay annual cash dividends subject to our ability to satisfy all applicable statutory and regulatory requirements and our continued financial strength.  On May 10, 2011, the Company’s board of directors approved a dividend policy to consider and pay quarterly dividends on its common stock subject to the Company’s ability to satisfy all applicable statutory requirements and the Company’s continued financial strength, replacing the previous policy of paying annual cash dividends.  Dividend payments made for 2012, 2011 and 2010 were as follows:
 
 
Payment
 
Record Date
 
Payment Date
 
Dividend
(per share)
   
Amount
2010 (Annual)
March 18, 2010
March 25, 2010
  $ 0.10     $ 1,163  
                     
Q1 2011
March 17, 2011
March 24, 2011
  $ 0.12     $ 1,415  
Q2 2011
May 23, 2011
May 31, 2011
    0.12       1,429  
Q3 2011
August 19, 2011
August 26, 2011
    0.12       1,365  
Q4 2011
December 5, 2011
December 19, 2011
    0.12       1,336  
Total for 2011
      $ 0.48     $ 5,545  
                     
Q1 2012
March 19, 2012
March 26, 2012
  $ 0.13     $ 1,437  
Q2 2012
June 18, 2012
June 25, 2012
    0.13       1,439  
Q3 2012
September 17, 2012
September 24, 2012
    0.13       1,439  
Q4 2012
December 10, 2012
December 17, 2012
    0.13       1,447  
Total for 2012
      $ 0.52     $ 5,762  
 
Stock Repurchase Program
 
In May 2011, the Company’s board of directors authorized the repurchase of up to $20.0 million of shares of its common stock. At December 31, 2011, the repurchase program was complete and total of 1,184,200 shares have been repurchased for $20.0 million.
 
8.
EMPLOYEE BENEFIT PLANS
 
The Company maintains a contributory retirement plan for all full-time employees with at least 90 days of service.  The plan is designed to provide tax-deferred income to the Company’s employees in accordance with the provisions of Section 401(k) of the Internal Revenue Code.
 
The plan provides that each participant may contribute the maximum allowable under Internal Revenue Service regulations.  For 2012, 2011 and 2010, the Company matched 50% of the first 5% of participant contributions.  Matching contributions vest over the first five years of employment.  Company contributions to the plan were $424, $409, and $344 in 2012, 2011 and 2010, respectively.
 
 
F-16

 
 
9.
GEOGRAPHIC INFORMATION
 
Net sales and long-lived assets (property, plant and equipment and goodwill and intangible assets) by region were as follows (net sales are attributed to regions based on the locations of customers):
 
   
2012
   
2011
   
2010
 
   
Net Sales
   
 
Long-Lived Assets
   
Net Sales
   
Long-Lived Assets
   
Net Sales
   
Long-Lived Assets
 
North America
  $ 282,497     $ 40,965     $ 356,257     $ 42,147     $ 257,740     $ 42,838  
 
Foreign
    60,166       2,842       56,402       2,592       49,157       2,594  
 
 
  $ 342,663     $ 43,807     $ 412,659     $ 44,739     $ 306,897     $ 45,432  
 
10.
CUSTOMER INFORMATION
 
No single customer accounted for 10% or more of consolidated net sales for 2012.  The Company’s largest customer accounted for 26.8% of consolidated sales for 2011, and 18.5% of consolidated sales for 2010.  At December 31, 2011, the Company’s largest customer represented 7.2% of accounts receivable.
 
 
F-17

 
 
11.
DERIVATIVE FINANCIAL INSTRUMENTS
 
The Company periodically enters into foreign currency exchange contracts designed to mitigate the impact of foreign currency risk.  Prior to November 2012, the Company had not instituted a formal foreign exchange policy.  All contracts entered into prior to this date are accounted for as undesignated hedges and, therefore changes in fair value are recognized each period in other income (expense) in our consolidated statements of income.  The fair value of the contracts is presented in accounts receivable in our consolidated balance sheets.  At December 31, 2011, the Company had foreign exchange contracts with notional values of $600 that matured in April 2012.  At December 31, 2012, the Company also had undesignated foreign currency hedge contracts with notional amounts of $6,600 which were directly offset by corresponding foreign currency contracts.  These contracts expire over a period from September to November 2013.  A gain of $4 and $43 was recognized for 2012 and 2011, respectively.
 
In November 2012, the Company adopted a formal foreign currency exchange policy.  Under this policy, for those foreign currency exchange contracts that qualify for hedge accounting treatment, changes in the fair value of such instruments are included in accumulated other comprehensive income (loss). The Company also assesses, both at inception and on an ongoing basis, whether the derivatives that are used in the hedging transaction are highly effective in offsetting changes in cash flows of the hedged items.  For those foreign currency exchange contracts that do not qualify for hedge accounting treatment, changes in the fair value of such instruments are recognized each period in other income (expense) in our consolidated statements of income. In December 2012, the Company entered into foreign exchange currency contracts with notional values of $12,950 maturing from September 2013 to October 2014 that were considered cash flow hedges.  Changes in fair value of such cash flow hedges are recorded in accumulated other comprehensive income (loss) to the extent that the hedges are considered effective.  At December 31, 2012, the change in fair value was minimal.
 
The following table presents the financial instruments measured at fair value on a recurring basis:
 
   
December 31, 2012
   
Level 1
 
Level 2
 
Level 3
 
Total
                 
Current Assets
               
Derivative financial instruments
               
Foreign currency contracts
 
$
--
   
$
326
   
$
--
   
$
326
 
Total assets
 
$
--
   
$
326
   
$
--
   
$
326
 
Current Liabilities
               
Derivative financial instruments
               
Foreign currency contracts
 
$
--
   
$
326
   
$
--
   
$
326
 
Total liabilities
 
$
--
   
$
326
   
$
--
   
$
326
 
 
 
   
December 31, 2011
   
Level 1
 
Level 2
 
Level 3
 
Total
                 
Current Assets
               
Derivative financial instruments
               
Foreign currency contracts
 
$
--
   
$
43
   
$
--
   
$
43
 
Total assets
 
$
--
   
$
43
   
$
--
   
$
43
 
Current Liabilities
               
Derivative financial instruments
               
Foreign currency contracts
 
$
--
   
$
--
   
$
--
   
$
--
 
Total liabilities
 
$
--
   
$
--
   
$
--
   
$
--
 
 
 
F-18

 
 
12.
QUARTERLY FINANCIAL INFORMATION (UNAUDITED)
 
The following is a summary of the unaudited quarterly financial information for the years ended December 31, 2012 and 2011:
 
   
Net Sales
   
Operating Income
   
Net
Income
   
Basic Income
Per Share
   
Diluted
Income Per Share
   
Cash
Dividends Declared Per Share
 
                                     
2012
                                   
First Quarter
  $ 94,957     $ 3,882     $ 2,010     $ 0.18     $ 0.18     $ 0.13  
Second Quarter
    87,346       3,361       2,546       0.23       0.23       0.13  
Third Quarter
    77,957       2,534       2,890       0.26       0.26       0.13  
Fourth Quarter
    82,403       2,773       1,676       0.15       0.15       0.13  
Total
  $ 342,663     $ 12,550     $ 9,122     $ 0.82     $ 0.82     $ 0.52  
                                                 
2011
                                               
First Quarter
  $ 108,925     $ 12,584     $ 7,444     $ 0.63     $ 0.61     $ 0.12  
Second Quarter
    97,566       9,777       5,776       0.49       0.47       0.12  
Third Quarter
    96,777       8,139       4,871       0.42       0.41       0.12  
Fourth Quarter
    109,391       8,195       4,917       0.44       0.43       0.12  
Total
  $ 412,659     $ 38,695     $ 23,008     $ 1.98     $ 1.92     $ 0.48  
 
13.
SUBSEQUENT EVENTS
 
On December 27, 2012, we formed Delavan Automotive LLC, of which we have a controlling interest, for the sale of larger capacity automobile transport trailers in the United States and Canada.  We will produce trailers under this entity beginning in 2013 as an extension of our current product offering.
 
On March 4, 2013, the Company’s board of directors declared a quarterly cash dividend of $0.14 per share.  The dividend is payable March 25, 2013 to shareholders of record as of March 18, 2013.
 
 
F-19

 
 
MILLER INDUSTRIES, INC. AND SUBSIDIARIES
 
SCHEDULE II –VALUATION AND QUALIFYING ACCOUNTS
 
(in thousands)
 
   
Balance at Beginning of Period
   
Charged to Expense
   
Accounts Written Off
   
Balance at
End of
Period
 
       
Year ended December 31, 2010
                       
Deduction from asset accounts:
                       
Allowance for doubtful accounts
  $ 2,090       220       (467 )   $ 1,843  
                                 
Year ended December 31, 2011
                               
Deduction from asset accounts:
                               
Allowance for doubtful accounts
  $ 1,843       240       (392 )   $ 1,691  
                                 
Year ended December 31, 2012
                               
Deduction from asset accounts:
                               
Allowance for doubtful accounts
  $ 1,691       240       (317 )   $ 1,614  
 
 
S-1

 
 
SIGNATURES
 
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized, on the 6th day of March, 2013.
 
 
MILLER INDUSTRIES, INC.
 
  By:  /s/ Jeffrey I. Badgley
   Jeffrey I. Badgley
   Chief Executive Officer and Director
 
Know all men by these presents, that each person whose signature appears below constitutes and appoints Jeffrey I. Badgley as attorney in fact, with power of substitution, for him in any and all capacities, to sign any amendments to this Report on Form 10 K, and to file the same, with exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that said attorney in fact may do or cause to be done by virtue hereof.
 
Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of the Registrant in the capacities indicated on the 6th day of March, 2013.
 
Signature
 
Title
     
/s/ William G. Miller                                                          
 
Chairman of the Board of Directors
William G. Miller
   
     
/s/ Jeffrey I. Badgley                                                           
 
Chief Executive Officer and Director
Jeffrey I. Badgley
   
     
/s/ J. Vincent Mish                                                           
 
Executive Vice President, Treasurer and Chief Financial Officer (Principal Financial and Accounting Officer)
J. Vincent Mish
 
   
/s/ Theodore H. Ashford, III                                                           
 
Director
Theodore H. Ashford, III
   
     
/s/ A. Russell Chandler, III                                                           
 
Director
A. Russell Chandler, III
   
     
/s/ Richard H. Roberts                                                           
 
Director
Richard H. Roberts
   
 
 
 

 
 
EXHIBIT INDEX
 
Exhibit Number
 
Description
     
21
 
Subsidiaries of the Registrant
 
23.1
 
Consent of Joseph Decosimo and Company, PLLC
 
24
 
Power of Attorney (see signature page)
 
31.1
 
Certification Pursuant to Rules 13a-14(a)/15d-14(a) by Chief Executive Officer
 
31.2
 
Certification Pursuant to Rules 13a-14(a)/15d-14(a) by Chief Financial Officer
 
32.1
 
Certification Pursuant to Section 1350 of Chapter 63 of Title 18 of United States Code by Chief Executive Officer
 
32.2
 
Certification Pursuant to Section 1350 of Chapter 63 of Title 18 of United States Code by Chief Financial Officer
 
101
 
The following financial information from Miller Industries, Inc.’s Annual Report on Form 10-K for the year ended December 31, 2012, formatted in XBRL (eXtensible Business Reporting Language): (i)  Consolidated Balance Sheets as of December 31, 2012 and December 31, 2011, (ii)  Consolidated Statements of Income for the years ended December 31, 2012, 2011 and 2010, (iii) Consolidated Statements of Comprehensive Income for the years ended December 31, 2012, 2011 and 2010, (iv) Consolidated Statements of Shareholder’s Equity for the years ended December 31, 2012, 2011 and 2010, (v) Consolidated Statements of Cash Flows for the years ended December 31, 2012, 2011 and 2010, and (vi) the Notes to Consolidated Financial Statements.