Edgar Filing: METALS USA HOLDINGS CORP.

Large accelerated filer

Accelerated filer

Non-accelerated filer

Smaller reporting company

Form 10-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE

SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2012

Commission File Number 001-34685

METALS USA HOLDINGS CORP.

(Exact name of registrant as specified in its charter)


Delaware		20-3779274
(State or other jurisdiction of incorporation or organization)		(I.R.S. Employer Identification No.)

2400 E. Commercial Blvd., Suite 905 Fort Lauderdale, Florida		33308
(Address of principal executive offices)		(Zip Code)

Registrant’s telephone number, including area code: (954) 202-4000

Securities registered pursuant to Section 12(b) of the Act:


Title of each class		Name of each exchange on which registered
Common Stock, $0.01 par value per share		New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ¨ No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ¨ No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¨

Indicate by check mark whether the registrant submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No x

The aggregate market value of the voting stock held by non-affiliates of the registrant, based on the closing price on the New York Stock Exchange on June 30, 2012, was approximately $182,600,000. As of March 8, 2013, 37,310,116 shares of the registrant’s common stock were outstanding.

DOCUMENTS INCORPORATED BY REFERENCE:

None

TABLE OF CONTENTS


Part I

Item 1.	Business	4

Item 1A.	Risk Factors	15

Item 1B.	Unresolved Staff Comments	20

Item 2.	Properties	21

Item 3.	Legal Proceedings	22

Item 4.	Mine Safety Disclosures	23

Part II

Item 5.	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	24

Item 6.	Selected Financial Data	27

Item 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	28

Item 7A.	Quantitative and Qualitative Disclosures About Market Risk	45

Item 8.	Financial Statements and Supplementary Data
	Report of Independent Registered Public Accounting Firm	46
	Consolidated Balance Sheets	47
	Consolidated Statements of Operations and Comprehensive Income	48
	Consolidated Statements of Stockholders’ Equity	49
	Consolidated Statements of Cash Flows	50
	Notes to Consolidated Financial Statements	51

Item 9.	Changes in and Disagreements With Accountants on Accounting and Financial Disclosure	76

Item 9A.	Controls and Procedures	76

Part III

Item 10.	Directors, Executive Officers and Corporate Governance	78

Item 11.	Executive Compensation	82

Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	95

Item 13.	Certain Relationships and Related Transactions, and Director Independence	97

Item 14.	Principal Accounting Fees and Services	98

Part IV

Item 15.	Exhibits, Financial Statement Schedules	99

Signatures		106

Index of Exhibits		107

FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains statements reflecting assumptions, expectations, projections, intentions or beliefs about future events that are intended as “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. All statements included or incorporated by reference in this Annual Report, other than statements of historical fact, that address activities, events or developments that we expect, believe or anticipate will or may occur in the future are forward-looking statements. These statements appear in a number of places, including Item 1. “Business,” Item 1A. “Risk Factors,” Item 3. “Legal Proceedings” and Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” These statements represent our reasonable judgment on the future based on various factors and using numerous assumptions and are subject to known and unknown risks, uncertainties and other factors that could cause our actual results and financial position to differ materially from those contemplated by the statements. You can identify these statements by the fact that they do not relate strictly to historical or current facts. They use words such as “anticipate,” “believe,” “estimate,” “expect,” “forecast,” “may,” “should,” “plan,” “project” and other words of similar meaning. In particular, these include, but are not limited to, statements relating to the following:

•

our projected operating or financial results, including anticipated cash flows from operations and asset sale proceeds for 2013;

•

our expectations regarding capital expenditures, interest expense and other payments;

•

our beliefs and assumptions relating to our liquidity position, including our ability to adapt to changing market conditions; and

•

our ability to compete effectively for market share with industry participants.

Any or all of our forward-looking statements may turn out to be wrong. They can be affected by inaccurate assumptions or by known or unknown risks, uncertainties and other factors including, among others:

•

the satisfaction of the conditions to consummate our acquisition by Reliance Steel & Aluminum Co., including, among other things:

•

the failure to receive, on a timely basis or otherwise, the required approval by our stockholders;

•

the risk that a condition precedent to closing of the proposed transaction may not be satisfied;

•

Metals USA’s and Reliance Steel & Aluminum Co.’s ability to consummate the merger;

•

the non-occurrence of any event, change or other circumstance that could give rise to the termination of the merger transaction;

•

operating costs and business disruption as a result of the transaction with Reliance Steel & Aluminum Co. may be greater than expected;

•

the ability of Metals USA to retain and hire key personnel and maintain relationships with providers other business partners pending the consummation of the transaction with Reliance Steel & Aluminum Co.; and

•

the outcome of any legal proceedings that have been or may be instituted against Metals USA and/or others relating to the transaction with Reliance Steel & Aluminum Co.;

•

supply, demand, prices and other market conditions for steel and other commodities;

•

the timing and extent of changes in commodity prices;

•

the effects of competition in our business lines;

•

the condition of the steel and metal markets generally, which will be affected by interest rates, foreign currency fluctuations and general economic conditions;

•

the ability of our counterparties to satisfy their financial commitments;

•

tariffs and other government regulations relating to our products and services;

•

adverse developments in our relationship with both our key employees and unionized employees;

•

operational factors affecting the ongoing commercial operations of our facilities, including catastrophic weather-related damage, regulatory approvals, permit issues, unscheduled blackouts, outages or repairs, unanticipated changes in fuel costs or availability of fuel emission credits or workforce issues;

•

our ability to operate our businesses efficiently, manage capital expenditures and costs (including general and administrative expenses) and generate earnings and cash flow;

•

restrictive covenants in our indebtedness that may adversely affect our operational flexibility;

•

general political conditions and developments in the United States and in foreign countries whose affairs affect supply, demand and markets for steel, metals and metal products;

•

our ability to retain key employees; and

•

our expectations with respect to our acquisition activity.

In addition, there may be other factors that could cause our actual results to be materially different from the results referenced in the forward-looking statements, some of which are included elsewhere in this Form 10-K, including in Item 1A. “Risk Factors,” and in Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Many of these factors will be important in determining our actual future results. Consequently, no forward-looking statement can be guaranteed. Our actual future results may vary materially from those expressed or implied in any forward-looking statements. All forward-looking statements contained in this Form 10-K are qualified in their entirety by this cautionary statement. Forward-looking statements speak only as of the date they are made, and we disclaim any obligation to update any forward-looking statements to reflect events or circumstances after the date of this Form 10-K, except as otherwise required by applicable law.

PART I

Item 1. Business

History

Metals USA Holdings Corp. is a corporation formed under the laws of the state of Delaware (“Metals USA Holdings”). Metals USA Holdings and its wholly owned subsidiaries, Flag Intermediate Holdings Corporation (“Flag Intermediate”) and Metals USA, Inc. (“Metals USA”), and the wholly owned subsidiaries of Metals USA, are referred to collectively herein as the “Company.”

On May 18, 2005, Metals USA Holdings and its wholly owned subsidiary, Flag Acquisition Corporation, a Delaware corporation (“Flag Acquisition”), entered into an Agreement and Plan of Merger (the “Flag Merger Agreement”) with Metals USA. On November 30, 2005, Flag Acquisition, then a wholly owned subsidiary of Flag Intermediate, merged with and into Metals USA, with Metals USA being the surviving corporation. Flag Intermediate and Flag Acquisition conducted no operations during the period from May 9, 2005 (date of inception) to November 30, 2005. As a result, all of Metals USA’s issued and outstanding common stock is held indirectly by Metals USA Holdings through Flag Intermediate, its wholly owned subsidiary. Metals USA Holdings was formed by investment funds associated with Apollo Management V L.P. (“Apollo Management” and together with its affiliated investment entities, “Apollo”). The acquisition of Metals USA by Apollo is referred to in this Form 10-K as the “Apollo Merger.”

On April 14, 2010, Metals USA Holdings completed its initial public offering of 11,426,315 shares of its common stock at $21.00 per share (the “IPO”), as described in the Company’s Registration Statement on Form S-1, as amended (File No. 333-150999). Subsequent to the IPO, Apollo owned approximately 64% of the capital stock of Metals USA Holdings.

On August 14, 2012, Apollo completed the sale of 4,000,000 shares of our Company common stock, pursuant to the terms of an underwriting agreement by and among the Company and several underwriters, as described more fully in a Form 8-K filed by the Company on August 14, 2012, at a price of $14.08625 per share. The offering was made pursuant to the Company’s shelf registration statement on Form S-3, as amended (File No. 333-180102). Subsequent to the secondary offering, Apollo owns approximately 53% of the capital stock of Metals USA Holdings.

Proposed Acquisition by Reliance Steel & Aluminum Co.

On February 6, 2013, Metals USA Holdings, Reliance Steel & Aluminum Co. (“Reliance”) and RSAC Acquisition Corp. (a wholly-owned subsidiary of Reliance (“Merger Sub”)), entered into an Agreement and Plan of Merger (the “Merger Agreement”) under which Reliance has agreed to acquire Metals USA Holdings. Pursuant to the Merger Agreement, and subject to the satisfaction or waiver of the conditions therein, Merger Sub will be merged with and into Metals USA Holdings (the “Merger”), with Metals USA Holdings surviving as a wholly-owned subsidiary of Reliance.

At the effective time of the Merger, each outstanding share of Metals USA Holdings common stock (other than dissenting shares, treasury shares, shares owned by Reliance and its subsidiaries and shares owned by any subsidiary of Metals USA Holdings) will be cancelled and converted into the right to receive $20.65 in cash, without interest. Also at the effective time of the Merger, each option to acquire common stock granted under any Metals USA Holdings equity incentive plan, whether vested or unvested, that is outstanding will become fully vested and be converted into the right to receive an amount in cash equal to the product of (i) the excess, if any, of $20.65 over the per share exercise price of the option multiplied by (ii) the total number of shares of common stock subject to the option. Each share of restricted stock granted under any Metals USA Holdings equity incentive plan, whether vested or unvested, will be cancelled and converted into the right to receive $20.65 per share in cash.

The parties’ obligations to complete the Merger are conditioned upon customary closing conditions, including the approval of the Merger and the adoption of the Merger Agreement by the holders of a majority of the outstanding shares of Metals USA Holdings common stock and the expiration or termination of the applicable Hart-Scott-Rodino Antitrust Improvements Act waiting period. The Merger is not conditioned upon Reliance’s receipt of financing. The Merger Agreement contains customary representations, warranties and covenants by each of Reliance and Metals USA Holdings.

Additional information about the Merger and the terms of the Merger Agreement can be found in the Current Report on Form 8-K filed by the Company under Item 1.01 of that Form 8-K on February 7, 2013, including the full text of the Merger Agreement filed as exhibit 2.1 to that Form 8-K and incorporated by reference therein. Also, on March 11, 2013, we filed with the Securities and Exchange Commission (“SEC”) the definitive proxy statement regarding the proposed Merger and related matters. Investors and security holders are urged to read the definitive proxy statement and other documents relating to the Merger because they contain important information. Investors and security holders may obtain a free copy of the definitive proxy statement and other documents that we file with the SEC from the SEC’s website at www.sec.gov and our website at www.metalsusa.com. In addition, the definitive proxy statement and other documents filed by us with the SEC may be obtained from us free of charge by directing a request to Metals USA Holdings Corp., Corporate Secretary, 2400 E. Commercial Blvd., Suite 905, Fort Lauderdale, Florida 33308, telephone: (954) 202-4000.

Overview

As one of the largest metal service center businesses in the United States, we believe that we are a leading provider of value-added processed carbon steel, stainless steel, aluminum, red metals, manufactured metal components and inventory management services. According to Metal Center News, Metals USA is ranked number eight among service centers in North America based on 2011 revenues. We believe that we serve an important function as an intermediary between primary metal producers that generally sell large volumes in limited sizes and configurations and end-users that generally require more services and smaller quantities of customized products. Operating 48 metal service centers in the United States, we sold more than 1,550 thousand tons of metal products in 2012. We sell our products and services to a diverse customer base and broad range of end-user markets, including the aerospace, automotive industry manufacturing, defense, heavy equipment, marine transportation, commercial construction, office furniture manufacturing, and energy and oilfield services industries, among several others, throughout the United States. We strive to earn a margin over the cost of metal. Management’s strategy, manifested through organic growth initiatives and our acquisitions of metal service center businesses, focuses on maximizing the margin we earn over the cost of metal by offering additional value-added processing services and diversifying our product mix. We believe our growth and acquisition strategy, in combination with management’s demonstrated ability to manage metal purchasing and inventories to consistently meet our customers’ high expectations for service and reliability, serves as a foundation for future revenue growth and stable operating profit per ton through the economic cycle.

We operate in three reportable business segments: Plates and Shapes Group, Flat Rolled and Non-Ferrous Group, and Building Products Group. Our Plates and Shapes and Flat Rolled and Non-Ferrous Groups perform customized, value-added processing services to unimproved steel and other metals required to meet specifications provided by our customers in addition to offering inventory management and just-in-time delivery services, among others. These services enable our customers to reduce material costs, decrease capital required for raw materials inventory and processing equipment, and save time, labor, warehouse space and other expenses. The customers of our Plates and Shapes and Flat Rolled and Non-Ferrous Groups are in the aerospace, automotive industry manufacturing, defense, heavy equipment, marine transportation, commercial construction, office furniture manufacturing, and energy and oilfield services industries. Our Building Products Group manufactures finished building products for distributors and contractors engaged in the residential remodeling industry.

Growth Through Acquisitions

Strategic acquisitions of metal service center businesses that complement our overall product and service base have been an important element to our growth strategy. The following acquisitions occurred over the last seven years.

In May 2006, we acquired Port City Metal Services (“Port City”) in Tulsa, Oklahoma. Port City increased our plate processing capabilities to customers serving the oil field, construction equipment and refining industries.

In June 2007, we acquired Lynch Metals, Inc. (“Lynch Metals”) with locations in Union, New Jersey and Anaheim, California. Lynch Metals provides value-added, specialized aluminum products to customers who are predominantly manufacturers of air/heat transfer products specifically focused on aerospace equipment, industrial and automotive applications.

In February 2009, we acquired VR Laser Services USA, Inc., which we subsequently renamed Philadelphia Plate (“Philadelphia Plate”), which further expanded our existing processing capabilities in the northeast region of the United States focused primarily on the marine and defense industries.

In June 2010, we acquired J. Rubin & Co. (“J. Rubin”), a metal service center business that operates in Illinois, Wisconsin and Minnesota with a broad mix of products and processing services that are provided to a diverse range of customer end markets.

In December 2010, we completed the acquisition of Ohio River Metal Services (“ORMS”), located in Jeffersonville, Indiana. ORMS operates a flat rolled metal service center that provides metal products and processing services to customers throughout the Ohio Valley.

In March 2011, we completed the acquisition of The Richardson Trident Company (“Trident”). Trident is a general line metal service center with fabricating capabilities designed to service the oil and gas industry, and is also a wholesale distributor of metals, plastics and electronic parts. Trident operates under The Trident Company and The Altair Company trade names. Trident’s principal facility is in Richardson, Texas with branch locations in Houston and Odessa, Texas; Tulsa, Oklahoma; Los Angeles, California; Boston, Massachusetts and Thomasville, Georgia.

Trident provides a broad range of metals and processing services with a product mix that emphasizes aluminum, stainless steel and nickel. The majority of Trident’s customer base operates in the oil and gas services sector. Processing services include precision sawing, boring, honing, slitting, sheeting, shearing and tuning. Trident also offers supply chain solutions such as just-in-time delivery and value-added components required by original equipment manufacturers (“OEMs”).

In March 2012, we completed the acquisition of Gregor Technologies LLC and an affiliated company (“Gregor”). Gregor provides custom-crafted parts and assemblies to OEMs in several end markets, including industrial equipment, manufacturing, scientific instruments, electronics, aerospace, homeland security and defense. We believe the acquisition will broaden our participation in both new and existing end markets with Gregor’s value-added processing and service offerings.

Products and Services, Markets and Industry Information

The Company’s businesses are managed on a decentralized basis operating in business segments based on product groups. We believe this product-oriented organizational structure facilitates the efficient advancement of our goals and objectives to achieve operational synergies and focused capital investment. Operational activities and policies are managed by corporate officers and key product group executives who, on average, have over 30 years of experience and are supported by finance, purchasing and sales and marketing staff. For additional business segment information, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Results of Operations by Segment,” and Note 13 to our consolidated financial statements for the year ended December 31, 2012 included elsewhere in this report.

Metal Processing/Metal Service Center Businesses: Plates and Shapes and Flat Rolled and Non-Ferrous Groups

Industry Overview. Companies operating in the metals industry can generally be characterized as primary metal producers, metal processors/metal service centers or end-users. Our Plates and Shapes and Flat Rolled and Non-Ferrous Groups are metal processors/metal service centers. As such, we purchase carbon steel, stainless steel, aluminum, brass, copper and other metals from producing mills and then sell our metal processing services and the metal to our customers, who are generally end-users. We believe that both primary metal producers and end-users increasingly seek to have their metal processing and inventory management requirements met by value-added oriented metal processors/metal service centers like us.

Metal service centers function as key intermediaries between the primary metals producers that produce and sell larger volumes of metals in a limited number of sizes and configurations and end-users, such as fabricators, contractors and OEMs, that require smaller quantities of more customized products delivered on a just-in-time basis. End-users incorporate processed metals into finished products, in some cases with little further modification.

In our Plates and Shapes and Flat Rolled and Non-Ferrous Groups, we engage in pre-production processing of carbon steel, stainless steel, red metals and aluminum. We purchase metals from primary producers, maintain an inventory of various metals to allow rapid fulfillment of customer orders and perform customized processing services to the specifications provided by end-users. By providing these services, as well as offering inventory management and just-in-time delivery services, we enable our customers to reduce overall production costs and decrease capital required for raw materials inventory and metals processing equipment. The Plates and Shapes and Flat Rolled and Non-Ferrous Groups contributed approximately 96% of our 2012 net sales.

Metal service centers and processors purchase approximately 35% of all the metals used in the U.S. and Canada and play an important intermediary role between the production mills and the end-users. Over the last several years primary metal producers have consolidated and focused on optimizing the throughput and operating efficiencies of their production facilities. We believe this consolidation among primary steel and aluminum producers over the last several years has expanded the demand for metal distribution and service centers, and in particular those service centers capable of providing additional value-added metal processing and inventory management services. Over 300,000 end-users nationwide rely on metal service centers for their primary supply of metal products and services. End-users generally buy metal products and services from metal service centers on a margin over the cost of the metal. When customers require additional processing or inventory management services, value-added metal service centers such as ours earn an additional margin over the cost of metal.

By outsourcing their customized metal processing and inventory management needs, end-users have the potential to realize significant economic benefits by shifting the responsibility for pre-production processing to metal service centers and leveraging service centers’ just-in-time delivery and other inventory management services. These supply-chain services, which are not normally provided by primary metals producers, enable end-users to reduce input, labor and other production costs, shorten lead times, and decrease required investments in working capital, manufacturing and warehouse facilities.

We believe that long-term growth opportunities for metal service centers will continue to expand as both primary metal producers and end-users increasingly seek to have their metal processing and inventory management requirements met by value-added metal service centers. Although the service center industry remains fragmented with approximately 1,200 companies competing in North America, we believe larger service center businesses with greater scale and financial flexibility, like ours, enjoy significant advantages over smaller companies such as the ability to obtain higher discounts associated with volume purchases, a greater breadth of products and value-added services to meet the diverse needs of key end-use markets, and the more sophisticated logistics capabilities necessary to serve national accounts.

Plates and Shapes Group. The Plates and Shapes Group processes and sells steel plates and structural beams, bars, angles and tubes. We believe we are one of the largest distributors of steel plates and structural beams in the United States. In 2012, we sold approximately 634 thousand tons of products through 19 metal service centers located primarily in the southern and eastern regions of

the United States. Our metal service centers are generally equipped to provide additional value-added processing, and a substantial portion of our volume is processed prior to being delivered to the end-user. These processing services include burning, blasting and painting (the cleaning of steel plate by shot-blasting, then immediately applying a paint or primer), tee-splitting (the cutting of metal beams along the length to form separate pieces), cambering (the bending of structural shapes to improve load-bearing capabilities), leveling (the flattening of metals to uniform tolerances for proper machining), cutting, sawing, punching, drilling, beveling, surface grinding, braking (bending), shearing and cutting-to-length (the cutting of metals into pieces and along the width of a coil to create sheets or plates). We sell our products to a diversified customer base, including a large number of small customers who purchase products in small order sizes. We believe our disciplined management and hands-on service, backed by our national network of metal service centers, enables us to effectively meet our customers’ varied product and inventory management needs.

We generally earn additional margin from our customers by providing services such as product marking, item sequencing, just-in-time delivery and kitting. The customers who require these products and services are primarily in the fabrication, public and private non-residential construction, machinery and equipment, land and marine transportation, and energy industries. Because our metal service centers are generally located in close proximity to our metal suppliers and our customers, we are able to meet our customers’ product and service needs reliably and consistently. Over the last six years, we added two businesses to our Plates and Shapes portfolio through acquisitions. In May 2006, we completed the acquisition of Port City, which bolstered our presence in the construction and oil-field services sectors. In February 2009, we acquired Philadelphia Plate, which has expanded our presence in the northeast region of the United States and augmented our presence in the marine and defense sectors.

Flat Rolled and Non-Ferrous Group. The Flat Rolled and Non-Ferrous Group processes and sells flat rolled carbon and stainless steel, aluminum, brass and copper in a number of alloy grades and sizes through 29 metal service centers located primarily in the mid-western and southern regions of the United States. We sold approximately 930 thousand tons of these products in 2012, with our revenues split approximately 61% and 39% between ferrous products and non-ferrous products, respectively. Substantially all of the products from this group that are sold undergo value-added processing prior to shipment to our customers. These processing services include precision blanking (the cutting of metal into precise two-dimensional shapes), slitting (the cutting of coiled metals to specified widths along the length of the coil), shearing and cutting-to-length, punching and leveling.

We sell our products and services to customers in the electrical and appliance manufacturing, fabrication, furniture, machinery and equipment, transportation and aerospace industries. Many of our large customers purchase through pricing arrangements or contractual agreements that specify the margin over the cost of metal and we generally earn additional margin from these customers by providing services such as product marking and labeling, just-in-time delivery and kitting. We are able to provide these services reliably because our metal service centers are generally located in close proximity to our metal suppliers and our customers.

Over the last several years, we added five businesses to our Flat Rolled and Non-Ferrous portfolio through acquisitions. In July 2007, we acquired Lynch Metals, a metal service center business that provides specialized aluminum products primarily to the aerospace, industrial and automotive industries. In June 2010, we acquired J. Rubin, expanding the scope of our product lines, services and geographic footprint in the upper Midwest, in addition to allowing us to enhance our cross-selling opportunities in existing markets. In December 2010, we acquired ORMS, a metal service center with distinctive processing and service capabilities and a strategic location in an existing Midwest market. In March 2011, we acquired Trident, a wholesale distributor of metals, plastics and electronic parts with fabricating capabilities designed to service the oil and gas industry. In March 2012, we completed the acquisition of Gregor, a provider of custom-crafted parts and assemblies to OEMs in several end markets, including industrial equipment, manufacturing, scientific instruments, electronics, aerospace, homeland security and defense.

Product Mix. We provide a wide variety of metal products in different shapes and sizes to our customers. We actively manage our inventory levels and product mix in order to optimize the cost tradeoff between holding inventory and incurring a shortage situation. We strive to closely monitor our customer demand forecasts and coordinate our inventory levels and product mix with our customers’ production planning and scheduling. We also analyze macroeconomic data, end-use market data and historical usage to forecast the cyclical effect of inventory building and reduction in the industries we serve, adjusting our inventory levels and product mix accordingly. Our product mix also changes as a result of acquisitions. We believe the proactive management of our inventory levels and product mix, along with our expanding geographic footprint and diverse customer segments position us to maintain long-term profitability throughout the various stages of economic cycles. We believe that our focus on product mix enhancement helps us to mitigate the effects of uneven demand associated with specific regions and end-user industries.

Net sales by product line as a percentage of total sales for our metal service center businesses for each of the three years ended December 31, 2012, 2011, and 2010 were as follows:


	Twelve Months Ended
	December 31,
	2012			2011			2010

Carbon Flat Rolled Products		33.9	%		34.7	%		35.1	%
Mini Mill Products		11.4	%		10.5	%		11.2	%
Non-Ferrous Products		24.7	%		24.4	%		21.9	%
Plate Products		17.3	%		17.6	%		18.1	%
Structural Products		12.7	%		12.8	%		13.7	%

		100.0	%		100.0	%		100.0	%

Value-Added Processing Services. Primary producers typically find it more cost effective to focus on large volume production and sale of metals in standard sizes and configurations to large volume purchasers. We process the metals to the precise length, width, shape and surface quality specified by our customers. Our value-added processes include:

•

Precision blanking—the cutting of metal into precise two-dimensional shapes.

•

Flame cutting—the cutting of metals to produce various shapes according to customer-supplied drawings.

•

Laser and plasma cutting—the cutting of metals to produce shapes under strict tolerance requirements.

•

Slitting—the cutting of coiled metals to specified widths along the length of the coil.

•

Blasting and painting—the cleaning of steel plate by shot-blasting, then immediately applying a paint or primer.

•

Plate forming and rolling—the forming and bending of plates to cylindrical or required specifications.

•

Shearing and cutting to length—the cutting of metals into pieces and along the width of a coil to create sheets or plates.

•

Tee-splitting—the cutting of metal beams along the length to form separate pieces.

•

Cambering—the bending of structural shapes to improve load-bearing capabilities.

•

Sawing—the cutting to length of bars, tubular goods and beams.

•

Leveling—the flattening of metals to uniform tolerances for proper machining.

•

Edge trimming—the removal of a specified portion of the outside edges of coiled metal to produce uniform widths and round or smooth edges.

•

Metallurgy—the analysis and testing of the physical and chemical composition of metals.

Our additional capabilities include applications engineering and other value-added processes such as custom machining. Using these capabilities, we use processed metals to manufacture higher-value components.

Once we receive an order, we select the appropriate inventory and schedule it for processing in accordance with the customer’s requirements and specified delivery date. Orders are monitored by our computer systems, including, in certain locations, the use of bar coding to aid in and reduce the cost of tracking material. We record the source of all metal shipped to customers. This enables us to identify the source of any metal which may later be shown to not meet industry standards or that fails during or after manufacture. This capability is important to our customers as it allows them to assign responsibility for non-conforming or defective metal to the mill that produced the metal. Many of the products and services we provide can be ordered and tracked through a web-based electronic network that directly connects our computer system to those of our customers.

We cooperate with our customers and tailor our deliveries to support their needs, which in many instances consist of short lead times, multiple daily deliveries, staged deliveries, or deliveries timed for immediate production. These “just-in-time” deliveries are defined by our customers and are generally intended to minimize their inventory investment and handling requirements.

While we ship products throughout the United States, most of our customers are located within a 250-mile radius of our facilities, thus enabling an efficient delivery system capable of handling a large number of short lead-time orders. We transport most of our products directly to our customers either with our own trucks for short-distance and/or multi-stop deliveries or through common or contract trucking companies.

We have quality control systems to ensure product quality and traceability throughout processing. Quality controls include periodic supplier audits, customer-approved quality standards, inspection criteria and metals source traceability. 29 of our 48 metal service center facilities have International Standards for Organization, or “ISO,” certification.

Building Products Group

The Building Products Group manufactures and sells roofing and patio products. We generally sell these products through a network of independent distributors and home improvement contractors. Our roofing products business manufactures and sells a high performance roofing product consisting of a pressed and stone-coated steel panel that mimics the appearance of traditional shake and tile roofing. Our roofing product is well suited for all areas subject to threats of high winds, fires and hail storms. In May 2006, we acquired Duraloc Roofing Systems, Ltd., a Canadian-based company which we have re-branded as Allmet Roofing Products. This acquisition provided us with manufacturing capabilities on both the east and west coasts of North America. Our patio products business manufactures and sells building components used primarily for the erection of residential shade structures such as patio covers and enclosures. With facilities located throughout the southern and western regions of the United States, we believe we are one of only a few suppliers of patio products with national scale.

The downturn in the United States housing sector has pushed home improvement remodeling spending below its long-term trend. Falling home prices have discouraged discretionary home improvement spending and diminished the amount of equity that owners have in their homes. Prior to the downturn in the United States housing sector, the ability to borrow against equity created by rising home prices fueled remodeling activity, as well as broader consumer spending. Now that home prices have softened, owners cannot finance home improvement projects as easily. These difficult end market conditions have affected sales growth associated with our Building Products Group.

We believe a recovering economy should stabilize house prices and consumer confidence levels, encouraging homeowners to reinvest in their homes and undertake deferred repairs, replacements and improvements. Low financing costs and a wave of previously foreclosed homes coming back on the market and in need of renovation could also contribute to growth. We believe these factors, coupled with an aging American housing stock, are generating significant pent-up demand for remodeling that should manifest itself when the housing sector rebounds (however, there can be no guarantee that demand for remodeling will increase or the timing of any such rebound).

Strategy

Subject to our proposed acquisition by Reliance, our mission is to increase our position as one of the nation’s leading integrated metal processors and distributors, recognized for best in class customer service and optimal inventory management to meet customer demands, and to ensure strategic use of capital resources, continuing to strengthen the relationships we have with our suppliers, while constantly renewing our focus on safety, growth and profitability. Execution of the following strategies is critical to our success:

•

Expand Value-Added Services. We intend to continue to invest in capital projects that provide attractive returns and to continue to expand the value-added services we offer at each of our service center locations, a strategy we believe will both enhance our relationships with existing customers and help forge new customer relationships, both of which we believe will result in increased market share for us.

•

Increase Sales of Higher Margin Products and Services. The sale of higher margin products and services, which tend to have higher growth prospects and more stable demand, will continue to be one of our core strategies. We intend to continue executing on this strategy by increasing our core carbon offerings, non-ferrous volumes, and our sales of processed products.

•

Execute Strategic Acquisitions to Improve Our Business. The Merger Agreement with Reliance contains operating covenants that restrict our ability to engage in acquisitions. However, if the Merger with Reliance is not completed, we expect we would continue to pursue acquisitions. Historically, we have generally targeted one to two “bolt-on” acquisitions per year that would enhance our metal service center strategy. Should we pursue acquisitions in the future, we believe that we remain well positioned to take advantage of acquisition opportunities in the fragmented service center industry because of our flexible capital structure.

•

Maintain and Strengthen Our Strong Relationships with Suppliers and Customers. As one of the largest metal service center businesses in the United States, we intend to use our relationships to leverage the opportunities presented by the consolidation of steel producers and the changing needs of our customers.

•

Continue Our Strong Focus on Inventory Management. We will continue managing our inventory to maximize our returns, profitability and cash flow while maintaining sufficient inventory to respond to our customers’ demands. Constant evaluation of our inventory management framework will allow us to continue supplying our customers reliably, even during periods of tight metal supply. We expect our inventory management framework will continue generating strong earnings during periods of rising metal prices and strong cash flow during periods of declining metal prices.

•

Maintain High Free Cash Flow Generation and Conversion. We believe that we are a reliable supplier, especially of higher margin products and services, to our customers even in periods of tight supply. We believe that our reliability allows us to generate higher margins and more stable operating income through the business cycle. Moreover, we believe our inventory management framework, bolstered by our relationships with our metals suppliers, will stabilize earnings during periods of weakness. Our core business also requires minimal maintenance capital investment. We believe these strengths taken together underscore our ability to generate high levels of free cash flow, which will enable us to reinvest in our business, consummate future acquisitions, reduce debt, and achieve other corporate and financial objectives.

•

Maintain Our Focus on Safety Throughout Our Operating Facilities. We remain committed to the belief that nothing is more important than the safety of our people and will continue our disciplined focus on constantly improving the safety performance of our operations.

Raw Materials and Supply

In recent years, steel, aluminum, copper and other metals production in the United States has fluctuated from period to period as mills attempt to match production to projected demand. Periodically, this has resulted in shortages of, or increased ordering lead-times for, some products, as well as fluctuations in price. Typically, metals producers announce price changes with sufficient advance notice to allow us to order additional products prior to the effective date of a price increase, or to defer purchases until a price decrease becomes effective. Our purchasing decisions are based on our forecast of the availability of metal products, ordering lead-times and pricing, as well as our prediction of customer demand for specific products.

We obtain the overwhelming majority of our metals from domestic suppliers, which include Nucor Corp., AK Steel, Arcelor-Mittal, North American Stainless, Thyssen Krupp Steel USA, and Steel Dynamics. Although we have historically purchased approximately 10% to 15% of our raw material supplies from foreign producers, domestic suppliers have always been, and we believe will continue to be, our principal source of raw material.

Although most forms of steel and aluminum produced by mills can be obtained from a number of integrated mills or mini-mills, both domestically and internationally, there are a few products that are available from only a limited number of producers. Since most metals are shipped free-on-board and the transportation of metals is a significant cost factor, we generally seek to purchase metals, to the extent possible, from the nearest mill.

During the last decade, U.S. Steel, Nucor Corp. and Arcelor Mittal acquired several of their domestic competitors, and international integrated producers merged and consolidated operations. The result of this trend has been fewer integrated producers from which we can purchase our raw materials. We believe that global consolidation of the metals industry is beneficial to the metals industry as a whole by enhancing efficiency. However, such consolidation could result in price increases for the metal that we purchase.

Sales and Marketing; Customers

We employ a sales force consisting of internal and external salespeople. Internal salespeople are primarily responsible for maintaining customer relationships, receiving and soliciting individual orders and responding to service and other inquiries by customers. Our external sales force is primarily responsible for identifying potential customers and calling on them to explain our services. We believe that our sales force is trained and knowledgeable about the characteristics and applications of various metals, as well as the manufacturing methods employed by our customers.

Our sales and marketing focus is on the identification of end-users that could achieve significant cost savings through the use of our inventory management, value-added processing, just-in-time delivery and other services. We use a variety of methods to identify potential customers, including the use of databases, direct mail and participation in manufacturers’ trade shows. Customer referrals and the knowledge of our sales force about regional end-users also result in the identification of potential customers. Once a potential customer is identified, our outside salespeople assume responsibility for visiting the appropriate contact, typically the purchasing manager or manager of operations.

Nearly all sales are on a negotiated price basis. In some cases, sales are the result of a competitive bid process where a customer provides a list of products, along with requirements, to us and several competitors and we submit a bid on each product. We have a diverse customer base, with no single customer accounting for more than 5% of our net sales in each of the last three years. Our ten largest customers represented less than approximately 14% of our net sales in 2012. For the year ended December 31, 2012, the average transaction size for our metal service centers was approximately $3,255. We have sought to enhance our position in stable growth industries that demand additional value-added services and reduce our exposure to more cyclical sectors. Through our organic growth and acquisitions, we have capitalized on opportunities to augment our existing product and service portfolio with high value-added products such as aluminum brazing sheet, armor plate, marine grade aluminum plate, and pressure vessel plate to service the aerospace, marine, defense, and oil and gas industries. Our broad portfolio of high-quality metal products and customized value-added services allows us to offer one-stop shopping to our customers. We believe the breadth of our portfolio provides a significant competitive advantage over smaller metal service centers, which generally stock fewer products and offer fewer services than we do.

LOGO

Competition

The metals distribution industry is highly fragmented and competitive. Service centers compete with each other on price, service, quality and availability of products. Markets are generally oriented on a regional and local basis. We have numerous competitors in each of our product lines and geographic locations. In every market we service we compete with various combinations of other large, value-added oriented metal processors/metal service centers some of which may have greater financial resources than we have, smaller metal processors/metal service centers and, to a much lesser extent, with primary metals producers, who typically sell to very large customers requiring regular shipments of large volumes of metals.

Our sales and services decisions are decentralized, providing local management the flexibility to quickly address local market conditions. Historically, we believe we have been able to compete effectively because of our high level of service, broad-based inventory, knowledgeable and trained sales force, integrated computer systems, modern equipment, numerous locations, geographic dispersion, operational economies of scale and combined purchasing volume. Furthermore, we believe our liquidity and overall financial position affords us a good platform with which to compete with our peers in the industry.

Government Regulation and Environmental Matters

Our operations are subject to a number of federal, state and local regulations relating to the protection of the environment and to workplace health and safety. In particular, our operations are subject to extensive federal, state and local laws and regulations governing waste disposal, air and water emissions, the handling of hazardous substances, environmental protection, remediation, workplace exposure and other matters. Hazardous materials we use in our operations include general commercial lubricants and cleaning solvents. Among the more significant regulated activities that occur at some of our facilities are: the accumulation of scrap metal, which is sold for recycling; the generation of plant trash and other solid wastes and wastewaters, such as water from burning tables operated at some of our facilities, which wastes are disposed of in accordance with the Federal Water Pollution Control Act and the Resource Conservation and Recovery Act using third-party commercial waste handlers; and the storage, handling, and use of lubricating and cutting oils and small quantities of maintenance-related products and chemicals, the health hazards of which are communicated to employees pursuant to Occupational Safety and Health Act-prescribed hazard communication efforts and the disposal or recycling of which are performed pursuant to the Resource Conservation and Recovery Act.

Generally speaking, our facilities’ operations do not involve the types of emissions of air pollutants, discharges of pollutants to land or surface water, or treatment, storage, or disposal of hazardous waste which would ordinarily require federal or state environmental permits. Some of our facilities possess authorizations for air emissions from paints and coatings, hazardous materials permits under local fire codes or ordinances for the storage and use of small quantities of combustible materials such as oils or paints, and state or local permits for on-site septic systems. Our cost of obtaining and complying with such permits has not been and is not anticipated to be material. Our operations are such that environmental regulations typically have not required us to make significant capital expenditures for environmental compliance activities.

We believe that we are in substantial compliance with all applicable environmental and workplace health and safety laws and do not currently anticipate that we will be required to expend any substantial amounts in the foreseeable future in order to meet such requirements. However, some of the properties we own or lease are located in areas with a history of heavy industrial use, and are near sites listed on the Comprehensive Environmental Response, Compensation, and Liability Act (“CERCLA”) National Priority List.

CERCLA establishes joint and several responsibility for clean-up without regard to fault for persons who have arranged for disposal of hazardous substances at sites that have become contaminated and for persons who own or operate contaminated facilities. We have a number of properties located in or near industrial or light industrial use areas; accordingly, these properties may have been contaminated by pollutants which would have migrated from neighboring facilities or have been deposited by prior occupants. Some of our properties are affected by contamination from leaks and drips of cutting oils and similar materials. The costs of clean-ups to date have not been material. We are not currently subject to any claims or notices with respect to clean-up or remediation under CERCLA or similar laws for contamination at our leased or owned properties or at any off-site location. However, we cannot rule out the possibility that we could be notified of such claims in the future. It is also possible that we could be identified by the Environmental Protection Agency, a state agency or one or more third parties as a potentially responsible party under CERCLA or under analogous state laws.

Management Information Systems

Both the Plates and Shapes Group and Flat Rolled and Non-Ferrous Group metal service centers use a system marketed and distributed specifically for the metal service center industry. During 2003, we completed a similar common-platform initiative in the Building Products Group. Some of our subsidiaries currently use electronic data interchange, through which they offer customers a paperless process with respect to order entry, shipment tracking, billing, remittance processing and other routine activities. Additionally, several of our subsidiaries also use computer-aided drafting systems to directly interface with computer-controlled metals processing, resulting in more efficient use of material and time.

We believe investment in uniform management information systems and computer-aided manufacturing technology permits us to respond quickly and proactively to our customers’ needs and service expectations. These systems are able to share data regarding inventory status, order backlog, and other critical operational information on a real-time basis.

Employees

As of December 31, 2012, we employed approximately 2,550 persons. As of December 31, 2012, approximately 180, or approximately 7% of our employees, at various sites were members of unions: the United Steelworkers of America; the Sheet Metals Workers Union; the International Association of Bridge, Structural, and Ornamental Ironworkers of America; and the International Brotherhood of Teamsters. Our relationship with these unions generally has been satisfactory. Within the last five years, we have not experienced any work stoppages at any of our facilities. We are currently a party to seven collective-bargaining agreements. Six expire in 2013 and one expires in 2014. Presently, we do not anticipate any problems or issues with respect to renewing these agreements upon acceptable terms. Historically, we have succeeded in negotiating new collective bargaining agreements without a strike and we expect to succeed in negotiating new collective bargaining agreements with respect to the agreements that expire in 2013 and 2014.

See “Risk Factors—Our ability to retain our key employees is critical to the success of our business, and failure to do so may adversely affect our revenues and as a result could materially adversely affect our business, financial condition, results of operations and cash flows” and “Risk Factors—Adverse developments in our relationship with our unionized employees could adversely affect our business.”

Vehicles

We operate a fleet of owned or leased trucks and trailers, as well as forklifts and support vehicles. We believe these vehicles are generally well maintained and adequate for our current operations.

Risk Management and Insurance

The primary risks in our operations are bodily injury, property damage and vehicle liability. We maintain general and vehicle liability insurance, liability insurance for bodily injury and property damage and workers’ compensation coverage, which we consider sufficient to protect us against a catastrophic loss due to claims associated with these risks.

Safety

Our goal is to provide an accident-free workplace. We are committed to continuing and improving upon each facility’s focus and emphasis on safety in the workplace. Our safety program includes regular weekly or monthly field safety meetings and training sessions to teach proper safety procedures. A comprehensive “best practices” safety program which has been implemented throughout our operations ensures that all employees comply with our safety standards, as well as those established by our insurance carriers, and federal, state and local laws and regulations. This program is led by the corporate office, with the assistance of each of our product group presidents, executive officers and industry consultants with expertise in workplace safety. Furthermore, the Compensation Committee of our Board of Directors considers workplace safety as an important factor in determining the annual bonus amounts awarded to our executive officers.

Financial Information About Segments

For information regarding revenues from external customers, measures of profit or loss and total assets for the last three years for each segment, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Results of Operations by Segment” and Note 13 to our consolidated financial statements for the year ended December 31, 2012.

Patents, Trademarks and Other Intellectual Property Rights

We own several U.S. patents, trademarks, service marks and copyrights. Certain of the trademarks and patents are registered with the U.S. Patent and Trademark Office and, in some cases, with trademark offices of foreign countries. We consider other information owned by us to be trade secrets. We protect our trade secrets by, among other things, entering into confidentiality agreements with our employees and implementing security measures to restrict access to such information. We believe that our safeguards provide adequate protection to our proprietary rights. While we consider all of our intellectual property to be important, we do not consider any single intellectual property right to be essential to our operations as a whole.

Seasonal Aspects, Renegotiation and Backlog

There is a slight decrease in our business during the winter months because of inclement weather conditions and the seasonality of customer end markets. No material portion of our business is subject to renegotiation of profits or termination of contracts at the election of the government. Because of the just-in-time delivery policy and the short lead-time nature of our business, we do not believe the information on backlog of orders is material to an understanding of our business.

Foreign Operations

We do not have any material long-term assets or customer relationships outside of the United States. We have no material foreign operations or subsidiaries.

Research and Development

We do not incur material expenses in research and development activities but do participate in various research and development programs. We address research and development requirements and product enhancement by maintaining a staff of technical support, quality assurance and engineering personnel.

Disclosure pursuant to Section 219 of the Iran Threat Reduction and Syria Human Rights Act

On February 12, 2013, certain investment funds affiliated with Apollo Global Management, LLC beneficially owned approximately 19.6% of the ordinary shares of LyondellBasell Industries N.V. (“LyondellBasell”) and have certain director nomination rights. LyondellBasell may be deemed to be under common control with the Company, but this statement is not meant to be an admission that common control exists. As a result, it appears that we are required to provide disclosures as set forth herein pursuant to Section 219 of the new Iran Threat Reduction and Syria Human Rights Act of 2012 and Section 13(r) of the Securities Exchange Act of 1934, as amended. The Annual Report on Form 10-K for the year ended December 31, 2012, filed by LyondellBasell with the SEC on February 12, 2013, contained the disclosure set forth below (with all references contained therein to “the Company” being references to LyondellBasell and its consolidated subsidiaries). The disclosure set forth below does not relate to any activities conducted by us and does not involve us or our management. The disclosure relates solely to activities conducted by LyondellBasell and its consolidated subsidiaries.

“Disclosure pursuant to Section 219 of the Iran Threat Reduction & Syria Human Rights Act

Certain non-U.S. subsidiaries of our predecessor, LyondellBasell AF, licensed processes to construct and operate manufacturing plants in Iran that produce polyolefin plastic material, which is used in the packaging of household and consumer goods. The subsidiaries also provided engineering support and supplied catalyst products to be used in these manufacturing operations. In 2009, the Company made the decision to suspend the pursuit of any new business dealings in Iran.

As previously disclosed by the Company, in 2010, our management made the further decision to terminate all business by the Company and its direct and indirect subsidiaries with the government, entities and individuals in Iran. The termination was made in accordance with all applicable laws and with the knowledge of U.S. Government authorities. As part of the termination, we entered into negotiations with Iranian counterparties in order to exit our contractual obligations. As described below, two transactions

occurred under settlement agreements in early 2012, although the agreements to cease our activities with these counterparties were entered into in 2011. In January 2012, one of our non-U.S. subsidiaries received a final payment of approximately €3.5 million for a shipment of catalyst from an entity that is 50% owned by the National Petrochemical Company of Iran.

Our shipment of the catalyst was in February 2012 as part of the agreement related to our termination and cessation of all business under agreements with the counterparty. In 2012, the gross revenue from this limited activity was approximately, €4.2 million and profit attributable to it was approximately, €2.4 million.

In January and February of 2012, one of the Company’s non-U.S. subsidiaries provided certain engineering documents relating to a polyolefin plastic process to a licensee comprising three Iranian companies, one of which is 20% owned by the National Oil Company of Iran. The provision of documents was the Company’s final act with respect to the termination and cessation of all business under agreements with the counterparties. No gross revenue or profit was attributable to this activity in 2012. The transactions disclosed in this report do not constitute violations of applicable anti-money laundering laws or sanctions laws administered by the U.S. Department of the Treasury, Office of Foreign Assets Control (OFAC), and are not the subject of any enforcement actions under the Iran sanction laws.

We have not conducted, and do not intend to conduct, any further business activities in Iran or with Iranian counterparties.”

Communication with the Company

The Company’s required Securities and Exchange Act filings such as annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports are available free of charge through the Company’s website, www.metalsusa.com, as soon as reasonably practicable after they have been filed with or furnished to the SEC. All of these materials are located at the “Investor Relations” link. They can also be obtained free of charge upon request to the Company’s principal address: Metals USA Holdings Corp., 2400 E. Commercial Blvd., Suite 905, Fort Lauderdale, Florida 33308.

Item 1A. Risk Factors

In addition to the factors discussed elsewhere in this report and in Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” the following are some of the potential risk factors that could cause our actual results to differ materially from those projected in any forward-looking statements. You should carefully consider the risk factors set forth below, as well as other information contained in this document, when evaluating your investments in our securities. Any of the following risks could materially and adversely affect our business, financial condition or results of operations.

Risks Related to Our Potential Acquisition by Reliance

The announcement and pendency of our acquisition by Reliance could adversely affect our business, financial results and operations.

The announcement and pendency of the proposed acquisition could cause disruptions in and create uncertainty surrounding our business, including affecting our relationships with our customers, suppliers and employees, which could have an adverse effect on our business, financial results and operations. In particular, we could lose important personnel as a result of the departure of employees who decide to pursue other opportunities in light of the proposed acquisition. We could potentially lose customers or suppliers, or contracts could be delayed or decreased. In addition, we have diverted, and will continue to divert, significant management resources in an effort to complete the acquisition, which could adversely affect our business and results of operations.

We are also subject to restrictions contained in the Merger Agreement on the conduct of our business prior to the consummation of the Merger, including restrictions on our ability to acquire other businesses, amend our organizational documents, and incur indebtedness. These restrictions could result in our inability to respond effectively to competitive pressures, industry developments and future opportunities and may otherwise harm our business, financial results and operations.

The failure by Reliance to complete its acquisition of us could adversely affect our business and the market price of our common stock and could result in substantial termination costs.

There is no assurance that completion of the acquisition by Reliance or any other transaction will occur. Consummation of the Merger is subject to various conditions, including the approval of the Merger Agreement and the Merger by the holders of a majority of our outstanding shares of common stock, and certain other customary conditions, including the absence of laws or judgments prohibiting or restraining the Merger. Failure to complete the Merger could adversely affect the price of our common stock. We will have incurred significant costs, including the diversion of management resources, for which we will have received little or no benefit. The Merger Agreement contains certain other termination rights for both us and Reliance, and further provides that, upon termination of the Merger Agreement under specified circumstances, we may be obligated to pay Reliance a termination fee. A failed transaction may result in negative publicity and a negative impression of us in the investment community. The occurrence of any of these events individually or in combination could have a material adverse effect on our results of operations and our stock price.

Risks Related to Business and Financial Structure

The following discussion of risks are qualified in their entirety by impact that the potential acquisition by Reliance may have on our existing business and financial structure.

Our business, financial condition, results of operations and cash flows are heavily affected by changing metal prices.

Metal costs typically represent approximately 75% of our net sales. Metal costs can be volatile due to numerous factors beyond our control, including domestic and international economic conditions, labor costs, production levels, competition, import duties and tariffs and currency exchange rates. This volatility can significantly affect the availability and cost of raw materials for us and may, therefore, adversely affect our net sales, operating margin and net income. Our metal service centers maintain substantial inventories of metal to accommodate the short lead-times and just-in-time delivery requirements of our customers. Accordingly, using information derived from customers, market conditions, historic usage and industry research, we purchase metal in an effort to maintain our inventory at levels that we believe to be appropriate to satisfy the anticipated needs of our customers. Our commitments for metal purchases are generally at prevailing market prices in effect at the time we place our orders. We have no substantial long-term, fixed-price purchase contracts. When raw material prices rise, we may not be able to pass the price increase on to our customers. When raw material prices decline, customer demands for lower prices could result in lower sale prices and, to the extent we reduce existing inventory quantities, lower margins. There have been historical periods of rapid and significant movements in the prices of metal both upward and downward. These changes can make it difficult for us to accurately forecast our results, which could cause us to have higher or lower levels of inventory than required or make expenditures that may not generate expected returns. Any limitation on our ability to pass through any price increases to our customers could have a material adverse effect on our business, financial condition, results of operations or cash flows.

Our operating results and liquidity could be negatively affected during economic downturns because the demand for our products is cyclical.

Many of our products are used in businesses that are, to varying degrees, cyclical and have historically experienced periodic downturns due to economic conditions, energy prices, consumer demand and other factors beyond our control. These economic and industry downturns have been characterized by diminished product demand, excess capacity and, in some cases, lower average selling prices for our products. Economic downturns and uncertainty about current global economic conditions pose risks as businesses in one or more of the markets that we serve, or consumers in one or more of the end-use markets that our customers serve, may postpone purchases in response to tighter credit, negative financial news and/or declines in asset values, which could have a material adverse effect on the demand for our products and services and on our financial condition, results of operations or cash flows. Additionally, as an increasing amount of our customers relocate their manufacturing facilities outside of the United States, we may not be able to maintain our level of sales to those customers.

The decline in steel prices resulting from weakened demand and an oversupply of steel throughout the supply chain during the latter half of 2008 and first half of 2009 contributed to a significant decline in steel product shipments from metals service centers in the United States. Reduced demand in a number of our markets combined with the foreign relocation of some of our customers could have an adverse effect on our business, financial condition, results of operations or cash flows.

Our customers sell their products abroad, and some of our suppliers buy feedstock abroad. As a result, our business is affected by general economic conditions and other factors outside the United States, primarily in Europe and Asia. Our suppliers’ access to metal, and therefore our access to metal, is additionally affected by such conditions and factors. Similarly, the demand for our customers’ products, and therefore our products, is affected by such conditions and factors. These conditions and factors include enhanced imbalances in the world’s iron ore, coal and steel industries, a downturn in world economies, increases in interest rates, unfavorable currency fluctuations or a slowdown in the key industries served by our customers. In addition, demand for the products of our Building Products Group has been adversely affected by the downturn in the U.S. housing market, since the results of that group depend on a strong residential remodeling industry, which in turn has been historically driven by an expansion in the broader housing market and relatively high consumer confidence.

We rely on metal suppliers in our business and purchase a significant amount of metal from a limited number of suppliers and termination of one or more of our relationships with any of them could have a material adverse effect on our business, financial condition, results of operations or cash flows.

We use a variety of metals in our business. Our operations depend upon obtaining adequate supplies of metal on a timely basis. We purchase most of our metal from a limited number of metal suppliers. As of December 31, 2012, our top four metals suppliers represented a significant portion of our total metal purchasing cost. Termination of our relationship with any of these suppliers could have a material adverse effect on our business, financial condition, results of operations or cash flows if we were unable to obtain metal from other sources in a timely manner.

In addition, the domestic metals production industry has experienced consolidation in recent years. Further consolidation could result in a decrease in the number of our major suppliers or a decrease in the number of alternative supply sources available to us, which could make it more likely that termination of one or more of our relationships with major suppliers would result in a material adverse effect on our business, financial condition, results of operations or cash flows. Consolidation could also result in price increases for the metal that we purchase. Such price increases could have a material adverse effect on our business, financial condition, results of operations or cash flows if we were not able to pass these price increases on to our customers.

Intense competition in our fragmented industry could adversely affect our profitability.

We are engaged in a highly fragmented and competitive industry. We compete with a large number of other value-added oriented metal processors/metal service centers on a regional and local basis, some of which may have greater financial resources than we have. Service centers compete with each other on price, service, quality and availability of products. According to Metal Center

News, Metals USA is ranked number eight among service centers in North America based on 2011 revenues. We also compete, to a much lesser extent, with primary metals producers, who typically sell to very large customers requiring regular shipments of large volumes of metals. Because price, particularly in the ferrous flat rolled business, is a competitive factor, we may be required in the future to reduce sales volumes to maintain our level of profitability. Increased competition in any of our businesses could have a material adverse effect on our business, financial condition, results of operations or cash flows.

Our ability to retain our key employees is critical to the success of our business, and failure to do so may adversely affect our revenues and as a result could materially adversely affect our business, financial condition, results of operations and cash flows.

We are dependent on the services of certain members of our senior management team to remain competitive in our industry. We may not be able to retain or replace one or more of these key employees, we may suffer an extended interruption in one or more of their services or we may lose the services of one or more of these key employees entirely. Our current key employees are subject to employment conditions or arrangements that permit the employees to terminate their employment without notice. We do not maintain any life insurance policies for our key employees. If any of our key employees were not able to dedicate adequate time to our business, due to personal or other factors, if we lose or suffer an extended interruption in the services of any of our key employees or if any of our key employees were to terminate their employment it could have a material adverse effect on our business, financial condition, results of operations or cash flows. In addition, the market for qualified individuals may be highly competitive and we may not be able to attract and retain qualified personnel to replace or succeed members of our senior management or other key employees, should the need arise.

From time to time, there are shortages of qualified operators of metals processing equipment. In addition, during periods of low unemployment, turnover among less-skilled workers can be relatively high. Any failure to retain a sufficient number of such employees in the future could have a material adverse effect on our business, financial condition, results of operations or cash flows.

We are subject to litigation that could strain our resources and distract management.

From time to time, we are involved in a variety of claims, lawsuits and other disputes arising in the ordinary course of business. These suits concern issues including product liability, contract disputes, employee-related matters and personal injury matters. It is not feasible to predict the outcome of all pending suits and claims, and the ultimate resolution of these matters as well as future lawsuits could have a material adverse effect on our business, financial condition, results of operations or cash flows or reputation.

Environmental costs could decrease our net cash flow and adversely affect our profitability.

Our operations are subject to extensive regulations governing waste disposal, air and water emissions, the handling of hazardous substances, remediation, workplace exposure and other environmental matters. Some of the properties we own or lease are located in areas with a history of heavy industrial use, and are near sites listed for clean up under CERCLA. CERCLA established joint and several responsibility for clean-up without regard to fault for persons who have arranged for disposal of hazardous substances at sites that have become contaminated and for persons who own or operate contaminated facilities. We have a number of properties located in or near industrial or light industrial use areas; accordingly, these properties may have been contaminated by pollutants which would have migrated from neighboring facilities or have been deposited by prior occupants. Some of our properties are affected by contamination from leaks and drips of cutting oils and similar materials. The costs of clean-ups to date have not been material. It is possible that we could be notified of such claims in the future. It is also possible that we could be identified by the Environmental Protection Agency, a state agency or one or more third parties as a potentially responsible party under CERCLA or under analogous state laws. If so, we could incur substantial costs related to such claims, which could decrease our net cash flows and adversely affect our profitability. For more information, see “Business—Government Regulation and Environmental Matters.”

Adverse developments in our relationship with our unionized employees could adversely affect our business.

As of December 31, 2012, approximately 180 of our employees (approximately 7%) at various sites were members of unions. We are currently a party to seven collective-bargaining agreements. Six expire in 2013 and one expires in 2014. Presently we do not anticipate any problems or issues with respect to renewing these agreements upon acceptable terms. However, no assurances can be given that we will succeed in negotiating new collective-bargaining agreements to replace the expiring ones without a strike. Any strikes in the future could have a material adverse effect on our business, financial condition, results of operations or cash flows. See “Business—Employees” for a discussion of our previous negotiations of collective-bargaining agreements.

Our ability to pursue our historical acquisition strategy is restricted by the terms of the Merger Agreement with Reliance. To the extent we continue to pursue our acquisition strategy, we may not successfully implement our strategy, and acquisitions that we pursue may present unforeseen integration obstacles and costs, increase our leverage and negatively impact our performance.

The Merger Agreement with Reliance contains operating covenants that restrict our ability to engage in acquisitions. However, if the Merger with Reliance is not completed, we expect to continue to pursue acquisitions. Historically, we generally have targeted one to two “bolt-on” acquisitions per year to enhance our metal service center strategy. To the extent we continue to pursue acquisitions in the future, we may not be able to identify suitable acquisition candidates, and if we do identify suitable candidates, they

may be larger than our historical targets. The expense incurred in consummating acquisitions of related businesses, or our failure to integrate such businesses successfully into our existing businesses, could affect our growth or result in our incurring unanticipated expenses and losses. Furthermore, we may not be able to realize any anticipated benefits from acquisitions. To finance an acquisition, we may incur debt or issue equity, both of which could be materially greater amounts than in connection with prior acquisitions. The process of integrating acquired operations into our existing operations may result in unforeseen operating difficulties and may require significant financial resources that would otherwise be available for the ongoing development or expansion of existing operations. Some of the risks associated with our historical acquisition strategy which could have an adverse effect on our business, financial condition, results of operations and cash flows, include:

•

potential disruption of our ongoing business and distraction of management;

•

unexpected loss of key employees or customers of the acquired company;

•

conforming the acquired company’s standards, processes, procedures and controls with our operations;

•

coordinating new product and process development;

•

hiring additional management and other critical personnel;

•

encountering unknown contingent liabilities that could be material; and

•

increasing the scope, geographic diversity and complexity of our operations.

As a result of the foregoing, to the extent we pursue our historical acquisition strategy, our strategy may not be successfully received by customers, and we may not realize any anticipated benefits from acquisitions.

Metals USA Holdings is a holding company and relies on dividends and other payments, advances and transfers of funds from its subsidiaries to meet its dividend and other obligations.

Metals USA Holdings has no direct operations and derives all of its cash flow from its subsidiaries. Because Metals USA Holdings conducts its operations through its subsidiaries, Metals USA Holdings depends on those entities for dividends and other payments to generate the funds necessary to meet its financial obligations, and to pay any dividends with respect to our common stock. Legal and contractual restrictions in the ABL facility, the agreement governing Metals USA’s Senior Secured Term Loan Due 2019 (the “Term Loan”) (the “Term Loan Agreement”) and other agreements governing current and future indebtedness of Metals USA Holdings’ subsidiaries, as well as the financial condition and operating requirements of Metals USA Holdings’ subsidiaries, currently limit and may, in the future, limit Metals USA Holdings’ ability to obtain cash from its subsidiaries. The earnings from, or other available assets of, Metals USA Holdings’ subsidiaries may not be sufficient to pay dividends or make distributions or loans to enable Metals USA Holdings to pay any dividends on our common stock.

We may not be able to retain or expand our customer base if the North American manufacturing industry continues to erode through moving offshore or through acquisition and merger or consolidation activity in our customers’ industries.

Our customer base, including our Flat Rolled and Non-Ferrous Group’s customer base, primarily includes manufacturing and industrial firms. Some of these customers operate in industries that are undergoing consolidation through acquisition and merger activity; some are considering or have considered relocating production operations overseas or outsourcing particular functions overseas; and some customers have closed as they were unable to compete successfully with overseas competitors. Our facilities are predominately located in the mid-western and southern United States. To the extent that these customers cease U.S. operations, relocate or move operations overseas to regions in which we do not have a presence, we could lose their business. In addition, acquirers of manufacturing and industrial firms may have suppliers of choice that do not include us, which could affect our customer base and sales.

We may face product liability claims that are costly and create adverse publicity.

If any of the products that we sell cause harm to any of our customers, we could be exposed to product liability lawsuits. If we were found liable under product liability claims, we could be required to pay substantial monetary damages. Further, even if we successfully defended ourselves against this type of claim, we could be forced to spend a substantial amount of money in litigation expenses, our management could be required to spend valuable time to defend against these claims and our reputation could suffer, any of which could harm our business.

We may not be able to generate sufficient cash to service all of our indebtedness.

Our ability to make payments on our indebtedness depends on our ability to generate cash in the future. The Term Loan, the ABL facility and our other outstanding indebtedness accounted for significant cash interest expenses in fiscal 2012 and the same is expected in subsequent years. Accordingly, we will have to generate significant cash flows from operations to meet our debt service requirements. If we do not generate sufficient cash flow to meet our debt service and working capital requirements, we may need to seek additional financing; however, this insufficient cash flow may make it more difficult for us to obtain financing on terms that are acceptable to us, or at all. Furthermore, Apollo has no obligation to provide us with debt or equity financing and we therefore may be unable to generate sufficient cash to service all of our indebtedness.

Our use of leverage exposes us to interest rate risk and could adversely affect our ability to raise additional capital to fund our operations, limit our ability to react to changes in the economy or our industry and prevent us from meeting our obligations under our indebtedness.

As of December 31, 2012, our total indebtedness was $451.6 million. We also had an additional $194.3 million available for borrowing under the ABL facility as of that date.

Our indebtedness could have important consequences for you, including:

•

it may limit, along with the financial and other restrictive covenants in our indebtedness, among other things, our ability to borrow money, dispose of assets or sell equity for our working capital, capital expenditures, dividend payments, debt service requirements, strategic initiatives or other purposes;

•

it may limit our flexibility in planning for, or reacting to, changes in our operations or business;

•

we may be more highly leveraged than some of our competitors, which may place us at a competitive disadvantage;

•

it may make us more vulnerable to downturns in our business or the economy; and

•

there would be a material adverse effect on our business, financial condition, results of operations or cash flows if we were unable to service our indebtedness or obtain additional financing, as needed.

Our debt agreements impose significant operating and financial restrictions, which could have a material adverse effect on our business, financial condition, results of operations or cash flows.

The ABL facility and the Term Loan Agreement contain various covenants that limit or prohibit our ability, among other things, to:

•

incur or guarantee additional indebtedness or issue certain preferred shares;

•

pay dividends on our capital stock or redeem, repurchase, retire or make distributions in respect of our capital stock or subordinated indebtedness or make other restricted payments;

•

enter into or permit certain agreements or make certain investments or loans;

•

sell certain assets;

•

create or incur liens; and

•

enter into certain transactions with our affiliates.

Among other exceptions to these covenants, the Term Loan Agreement includes a $15.0 million annual dividend basket in order to permit the distribution of funds by Flag Intermediate and Metals USA to Metals USA Holdings for the payment of the Company’s previously announced regular quarterly dividend on the Company’s common stock, subject to declaration by the Company’s Board of Directors.

As of December 31, 2012, our fixed charge coverage ratio (“FCCR”), as defined by the loan and security agreement governing the ABL facility, was 2.44. As of December 31, 2012 we had $194.3 million of additional borrowing capacity under the ABL facility. Failure to comply with the FCCR covenant of the ABL facility can result in limiting our long-term growth prospects by hindering our ability to incur future indebtedness or grow through acquisitions. We do not have to maintain a minimum FCCR as long as our borrowing availability under the ABL facility is greater than or equal to the greater of (i) $45.0 million and (ii) 10% of the lesser of the borrowing base and the aggregate commitment (the “Minimum Availability”). We must maintain an FCCR of at least 1.0 to 1.0 if borrowing availability falls below the Minimum Availability.

Our inability to satisfy the terms of the negative covenants in our debt agreements do not, by themselves, constitute covenant violations or events of default. Rather, they are event-related restrictions that limit or prohibit the Company from taking certain corporate actions. For more information, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources—Covenant Compliance.”

The restrictions contained in the agreements that govern the terms of our debt could:

•

limit our ability to plan for or react to market conditions or meet capital needs or otherwise restrict our activities or business plans;

•

adversely affect our ability to finance our operations, to enter into strategic acquisitions, investments or other capital needs or to engage in other business activities that would be in our interest; and

•

limit our access to the cash generated by our subsidiaries.

Upon the occurrence of an event of default under the ABL facility, the lenders could elect to declare all amounts outstanding under the ABL facility to be immediately due and payable and terminate all commitments to extend further credit. If we were unable to repay those amounts, the lenders under the ABL facility could proceed against the collateral granted to them to secure the ABL facility on a first-priority lien basis. If the lenders under the ABL facility accelerate the repayment of borrowings, such acceleration could have a material adverse effect on our business, financial condition, results of operations or cash flows. In addition, we may not have sufficient assets to repay the Term Loan upon acceleration.

For a more detailed description on the limitations on our ability to incur additional indebtedness, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Financing Activities.”

Despite our current indebtedness, we may still be able to incur significantly more indebtedness which could have a material adverse effect on our business, financial condition or results of operations.

The terms of the Term Loan Agreement and the ABL facility contain restrictions on our ability to incur additional indebtedness. These restrictions are subject to a number of important qualifications and exceptions, and the indebtedness incurred in compliance with these restrictions could be substantial. Accordingly, we or our subsidiaries could incur significant additional indebtedness in the future. As of December 31, 2012, we had approximately $194.3 million available for additional borrowing under the ABL facility, including the subfacility for letters of credit, and the covenants under our debt agreements would allow us to borrow a significant amount of additional indebtedness. Additional leverage could have a material adverse effect on our business, financial condition or results of operations and could increase the risks described in “—Our use of leverage exposes us to interest rate risk and could adversely affect our ability to raise additional capital to fund our operations, limit our ability to react to changes in the economy or our industry and prevent us from meeting our obligations under our indebtedness,” “—Our debt agreements impose significant operating and financial restrictions, which could have a material adverse effect on our business, financial condition, results of operations or cash flows” and “—Because a portion of our indebtedness bears interest at rates that fluctuate with changes in certain prevailing short-term interest rates, we are vulnerable to interest rate increases.”

Because a portion of our indebtedness bears interest at rates that fluctuate with changes in certain prevailing short-term interest rates, we are vulnerable to interest rate increases.

Our indebtedness bears interest at rates that fluctuate with changes in certain short-term prevailing interest rates. As of December 31, 2012, we had approximately $451.3 million of floating rate debt under the ABL facility, the Term Loan and our Industrial Revenue Bonds (“IRBs”). We also had an additional $194.3 million available for borrowing under the ABL facility as of December 31, 2012. Assuming a consistent level of debt, a 100 basis point change in the interest rate on our floating rate debt effective from the beginning of the year would increase or decrease our fiscal 2012 interest expense under the ABL facility and the IRBs by approximately $4.5 million. We use derivative financial instruments to manage a portion of the potential impact of our interest rate risk. As of December 31, 2012, we had $3.9 million of IRBs that were hedged under interest rate swap agreements. To some extent, derivative financial instruments can protect against increases in interest rates, but they do not provide complete protection over the longer term. If interest rates increase dramatically, we could be unable to service our debt which could have a material adverse effect on our business, financial condition, results of operations or cash flows.

We are presently controlled by Apollo and its affiliates, and their interests as equity holders may conflict with yours.

We are an affiliate of, and are controlled by, Apollo and its affiliates. The interests of Apollo and its affiliates may not always be aligned with yours. For example, Apollo may have an interest in pursuing acquisitions, divestitures, financings or other transactions that, in their judgment, could enhance their equity investment, even though these transactions might involve risks to the non-affiliated holders of our common stock or holders of our debt if the transactions resulted in our being more highly leveraged or significantly changed the nature of our business operations or strategy. In addition, if we encounter financial difficulties, or if we are unable to pay our debts as they mature, the interests of Apollo might conflict with those of the non-affiliated holders of our common stock or the holders of our debt. In that situation, for example, the non-affiliated holders of our common stock or the holders of our debt might want us to raise additional equity to reduce our leverage and pay our debts, while Apollo might not want to increase their investment in us or have their ownership diluted and instead choose to take other actions, such as selling our assets. Furthermore, Apollo and its affiliates have no continuing obligation to provide us with debt or equity financing. Additionally, Apollo and certain of its affiliates are in the business of making investments in businesses engaged in the metals service industry that complement or directly or indirectly compete with certain portions of our business.

Further, if they pursue such acquisitions in the metals service industry, those acquisition opportunities may not be available to us. So long as Apollo and its affiliates continue to indirectly own a significant amount of our equity, even if such amount is less than 50%, they will continue to be able to strongly influence or effectively control our business decisions.

Item 1B. Unresolved Staff Comments

None.

Item 2. Properties

As of December 31, 2012, we operated 19 metal service centers in the Plates and Shapes Group and 29 metal service centers in the Flat Rolled and Non-Ferrous Group. These facilities use various metals processing and materials handling machinery and equipment. As of the same date, our Building Products Group operated four manufacturing plants where we process metals into various building products and 12 sales centers.

Many of our facilities are capable of being used at higher capacities, if necessary. We believe that our facilities will be adequate for the expected needs of our existing businesses over the next several years. Our metal service center facilities, Building Products sales centers and manufacturing plants, and administrative offices are located and described as follows:

OPERATING FACILITIES AS OF DECEMBER 31, 2012


	Location	Square Footage	Owned/ Leased
*Plates and Shapes Group:*
	Mobile, Alabama	246,000	Owned
	Jacksonville, Florida	60,000	Owned
	Oakwood, Georgia	206,000	Owned
	Waggaman, Louisiana	371,000	Owned
	Baltimore, Maryland	65,000	Leased
	Seekonk, Massachusetts	115,000	Owned
	Columbus, Mississippi	45,000	Owned
	Newark, New Jersey	81,000	Owned
	Greensboro, North Carolina	180,000	Owned
	Canton, Ohio	110,000	Owned
	Enid, Oklahoma	112,000	Owned
	Muskogee, Oklahoma (1)	229,000	Owned
	Tulsa, Oklahoma	553,000	Leased
	Ambridge, Pennsylvania	232,000	Leased
	Langhorne, Pennsylvania	235,000	Leased
	Philadelphia, Pennsylvania	85,000	Owned
	Philadelphia, Pennsylvania	144,000	Leased
	York, Pennsylvania	109,000	Owned
	Cedar Hill, Texas	150,000	Owned

*Flat Rolled and Non-Ferrous Group:*
	Thomasville, Alabama	67,000	Owned
	Anaheim, California	45,000	Leased
	Orange, California	28,000	Leased
	Torrington, Connecticut	70,000	Leased
	Thomasville, Georgia	53,000	Leased
	Madison, Illinois	100,000	Owned
	Northbrook, Illinois	187,000	Owned
	Rockford, Illinois	119,000	Owned
	Rockford, Illinois	41,000	Owned
	Jeffersonville, Indiana	90,000	Owned
	Jeffersonville, Indiana (1)	270,000	Owned
	Jeffersonville, Indiana	40,000	Leased
	Wichita, Kansas	43,000	Leased
	Mansfield, Massachusetts	42,000	Owned
	Walker, Michigan	50,000	Owned
	Plymouth, Minnesota	18,000	Owned


	Location	Square Footage	Owned/ Leased
	Liberty, Missouri	117,000	Leased
	Union, New Jersey	39,000	Leased
	Randleman, North Carolina	154,000	Owned
	Springfield, Ohio	105,000	Owned
	Wooster, Ohio	140,000	Owned
	Tulsa, Oklahoma	130,000	Owned
	Houston, Texas	58,000	Owned
	Katy, Texas	212,000	Owned
	Odessa, Texas	29,000	Owned
	Richardson, Texas	192,000	Owned
	Germantown, Wisconsin	102,000	Owned
	Horicon, Wisconsin	120,000	Leased
	Horicon, Wisconsin	32,000	Leased

*Building Products Group:*
Sales Centers	Birmingham, Alabama	19,000	Leased
	Phoenix, Arizona	111,000	Leased
	Hayward, California	24,000	Leased
	Leesburg, Florida	61,000	Leased
	Pensacola, Florida	48,000	Leased
	Las Vegas, Nevada	42,000	Leased
	Oklahoma City, Oklahoma	40,000	Leased
	Irmo, South Carolina	38,000	Leased
	Nashville, Tennessee	44,000	Leased
	Mesquite, Texas	55,000	Leased
	Weslaco, Texas	21,000	Leased
	Kent, Washington	57,000	Leased
Manufacturing Plants	Brea, California	43,000	Owned
	Buena Park, California	168,000	Leased
	Groveland, Florida	247,000	Leased
	Courtland, Ontario	32,000	Owned

*Administrative Locations:*
Corporate Headquarters	Fort Lauderdale, Florida	11,000	Leased
i-Solutions	Fort Washington, Pennsylvania	4,000	Leased

(1)	These facilities are subject to liens with respect to specific debt obligations, including IRBs.

Item 3. Legal Proceedings

Litigation Relating to the Merger

Putative class action lawsuits challenging the proposed transaction have been filed on behalf of Metals USA Holdings stockholders in Florida state court and federal court. The actions are captioned Edwards v. Metals USA Holdings Corp. et al., No. CACE13003979 (Fla. Cir. Ct. Broward County) and Savior Associates v. Goncalves, et al., No. 0:13-cv-60492 (S.D. Fla.), respectively. The operative complaint in the Edwards action alleges that the directors of Metals USA Holdings breached their fiduciary duties to Metals USA Holdings stockholders by engaging in a flawed sales process, by agreeing to sell Metals USA Holdings for inadequate consideration, and by agreeing to improper deal protection terms in the Merger Agreement. The complaint also contends that the directors of Metals USA Holdings have breached their fiduciary duties by releasing a proxy statement that allegedly contains false and misleading information and omits material facts. In addition, the lawsuit alleges that Metals USA Holdings and Reliance aided and abetted these purported breaches of fiduciary duty. The complaint in the Savior Associates matter alleges that Metals USA Holdings and its directors released a proxy statement that contains false and misleading information and that omits material facts, in violation of state law and federal securities laws. The complaint further alleges that the directors of Metals USA Holdings breached their fiduciary duties to Metals USA Holdings stockholders. The Savior Associates complaint also claims that Apollo Management V, L.P. breached its fiduciary duties to Metals USA Holdings stockholders by, among other things,

allegedly causing Metals USA Holdings to engage in the transaction pursuant to an inadequate process at an unfair price. In addition, the lawsuit alleges that Reliance aided and abetted these purported breaches of fiduciary duty. The lawsuits seek, among other things, an injunction barring the Merger. The defendants believe that the lawsuits are without merit.

Other Litigation

From time to time, we are involved in a variety of claims, lawsuits and other disputes arising in the ordinary course of business. We believe the resolution of these matters and the incurrence of their related costs and expenses should not have a material adverse effect on our consolidated financial position, results of operations, liquidity or cash flows. While it is not feasible to predict the outcome of all pending suits and claims, the ultimate resolution of these matters as well as future lawsuits could have a material adverse effect on our business, financial condition, results of operations, cash flows or reputation.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market for Common Equity

Our common stock, $0.01 par value per share, is traded on the New York Stock Exchange under the ticker symbol “MUSA” and was first traded on April 9, 2010. The following table sets forth on a per share basis the low and high sales prices of our common stock as reported by the NYSE since January 1, 2011 and the cash dividends paid on the Company’s common stock:


	2012
	Dividend		High		Low
First Quarter	$	—	$	14.49	$	11.49
Second Quarter		—	$	15.97	$	13.32
Third Quarter		—	$	17.35	$	13.20
Fourth Quarter		0.06	$	17.58	$	12.58

			2011
			High		Low
First Quarter	$	—	$	16.65	$	13.69
Second Quarter		—	$	17.14	$	13.67
Third Quarter		—	$	16.01	$	8.81
Fourth Quarter		—	$	11.81	$	7.77

On October 22, 2012, our Board of Directors authorized the initiation of a regular annual cash dividend payable on Metals USA Holdings’ common stock, to be declared and paid quarterly. Our Board of Directors also declared our first regular quarterly cash dividend in the amount of $0.06 per share, which was paid on November 27, 2012 to stockholders of record as of the close of business on November 13, 2012. On February 5, 2013, our Board of Directors declared a regular quarterly cash dividend of $0.06 per share. The dividend was paid on March 12, 2013 to stockholders of record as of the close of business on February 26, 2013.

The declaration and payment of any future dividends will be at the discretion of the Board of Directors, subject to the Company’s financial results, cash requirements, and other factors deemed relevant by the Board of Directors. The initiation of this new dividend policy is not a guarantee that a dividend will be declared or paid in any particular period in the future. Under the Merger Agreement, the Company is prohibited from paying dividends, except for regular quarterly dividends not to exceed $0.06 per share per dividend.

As of March 8, 2013, there were 68 record holders of our common stock.

Stock Performance Graph

The following graph compares the performance of the Company’s common stock to the performance of the Standard & Poor’s 500 Index (“S&P 500”), the Russell 3000 Index (“Russell 3000”), and the Company’s peer group that we selected. The graph assumes $100 invested on April 9, 2010 in the common stock of Metals USA Holdings and our peer group, and on March 31, 2010 for the S&P 500 and Russell 3000 (as data for the indexes is only available on a month-end basis). The graph also assumes reinvestment of dividends. The companies included in the industry peer group are: Reliance Steel & Aluminum Co., A.M. Castle & Co. and Olympic Steel Inc. The returns of each member of the peer group are weighted according to that member’s stock market capitalization as of the period measured. The stock price performance shown on the graph below is not necessarily indicative of future performance.

LOGO


	4/9/2010		12/31/2010		12/31/2011		12/31/2012
Metals USA Holdings Corp.	$	100.00	$	79.38	$	58.59	$	91.47
S&P 500	$	100.00	$	109.18	$	111.49	$	129.33
Russell 3000	$	100.00	$	110.37	$	111.50	$	129.80
Peer Group	$	100.00	$	97.20	$	88.53	$	114.01

Equity Compensation Plan Information

The following table sets forth, as of December 31, 2012, the number of shares of our common stock that may be issued upon the exercise of outstanding options issued under equity compensation plans, the weighted average exercise price of those options and the number of shares of common stock remaining available for future issuance under equity compensation plans.


Plan Category	Number of securities to be issued upon exercise of outstanding options, warrants and rights		Weighted-average exercise price of outstanding options, warrants and rights		Number of securities remaining available for future issuance under equity compensation plans
Equity compensation plans approved by security holders		1,399,584	$	9.41		2,171,995
Equity compensation plans not approved by security holders		—		—		—

Total		1,399,584	$	9.41		2,171,995

Item 6. Selected Financial Data

The following table sets forth our selected historical consolidated financial data as of the dates and for the periods indicated. The selected historical consolidated financial data as of December 31, 2012 and 2011 and for the years ended December 31, 2012, 2011 and 2010, have been derived from our audited consolidated financial statements and related notes included in this Form 10-K. The selected historical consolidated financial data as of December 31, 2010, 2009 and 2008, and for the years ended December 31, 2009 and 2008 presented in this table have been derived from the Company’s audited consolidated financial statements not included in this Form 10-K. The historical results set forth below do not necessarily indicate results expected for any future period, and should be read in conjunction with, and are qualified by reference to, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the consolidated financial statements and related notes thereto included elsewhere in this Form 10-K.

On March 19, 2010, the Company’s Board of Directors approved a 1.7431-for-1 split of the Company’s common stock. The split was effected as a stock dividend on April 5, 2010. The Statements of Operations Data as presented below give retroactive effect to the stock split. In addition, the Company’s Board of Directors approved an increase in the Company’s authorized shares of common stock from 30,000,000 to 140,000,000, pursuant to our amended and restated certificate of incorporation. The amended and restated certificate of incorporation also authorizes the issuance of 10,000,000 shares of preferred stock, $0.01 par value per share. Our stockholders approved the amended and restated certificate of incorporation on March 19, 2010.


	Years Ended December 31,
	2008			2009			2010		2011		2012
	(in millions, except per share amounts)
Statements of Operations Data:
Net Sales	$	2,156.2		$	1,098.7		$	1,292.1	$	1,885.9	$	1,983.6
Cost of sales (exclusive of operating and delivery, and depreciation and amortization included in operating expenses below)		1,612.9			890.1			996.7		1,445.7		1,530.4
Operating expenses		336.9			230.7			235.2		305.0		335.2


Operating income (loss)		206.4			(22.1	)		60.2		135.2		118.0
Interest expense		87.9			63.5			38.9		36.6		36.3
Loss (gain) on extinguishment of debt		—			(92.1	)		3.5		—		6.3
Other (income) expense, net		(0.2	)		0.2			—		0.1		(0.1	)


Income before income taxes		118.7			6.3			17.8		98.5		75.5
Provision for income taxes		46.1			2.8			6.3		33.9		22.8


Net income	$	72.6		$	3.5		$	11.5	$	64.6	$	52.7


Income per share:
Income per share—basic	$	2.96		$	0.14		$	0.34	$	1.74	$	1.42
Income per share—diluted	$	2.87		$	0.14		$	0.34	$	1.73	$	1.41
Cash dividends per common share	$	—		$	—		$	—	$	—	$	0.06
Number of common shares used in the per share calculations:
Basic		24.5			24.6			33.8		37.0		37.1
Diluted		25.3			24.6			34.1		37.3		37.4


	As of December 31,
	2008			2009			2010		2011		2012
	(in millions)
Balance Sheet Data:
Working capital	$	699.0		$	279.1		$	380.2	$	503.4	$	525.8
Total assets		1,088.2			627.8			745.5		984.8		1,003.9
Long-term debt, less current portion		942.6			468.2			345.4		467.6		448.8
Stockholders’ equity (deficit)		(51.0	)		(43.7	)		191.1		257.1		310.2

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

This section contains statements that constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. See disclosure presented on page 2 of this report for cautionary information with respect to such forward-looking statements. Readers should refer to Item 1A. “Risk Factors” for risk factors that may affect future performance. The following discussion should be read in conjunction with Item 6. “Selected Financial Data” and Item 8. “Financial Statements and Supplementary Data.”

Overview

All references to the “Company” include Metals USA Holdings, Flag Intermediate, its wholly-owned subsidiary Metals USA, and the wholly owned subsidiaries of Metals USA.

We believe that we are a leading provider of value-added processed carbon steel, stainless steel, aluminum and specialty metals, as well as manufactured metal components. For the year ended December 31, 2012, approximately 96% of our revenue was derived from our metals service center and processing activities, which are segmented into two groups: Flat Rolled and Non-Ferrous Group and Plates and Shapes Group. The remaining portion of our revenue was derived from our Building Products Group, which principally manufactures and sells roofing and aluminum patio products related to the residential remodeling industry. We purchase metal from primary producers that generally focus on large volume sales of unprocessed metals in standard configurations and sizes. In most cases, we perform the customized, value-added processing services required to meet the specifications provided by end-use customers. Our Plates and Shapes Group and Flat Rolled and Non-Ferrous Group customers are in the aerospace, automotive industry manufacturing, defense, heavy equipment, marine transportation, commercial construction, office furniture manufacturing, and energy and oilfield services industries. Our Building Products Group customers are primarily distributors and contractors engaged in the residential remodeling industry.

Proposed Acquisition by Reliance

On February 6, 2013, Metals USA Holdings, Reliance and Merger Sub entered into the Merger Agreement, under which Reliance has agreed to acquire Metals USA Holdings. Pursuant to the Merger Agreement, and subject to the satisfaction or waiver of the conditions therein, Merger Sub will be merged with and into Metals USA Holdings, with Metals USA Holdings surviving as a wholly-owned subsidiary of Reliance. At the effective time of the Merger, each outstanding share of Metals USA Holdings common stock (other than dissenting shares, treasury shares, shares owned by Reliance and its subsidiaries and shares owned by any subsidiary of Metals USA Holdings) will be cancelled and converted into the right to receive $20.65 in cash, without interest. The parties’ obligations to complete the Merger are conditioned upon customary closing conditions, including the approval of the Merger and the adoption of the Merger Agreement by the holders of a majority of the outstanding shares of Metals USA Holdings common stock. The Merger is not conditioned upon Reliance’s receipt of financing. The Merger Agreement contains customary representations, warranties and covenants by each of Reliance and Metals USA Holdings.

Industry Trends

Metals Service Centers

According to data from the Metals Service Center Institute (“MSCI”), year-to-date actual shipments for the U.S. service center industry through December 2012 were up 1.8% over the same period of 2011. Inventories at December 31, 2012 increased 2.4% over the December 2011 levels. December MSCI data showed an increase in the months supply on hand to 3.1 as of December 31, 2012 from 2.8 as of December 31, 2011.

Service center companies compete on level and depth of service (value-added processing capabilities, size and shape offerings, speed of delivery, etc.), product offerings, relative cost position within the industry and price. We believe the potential synergies from a larger distribution network further enhance the earnings power of the service center business model.

For the year ended December 31, 2012, our shipping volumes increased approximately 11% compared to the year ended December 31, 2011. We believe that we were able to expand market share and reach in 2012 based on stable operating performance and a strong customer base, with all end markets showing moderate growth with the exception of non-residential construction. At the same time, our cost structure is highly variable, which we believe allows the Company to generate profitability in most economic climates. Our business objective is to build a sustainable competitive advantage that improves competitive strength and long-term market position through creating customer value. We believe our growth in market share in 2012 is evidence of sustainable competitive advantage.

Our view for 2013 assumes gradual cyclical recovery continues and non-residential construction markets follow an historic lagging progression versus residential housing markets, which are showing renewed growth trends. We believe these trends will produce incremental volume for the Company in 2013. We believe that macroeconomic and industry data such as industrial production, durable goods orders, and service center activity points to a relatively stable price environment. Going into 2013, we believe the Company’s metal service center business is well positioned to continue to benefit from economic recovery.

Building Products

The downturn in the housing and mortgage markets has caused significant contraction in the home improvement remodeling industry. While the pace of the decline in homeowner remodeling projects appears to be moderating, increased remodeling activity does not seem likely to materialize until further signs of recovery emerge in the broader housing market. Although lower financing costs are reducing the cost of financing home improvement projects, weak home prices and decreased cost recovery for many types of remodeling projects continue to discourage upper-end remodeling improvements.

Product demand for the Company’s Building Products Group may be influenced by numerous factors such as general economic conditions, consumer confidence, housing prices, existing home sales, interest rates and homeowner lending. The absence of a sustained recovery in any of these factors could continue to limit growth for our Building Products segment.

Consolidated Results of Operations

The following financial information reflects our historical financial statements.


	Fiscal Years Ended December 31,
	2012			%			2011		%			2010		%
	(in millions, except percentages)
Net sales	$	1,983.6			100.0	%	$	1,885.9		100.0	%	$	1,292.1		100.0	%
Cost of sales (exclusive of operating and delivery, and depreciation and amortization shown below)		1,530.4			77.2	%		1,445.7		76.7	%		996.7		77.1	%
Operating and delivery		199.3			10.0	%		175.7		9.3	%		131.9		10.2	%
Selling, general and administrative		113.4			5.7	%		108.1		5.7	%		81.9		6.3	%
Depreciation and amortization		22.7			1.1	%		21.2		1.1	%		17.8		1.4	%
(Gain) loss on sale of property and equipment		(0.2	)		0.0	%		—		—			0.3		0.0	%
Advisory agreement termination charge		—			—			—		—			3.3		0.3	%

Operating income		118.0			5.9	%		135.2		7.2	%		60.2		4.7	%
Interest expense		36.3			1.8	%		36.6		1.9	%		38.9		3.0	%
Loss on debt extinguishment		6.3			0.3	%		—		—			3.5		0.3	%
Other (income) expense, net		(0.1	)		0.0	%		0.1		0.0	%		—		—

Income before income taxes		75.5			3.8	%		98.5		5.2	%		17.8		1.4	%
Provision for income taxes		22.8			1.1	%		33.9		1.8	%		6.3		0.5	%

Net income	$	52.7			2.7	%	$	64.6		3.4	%	$	11.5		0.9	%

Results of Operations—Year Ended December 31, 2012 Compared to 2011

Net sales. Net sales increased $97.7 million, or 5.2%, from $1,885.9 million for the year ended December 31, 2011 to $1,983.6 million for the year ended December 31, 2012. The increase was primarily attributable to an 11.0% increase in shipments, partially offset by a 4.9% decrease in average realized prices for our Flat Rolled and Non-Ferrous and Plates and Shapes Groups. Net sales for our Building Products Group decreased $3.0 million, or 3.5%, for the year ended December 31, 2012 compared to the same period of 2011. Results for the year ended December 31, 2012 include operating results from the Gregor acquisition, which closed on March 12, 2012. In addition, results for the year ended December 31, 2012 include a full year of operating results from the Trident acquisition, which closed on March 11, 2011. Gregor and Trident contributed a combined $47.1 million of incremental sales for the year ended December 31, 2012. Excluding Gregor from our 2012 results and Trident from both 2011 and 2012 results, net sales increased $35.0 million, or 2.1%, for the year ended December 31, 2012 compared to the same period of 2011, which primarily resulted from an 10.8% increase in shipments partially offset by a 6.9% decrease in average realized prices.

Demand for our metal products and processing services grew modestly in 2012 compared to 2011, as we experienced continued improvement in several of the end market segments we serve. Our metal service centers benefitted from steady expansion of manufacturing and industrial production, while there were also indications that the long-depressed non-residential construction segment may be moving toward recovery. We expect these trends to continue in 2013 although there are risks and uncertainties that could affect the performance of the U.S. economy.

Cost of sales. Cost of sales increased $84.7 million, or 5.9%, from $1,445.7 million for the year ended December 31, 2011 to $1,530.4 million for the year ended December 31, 2012. The increase was primarily attributable to an 11.0% increase in shipments for our Flat Rolled and Non-Ferrous and Plates and Shapes Groups, partially offset by a 4.2% decrease in average cost per ton. Cost of sales for our Building Products Group decreased $3.7 million, or 5.9%. The Gregor and Trident acquisitions added a combined $30.8 million of incremental cost of sales for the year ended December 31, 2012. Excluding Gregor from our 2012 results and Trident from both 2011 and 2012 results, shipments increased 10.8% and average cost per ton decreased 5.7% over 2011. The increase in

volumes that contributed to higher cost of sales during 2012 was primarily attributable to the factors that affected the increase in net sales discussed above. Cost of sales as a percentage of net sales increased from 76.7% for the year ended December 31, 2011 to 77.2% for the year ended December 31, 2012.

Operating and delivery. Operating and delivery expenses increased $23.6 million, or 13.4%, from $175.7 million for the year ended December 31, 2011 to $199.3 million for the year ended December 31, 2012. The increase was a result of higher variable costs associated with increased shipments, most notably higher labor costs of approximately $10.9 million and higher freight costs of approximately $3.5 million. The increase in shipments is attributable to growth in general line metal distribution, acquisitions, and value-added metal processing services. Gregor and Trident added a combined $11.7 million of incremental operating and delivery expenses for the year ended December 31, 2012. As a percentage of net sales, operating and delivery expenses increased from 9.3% for the year ended December 31, 2011 to 10.0% for the year ended December 31, 2012.

Selling, general and administrative. Selling, general and administrative expenses increased $5.3 million, or 4.9%, from $108.1 million for the year ended December 31, 2011 to $113.4 million for the year ended December 31, 2012. Higher professional fees contributed approximately $1.2 million to the increase during 2012. We incurred costs of approximately $0.8 million during 2012 in connection with the secondary offering of 4.0 million shares of our common stock by Apollo. We also incurred costs of $0.7 million which were primarily attributable to the Gregor acquisition, which closed in March 2012. The Gregor and Trident acquisitions added a combined $3.7 million of incremental selling, general and administrative expenses for 2012. As a percentage of net sales, selling, general and administrative expenses remained level at 5.7% for the year ended December 31, 2012 as compared to the year ended December 31, 2011.

Depreciation and amortization. Depreciation and amortization expense increased $1.5 million, or 7.1%, from $21.2 million for the year ended December 31, 2011 to $22.7 million for the year ended December 31, 2012. The increase was primarily due to higher amortization of acquired intangible assets associated with our recent acquisitions, and to a lesser extent to the increase in our fixed asset base from our growth through acquisitions and from increased capital spending, partially offset by the aging of existing equipment and lower depreciation associated with the in-place fixed asset base. Net intangible assets as of December 31, 2012 were $30.1 million compared to $26.6 million as of December 31, 2011. Net property and equipment as of December 31, 2012 was $251.8 million compared to $247.8 million as of December 31, 2011. As a percentage of net sales, depreciation and amortization expense was 1.1% for the years ended December 31, 2012 and 2011.

Operating income. Operating income decreased $17.2 million, or 12.7%, from $135.2 million for the year ended December 31, 2011 to $118.0 million for the year ended December 31, 2012. The decrease was primarily a result of the increase in variable operating costs that have accompanied stronger sales volumes, in addition to lower average selling prices. As a percentage of net sales, operating income decreased from 7.2% for the year ended December 31, 2011 to 5.9% for the year ended December 31, 2012.

Interest expense. Interest expense was $36.3 million for the year ended December 31, 2012, an amount that was roughly equivalent to the $36.6 million of interest expense for the year ended December 31, 2011. Although the weighted average outstanding balance on our ABL facility increased from $214.8 million for the year ended December 31, 2011 to $246.8 million for the year ended December 31, 2012, the weighted average facility rate decreased from 2.77% to 2.45% between the two periods. Borrowings under the ABL facility were used to fund the Gregor acquisition, in addition to higher working capital needs between the two periods.

Income taxes. Income tax expense for the year ended December 31, 2012 was $22.8 million, resulting in an overall effective tax rate of 30.2%, compared to income tax expense of $33.9 million and an overall effective tax rate of 34.4% for the year ended December 31, 2011. The decrease in the tax rate in 2012 is primarily due to the impact of state taxes, permanent items, and the resolution of uncertain tax positions, including those resolved due to the lapsing of statutes of limitation, on the respective levels of pre-tax book income.

Net income. Net income decreased from $64.6 million for the year ended December 31, 2011 to $52.7 million for the year ended December 31, 2012. The decrease was primarily due to the factors that affected the decrease in operating income discussed above. In addition, we incurred approximately $6.3 million of pre-tax expense on debt extinguishment during the fourth quarter of 2012 in connection with the redemption of our 11 1/8% Senior Secured Notes due 2015 (the “Metals USA Notes”). The decrease in net income for 2012 compared to 2011 was partially offset by the impact of lower income tax expense for the year ended December 31, 2012 compared to the same period of 2011.

Results of Operations—Year Ended December 31, 2011 Compared to 2010

Net sales. Net sales increased $593.8 million, or 46.0%, from $1,292.1 million for the year ended December 31, 2010 to $1,885.9 million for the year ended December 31, 2011. The increase was primarily attributable to a 31.8% increase in shipments, in addition to a 12.9% increase in average realized prices for our Flat Rolled and Non-Ferrous and Plates and Shapes Product Groups. Net sales for our Building Products Group increased $2.8 million, or 3.4%, for the year ended December 31, 2011 compared to the same period of 2010. Results for the year ended December 31, 2011 include operating results from the Trident acquisition, which closed on March 11, 2011, and the ORMS acquisition, which closed on December 31, 2010. In addition, results for the year ended December 31, 2011 include a full twelve months of operating results from the J. Rubin acquisition, which closed on June 28, 2010.

Trident, ORMS and J. Rubin contributed a combined $194.7 million of incremental sales for the year ended December 31, 2011. Excluding the Trident, ORMS and J. Rubin acquisitions, net sales for our metal service center businesses increased $396.3 million, or 33.3%, for the year ended December 31, 2011 versus the same period of 2010, which primarily resulted from a 16.7% increase in shipments and a 14.2% increase in average realized prices. The increase in prices and volumes is attributable to the cyclical nature of the metal consuming industries supported by our products and services. The economic recovery that continued through 2011 translated into increased metal consumption as industrial production gradually expanded.

According to data from the MSCI, actual shipments for the service center industry for the year ended December 31, 2011 increased 14.2% over the same period of 2010. Inventory levels remained relatively stable throughout 2011. Business conditions were generally favorable for the year ended December 31, 2011 compared to the same period of 2010.

Cost of sales. Cost of sales increased $449.0 million, or 45.0%, from $996.7 million for the year ended December 31, 2010 to $1,445.7 million for the year ended December 31, 2011. The increase was primarily attributable to a 31.8% increase in shipments for our Flat Rolled and Non-Ferrous and Plates and Shapes Product Groups, in addition to an 11.8% increase in average cost per ton. Cost of sales for our Building Products Group increased $4.2 million, or 7.2%. The Trident, ORMS and J. Rubin acquisitions added a combined $144.2 million of incremental cost of sales for the year ended December 31, 2011. Excluding the Trident, ORMS and J. Rubin acquisitions, shipments increased 16.7% and average cost per ton increased 13.5% over the same period of 2010. The increase in volumes that contributed to higher cost of sales during 2011 was primarily attributable to the factors that affected the increase in net sales discussed above. Cost of sales as a percentage of net sales decreased from 77.1% for the year ended December 31, 2010 to 76.7% for the same period of 2011.

Operating and delivery. Operating and delivery expenses increased $43.8 million, or 33.2%, from $131.9 million for the year ended December 31, 2010 to $175.7 million for the year ended December 31, 2011. The increase was a result of higher variable costs associated with increased shipments, most notably higher labor costs of approximately $5.7 million and higher freight costs of approximately $8.5 million. In addition, Trident, ORMS and J. Rubin added a combined $21.2 million of incremental operating and delivery expenses for the year ended December 31, 2011. As a percentage of net sales, operating and delivery expenses decreased from 10.2% for the year ended December 31, 2010 to 9.3% for the year ended December 31, 2011.

Selling, general and administrative. Selling, general and administrative expenses increased $26.2 million, or 32.0%, from $81.9 million for the year ended December 31, 2010 to $108.1 million for the year ended December 31, 2011. An approximate $7.2 million increase in incentive compensation, which was aligned with the improved performance of our business, contributed to the period-over-period increase. Trident, ORMS and J. Rubin added a combined $12.0 million of incremental selling, general and administrative expenses for the year ended December 31, 2011. We also incurred costs of approximately $1.6 million during 2011 which were primarily attributable to the Trident acquisition, which closed in March 2011. As a percentage of net sales, selling, general and administrative expenses decreased from 6.3% for the year ended December 31, 2010 to 5.7% for the year ended December 31, 2011.

Depreciation and amortization. Depreciation and amortization expense increased $3.4 million, or 19.1%, from $17.8 million for the year ended December 31, 2010 to $21.2 million for the year ended December 31, 2011. The increase was primarily attributable to increases in fixed assets resulting from our growth through acquisitions over the past year and from increased capital spending, as our investments in new equipment grew in line with higher business activity levels. Net property and equipment as of December 31, 2011 was $247.8 million compared to $198.8 million as of December 31, 2010. As a percentage of net sales, depreciation and amortization expenses decreased from 1.4% for the year ended December 31, 2010 to 1.1% for the year ended December 31, 2011.

Operating income. Operating income increased $75.0 million, or 124.6%, from $60.2 million for the year ended December 31, 2010 to $135.2 million for the year ended December 31, 2011. The increase was primarily a result of the increase in net sales discussed above, in addition to the impact associated with the acquisitions of Trident, ORMS and J. Rubin, which contributed a combined $13.1 million of incremental operating income for the year ended December 31, 2011. The increase in operating income during 2011 was also partially attributable to the absence of a $3.3 million charge to operating expense for the termination of our advisory agreement with Apollo in connection with our IPO during the second quarter of 2010. As a percentage of net sales, operating income increased from 4.7% for the year ended December 31, 2010 to 7.2% for the year ended December 31, 2011.

Interest expense. Interest expense decreased $2.3 million, or 5.9%, from $38.9 million for the year ended December 31, 2010 to $36.6 million for the year ended December 31, 2011. The decrease was due to the redemption of Metals USA Holdings’ Senior Floating Rate PIK Toggle Notes due 2012 (the “2007 Notes”) in May 2010, partially offset by increased interest expense associated with higher borrowings and a higher average facility rate on the ABL facility. The weighted average outstanding balance on our ABL facility increased from $77.6 million for the year ended December 31, 2010 to $214.8 million for the year ended December 31, 2011. Borrowings under the ABL facility were used to fund the Trident and ORMS acquisitions, in addition to higher working capital needs between the two periods.

Income taxes. Income tax expense for the year ended December 31, 2011 was $33.9 million, resulting in an overall effective tax rate of 34.4%, compared to income tax expense of $6.3 million and overall effective tax rate of 35.3% for the year ended December 31, 2010. The decrease in the tax rate in 2011 is primarily due to the impact of state taxes, permanent items, and the resolution of uncertain tax positions, including those resolved due to the lapsing of statutes of limitation, on the respective levels of pre-tax book income.

Net income. Net income increased from $11.5 million for the year ended December 31, 2010 to $64.6 million for the year ended December 31, 2011. The variance was primarily due to the improved operating performance of our metal service center businesses resulting from increases in end market demand and metal prices, ongoing and permanent cost reductions, and improved returns resulting from aggressive working capital management.

Results of Operations by Segment


	Fiscal Years Ended December 31,
							Operating					Operating
	Net						Costs and					Income						Capital		Tons Shipped (1)
	Sales			%			Expenses		%			(Loss)			%			Spending		Direct			Toll
2012:
Plates and Shapes	$	787.1			39.7	%	$	709.6		38.0	%	$	77.5			65.7	%	$	11.1		611			23
Flat Rolled and Non-Ferrous		1,124.7			56.7	%		1,056.8		56.6	%		67.9			57.5	%		7.4		754			176
Building Products		82.8			4.2	%		81.3		4.4	%		1.5			1.3	%		0.2		—			—
Corporate and other		(11.0	)		–0.6	%		17.9		1.0	%		(28.9	)		–24.5	%		1.4		(14	)		—

Total	$	1,983.6			100.0	%	$	1,865.6		100.0	%	$	118.0			100.0	%	$	20.1		1,351			199


2011:
Plates and Shapes	$	765.9			40.6	%	$	682.9		39.0	%	$	83.0			61.4	%	$	6.4		567			29
Flat Rolled and Non-Ferrous		1,046.7			55.5	%		968.6		55.3	%		78.1			57.8	%		10.5		685			127
Building Products		85.8			4.5	%		86.5		4.9	%		(0.7	)		–0.5	%		4.6		—			—
Corporate and other		(12.5	)		–0.7	%		12.7		0.7	%		(25.2	)		–18.6	%		0.3		(12	)		—

Total	$	1,885.9			100.0	%	$	1,750.7		100.0	%	$	135.2			100.0	%	$	21.8		1,240			156


2010:
Plates and Shapes	$	538.0			41.6	%	$	499.6		40.6	%	$	38.4			63.8	%	$	2.3		488			21
Flat Rolled and Non-Ferrous		680.5			52.7	%		635.2		51.6	%		45.3			75.2	%		0.7		528			30
Building Products		83.0			6.4	%		83.6		6.8	%		(0.6	)		–1.0	%		—		—			—
Corporate and other		(9.4	)		–0.7	%		13.5		1.1	%		(22.9	)		–38.0	%		1.0		(8	)		—

Total	$	1,292.1			100.0	%	$	1,231.9		100.0	%	$	60.2			100.0	%	$	4.0		1,008			51

(1)	Shipments are expressed in thousands of tons and are not an appropriate measure for the Building Products Group.

Segment Results—Year Ended December 31, 2012 Compared to 2011

Plates and Shapes. Net sales increased $21.2 million, or 2.8%, from $765.9 million for the year ended December 31, 2011 to $787.1 million for the year ended December 31, 2012. The increase was primarily attributable to a 6.4% increase in shipments, partially offset by a 3.4% decrease in average realized prices for the year ended December 31, 2012 compared to the year ended December 31, 2011. Selling prices for our Plates and Shapes Group are more transactional in nature and are therefore affected to a greater extent by short term changes in mill pricing, as opposed to our Flat Rolled and Non-Ferrous Group, which conducts a larger percentage of its business on a contractual basis, allowing for a longer time lag between mill price changes and their effect on selling prices. Although we experienced downward price momentum during 2012, end-user demand improved compared to 2011 as evidenced by stronger shipping volumes. Specific sectors that continue to show strong demand are energy and oilfield services, construction heavy equipment, defense, and marine cargo transport vessels. The non-residential construction sector, which has been a key metal consuming end market for us in the past, continued to experience lower demand by historical standards.

Operating costs and expenses increased $26.7 million, or 3.9%, from $682.9 million for the year ended December 31, 2011 to $709.6 million for the year ended December 31, 2012. The increase was primarily attributable to a 6.4% increase in shipments, partially offset by a 2.4% decrease in the average cost per ton for the year ended December 31, 2012 compared to the year ended December 31, 2011. Operating costs and expenses as a percentage of net sales increased from 89.2% for the year ended December 31, 2011 to 90.2% for the year ended December 31, 2012.

Operating income decreased $5.5 million, or 6.6%, from $83.0 million for the year ended December 31, 2011 to $77.5 million for the year ended December 31, 2012. The decrease primarily resulted from an increase in variable operating costs and expenses attributable to higher volumes, in addition to lower average realized prices per ton sold. Operating income as a percentage of net sales decreased from 10.8% for the year ended December 31, 2011 to 9.8% for the year ended December 31, 2012.

Flat Rolled and Non-Ferrous. Net sales increased $78.0 million, or 7.5%, from $1,046.7 million for the year ended December 31, 2011 to $1,124.7 million for the year ended December 31, 2012. The Gregor and Trident acquisitions contributed a combined $47.1 million of incremental sales for the year ended December 31, 2012. The remaining increase was primarily attributable to a 14.2% increase in shipments, partially offset by a 9.5% decrease in average realized prices for the year ended December 31, 2012 compared to the year ended December 31, 2011. Toll processed tonnage increased from 127,000 tons during 2011 to 176,000 tons during 2012. Toll processing describes performing processing services on customer-owned material. Net sales for toll processing equates to the processing service fee charged to the customer. Sales of non-ferrous metals accounted for approximately 39% of the segment’s sales product mix for the year ended December 31, 2012 compared to approximately 40% for the year ended December 31, 2011. Our Flat Rolled and Non-Ferrous segment experienced strong demand in the lawn and garden equipment, residential and commercial heating and air conditioning equipment, aerospace, and automotive sectors during 2012.

Operating costs and expenses increased $88.2 million, or 9.1%, from $968.6 million for the year ended December 31, 2011 to $1,056.8 million for the year ended December 31, 2012. The Gregor and Trident acquisitions contributed a combined $48.8 million of incremental operating costs and expenses to the segment for the year ended December 31, 2012. The remaining increase was primarily attributable to a 14.2% increase in shipments, partially offset by an 8.4% decrease in average cost per ton. Operating costs and expenses as a percentage of net sales increased from 92.5% for the year ended December 31, 2011 to 94.0% for the year ended December 31, 2012.

Operating income decreased $10.2 million, or 13.1%, from $78.1 million for the year ended December 31, 2011 to $67.9 million for the year ended December 31, 2012. The decrease was primarily attributable to higher variable operating costs and expenses associated with the increase in volumes, combined with the decrease in average realized prices discussed above. Operating income as a percentage of net sales decreased from 7.5% for the year ended December 31, 2011 to 6.0% for the same period of 2012.

Building Products. Net sales decreased $3.0 million, or 3.5%, from $85.8 million for the year ended December 31, 2011 to $82.8 million for the year ended December 31, 2012. This segment of our business continues to be affected by lower consumer spending on residential remodeling due to the downturn in the housing market. Although lower financing costs are reducing the cost of financing home improvement projects, weak job growth, high unemployment, declining home prices and subdued consumer confidence have contributed to depressed levels of home improvement spending.

Operating costs and expenses decreased $5.2 million, or 6.0%, from $86.5 million for the year ended December 31, 2011 to $81.3 million for the year ended December 31, 2012. Operating income (loss) improved from an operating loss of $0.7 million for the year ended December 31, 2011 to operating income of $1.5 million for the year ended December 31, 2012.

Corporate and other. This category reflects certain administrative costs and expenses management has not allocated to its industry segments. These costs include compensation for executive officers, insurance, professional fees for audit, tax and legal services and data processing expenses. The negative net sales amount represents the elimination of intercompany sales. The operating loss increased from $25.2 million for the year ended December 31, 2011 to $28.9 million for the year ended December 31, 2012. The increase of $3.7 million from 2011 to 2012 includes costs of approximately $0.8 million incurred during 2012 in connection with the secondary offering of 4.0 million shares of our common stock by Apollo, in addition to costs of $0.7 million which were primarily attributable to the Gregor acquisition, which closed in March 2012.

Segment Results—Year Ended December 31, 2011 Compared to 2010

Plates and Shapes. Net sales increased $227.9 million, or 42.4%, from $538.0 million for the year ended December 31, 2010 to $765.9 million for the year ended December 31, 2011. The increase was primarily attributable to a 21.6% increase in average realized prices, in addition to a 17.1% increase in shipments for the year ended December 31, 2011 compared to the year ended December 31, 2010. While we experienced increased demand from the defense and energy services end markets during 2011, the non-residential construction sector, which has been a key metal consuming end market for us in the past, continued to experience weak demand by historical standards.

Operating costs and expenses increased $183.3 million, or 36.7%, from $499.6 million for the year ended December 31, 2010 to $682.9 million for the year ended December 31, 2011. The increase was primarily attributable to a 20.7% increase in average cost per ton, in addition to a 17.1% increase in shipments for the year ended December 31, 2011 compared to the year ended December 31, 2010. We incurred approximately $0.6 million of facility closure and severance expenses related to the closure of a Plates and Shapes location in Hayward, California during the first quarter of 2011, which contributed to the increase in operating costs and expenses compared to 2010. Operating costs and expenses as a percentage of net sales decreased from 92.9% for the year ended December 31, 2010 to 89.2% for the year ended December 31, 2011.

Operating income increased $44.6 million, or 116.1%, from $38.4 million for the year ended December 31, 2010 to $83.0 million for the year ended December 31, 2011. The increase primarily resulted from the increase in net sales discussed above, in

addition to lower operating costs and expenses as a percentage of net sales, as we continued to focus on cost control. Operating income as a percentage of net sales increased from 7.1% for the year ended December 31, 2010 to 10.8% for the year ended December 31, 2011.

Flat Rolled and Non-Ferrous. Net sales increased $366.2 million, or 53.8%, from $680.5 million for the year ended December 31, 2010 to $1,046.7 million for the year ended December 31, 2011. Trident, ORMS and J. Rubin contributed a combined $194.7 million of incremental sales for the year ended December 31, 2011. The remaining increase was primarily attributable to a 16.9% increase in shipments, in addition to a 7.7% increase in average realized prices for the year ended December 31, 2011 compared to the year ended December 31, 2010. The ORMS acquisition resulted in shipments that included a larger proportion of toll processed tonnage during 2011 as compared to our historical levels. Toll processing describes performing processing services on customer-owned material. Net sales for toll processing equates to the processing service fee charged to the customer. Sales of non-ferrous metals accounted for approximately 40% of the segment’s sales product mix for 2011, compared to approximately 38% for 2010. Our Flat Rolled and Non-Ferrous Group experienced increased demand in the automotive, heating and air conditioning equipment, lawn and garden equipment and aerospace equipment markets during 2011.

Operating costs and expenses increased $333.4 million, or 52.5%, from $635.2 million for the year ended December 31, 2010 to $968.6 million for the year ended December 31, 2011. Trident, ORMS and J. Rubin contributed a combined $181.4 million of incremental operating costs and expenses to the segment for 2011. The remaining increase was primarily attributable to a 16.9% increase in shipments, in addition to a 7.8% increase in average cost per ton. Operating costs and expenses as a percentage of net sales decreased from 93.3% for the year ended December 31, 2010 to 92.5% for the year ended December 31, 2011.

Operating income increased $32.8 million, or 72.4%, from $45.3 million for the year ended December 31, 2010 to $78.1 million for the year ended December 31, 2011. The increase was primarily attributable to the increase in volumes, combined with the increase in average realized prices discussed above. Trident, ORMS and J. Rubin contributed a combined $13.1 million of incremental operating income for year ended December 31, 2011. Operating income as a percentage of net sales increased from 6.7% for the year ended December 31, 2010 to 7.5% for the same period of 2011.

Building Products. Net sales increased $2.8 million, or 3.4%, from $83.0 million for the year ended December 31, 2010 to $85.8 million for the year ended December 31, 2011. Although the Building Products segment experienced top-line growth during 2011 compared to the same period of 2010, this segment of our business continued to be affected by lower consumer spending on residential remodeling due to the effects of the economic recession. Weak job growth, high unemployment, declining home prices and subdued consumer confidence, in addition to decreased access to affordable credit for homeowners and residential remodeling contractors, contributed to depressed levels of home improvement spending.

Operating costs and expenses increased $2.9 million, or 3.5%, from $83.6 million for the year ended December 31, 2010 to $86.5 million for the year ended December 31, 2011. Operating costs and expenses as a percentage of net sales for 2011 were approximately in line with 2010.

Operating loss increased from $0.6 million for the year ended December 31, 2010 to $0.7 million for the year ended December 31, 2011. Results from operations for 2011 include a non-recurring gain of approximately $0.7 million from a settlement with the previous owners of the Dura-Loc Roofing Systems, Ltd. (now Allmet Roofing Products) roofing business we acquired in 2006 to cover pre-acquisition warranty claims.

Corporate and other. This category reflects certain administrative costs and expenses management has not allocated to its industry segments. These costs include compensation for executive officers, insurance, professional fees for audit, tax and legal services and data processing expenses. The negative net sales amount represents the elimination of intercompany sales. The operating loss increased $2.3 million for the year ended December 31, 2011 as compared to the year ended December 31, 2010 due primarily to higher professional fees and higher expenses associated with incentive compensation as a result of the underlying growth and improved performance of the business.

Liquidity and Capital Resources

Our primary sources of short-term liquidity are borrowings under the ABL facility and our cash flow from operations. We believe these resources will be sufficient to meet our working capital and capital expenditure requirements for the next year. As of December 31, 2012, we had $216.3 million drawn on the ABL facility, our borrowing availability was $194.3 million, and we had cash of $15.3 million.

Our borrowing availability fluctuates daily with changes in eligible accounts receivables and inventory, less outstanding borrowings and letters of credit. For more information, see “—Financing Activities” below. At March 8, 2013, we had $225.2 million drawn on the ABL facility, our borrowing availability was $196.7 million and we had cash of approximately $13.8 million.

We generally meet long-term liquidity requirements, the repayment of debt and investment funding needs through additional borrowings under the ABL facility and the issuance of debt securities. At December 31, 2012, our debt consisted of $216.3 million of

outstanding borrowings on the ABL facility, $222.7 million principal amount of the Term Loan, IRBs with $12.3 million principal amount outstanding, and $0.3 million of capital lease and other obligations. We believe that cash flow from operations, supplemented by cash available under the ABL facility, will be sufficient to enable us to meet our debt service and operational obligations as they come due for at least the next twelve months.

With respect to long-term liquidity, we believe that we will be able to meet our working capital, capital expenditure and debt service obligations. Our ability to meet long-term liquidity requirements is subject to obtaining additional debt and/or equity financing. Decisions by lenders and investors to enter into such transactions with us will depend upon a number of factors, such as our historical and projected financial performance, compliance with the terms of our current credit agreements, industry and market trends, the availability of capital, and the relative attractiveness of alternative lending or investment opportunities.

Operating and Investing Activities

Although we do not produce any metal, our financial performance is affected by changes in metal prices. When metal prices rise, the prices at which we are able to sell our products generally increase over their historical costs; accordingly, our working capital (which consists primarily of accounts receivable and inventory) tends to increase in a rising price environment. Conversely, when metal prices fall, our working capital tends to decrease. Our working capital (current assets less current liabilities) increased from $503.4 million at December 31, 2011 to $525.8 million at December 31, 2012.

Changes in metal prices also affect our liquidity because of the time difference between our payment for our raw materials and our collection of cash from our customers. We sell our products and typically collect our accounts receivable within 45 days after the sale; however, we tend to pay for replacement materials (which are more expensive when metal prices are rising) over a much shorter period, primarily to benefit from early-payment discounts that are substantially higher than our cost of incremental debt. As a result, when metal prices are rising, we tend to draw more on the ABL facility to cover the cash flow cycle from material purchase to cash collection. When metal prices fall, we can replace our inventory at lower cost and, thus, generally the ABL facility utilization is reduced. We believe our cash flow from operations, supplemented with the cash available under the ABL facility, will provide sufficient liquidity to meet the challenges and obligations we face during the current metal price environment. Additionally, in the past, we have used cash flows from operations and borrowing availability under the ABL facility to fund acquisitions of value-added businesses that enhance our metal service center strategy. The operating covenants contained in the Merger Agreement with Reliance presently restrict our ability to engage in such acquisitions. However, if the Merger with Reliance is not completed, we expect we would continue to use cash flows from operations and borrowing availability under the ABL facility to fund such acquisitions in the future.

Cash Flows

The following discussion of the principal sources and uses of cash should be read in conjunction with our Consolidated Statements of Cash Flows which are set forth under Item 8.“Financial Statements and Supplementary Data.”

Year Ended December 31, 2012

During the year ended December 31, 2012, net cash provided by operating activities was $67.2 million. Our working capital increased during the first six months of 2012 as we experienced a modest increase in mill pricing and stable end market demand during the period. Our working capital needs decreased during the latter half of 2012 as we experienced a declining price environment and more subdued end market demand. Lower investments in working capital allowed us to convert sales into cash, which translated to an increase in net cash provided by operating activities.

Net cash used in investing activities was $36.7 million for the year ended December 31, 2012, and consisted primarily of $17.0 million of acquisition costs for the Gregor acquisition, which closed on March 12, 2012, and capital expenditures of $20.1 million. The most significant internal capital project for 2012 was the installation of additional laser-cutting equipment in our Tulsa, Oklahoma Plates and Shapes service center.

Net cash used in financing activities was $27.3 million for the year ended December 31, 2012, which consisted primarily of net repayments on the ABL facility of $11.4 million, net repayments of long-term debt of $9.8 million (which includes $4.2 million of call premium on the extinguishment of the Metals USA Notes), $4.0 million of cash paid for loan financing costs and $2.2 million of dividends paid to the holders of our common stock.

Year Ended December 31, 2011

During the year ended December 31, 2011, net cash used in operating activities was $12.3 million. Our working capital increased during 2011 as we experienced increasing prices and end market demand. Increases of $48.6 million in our accounts receivable balance and $93.6 million in our inventory value were the primary contributors to operating cash outflows for the period. Accounts receivable increased due to stronger sales which were primarily driven by sharply higher shipments versus the prior year.

Net cash used in investing activities was $109.6 million for the year ended December 31, 2011, and consisted primarily of $88.1 million of acquisition costs, net of cash acquired, for the Trident acquisition, which closed on March 11, 2011, and capital expenditures of $21.8 million. The most significant internal capital project for 2011 was the construction of our Thomasville, Alabama Flat Rolled and Non-Ferrous service center.

Net cash provided by financing activities was $117.4 million for the year ended December 31, 2011, which consisted of net borrowings on the ABL facility of $121.7 million offset by $2.9 million of cash paid for loan financing costs and $1.4 million of debt repayments.

Year Ended December 31, 2010

During the year ended December 31, 2010, net cash used in operating activities was $56.9 million. This amount was primarily attributable to increases in accounts receivable and inventories. Changes in working capital during 2010 reflected improving business conditions as commodity prices and demand trended upward. We increased inventory tonnage on hand commensurate with increased levels of shipments to our customers, while prices increased moderately throughout the year, despite some intermittent volatility. Our accounts receivable increased due to higher sales levels in 2010.

Net cash used in investing activities was $31.3 million for the year ended December 31, 2010, and consisted primarily of $28.0 million for the acquisition of J. Rubin and ORMS in June and December, respectively. Capital expenditures amounted to $4.0 million for the year ended December 31, 2010. There were no material individual capital investment projects specific to any facilities during 2010.

Net cash provided by financing activities was $98.8 million for the year ended December 31, 2010, and consisted primarily of net proceeds from the IPO of $221.2 million and net borrowings under the ABL facility of $31.0 million, partially offset by the repayments of long-term debt of $146.7 million related to the redemption of the 2007 Notes.

Covenant Compliance

Adjusted EBITDA

Adjusted EBITDA (as defined by the amended and restated loan and security agreement governing the ABL facility (the “ABL Credit Agreement”)) is defined as EBITDA further adjusted to exclude certain non-cash and non-recurring items. Adjusted EBITDA is not a defined term under GAAP and should not be used as an alternative to net income as an indicator of operating performance or to cash flow as a measure of liquidity.

Fixed Charge Coverage Ratio

Under the ABL facility, the FCCR is determined on a rolling four-quarter period, often referred to as a last-twelve month period, by dividing (i) the sum of Adjusted EBITDA of Metals USA minus income taxes paid in cash minus non-financed capital expenditures by (ii) the sum of certain distributions paid in cash, cash interest expense and scheduled principal reductions on debt paid by Metals USA. Should borrowing availability under the ABL facility fall below Minimum Availability, we must maintain a FCCR of at least 1.0 to 1.0, measured on a trailing four-quarter basis. As of December 31, 2012, our borrowing availability under the ABL facility was $194.3 million. In addition, the FCCR also is an important measure of our liquidity and affects our ability to take certain actions, including paying dividends to stockholders and making acquisitions.

We believe that the inclusion of supplementary adjustments to EBITDA applied in presenting Adjusted EBITDA are appropriate to provide additional information to investors to demonstrate compliance with the covenants in our debt agreements. As of December 31, 2012, our FCCR was 2.44. As of December 31, 2012, we had $194.3 million of additional borrowing capacity under the ABL facility.

Negative Covenants

The ABL Credit Agreement and the Term Loan Agreement contain certain negative covenants that limit or restrict the ability of Metals USA and certain of its subsidiaries to take certain actions. Subject to specified exceptions, these covenants limit the ability of Metals USA and certain of its subsidiaries to, among other things, incur indebtedness; create liens and encumbrances; make acquisitions and investments; dispose of or transfer assets; pay dividends or make other payments in respect of their capital stock; engage in transactions with affiliates; and change their business. Our inability to satisfy the terms of these negative covenants does not, by itself, constitute a covenant violation or event of default. Rather, these negative covenants are event-related restrictions that may limit or prohibit the Company from taking certain corporate actions. As of December 31, 2012, we were not restricted under any of the negative covenants in the ABL Credit Agreement and the Term Loan Agreement.

Pro Forma Adjusted EBITDA

Pro Forma Adjusted EBITDA is defined as Adjusted EBITDA (as discussed above) with additions for the Adjusted EBITDA of recent acquisitions as though we owned those businesses for the twelve-month period ended December 31, 2012, 2011 and 2010. Pro

Forma Adjusted EBITDA, as defined in our debt agreements, is a non-GAAP measure used in the calculation of our Consolidated Total Net Senior Secured Leverage Ratio, as defined by the Term Loan Agreement. As of December 31, 2012, our Consolidated Total Net Senior Secured Leverage Ratio was 3.1 based on a trailing twelve-month Pro Forma Adjusted EBITDA of $147.7 million.

Limitations of Adjusted EBITDA

There are material limitations associated with making the adjustments to our earnings to calculate Adjusted EBITDA and using such a non-GAAP financial measure as compared to the most directly comparable GAAP financial measures. For instance, Adjusted EBITDA does not include:

•

interest expense, and, because we have borrowed money in order to finance our operations, interest expense is a necessary element of our costs and ability to generate revenue;

•

income tax expense, and because the payment of taxes is part of our operations, income tax expense is a necessary element of our costs and ability to operate; and

•

depreciation and amortization expense, and, because we use capital assets, depreciation and amortization expense is a necessary element of our costs and ability to generate revenue.

In addition, fixed charges should not be considered an alternative to interest expense.

Below is a reconciliation of net income to EBITDA, Adjusted EBITDA and net cash (used in) provided by operating activities:


	Years Ended December 31,
	2012			2011			2010
	(in millions, except ratios)
Net income	$	52.7		$	64.6		$	11.5
Depreciation and amortization (1)		24.9			23.3			19.8
Interest expense		36.3			36.6			38.9
Loss on extinguishment of debt		6.3			—			3.5
Provision for income taxes		22.8			33.9			6.3
Other (income) expense, net		(0.1	)		0.1			—


EBITDA		142.9			158.5			80.0
Covenant defined adjustments:
Non-cash employee benefit expense (2)		3.0			2.4			1.2
Facilities closure (3)		—			0.6			—
Advisory agreement fees and other costs (4)		—			—			3.8
Acquisition expenses (5)		0.6			1.6			—
Secondary offering costs (6)		0.8			—			—


Adjusted EBITDA		147.3			163.1			85.0
Pro forma acquisition adjustments		0.4			1.2			0.9


Pro Forma Adjusted EBITDA (7)		147.7			164.3			85.9
(Gain) loss on sale of property and equipment		(0.2	)		—			0.3
Provision for bad debts		2.0			2.9			2.4
Amortization of debt issuance costs and discounts on long-term debt		3.4			2.9			4.3
Deferred income taxes		4.4			15.4			1.1
Excess tax benefit from stock-based compensation		(0.1	)		—			(0.1	)
Non-cash interest on PIK option		—			—			6.2
Cash payment on PIK option		—			—			(23.2	)
Advisory agreement termination charge		—			—			3.3
Interest expense		(36.3	)		(36.6	)		(38.9	)
Provision for income taxes		(22.8	)		(33.9	)		(6.3	)
Other expense		(0.5	)		(1.0	)		—
Facilities closure		—			(0.6	)		—
Advisory agreement fees and other costs		—			—			(3.8	)
Acquisition expenses		(0.6	)		(1.6	)		—
Secondary offering costs		(0.8	)		—			—
Pro forma acquisition adjustments		(0.4	)		(1.2	)		(0.9	)
Changes in assets and liabilities		(28.6	)		(122.9	)		(87.2	)


Net cash provided by (used in) operating activities	$	67.2		$	(12.3	)	$	(56.9	)


Net cash used in investing activities	$	(36.7	)	$	(109.6	)	$	(31.3	)


Net cash (used in) provided by financing activities	$	(27.3	)	$	117.4		$	98.8


Fixed charge coverage ratio numerator (8)	$	96.2		$	119.9		$	88.5
Fixed charge coverage ratio denominator (8)	$	39.5		$	42.5		$	36.3

FCCR (8)		2.44			2.82			2.44

(1)	Includes depreciation for the Building Products Group that is included in cost of sales.

(2)	Primarily stock-based compensation expense.

(3)	This amount represents charges for the closure of one facility in our Plates and Shapes Group during 2011.

(4)	Primarily represents expenses related to the advisory agreement we had with Apollo.

(5)	The amount for 2011 primarily relates to the acquisition of Trident, which closed in March 2011. The amount for 2012 primarily relates to the acquisition of Gregor, which closed in March 2012.

(6)	Represents costs incurred in connection with the August 2012 secondary offering of 4.0 million shares of our common stock by Apollo.

(7)	Pro Forma Adjusted EBITDA, as defined in our credit agreements, which is used in the calculation of our Consolidated Total Net Leverage Ratio, as defined in the Term Loan Agreement.

(8)	These amounts represent the FCCR numerator, the FCCR denominator, and the FCCR, each as defined by the ABL facility.

Financing Activities

The ABL Facility

On December 17, 2010, Flag Intermediate, Metals USA, and certain subsidiaries of Metals USA entered into the ABL Credit Agreement with the lenders party thereto and Bank of America, N.A., as administrative agent and collateral agent. The ABL Credit Agreement provides for borrowings of up to $500.0 million of Tranche A commitments and $35.0 million of first-in last-out (“FILO”) Tranche A-1 commitments (which may be increased up to $750.0 million at the option of Metals USA, including $35.0 million under the FILO tranche), under the 5-year, senior secured ABL facility that amended and restated Metals USA’s then-existing $625.0 million senior secured asset-based credit facility that was scheduled to mature on November 30, 2011.

On March 9, 2011, we activated $25.0 million of the FILO tranche under the ABL facility. The ABL facility initially permitted us to borrow on a revolving basis through the earlier of November 30, 2015 and 60 days prior to the scheduled maturity of the Metals USA Notes, unless the Metals USA Notes are refinanced to a date more than 5 years and 60 days after the closing date of the ABL facility and/or repaid prior to such date. Substantially all of our subsidiaries are borrowers under the ABL facility.

On August 10, 2011, we amended the ABL facility by reducing the borrowing costs on the Tranche A commitments by 75 basis points and reducing the borrowing costs on the FILO tranche by 62.5 basis points. Under the amendment, the maturity date of the ABL facility was extended to the earlier of August 10, 2016 and 60 days prior to the scheduled maturity of the Metals USA Notes, unless the Metals USA Notes are refinanced to a date more than 5 years and 60 days after the closing date of the ABL facility and/or repaid prior to such date.

As noted below, all of the Metals USA Notes were redeemed in December 2012, and the ABL facility maturity date is August 10, 2016.

Borrowing Base. The maximum availability under the ABL facility is based on eligible receivables and eligible inventory, subject to certain reserves. Our borrowing availability fluctuates daily with changes in eligible receivables and inventory, less outstanding borrowings and letters of credit. The borrowing base is equal to:

•

85% of the net amount of eligible accounts receivable, plus

•

the lesser of (x) 80% of the lesser of the original cost or market value of eligible inventory and (y) 90% of the net orderly liquidation value of eligible inventory, plus

•

an incremental amount of the lesser of (x) the maximum commitments under the FILO tranche and (y) the sum of (i) 5% of the net amount of eligible accounts receivable and (ii) 5% of the net orderly liquidation value of eligible inventory during the effectiveness of any FILO tranche, less reserves.

The ABL facility provides sub-limits for up to $25.0 million of swingline loans and up to $100.0 million for the issuance of letters of credit. Both the face amount of any outstanding letters of credit and any swingline loans will reduce borrowing availability under the ABL facility on a dollar-for-dollar basis.

As of December 31, 2012, we had $428.9 million of eligible collateral, $216.3 million in outstanding advances, $18.3 million in open letters of credit and $194.3 million of additional borrowing capacity. As of December 31, 2012, we had $15.3 million of cash on hand.

As of March 8, 2013, we had $440.2 million of eligible collateral, $225.2 million in outstanding advances, $18.3 million in open letters of credit and $196.7 million of additional borrowing capacity. As of March 8, 2013, we had approximately $13.8 million of cash on hand.

Guarantees and Security. Substantially all of our subsidiaries are defined as “borrowers” under the ABL Credit Agreement. The obligations under the ABL facility are guaranteed by Flag Intermediate and certain of our domestic subsidiaries and are secured by a first-priority lien and security interest in, among other things, accounts receivable, inventory and deposit accounts of Flag Intermediate, Metals USA and the subsidiaries of Metals USA party to the ABL Credit Agreement and a second-priority lien and security interest in, among other things, substantially all other tangible and intangible personal and real property owned by such companies, subject to certain exceptions.

Interest Rate and Fees. At Metals USA’s option, interest accrues on the loans made under the ABL facility at either LIBOR plus a specified margin (set at 1.75% (3.25% for the FILO tranche) as of December 31, 2012), or the base rate (which is based off of the federal funds rate plus 0.50%, Bank of America’s prime rate or LIBOR plus 1.00%), plus a specified margin (set at 0.75% (2.25% for the FILO tranche) as of December 31, 2012). Under the ABL facility amendment that was executed on August 10, 2011, the specified margins over LIBOR were reduced by 75 basis points for the Tranche A commitments and 62.5 basis points for the FILO tranche. The marginal rates vary based on our average monthly excess availability (as defined in the ABL Credit Agreement). The applicable base rate and the effective LIBOR rate for the loans made under the ABL facility were 3.25% and 0.31%, respectively, as of December 31, 2012.

A commitment fee is payable on any unused commitment equal to 0.25% per annum to the lenders under the ABL facility if utilization under the facility exceeds 40.0% of the total commitments under the facility and a commitment fee equal to 0.375% per annum if utilization under the facility is less than or equal to 40.0% of the total commitments under the facility. Customary letter of credit fees are also payable, as necessary.

Certain Conditions Precedent and Covenants. As a condition precedent to any borrowing or issuance of a letter of credit, a material adverse effect shall not have occurred or exist. The ABL facility contains customary representations, warranties and covenants, including limitations on our ability to incur or guarantee additional debt, subject to certain exceptions, pay dividends, or make redemptions and repurchases, with respect to capital stock, repay debt, create or incur certain liens, make certain loans or investments, make acquisitions or investments, engage in mergers, acquisitions or asset sales, and engage in certain transactions with affiliates. The ABL facility requires a lock-box arrangement for collection of accounts receivable and proceeds from sales of inventory. Metals USA may make withdrawals from the lock-box unless an event of default exists or borrowing availability is less than the greater of (i) $50.0 million and (ii) 12.5% of the lesser of (A) the borrowing base (not to exceed $62.5 million) and (B) the aggregate commitment. We do not have to maintain a minimum FCCR as long as our borrowing availability is greater than or equal to the Minimum Availability, defined as the greater of (i) $45.0 million and (ii) 10% of the lesser of the borrowing base and the aggregate commitment. We must maintain an FCCR of at least 1.0 to 1.0 if borrowing availability falls below the Minimum Availability. For purposes of determining covenant compliance, the FCCR is determined by dividing (i) the sum of Adjusted EBITDA (as defined in the ABL Credit Agreement) minus income taxes paid in cash (excluding certain specified deferred taxes) minus non-financed capital expenditures by (ii) the sum of certain distributions paid in cash, cash interest expense and scheduled principal reductions on debt, and is calculated based on such amounts for the most recent period of four consecutive fiscal quarters for which financial statements are available. FCCR and Adjusted EBITDA are each calculated on a pro forma basis. As of December 31, 2012, our FCCR was 2.44. We were in compliance with all covenants as of December 31, 2012.

Certain Events of Default and Remedies. The ABL facility contains events of default with respect to: default in payment of principal when due, default in the payment of interest, fees or other amounts after a specified grace period, material breach of the representations or warranties, default in the performance of covenants, a default that causes or permits acceleration under any indebtedness with a principal amount in excess of a specified amount, certain bankruptcy events, certain ERISA violations, invalidity of certain security agreements or guarantees, material judgments, or a change of control. In the event of default, the ABL Credit Agreement may permit a majority of the lenders to: (i) restrict the amount of or refuse to make revolving loans; (ii) cause customer receipts to be applied against borrowings under the ABL facility which would cause Metals USA to suffer a rapid loss of liquidity and restrict the ability to operate on a day-to-day basis; (iii) restrict or refuse to provide letters of credit; or ultimately: (iv) terminate the commitments and the agreement; or (v) declare any or all obligations to be immediately due and payable if such default is not cured in the specified period required. Any payment default or acceleration under the ABL facility would also result in a default under the Term Loan that would provide the lenders under the Term Loan with the right to demand immediate repayment.

The Term Loan

On December 14, 2012, Flag Intermediate and Metals USA entered into the Term Loan Agreement with certain lenders and Credit Suisse AG, as administrative agent. The Term Loan Agreement provides for a new seven year senior secured term loan to Metals USA in the amount of $225.0 million. The Term Loan will amortize in equal quarterly installments during its term, commencing on March 31, 2013, in an aggregate annual amount equal to 1.00% of the original principal amount of the Term Loan with the remainder due at maturity. The Term Loan bears interest, at Metals USA’s election, at an annual rate of either (i) the greater of a base rate and 2.25%, plus a margin of 4.00% or (ii) the greater of LIBOR and 1.25%, plus a margin of 5.00%. The Term Loan was issued at an original issue discount of 1.00%. Metals USA is the borrower under the Term Loan Agreement. All of Metals USA’s obligations under the Term Loan Agreement are and will be guaranteed by Flag Intermediate and all of Metals USA’s existing and future domestic subsidiaries, except as provided in the Term Loan Agreement.

The Term Loan Agreement contains certain customary negative covenants that limit or restrict the ability of Metals USA and certain of its subsidiaries to take certain actions. Subject to specified exceptions, these covenants limit the ability of Metals USA and certain of its subsidiaries to, among other things, incur indebtedness; create liens and encumbrances; make acquisitions and investments; dispose of or transfer assets; pay dividends or make other payments in respect of their capital stock; engage in transactions with affiliates; and change their business. Among other exceptions to these covenants, the Term Loan Agreement includes a $15 million annual dividend basket in order to permit the distribution of funds by Metals USA to the Company for the payment of the Company’s previously announced regular quarterly dividend on the Company’s common stock, subject to declaration by the Company’s Board of Directors.

The Term Loan Agreement also contains customary affirmative covenants requiring, among other things, maintenance of corporate existence, licenses, properties and insurance; compliance with laws, payment of taxes and performance of other material obligations; and delivery of financial and other information to the lenders under the Term Loan Agreement.

The Term Loan Agreement also includes customary events of default, including events of default relating to non-payment of principal, interest or fees, material inaccuracy of representations and warranties, violation of covenants, cross payment defaults, cross acceleration, a change of control (as defined in the Term Loan Agreement), bankruptcy and insolvency events, and the failure of the Intercreditor Agreement (as defined below) to remain in full force and effect. Subject to the terms and conditions of the Term Loan Agreement, if an event of default under the Term Loan Agreement occurs, the lenders will be able to accelerate the maturity of the loans outstanding under the Term Loan Agreement, together with accrued unpaid interest and other amounts owed, and exercise other rights and remedies. We were in compliance with all covenants as of December 31, 2012.

The Term Loan and related obligations of Flag Intermediate, Metals USA and the subsidiaries of Metals USA are secured by a first priority security interest in (i) all of the equity interests of Metals USA held by Flag Intermediate and (ii) substantially all of the present and future material assets of Metals USA and each subsidiary guarantor, including pledges of equity interests in certain subsidiaries, provided that the liens securing the Term Loan are, as described below, second priority with respect to certain working capital assets with respect to which Metals USA’s ABL facility has a first priority lien.

In connection with the Term Loan Agreement, Flag Intermediate, Metals USA and the subsidiaries of Metals USA that guarantee the Term Loan entered into a Lien Subordination and Intercreditor Agreement effective December 14, 2012 (the “Intercreditor Agreement”). The Intercreditor Agreement governs the liens upon and security interests granted in the collateral securing both the Term Loan and the loans made pursuant to the ABL Credit Agreement. Under the Intercreditor Agreement, the ABL Credit Agreement is secured by first priority security interests, and the Term Loan is secured by second priority security interests, in all accounts receivable, inventory and certain related assets of Flag Intermediate, Metals USA and the subsidiary guarantors. Under the Intercreditor Agreement, the Term Loan is secured by first priority security interests, and the ABL Credit Agreement is secured by second priority security interests, in all other assets of Flag Intermediate, Metals USA and the subsidiary guarantors that serve as collateral for the facilities.

The Metals USA Notes

In connection with the Apollo Merger in November 2005, we sold $275.0 million aggregate principal amount of the Metals USA Notes. On December 14, 2012, Metals USA used the proceeds of the Term Loan, in addition to borrowings under the ABL facility, to redeem all of the Metals USA Notes, representing an aggregate principal amount of $226.3 million as of the date thereof. The redemption price of the Metals USA Notes was 101% of the outstanding principal amount, plus accrued and unpaid interest thereon. The aggregate cash payment for the redemption, including unpaid interest and a call premium of $4.2 million, was approximately $232.6 million. Upon completion of the redemption, the trustee under the indenture governing the Metals USA Notes acknowledged that all of the obligations of Flag Intermediate, Metals USA and the subsidiary guarantors thereunder have been satisfied and discharged and the liens on the collateral securing the obligations relating to the Metals USA Notes have been released.

In connection with the redemption of the Metals USA Notes, $2.1 million of unamortized deferred debt offering costs were written off and included in the loss on extinguishment of debt.

Industrial Revenue Bonds

Metals USA is a conduit bond obligor on IRBs issued by the municipalities of Muskogee, Oklahoma and Jeffersonville, Indiana. The IRBs are secured by certain real estate, leasehold improvements and equipment acquired with proceeds from the IRBs. The Muskogee IRB is due in one lump sum of $5.7 million on May 1, 2023. The Jeffersonville IRBs had principal amounts outstanding of $3.9 million and $2.7 million as of December 31, 2012, and are being redeemed in varying amounts annually through August 2021 and December 2027, respectively. The interest rates assessed on the IRBs vary from month to month. As of December 31, 2012, the weighted average variable interest rate on the IRBs was 0.44%. The IRBs place various restrictions on certain of our subsidiaries, including but not limited to maintenance of required insurance coverage, maintenance of certain financial ratios, limits on capital expenditures and maintenance of tangible net worth and are supported by letters of credit. We were in compliance with all covenants as of December 31, 2012.

Restricted Payments

Both the ABL Credit Agreement and the Term Loan Agreement contain restrictions as to the payment of dividends. Under the ABL Credit Agreement, general distributions are unlimited if the FCCR is at least 1.1:1.0 and availability (including a 30 day lookback) exceeds the greater of (i) $50.0 million and (ii) 15% of the lesser of the borrowing base (not to exceed $75.0 million) and the aggregate commitments. As of December 31, 2012, our FCCR as defined in the ABL Credit Agreement was 2.44, and our borrowing availability was $194.3 million.

Commitments and Contingencies

Litigation Relating to the Merger

Other Litigation

Dividends on Common Stock

Off-Balance Sheet Arrangements

We were not engaged in off-balance sheet arrangements through any unconsolidated, limited purpose entities and no material guarantees of debt or other commitments to third parties existed as of December 31, 2012.

Critical Accounting Policies and Estimates

The discussion and analysis of the Company’s financial condition and results of operations is based upon the Company’s consolidated financial statements, which have been prepared in accordance with GAAP. The preparation of these consolidated financial statements requires the Company to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosures of contingent assets and liabilities. Estimates are based on historical experience and on various other assumptions that are believed to be reasonable under the circumstances. The result of this process forms the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. We review our estimates and judgments on a regular, ongoing basis. Actual results may differ from these estimates due to changed circumstances and conditions.

The following accounting policies and estimates are considered critical in light of the potential material impact that the estimates, judgments and uncertainties affecting the application of these policies might have on the Company’s reported financial information.

Accounts Receivable

We generally recognize revenue as product is shipped (risk of loss for our products generally passes at time of shipment), net of provisions for estimated returns. Financial instruments, which potentially subject us to concentrations of credit risk, consist principally of trade accounts receivable. Collections on our accounts receivable are made through several lockboxes maintained by our lenders. Credit risk associated with concentration of cash deposits is low as we have the right of offset with our lenders for a substantial portion of our cash balances. Concentrations of credit risk with respect to trade accounts receivable are within several industries. Generally, credit is extended once appropriate credit history and references have been obtained. We perform ongoing credit evaluations of customers and set credit limits based upon reviews of customers’ current credit information and payment history. We monitor customer payments and maintain a provision for estimated credit losses based on historical experience and specific customer collection issues that we have identified. Provisions to the allowance for doubtful accounts are made monthly and adjustments are made periodically based upon our expected ability to collect all such accounts. Generally we do not require collateral for the extension of credit.

Each month we consider all available information when assessing the adequacy of the provision for allowances, claims and doubtful accounts. Adjustments made with respect to the allowance for doubtful accounts often relate to improved information not previously available. Uncertainties with respect to the allowance for doubtful accounts are inherent in the preparation of financial statements. The rate of future credit losses may not be similar to past experience.

Inventories

As of December 31, 2012 we had inventories of $432.3 million. Inventories are stated at the lower of cost or market (“LCM”). Our inventories are accounted for using a variety of methods including specific identification, average cost and the first-in, first-out method of accounting. Under the LCM concept, the Company is required to recognize an additional expense in cost of sales in the current period for any inventory whose replacement cost has declined below its carrying cost.

We conduct an LCM inventory valuation annually as of December 31 or more frequently if circumstances indicate potential write-downs. The LCM valuation requires us to review product specific facts and circumstances, including current selling prices, estimated costs to complete and deliver the product, expectations for normal profit margins, costs currently in inventory, as well as current replacement costs.

In addition to making an assessment of current selling prices relative to product cost, we also review customer purchasing trends and take into consideration the current economic conditions as they relate to our industry and the end-use industries of our customers.

During 2008 and 2009, the global financial crisis caused significant contraction in industrial production world-wide. The reduction in demand for metals was driven by widespread inventory destocking throughout the supply chain as industry participants looked to preserve liquidity by reducing their investment in working capital. As a direct consequence of the rapid and unprecedented decline in metals prices we experienced as a result of the economic recession discussed above, we recorded $53.4 million of write-downs during the year ended December 31, 2009, and $6.8 million of write-downs during the year ended December 31, 2008, for inventory LCM adjustments in our metal service center businesses.

We have not recorded any LCM adjustments since 2009, as metal selling prices relative to metal costs have been more favorable since approximately the second quarter of 2009. We continue to manage our inventory by working to optimize the tradeoff between holding inventory and forgoing incremental sales.

We regularly review inventory on hand and may periodically record provisions for damaged and slow-moving inventory based on the factors discussed above. Adjustments made with respect to inventory valuation often relate to improved information not previously available. Uncertainties with respect to inventory valuation are inherent in the preparation of financial statements. The rate of future losses associated with damaged or slow moving inventory, or LCM write-downs, may not be similar to past experience.

Goodwill

The acquisition method of accounting for business combinations requires the Company to make use of estimates and judgments to allocate the purchase price paid for acquisitions to the fair value of the net tangible and identifiable intangible assets. We perform a goodwill impairment test annually as of October 31. In addition, goodwill would be tested more frequently if changes in circumstances or the occurrence of events indicates that a potential impairment exists.

We test for impairment of goodwill by first making a qualitative assessment of whether it is more likely than not that a reporting unit’s fair value is less than its carrying amount before applying the two-step goodwill impairment test. If we conclude that it is more likely than not that the fair value of a reporting unit is less than its carrying amount, we proceed to the two-step approach as prescribed in Accounting Standards Codification (“ASC”) Topic 350—“Intangibles—Goodwill and Other” (“ASC 350”). The first step of the impairment test compares the fair value of a reporting unit with its carrying value including assigned goodwill. The second step of the impairment test is required only in situations where the carrying value of the reporting unit exceeds its fair value as determined in the first step. In such instances, we compare the implied fair value of goodwill to its carrying value. The implied fair value of goodwill is determined by allocating the fair value of a reporting unit to all of the assets and liabilities of that unit as if the reporting unit had been

acquired in a business combination and the fair value of the reporting unit was the price paid to acquire the reporting unit. The excess of the fair value of a reporting unit over the amounts assigned to its assets and liabilities is the implied fair value of goodwill. An impairment loss is recorded to the extent that the carrying amount of the reporting unit goodwill exceeds the implied fair value of that goodwill.

We use the present value of future cash flows to determine fair value in combination with the market approach. While we believe that our key assumptions and estimates are consistent with those a hypothetical market participant would use given circumstances that are present at the time the estimates are made, future operating results could reasonably differ from our estimates and could require a provision for impairment in a future period.

New Accounting Pronouncements

In June 2011, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2011-05 Comprehensive Income (Topic 220): Presentation of Comprehensive Income (“ASU 2011-05”), which amends some of the guidance in ASC Topic 220 “Comprehensive Income” regarding how companies must present comprehensive income. The main provisions of ASU 2011-05 provide that an entity that reports items of other comprehensive income has the option to present comprehensive income in either a single statement or two separate statements. A single statement would contain the components of net income and total net income, the components of other comprehensive income and total other comprehensive income, and a total for all comprehensive income. In a two-statement approach, an entity must present the components of net income and total net income in the first statement. That statement must be immediately followed by a financial statement that presents the components of other comprehensive income, a total for other comprehensive income, and a total for all comprehensive income. The ASU is intended to increase the prominence of other comprehensive income in financial statements and to facilitate convergence of U.S. GAAP and International Financial Reporting Standards. The amendments in ASU 2011-05 are to be applied retrospectively. For public entities, the ASU is effective for fiscal years and interim periods within those years beginning after December 15, 2011. The Company adopted ASU 2011-05 within its condensed consolidated financial statements in the first quarter of 2012. ASU 2011-05 impacts presentation only and has no effect on the Company’s financial condition, results of operations, or cash flows.

Contractual Obligations

We enter into operating leases for many of our facility, vehicle and equipment needs. These leases allow us to conserve cash by paying a monthly lease rental fee for the use of, rather than purchase of, facilities, vehicles and equipment. At the end of the lease, we have no further obligation to the lessor. We have varying amounts of open purchase orders that are subject to renegotiation/cancellation by either party as to quantity or price. Generally, the amounts outstanding relate to delivery periods of up to 12 weeks from the date of the purchase order.

Our future contractual obligations as of December 31, 2012 include the following:


			For the Fiscal Years Ended December 31,
	Total		2013		2014		2015		2016		2017		Beyond
			(in millions)
ABL facility (1)	$	216.3	$	—	$	—	$	—	$	216.3	$	—	$	—
Purchase obligations		179.9		179.9		—		—		—		—		—
Term Loan (2)		225.0		2.2		2.3		2.3		2.3		2.3		213.6
IRBs (3)		12.3		0.4		0.4		0.4		0.5		0.5		10.1
Other obligations (4)		5.7		0.8		0.7		0.6		0.6		0.6		2.4
Operating lease obligations		43.8		11.0		7.8		7.4		4.5		3.3		9.8


Total (5)	$	683.0	$	194.3	$	11.2	$	10.7	$	224.2	$	6.7	$	235.9

(1)

The amounts stated do not include interest costs. The ABL facility bears interest based upon a margin over reference rates established within a specific pricing grid. The marginal rates will vary based on availability. The applicable base rate and the effective LIBOR rate were 3.25% and 0.31%, respectively, on December 31, 2012.

(2)	The amounts stated do not include interest costs. The Term Loan bears interest based upon a margin over reference rates. The applicable base rate and the effective LIBOR rate were 3.25% and 0.31%, respectively, on December 31, 2012.

(3)	The amounts do not include interest costs. The interest rates assessed on the IRBs vary from month to month based on an index of mutual bonds. The weighted average IRB rate was 0.44% as of December 31, 2012.

(4)	Consists of (i) capital lease and other obligations of approximately $0.3 million, and (ii) a multiemployer pension fund withdrawal liability of approximately $5.4 million.

(5)

Excludes payments for unrecognized tax benefits. We believe it is reasonably possible that a decrease of up to $0.4 million in the consolidated liability for unrecognized tax benefits related to settlements of federal and state tax uncertainties may occur within the next twelve months. In addition, we believe it is reasonably possible that approximately $0.8 million of other remaining unrecognized tax benefits, each of which is individually insignificant, may be recognized within the next twelve months as a result of a lapse of the statute of limitations.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

In the normal course of our business, we are exposed to market risk, primarily from changes in interest rates and the cost of metal we hold in inventory. We continually monitor exposure to market risk and develop appropriate strategies to manage this risk. With respect to our metal purchases, there is no recognized market to purchase derivative financial instruments to reduce the inventory exposure risks. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources” for a discussion of market risk relative to steel prices.

Our exposure to market risk for changes in interest rates relates primarily to the ABL facility and the Term Loan, which are subject to variable interest rates. As of December 31, 2012, outstanding borrowings under the ABL facility were $216.3 million. Based on the weighted average borrowings outstanding on the ABL facility during the year ended December 31, 2012, a one percent increase or decrease in the weighted average facility rate would have resulted in a change to pretax interest expense of approximately $2.5 million for the period. As of December 31, 2012, outstanding borrowings under the Term Loan were $222.7 million. Because we entered into the Term Loan on December 14, 2012, a one percent increase or decrease in the interest rate on the Term Loan would not have been material for the period.

Item 8. Financial Statements and Supplementary Data

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of

Metals USA Holdings Corp.

Fort Lauderdale, Florida

We have audited the accompanying consolidated balance sheets of Metals USA Holdings Corp. and subsidiaries (the “Company”) as of December 31, 2012 and 2011, and the related consolidated statements of operations and comprehensive income, stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2012. Our audits also included the financial statement schedule listed in the Index at Item 15. These financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on the financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of Metals USA Holdings Corp. and subsidiaries as of December 31, 2012 and 2011, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2012, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

As discussed in Notes 1 and 19 to the consolidated financial statements, on February 6, 2013, Metals USA Holdings Corp., Reliance Steel & Aluminum Co. (“Reliance”) and RSAC Acquisition Corp. (a wholly-owned subsidiary of Reliance), entered into an Agreement and Plan of Merger under which Reliance has agreed to acquire Metals USA Holdings Corp.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of December 31, 2012, based on the criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 15, 2013 expressed an unqualified opinion on the Company’s internal control over financial reporting.

/s/ DELOITTE & TOUCHE LLP

Certified Public Accountants

Boca Raton, Florida

March 15, 2013

METALS USA HOLDINGS CORP. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(in millions, except share amounts)


	December 31,
	2012			2011

Assets
Current assets:
Cash	$	15.3		$	12.1
Accounts receivable, net of allowance of $5.2 and $6.9, respectively		196.5			212.2
Inventories		432.3			402.5
Deferred income tax asset		5.3			7.9
Prepayments and other		4.9			9.4


Total current assets		654.3			644.1
Property and equipment, net		251.8			247.8
Intangible assets, net		30.1			26.6
Goodwill		54.6			52.8
Other assets		13.1			13.5


Total assets	$	1,003.9		$	984.8


Liabilities and Stockholders’ Equity
Current liabilities:
Accounts payable	$	98.1		$	110.0
Accrued liabilities		27.6			29.7
Current portion of long-term debt		2.8			1.0


Total current liabilities		128.5			140.7
Long-term debt, less current portion		448.8			467.6
Deferred income tax liability		99.2			97.1
Other long-term liabilities		17.2			22.3


Total liabilities		693.7			727.7


Commitments and contingencies
Stockholders’ equity:
Preferred stock, $0.01 par value, 10,000,000 shares authorized, none issued or outstanding at December 31, 2012 and 2011		—			—
Common stock, $0.01 par value, 140,000,000 shares authorized, 37,140,245 issued and 37,132,394 outstanding at December 31, 2012, and 37,059,236 issued and 37,058,507 outstanding at December 31, 2011		0.4			0.4
Additional paid-in capital		233.9			231.3
Retained earnings		75.6			25.1
Accumulated other comprehensive income		0.4			0.3
Treasury stock, at cost—7,851 shares at December 31, 2012 and 729 shares at December 31, 2011		(0.1	)		—


Total stockholders’ equity		310.2			257.1


Total liabilities and stockholders’ equity	$	1,003.9		$	984.8

The accompanying notes are an integral part of these consolidated financial statements.

METALS USA HOLDINGS CORP. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS

AND COMPREHENSIVE INCOME

(in millions, except per share amounts)


	Years Ended December 31,
	2012			2011			2010
Net Sales	$	1,983.6		$	1,885.9		$	1,292.1
Operating costs and expenses:
Cost of sales (exclusive of operating and delivery, and depreciation and amortization shown below)		1,530.4			1,445.7			996.7
Operating and delivery		199.3			175.7			131.9
Selling, general and administrative		113.4			108.1			81.9
Depreciation and amortization		22.7			21.2			17.8
(Gain) loss on sale of property and equipment		(0.2	)		—			0.3
Advisory agreement termination charge		—			—			3.3


Operating income		118.0			135.2			60.2
Other (income) expense:
Interest expense		36.3			36.6			38.9
Loss on extinguishment of debt		6.3			—			3.5
Other (income) expense, net		(0.1	)		0.1			—


Income before income taxes		75.5			98.5			17.8
Provision for income taxes		22.8			33.9			6.3


Net income	$	52.7		$	64.6		$	11.5


Income per share:
Income per share—basic	$	1.42		$	1.74		$	0.34

Income per share—diluted	$	1.41		$	1.73		$	0.34


Number of common shares used in the per share calculation:
Basic		37.1			37.0			33.8

Diluted		37.4			37.3			34.1


Cash dividends per common share	$	0.06		$	—		$	—


Net income	$	52.7		$	64.6		$	11.5
Other comprehensive income (loss):
Foreign currency translation adjustments		0.1			(0.2	)		0.2
Deferred hedging gains		—			0.1			0.6

Total other comprehensive income (loss)		0.1			(0.1	)		0.8

Total comprehensive income	$	52.8		$	64.5		$	12.3

The accompanying notes are an integral part of these consolidated financial statements.

METALS USA HOLDINGS CORP. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(in millions)


	Years Ended December 31,
	2012			2011			2010
Common Stock ($0.01 Par)
Balance at beginning of period	$	0.4		$	0.4		$	0.2
Issuance of common stock		—			—			0.2

Balance at end of period	$	0.4		$	0.4		$	0.4


Additional Paid-in Capital
Balance at beginning of period	$	231.3		$	229.8		$	7.5
Stock-based compensation		2.4			1.5			1.2
Issuance of common stock		0.1			—			221.0
Other		0.1			—			0.1

Balance at end of period	$	233.9		$	231.3		$	229.8


Retained Earnings (Accumulated Deficit)
Balance at beginning of period	$	25.1		$	(39.5	)	$	(51.0	)
Dividends paid at $0.06 per share		(2.2	)		—			—
Net income		52.7			64.6			11.5

Balance at end of period	$	75.6		$	25.1		$	(39.5	)


Accumulated Other Comprehensive Income (Loss)
Foreign currency translation adjustments	$	0.1		$	(0.2	)	$	0.2
Deferred hedging gains		—			0.1			0.6

Other comprehensive income (loss), net of deferred income taxes		0.1			(0.1	)		0.8
Accumulated other comprehensive income (loss) at beginning of period		0.3			0.4			(0.4	)

Accumulated other comprehensive income at end of period	$	0.4		$	0.3		$	0.4


Treasury Stock
Balance at beginning of period	$	—		$	—		$	—
Purchase of treasury stock		(0.1	)		—			—

Balance at end of period	$	(0.1	)	$	—		$	—

The accompanying notes are an integral part of these consolidated financial statements.

METALS USA HOLDINGS CORP. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in millions)


	Years Ended December 31,
	2012			2011			2010
Cash flows from operating activities:
Net income	$	52.7		$	64.6		$	11.5
Adjustments to reconcile net income to net cash provided by (used in) operating activities:
(Gain) loss on sale of property and equipment		(0.2	)		—			0.3
Provision for bad debts		2.0			2.9			2.4
Depreciation and amortization		24.9			23.3			19.8
Loss on extinguishment of debt		6.3			—			3.5
Amortization of debt issuance costs and discounts on long-term debt		3.4			2.9			4.3
Deferred income taxes		4.4			15.4			1.1
Stock-based compensation		2.4			1.5			1.2
Excess tax benefit from stock-based compensation		(0.1	)		—			(0.1	)
Non-cash interest on PIK option		—			—			6.2
Cash payment of interest on PIK option		—			—			(23.2	)
Advisory agreement termination charge		—			—			3.3
Changes in operating assets and liabilities, net of acquisitions:
Accounts receivable		15.1			(48.6	)		(13.8	)
Inventories		(28.2	)		(93.6	)		(64.0	)
Prepayments and other		4.5			0.5			(3.0	)
Accounts payable and accrued liabilities		(15.2	)		18.6			(6.5	)
Other operating		(4.8	)		0.2			0.1

Net cash provided by (used in) operating activities		67.2			(12.3	)		(56.9	)


Cash flows from investing activities:
Sales of assets		0.4			0.3			0.7
Purchases of assets		(20.1	)		(21.8	)		(4.0	)
Acquisition costs, net of cash acquired		(17.0	)		(88.1	)		(28.0	)

Net cash used in investing activities		(36.7	)		(109.6	)		(31.3	)


Cash flows from financing activities:
Borrowings on credit facility		325.9			233.8			99.5
Repayments on credit facility		(337.3	)		(112.1	)		(68.5	)
Repayments of long-term debt		(228.3	)		(1.4	)		(146.7	)
Borrowings on term loan		222.7			—			—
Call premium on repayment of long-term debt		(4.2	)		—			—
Deferred financing costs		(4.0	)		(2.9	)		(6.8	)
Exercise of stock options		0.1			—			—
Excess tax benefit from stock-based compensation		0.1			—			0.1
Purchase of treasury stock		(0.1	)		—			—
Net proceeds from initial public stock offering		—			—			221.2
Dividends paid		(2.2	)		—			—

Net cash (used in) provided by financing activities		(27.3	)		117.4			98.8

Net increase (decrease) in cash		3.2			(4.5	)		10.6
Cash, beginning of period		12.1			16.6			6.0

Cash, end of period	$	15.3		$	12.1		$	16.6


Supplemental Cash Flow Information:
Cash paid for interest	$	34.2		$	36.0		$	59.2


Cash paid for income taxes	$	31.4		$	21.8		$	1.4


Cash received for income taxes	$	(0.9	)	$	(0.4	)	$	(16.4	)


Investments in property and equipment not paid	$	1.5		$	0.7		$	0.5

The accompanying notes are an integral part of these consolidated financial statements.

METALS USA HOLDINGS CORP. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(dollars in millions, except per share amounts)

1. Organization and Significant Accounting Policies

Description of the Business

Metals USA Holdings Corp. (“Metals USA Holdings”) and its wholly owned subsidiaries, Flag Intermediate Holdings Corporation (“Flag Intermediate”) and Metals USA, Inc. (“Metals USA”), and Metals USA’s wholly owned subsidiaries, are referred to collectively herein as the “Company,” “we” or “our.” Metals USA was acquired on November 30, 2005 by Apollo Management V L.P. (“Apollo Management” and together with its affiliated investment entities “Apollo”) (the “Apollo Merger”).

Summary of Significant Accounting Policies

Principles of Consolidation—The consolidated financial statements include the accounts of Metals USA Holdings, Flag Intermediate, and Metals USA and its subsidiaries. Intercompany accounts and transactions have been eliminated in the consolidated financial statements.

Use of Estimates and Assumptions—The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America (“GAAP”) requires management to make estimates and assumptions that affect (i) the reported amounts of assets and liabilities, (ii) the disclosure of contingent liabilities known to exist as of the date the financial statements are published, and (iii) the reported amount of net sales and expenses recognized during the periods presented. Adjustments made with respect to the use of estimates often relate to improved information not previously available. Uncertainties with respect to such estimates and assumptions are inherent in the preparation of financial statements; accordingly, actual results could differ from these estimates.

Reserves for Roofing Product Warranty Costs. Consistent with industry practice, the Company provides homeowners a manufacturer’s lifetime transferable limited warranty on its roofing products manufactured by the Building Products segment. The current warranty states that each roofing panel will be free from manufacturer’s defects in workmanship and materials for the lifetime of the original owner, or if transferred by the original owner 50 years from the date of installation. The warranty provides certain guarantees against weather and combustion, among other things. Depending on the facts and circumstances, the Company has various options for remedying product warranty claims including repair or replacement. Provisions for future warranty costs are recorded based on management’s estimates of future warranty costs, which incorporate historical trends of claims experience, sales history of products to which such costs relate, and other factors. We utilize an independent actuarial consultant to assist management in the determination of the adequacy of reserves for roofing product warranty costs. As of December 31, 2012 and 2011, $0.6 of estimated future warranty costs were classified in accrued liabilities, and $3.0 and $3.1, respectively, were classified as other long-term liabilities in the consolidated balance sheets.

Allowance for Doubtful Accounts—The determination of collectability of the Company’s accounts receivable requires management to make frequent judgments and estimates in order to determine the appropriate amount of allowance needed for doubtful accounts. The Company’s allowance for doubtful accounts is estimated to cover the risk of loss related to accounts receivable. This allowance is maintained at a level we consider appropriate based on historical and other factors that affect collectability. These factors include historical trends of write-offs, recoveries and credit losses, the careful monitoring of customer credit quality, and projected economic and market conditions. Different assumptions or changes in economic circumstances could result in changes to the allowance.

Inventories—Inventories are stated at the lower of cost or market. We conduct a lower of cost or market inventory valuation annually as of December 31 or more frequently if circumstances indicate potential write-downs. Our inventories are accounted for using a variety of methods including specific identification, average cost and the first-in first-out method of accounting. Inventory quantities are regularly reviewed and provisions for excess or obsolete inventory are recorded primarily based on our forecast of future demand and market conditions.

Valuation and Qualifying Accounts—We provide reserves for the collection of accounts receivable. The reserves for the years ended December 31, 2012, 2011 and 2010 are summarized below:


			Additions
	Balance at Beginning of Year		Charged to Costs & Expenses		Reductions			Balance at End of Year

Year Ended December 31, 2012:
Allowance for doubtful accounts	$	6.9	$	2.0	$	(3.7	)	$	5.2

Year Ended December 31, 2011:
Allowance for doubtful accounts	$	5.9	$	2.9	$	(1.9	)	$	6.9

Year Ended December 31, 2010:
Allowance for doubtful accounts	$	6.3	$	2.4	$	(2.8	)	$	5.9

Financial Derivatives—We use interest rate swap derivatives to mitigate the Company’s exposure to volatility in interest rates. The Company hedges only exposures in the ordinary course of business. As of December 31, 2012, we were a party to an interest rate swap agreement entered into by Ohio River Metal Services (“ORMS”), which we acquired in December 2010 (see Note 2), in connection with the Jeffersonville, Indiana Industrial Revenue Bonds (“IRBs”) discussed in Note 9. The notional amount under the swap corresponds to the principal amount of one of the Jeffersonville IRBs, which was $3.9 as of December 31, 2012, with a remaining term of approximately five years. The fair value of the swap liability was $0.5 and $0.6 as of December 31, 2012 and 2011, respectively, and is considered Level 2 in the Accounting Standards Codification (“ASC”) Topic 820 fair value hierarchy discussed in Note 6.

The Company accounts for its derivative instruments in accordance with Financial Accounting Standards Board (“FASB”) ASC Topic 815 “Derivatives and Hedging” (“ASC 815”), which requires all derivatives to be carried on the balance sheet at fair value and meet certain documentary and analytical requirements to qualify for hedge accounting treatment.

We do not apply hedge accounting to our outstanding interest rate swaps. We account for gains and losses on our interest rate swap derivatives based on realized and unrealized amounts. Realized gains and losses are determined by actual derivative settlements during the period. Unrealized gains and losses are based on the periodic mark to market valuation of our derivative contracts in place. Fair values of derivatives are determined from market observation or dealer quotations. Changes in the fair value of our derivative contracts are recognized in earnings during the current period, as prescribed by ASC 815.

Property and Equipment—Property and equipment is stated at cost, and depreciation is computed using the straight-line method, net of estimated salvage values, over the estimated useful lives of the assets. Expenditures for repairs and maintenance are charged to expense when incurred. Expenditures which extend the useful lives of existing equipment are capitalized and depreciated. Upon retirement or disposition of property and equipment, the cost and related accumulated depreciation are removed from the accounts and any resulting gain or loss is recognized. Leasehold improvements are capitalized and amortized over the lesser of the life of the lease or the estimated useful life of the asset.

Impairment of Long-lived Assets—Long-lived assets are comprised principally of property and equipment. We review long-lived assets for impairment whenever events or changes in circumstances indicate that the carrying amount may not be recoverable. Impairment losses are recorded on assets used in operations when indicators of impairment are present and the undiscounted cash flows to be generated by those assets are less than the carrying amount.

Goodwill—Goodwill represents the residual between the consideration transferred in a business combination and the net of the acquisition-date amounts of identifiable assets acquired and liabilities assumed measured at fair value. We use estimates and judgments to measure the fair value of identifiable assets acquired and liabilities assumed.

Goodwill is tested for impairment on an annual basis as of October 31 and, when specific circumstances may be present, between annual tests. We test for impairment by first making a qualitative assessment of whether it is more likely than not that a reporting unit’s fair value is less than its carrying amount. If we conclude that it is more likely than not that the fair value of a reporting unit is less than its carrying amount, we proceed to the two-step impairment test. The first step compares the fair value of a reporting unit with its carrying value, including goodwill. If the carrying value of the reporting unit exceeds its fair value, we proceed to the second step, which is to compare the implied fair value of the reporting unit goodwill to its carrying value. Any excess of the reporting unit goodwill carrying value over the respective implied fair value would be recognized as an impairment loss.

We determine the fair value of our reporting units based on a weighting of the income and market approaches. Under the income approach, we calculate the fair value of a reporting unit based on the present value of estimated future cash flows. Under the market approach, we estimate fair value based on market multiples of earnings for comparable companies.

Our October 31, 2012 annual review of goodwill indicated that goodwill was not impaired.

Intangible Assets—Management estimates of the fair value of intangible assets are based on various techniques, including the discounted value of estimated future cash flows over the life of the asset being evaluated, which is corroborated by external appraisal information. Adjustments to management’s valuations may be recorded in certain circumstances where, in the opinion of management, appraisal information may be more reflective of current appraisal techniques or may be more representative of the specific attributes of the business or assets for which the independent valuation is being performed.

We evaluate the recoverability of identifiable intangible assets whenever events or changes in circumstances indicate that an intangible asset’s carrying amount may not be recoverable. Such circumstances could include, but are not limited to: (i) a significant decrease in the market value of an asset, (ii) a significant adverse change in the extent or manner in which an asset is used, or (iii) an accumulation of costs significantly in excess of the amount originally expected for the acquisition of an asset. We measure the carrying amount of the asset against the estimated undiscounted future cash flows associated with it. Should the sum of the expected future net cash flows be less than the carrying value of the asset being evaluated, an impairment loss would be recognized. The impairment loss would be calculated as the amount by which the carrying value of the asset exceeds its fair value. The estimate of fair value is based on various valuation techniques, including the discounted value of estimated future cash flows over the life of the asset being evaluated.

Debt Issuance Costs—We defer certain expenses incurred to obtain debt financing and amortize these costs to interest expense over the term of the respective agreements using the straight-line method which approximates the effective interest method.

Taxes Collected from Customers—ASC Topic 605, Taxes Collected from Customers and Remitted to Governmental Authorities, addresses the income statement presentation of any tax collected from customers and remitted to a government authority and provides that the presentation of taxes on either a gross basis or a net basis is an accounting policy decision that should be disclosed. The Company’s policy is to present revenues net of sales taxes.

Foreign Currency Translation—The functional currency for our Canadian subsidiary, Allmet, is the Canadian dollar. We translate the functional currency into U.S. dollars based on the current exchange rate at the end of the period for the balance sheet and a weighted average rate for the period on the statement of operations. The resulting translation adjustments are recorded in Accumulated Other Comprehensive Income (Loss), a component of Stockholders’ Equity.

Accumulated Other Comprehensive Income (Loss)—Accumulated other comprehensive income consists of foreign currency translation adjustments, net of tax, in the amount of $0.4 and $0.3 as of December 31, 2012 and 2011, respectively.

Revenue recognition—We recognize revenues generally when products are shipped and our significant obligations have been satisfied. Shipping and handling costs billed to our customers are accounted for as revenues. Risk of loss for products shipped generally passes at the time of shipment. Provisions are made currently for estimated returns.

Cost of sales—Our Plates and Shapes and Flat Rolled and Non-Ferrous Groups classify, within cost of sales, the underlying commodity cost of metal purchased in mill form, the cost of inbound freight charges together with third-party processing cost, if any.

Cost of sales with respect to our Building Products Group includes the cost of raw materials, manufacturing labor and overhead costs, together with depreciation and amortization expense associated with property, buildings and equipment used in the manufacturing process.

Operating and delivery expenses—Our operating and delivery expense reflects the cost incurred by our Plates and Shapes and Flat Rolled and Non-Ferrous Groups for labor and facility costs associated with the value-added metal processing services that we provide. With respect to our Building Products Group, operating costs are associated with the labor and facility costs attributable to the warehousing of our finished goods at our service center facilities. Delivery expense reflects labor, material handling and other third-party costs incurred with the delivery of product to customers.

Delivery expense totaled $56.2, $50.3, and $36.8 for the years ended December 31, 2012, 2011, and 2010, respectively.

Selling, general and administrative expenses—Selling, general and administrative expenses include sales and marketing expenses, executive officers’ compensation, office and administrative salaries, insurance, accounting, legal, computer systems, and professional services costs not directly associated with the processing, manufacturing, operating or delivery costs of our products.

Depreciation and amortization—Depreciation and amortization expense represents the costs associated with property, buildings and equipment used throughout the Company except for depreciation and amortization expense associated with the manufacturing assets employed by our Building Products Group, which is included within cost of sales. This caption also includes amortization of intangible assets.

Income taxes—Deferred income taxes are recognized for the future tax consequences of differences between the tax bases of assets and liabilities and their financial reporting amounts based on enacted tax laws and statutory tax rates applicable to the periods in which the differences are expected to affect taxable income. Valuation allowances are established when necessary to reduce deferred tax assets to the amount that is more likely than not to be realized. We consider future taxable income and ongoing tax planning strategies in assessing the need for a valuation allowance.

New Accounting Pronouncements

In June 2011, the FASB issued Accounting Standards Update (“ASU”) No. 2011-05 Comprehensive Income (Topic 220): Presentation of Comprehensive Income (“ASU 2011-05”), which amends some of the guidance in ASC Topic 220 “Comprehensive Income” regarding how companies must present comprehensive income. The main provisions of ASU 2011-05 provide that an entity that reports items of other comprehensive income has the option to present comprehensive income in either a single statement or two separate statements. A single statement would contain the components of net income and total net income, the components of other comprehensive income and total other comprehensive income, and a total for all comprehensive income. In a two-statement approach, an entity must present the components of net income and total net income in the first statement. That statement must be immediately followed by a financial statement that presents the components of other comprehensive income, a total for other comprehensive income, and a total for all comprehensive income. The ASU is intended to increase the prominence of other comprehensive income in financial statements and to facilitate convergence of U.S. GAAP and International Financial Reporting Standards. The amendments in ASU 2011-05 are to be applied retrospectively. For public entities, the ASU is effective for fiscal years and interim periods within those years beginning after December 15, 2011. The Company adopted ASU 2011-05 within its condensed consolidated financial statements in the first quarter of 2012. ASU 2011-05 impacts presentation only and has no effect on the Company’s financial condition, results of operations, or cash flows.

2. Acquisitions

Gregor Technologies

On March 12, 2012, we acquired all of the issued and outstanding membership interests of Gregor Technologies, LLC and an affiliated company (“Gregor”) for $17.0. The purchase was funded with borrowings under our $500.0 amended and restated senior secured asset-based credit facility due 2015 (the “ABL facility”) and $3.0 of the purchase price was placed in escrow to secure seller’s indemnity obligations with respect to certain representations and warranties.

Established in 1989, Gregor provides custom-crafted parts and assemblies to original equipment manufacturers in several end markets, including industrial equipment, manufacturing, scientific instruments, electronics, aerospace, homeland security and defense. Gregor operates a 70,000 square foot metal processing facility in Torrington, Connecticut. We believe the acquisition will broaden our participation in both new and existing end markets with Gregor’s value-added processing and service offerings.

The excess of the aggregate purchase price over the estimated fair value of the net assets acquired was $3.3, which was allocated to goodwill. Goodwill arising from the acquisition consists largely of the synergies and economies of scale expected from combining the operations of Metals USA and Gregor. The Gregor acquisition was a taxable business combination and as such, the entire amount of goodwill recognized is expected to be deductible for income tax purposes. All of the goodwill was assigned to the Company’s Flat Rolled and Non-Ferrous Segment (see Note 5). The customer list intangible asset will be amortized on an accelerated basis over fifteen years based on its estimated useful life.

In connection with management’s preliminary valuation, $0.6 was reclassified from intangible assets to goodwill during the second quarter of 2012 (see Note 5 for further discussion of Gregor’s intangible assets), and $0.9 was reclassified from goodwill to inventory during the third quarter of 2012. The following table presents the allocation of the acquisition cost to the assets acquired and liabilities assumed, based on their estimated fair values:


Accounts receivable, trade	$	1.4
Inventories		1.6
Property and equipment		3.6
Customer list intangible assets		6.1
Trade name intangible assets		0.5
Technology intangible assets		1.3
Goodwill		3.3


Total assets acquired		17.8


Accounts payable and accrued liabilities		0.8


Total liabilities assumed		0.8


Net assets acquired	$	17.0

Results for the year ended December 31, 2012 include operating results from the Gregor acquisition from the date of the acquisition closing. Gregor contributed $9.2 of incremental sales and $1.3 of incremental operating income for the year ended December 31, 2012. Acquisition-related costs for the year ended December 31, 2012 amounted to approximately $0.6 and are included in selling, general and administrative expenses in the Company’s consolidated statement of operations and comprehensive income.

The pro forma effects of the Gregor acquisition would not have been material to our results of operations for the year ended December 31, 2012 and therefore are not presented.

The Richardson Trident Company

On March 11, 2011, we acquired all of the issued and outstanding stock of The Richardson Trident Company (“Trident”). Trident’s results of operations have been included in the consolidated statements of operations and comprehensive income since the date of acquisition. Trident is a general line metal service center with fabricating capabilities designed to service the oil and gas industry, and is also a wholesale distributor of metals, plastics and electronic parts. Trident operates under The Richardson Trident Company and The Altair Company trade names. Trident’s principal facility is in Richardson, Texas with branch locations in Houston, and Odessa, Texas; Tulsa, Oklahoma; Los Angeles, California; Boston, Massachusetts and Thomasville, Georgia. The Company paid $90.4 in cash for the stock of Trident, which included $54.2 for the repayment of Trident debt, and $1.8 in the form of a note payable, for a total purchase price of $92.2. The purchase was funded with borrowings under the ABL facility.

The excess of the aggregate purchase price over the estimated fair value of the net assets acquired was $8.3, which was allocated to goodwill. Goodwill arising from the acquisition consists largely of the synergies and economies of scale expected from combining the operations of Metals USA and Trident. All of the goodwill was assigned to the Company’s Flat Rolled and Non-Ferrous Segment. The Trident acquisition was a taxable business combination and as such, the entire amount of the goodwill recognized is expected to be deductible for income tax purposes. The customer list intangible asset will be amortized on an accelerated basis over twelve years based on its estimated useful life.

The following table presents the allocation of the acquisition cost to the assets acquired and liabilities assumed, based on their estimated fair values:


Cash	$	2.2
Accounts receivable, trade		17.2
Inventories		18.1
Other current assets		0.1
Property and equipment		47.8
Customer list intangible asset		19.0
Trade name intangible asset		3.3
Goodwill		8.3


Total assets acquired		116.0


Accounts payable and accrued liabilities		23.8
Note payable		1.8


Total liabilities assumed		25.6


Net assets acquired	$	90.4

Results for the year ended December 31, 2011 include operating results from the Trident acquisition from the date of the acquisition closing, which occurred on March 11, 2011. Trident contributed $132.4 of incremental sales and $9.1 of incremental operating income for the year ended December 31, 2011. Acquisition-related costs for the year ended December 31, 2011 amounted to approximately $1.6 million, which are included in selling, general and administrative expenses in the Company’s consolidated statement of operations and comprehensive income.

Trident provides a broad range of metals and processing services with a product mix that emphasizes aluminum, stainless steel and nickel. The majority of Trident’s customer base operates in the oil and gas services sector. Trident also serves customers in the aerospace, defense and transportation industries. Processing services include precision sawing, boring, honing, slitting, sheeting, shearing and turning. Trident also offers supply chain solutions such as just-in-time delivery and value-added components required by original equipment manufacturers. As a result of the acquisition, we have increased our non-ferrous and value-added processing product and service offerings in the geographic areas and end markets that Trident currently serves.

The following unaudited pro forma information presents our consolidated results of operations as if the Trident acquisition had occurred on January 1, 2010, after the effect of certain adjustments, including increased depreciation expense resulting from recording fixed assets at fair value, interest expense on the acquisition debt, amortization of certain identifiable intangible assets, severance costs for certain Trident employees that were terminated as of the acquisition date, certain other non-recurring costs, and a provision for income taxes for Trident, which was previously treated as an S corporation.


	Years Ended December 31,
	2011		2010
Net sales	$	1,911.7	$	1,440.6
Net income	$	64.8	$	19.0
Income per share—basic	$	1.75	$	0.56
Income per share—diluted	$	1.74	$	0.56

Ohio River Metal Services

On December 31, 2010, we acquired all of the issued and outstanding stock of ORMS, located in Jeffersonville, Indiana. The results of operations of ORMS have been included in the consolidated statements of operations and comprehensive income since the date of acquisition. ORMS operates a flat rolled metal service center that provides metal products and processing services to customers throughout the Ohio River Valley area. The purchase price for ORMS was $17.9, including the assumption of $8.4 of long-term debt, and was funded with borrowings under the ABL facility. The excess of the aggregate purchase price over the estimated fair value of the net assets acquired was $0.4, which was allocated to goodwill. The following table presents the allocation of the acquisition cost to the assets acquired and liabilities assumed, based on their estimated fair values:


Cash	$	0.5
Accounts receivable, trade		2.6
Inventories		4.9
Other current assets		0.1
Property and equipment		18.3
Fulfillment contract intangible asset		0.8
Goodwill		0.4


Total assets acquired		27.6


Accounts payable and accrued liabilities		5.7
Long-term debt		8.4
Interest rate swaps		0.6
Deferred tax liabilities		3.3
Other noncurrent liabilities		0.1


Total liabilities assumed		18.1


Net assets acquired	$	9.5

The fulfillment contract intangible asset will be amortized on a straight-line basis over fifteen years based on its estimated useful life. The pro forma effects of the ORMS acquisition would not have been material to our results of operations for the year ended December 31, 2010, and therefore are not presented.

J. Rubin & Co.

On June 28, 2010, we acquired all of the issued and outstanding stock of J. Rubin & Co. (“J. Rubin”) for $19.0. J. Rubin’s results of operations have been included in the consolidated statements of operations and comprehensive income since the date of acquisition. J. Rubin is a metal service center business that operates in Illinois, Wisconsin and Minnesota with a broad product mix consisting of carbon steel bars, carbon plate and laser-cut flat-rolled products. J. Rubin’s product mix and processing services are provided to a diverse range of end markets. The purchase price was funded with existing cash, $17.8 of which was paid at closing and $1.2 of which was placed in escrow to secure the sellers’ indemnity obligations. The purchase price included $6.0 for the repayment of J. Rubin debt at closing. The excess of the aggregate purchase price over the estimated fair value of the net assets acquired was $3.5, which was allocated to goodwill. The following table presents the allocation of the acquisition cost to the assets acquired and liabilities assumed, based on their estimated fair values:


Accounts receivable, trade	$	3.8
Inventories		5.8
Other current assets		0.2
Property and equipment		9.7
Customer list intangible asset		2.0
Goodwill		3.5


Total assets acquired		25.0


Accounts payable and accrued liabilities		2.5
Deferred tax liabilities		3.5


Total liabilities assumed		6.0


Net assets acquired	$	19.0

The customer list intangible asset is being amortized on an accelerated basis over ten years based in its estimated useful life. The pro forma effects of the J. Rubin acquisition would not have been material to our results of operations for the year ended December 31, 2010, and therefore are not presented.

3. Inventories

Inventories consist of the following:


	December 31,
	2012		2011
Raw materials—
Plates and Shapes	$	165.0	$	151.4
Flat Rolled and Non-Ferrous		215.6		198.5
Building Products		5.8		4.7


Total raw materials		386.4		354.6


Work-in-process and finished goods—
Flat Rolled and Non-Ferrous		36.3		38.8
Building Products		9.6		9.1


Total work-in-process and finished goods		45.9		47.9


Total inventories	$	432.3	$	402.5

4. Property and Equipment

Property and equipment consists of the following:


	Estimated		December 31,
	Useful Lives		2012			2011

Land		—	$	15.6		$	15.5
Buildings and improvements		3-40 years		117.5			114.3
Machinery and equipment		2-25 years		201.5			188.3
Automobiles and trucks		3-15 years		2.9			3.0
Construction in progress		—		18.1			12.9


Total property and equipment				355.6			334.0
Less: Accumulated depreciation				(103.8	)		(86.2	)


Total property and equipment, net			$	251.8		$	247.8

Depreciation expense for the years ended December 31, 2012, 2011 and 2010 was $18.4, $18.2, and $14.0, respectively. These amounts do not include depreciation for our Building Products Group that is included in cost of sales which amounted to $2.1, $2.1, and $2.0 for the years ended December 31, 2012, 2011, and 2010, respectively.

5. Goodwill and Intangible Assets

The changes in the carrying amounts of goodwill by segment for the years ended December 31, 2012 and 2011 are as follows:


	As of December 31, 2011			Acquisitions/ Purchase Accounting Adjustments		Realization of Tax Benefits/Other			As of December 31, 2012
Plates and Shapes
Gross Goodwill and Carrying Amount of Goodwill	$	14.5		$	—	$	(0.2	)	$	14.3

Flat Rolled and Non-Ferrous
Gross Goodwill and Carrying Amount of Goodwill		32.7			3.3		—			36.0

Building Products
Gross Goodwill and Carrying Amount of Goodwill		2.2			—		—			2.2

Corporate
Gross Goodwill		7.6			—		(1.3	)		6.3
Impairments		(4.2	)		—		—			(4.2	)

Carrying Amount of Goodwill		3.4			—		(1.3	)		2.1

Consolidated Total
Gross Goodwill		57.0			3.3		(1.5	)		58.8
Impairments		(4.2	)		—		—			(4.2	)

Carrying Amount of Goodwill	$	52.8		$	3.3	$	(1.5	)	$	54.6


	As of December 31, 2010			Acquisitions/ Purchase Accounting Adjustments		Realization of Tax Benefits/Other			As of December 31, 2011
Plates and Shapes
Gross Goodwill and Carrying Amount of Goodwill	$	14.9		$	—	$	(0.4	)	$	14.5

Flat Rolled and Non-Ferrous
Gross Goodwill and Carrying Amount of Goodwill		24.4			8.3		—			32.7

Building Products
Gross Goodwill and Carrying Amount of Goodwill		2.2			—		—			2.2

Corporate
Gross Goodwill		10.0			—		(2.4	)		7.6
Impairments		(4.2	)		—		—			(4.2	)

Carrying Amount of Goodwill		5.8			—		(2.4	)		3.4

Consolidated Total
Gross Goodwill		51.5			8.3		(2.8	)		57.0
Impairments		(4.2	)		—		—			(4.2	)

Carrying Amount of Goodwill	$	47.3		$	8.3	$	(2.8	)	$	52.8

Additions to goodwill recorded for the Flat Rolled and Non-Ferrous segment for the year ended December 31, 2012 are attributable to the Gregor acquisition, which closed on March 12, 2012, discussed in Note 2. Reductions to goodwill for the Corporate and Plates and Shapes segments for the year ended December 31, 2012 are primarily attributable to accounting for tax benefits associated with tax-deductible goodwill recognized in connection with the Apollo Merger and the acquisition of Port City Metal Services, which were taxable business combinations.

Additions to goodwill recorded at the Flat Rolled and Non-Ferrous segment for the year ended December 31, 2011 are attributable to the Trident acquisition, which closed on March 11, 2011, discussed in Note 2. Reductions to goodwill for the Corporate and Plates and Shapes segments for the year ended December 31, 2011 are primarily attributable to accounting for tax benefits associated with tax-deductible goodwill recognized in connection with the Apollo Merger and the acquisition of Port City Metal Services, which were taxable business combinations.

We test for goodwill impairment annually at the reporting unit level using a fair value approach. We use the present value of future cash flows to determine fair value in combination with the market approach. While we believe that our key assumptions and estimates are consistent with those a hypothetical market participant would use given circumstances that are present at the time the estimates are made, future operating results could reasonably differ from our estimates and could require a provision for impairment in a future period. No impairments were recognized for the years ended December 31, 2012, 2011 or 2010.

The carrying amounts of the Company’s intangible assets are as follows:


	December 31,			December 31,
	2012			2011

Customer lists	$	67.8		$	61.7
Less: Accumulated amortization		(45.1	)		(41.4	)

	$	22.7		$	20.3


Trade names	$	7.1		$	6.6
Less: Accumulated amortization		(1.6	)		(1.1	)

	$	5.5		$	5.5


Technology	$	1.3		$	—
Less: Accumulated amortization		(0.1	)		—

	$	1.2		$	—


Fulfillment contract	$	0.8		$	0.8
Less: Accumulated amortization		(0.1	)		—

	$	0.7		$	0.8

During the year ended December 31, 2012, we acquired $6.1 of customer list intangible assets, $0.5 of trade name intangible assets, and $1.3 of technology intangible assets as a result of the Gregor acquisition discussed in Note 2.

During the year ended December 31, 2011, we acquired $19.0 of customer list intangible assets and $3.3 of trade name intangible assets as a result of the Trident acquisition discussed in Note 2.

During the year ended December 31, 2010, we acquired $2.0 of customer list intangible assets as a result of the J. Rubin acquisition discussed in Note 2. We became a party to a fulfillment contract in connection with our acquisition of ORMS on December 31, 2010, the value of which was estimated at $0.8.

No significant residual value is estimated for our intangible assets. Aggregate amortization of intangible assets for the years ended December 31, 2012, 2011 and 2010 was $4.4, $3.0, and $3.8, respectively.

Remaining aggregate amortization of our intangible assets is as follows:


For the Year Ending December 31,	Estimated Amortization Expense

2013	$	4.5
2014	$	4.2
2015	$	3.8
2016	$	3.3
2017	$	3.0
Thereafter	$	11.3

6. Fair Value Measurements

ASC Topic 820 “Fair Value Measurements and Disclosures” (“ASC 820”) defines fair value as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. ASC 820 classifies the inputs used to measure fair value into the following hierarchy:

Level 1—Quoted prices in active markets for identical assets or liabilities.

Level 2—Observable inputs other than Level 1 prices such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities.

Level 3—Unobservable inputs that are supported by little or no market activity, but which are significant to the fair value of the assets or liabilities as determined by market participants.

There were no transfers between Levels 1, 2, or 3 during the years ended December 31, 2012, 2011, and 2010.

As of December 31, 2012, the Company held certain items that are required to be measured at fair value on a recurring basis. Our receivables, payables, prepayments and accrued liabilities are current assets and obligations and, accordingly, the recorded values are believed by management to approximate fair value. The fair value of the Company’s debt that is fixed-rate is estimated by discounting the interest payments and principal amount at the Company’s current borrowing rate (yield to maturity). For floating rate debt, fair value is not sensitive to interest rates since coupons float with Treasury or London Interbank Offered Rate (“LIBOR”) yields, and book value is a reasonable approximation of fair value after considering the stability of the Company’s default risk. The fair value of the Company’s debt is considered Level 2 in the ASC 820 fair value hierarchy. The estimated fair value of current and long-term debt at December 31, 2012 and December 31, 2011 was $451.5 and $476.4, respectively.

7. Other Assets

Other assets consist of the following:


	December 31,
	2012		2011

Deferred financing costs	$	7.1	$	9.7
Deferred debt offering costs		3.9		2.8
Other		2.1		1.0


Total other assets	$	13.1	$	13.5

We incurred $4.0 of deferred debt offering costs during 2012 in connection with the completion of our new term loan financing and redemption of our 11 1/8% Senior Secured Notes due 2015 (the “Metals USA Notes”) discussed in Note 9. We incurred $2.9 of additional deferred financing costs during 2011 in connection with the amendment of the ABL facility discussed in Note 9. We incurred $6.8 of additional deferred financing costs during 2010 in connection with the amendment and restatement of the ABL facility discussed in Note 9.

Amortization of debt issuance costs for the years ended December 31, 2012, 2011 and 2010 was $3.4, $2.9 and $4.1, respectively. For the year ended December 31, 2012, $2.1 of deferred debt offering costs were written off in connection with the extinguishment of the Metals USA Notes discussed in Note 9. For the year ended December 31, 2010, $1.1 of deferred debt issuance cost was accelerated in connection with the extinguishment of debt. In addition, $0.5 of deferred financing cost was written off in connection with the amendment and restatement of the ABL facility in December 2010.

8. Accrued Liabilities

Accrued liabilities consist of the following:


	December 31,
	2012		2011
Salaries and employee benefits	$	13.3	$	15.1
Income taxes		—		1.0
Taxes, other than income		2.8		3.4
Interest		1.2		2.6
Insurance		4.5		4.2
Audit and tax fees		0.9		0.7
Warranty liability		0.6		0.6
Lease terminations		0.4		0.2
Other		3.9		1.9


Total accrued liabilities	$	27.6	$	29.7

9. Debt

Debt consists of the following:


	December 31,
	2012		2011

Senior Secured Asset-Based Revolving Credit Facility (ABL facility)	$	216.3	$	227.7
Senior Secured Term Loan (Term Loan)		222.7		—
11¹/₈% Senior Secured Notes due 2015 (Metals USA Notes)		—		226.3
Industrial Revenue Bonds (IRBs)		12.3		12.6
Capital lease and other obligations		0.3		2.0


Total debt		451.6		468.6
Less—current portion of debt		2.8		1.0


Total long-term portion of debt	$	448.8	$	467.6

The weighted average interest rate under the ABL facility for the years ended December 31, 2012 and 2011 was 2.45% and 2.77%, respectively.

Senior Secured Asset-Based Revolving Credit Facility

On December 17, 2010, Flag Intermediate, Metals USA, and certain subsidiaries of Metals USA entered into an amended and restated loan and security agreement (the “ABL Credit Agreement”) with the lenders party thereto and Bank of America, N.A., as administrative agent and collateral agent. Flag Intermediate and Metals USA are wholly-owned subsidiaries of Metals USA Holdings Corp. The ABL Credit Agreement provides for borrowings of up to $500.0 of Tranche A commitments and $35.0 of first-in, last-out (“FILO”) Tranche A-1 commitments (which may be increased up to $750.0 at the option of Metals USA, including $35.0 under the FILO tranche), under the 5-year, senior secured ABL facility that amended and restated Metals USA’s then-existing $625.0 senior secured asset-based credit facility that was scheduled to mature on November 30, 2011.

On March 9, 2011, we activated $25.0 of the FILO tranche under the ABL facility. The ABL facility permits us to borrow on a revolving basis through the earlier of November 30, 2015 and 60 days prior to the scheduled maturity of the Metals USA Notes, unless the Metals USA Notes are refinanced to a date more than 5 years and 60 days after the closing date of the ABL facility and/or repaid prior to such date. Substantially all of our subsidiaries are borrowers under the ABL facility.

On August 10, 2011, we amended the ABL facility by reducing the borrowing costs on the Tranche A commitments by 75 basis points and reducing the borrowing costs on the FILO tranche by 62.5 basis points. Under the amendment, the maturity date of the ABL facility was extended to the earlier of August 10, 2016 or 60 days prior to the scheduled maturity of the Metals USA Notes, unless the Metals USA Notes are refinanced to a date more than 5 years and 60 days after the closing date of the ABL facility and/or repaid prior to such date.

As noted below, all of the Metals USA Notes were redeemed in December 2012, and the ABL facility maturity date is August 10, 2016.

•

85% of the net amount of eligible accounts receivable, plus

•

the lesser of (x) 80% of the lesser of the original cost or market value of eligible inventory and (y) 90% of the net orderly liquidation value of eligible inventory, plus

•

The ABL facility provides sub-limits for up to $25.0 of swingline loans and up to $100.0 for the issuance of letters of credit. Both the face amount of any outstanding letters of credit and any swingline loans will reduce borrowing availability under the ABL facility on a dollar-for-dollar basis.

As of December 31, 2012, we had $428.9 of eligible collateral, $216.3 in outstanding advances, $18.3 in open letters of credit and $194.3 of additional borrowing capacity. As of December 31, 2012, we had $15.3 of cash on hand.

Certain Conditions Precedent and Covenants. As a condition precedent to any borrowing or issuance of a letter of credit, a material adverse effect shall not have occurred or exist. The ABL facility contains customary representations, warranties and covenants, including limitations on our ability to incur or guarantee additional debt, subject to certain exceptions, pay dividends, or make redemptions and repurchases, with respect to capital stock, repay debt, create or incur certain liens, make certain loans or investments, make acquisitions or investments, engage in mergers, acquisitions, asset sales, and engage in certain transactions with affiliates. The ABL facility requires a lock-box arrangement for collection of accounts receivable and proceeds from sales of inventory. Metals USA may make withdrawals from the lock-box unless an event of default exists or borrowing availability is less than the greater of (i) $50.0 and (ii) 12.5% of the lesser of (A) the borrowing base (not to exceed $62.5) and (B) the aggregate commitment. We do not have to maintain a minimum FCCR as long as our borrowing availability is greater than or equal to the greater of (i) $45.0 and (ii) 10% of the lesser of the borrowing base and the aggregate commitment (the “Minimum Availability”). We must maintain an FCCR of at least 1.0 to 1.0 if borrowing availability falls below the Minimum Availability. For purposes of determining covenant compliance, the FCCR is determined by dividing (i) the sum of Adjusted EBITDA (as defined in the ABL Credit Agreement) minus income taxes paid in cash (excluding certain specified deferred taxes) minus non-financed capital expenditures by (ii) the sum of certain distributions paid in cash, cash interest expense and scheduled principal reductions on debt, and

is calculated based on such amounts for the most recent period of four consecutive fiscal quarters for which financial statements are available. FCCR and Adjusted EBITDA are each calculated on a pro forma basis. As of December 31, 2012, our FCCR was 2.44. We were in compliance with all financial covenants as of December 31, 2012.

Certain Events of Default and Remedies. The ABL facility contains events of default with respect to: default in payment of principal when due, default in the payment of interest, fees or other amounts after a specified grace period, material breach of the representations or warranties, default in the performance of covenants, a default that causes or permits acceleration under any indebtedness with a principal amount in excess of a specified amount, certain bankruptcy events, certain ERISA violations, invalidity of certain security agreements or guarantees, material judgments, or a change of control. In the event of default, the ABL Credit Agreement may permit a majority of the lenders to: (i) restrict the amount of or refuse to make revolving loans; (ii) cause customer receipts to be applied against borrowings under the ABL facility which would cause Metals USA to suffer a rapid loss of liquidity and restrict the ability to operate on a day-to-day basis; (iii) restrict or refuse to provide letters of credit; or ultimately: (iv) terminate the commitments and the agreement; or (v) declare any or all obligations to be immediately due and payable if such default is not cured in the specified period required. Any payment default or acceleration under the ABL facility would also result in a default under the Metals USA Notes that would provide the holders of the Metals USA Notes with the right to demand immediate repayment.

Costs related to the establishment of the ABL facility, in addition to subsequent amendments to the ABL facility, were capitalized and are being charged to interest expense over the life of the ABL facility. Unamortized financing costs of $7.1 and $9.7 were included in other non-current assets as of December 31, 2012 and 2011, respectively.

Senior Secured Term Loan

On December 14, 2012, Flag Intermediate and Metals USA entered into a Senior Secured Term Loan Credit Agreement (the “Term Loan Agreement”) with certain lenders and Credit Suisse AG, as administrative agent. The Term Loan Agreement provides for a new seven year senior secured term loan to Metals USA in the amount of $225 million (the “Term Loan”). The Term Loan will amortize in equal quarterly installments during its term, commencing on March 31, 2013, in an aggregate annual amount equal to 1.00% of the original principal amount of the Term Loan with the remainder due at maturity. The Term Loan bears interest, at Metals USA’s election, at an annual rate of either (i) the greater of a base rate and 2.25%, plus a margin of 4.00% or (ii) the greater of LIBOR and 1.25%, plus a margin of 5.00%. The Term Loan was issued at an original issue discount of 1.00%. Metals USA is the borrower under the Term Loan Agreement. All of Metals USA’s obligations under the Term Loan Agreement are and will be guaranteed by Flag Intermediate and all of Metals USA’s existing and future domestic subsidiaries, except as provided in the Term Loan Agreement.

The Term Loan Agreement contains customary mandatory prepayment provisions, including a requirement to, subject to certain exceptions, prepay the Term Loan using (i) 100% of the net cash proceeds of any non-ordinary course of business asset sales that are not re-invested in the business of the Company as permitted by the Term Loan Agreement and (ii) 50% (subject to reduction to 25% or 0% if Metals USA achieves certain leverage targets) of annual excess cash flow, as defined in the Term Loan Agreement. The Term Loan Agreement permits voluntary prepayments of the Term Loan subject to certain restrictions. The Term Loan Agreement also includes customary events of default, including events of default relating to non-payment of principal, interest or fees, material inaccuracy of representations and warranties, violation of covenants, cross payment defaults, cross acceleration, a change of control (as defined in the Term Loan Agreement), bankruptcy and insolvency events, and the failure of the Intercreditor Agreement (as defined below) to remain in full force and effect. Subject to the terms and conditions of the Term Loan Agreement, if an event of default under the Term Loan Agreement occurs, the lenders will be able to accelerate the maturity of the loans outstanding under the Term Loan Agreement, together with accrued unpaid interest and other amounts owed, and exercise other rights and remedies.

In connection with the Term Loan Agreement, Flag Intermediate, Metals USA and the subsidiaries of Metals USA that guarantee the Term Loan entered into a Lien Subordination and Intercreditor Agreement effective December 14, 2012 (the “Intercreditor Agreement”). The Intercreditor Agreement governs the liens upon and security interests granted in the collateral securing both the Term Loan and the ABL facility. Under the Intercreditor Agreement, the ABL facility is secured by first priority security interests, and the Term Loan is secured by second priority security interests, in all accounts receivable, inventory and certain related assets of Flag Intermediate, Metals USA and the subsidiary guarantors. Under the Intercreditor Agreement, the Term Loan is secured by first priority security interests, and the ABL facility is secured by second priority security interests, in all other assets of Flag Intermediate, Metals USA and the subsidiary guarantors that serve as collateral for the facilities.

Costs related to the establishment of the Term Loan were capitalized and are being charged to interest expense over the life of the Term Loan. Unamortized financing costs of $3.9 were included in other non-current assets as of December 31, 2012.

11¹/₈% Senior Secured Notes Due 2015

On November 30, 2005, Flag Acquisition Corporation (“Flag Acquisition”) sold $275.0 aggregate principal amount of the Metals USA Notes. On December 14, 2012, Metals USA used the proceeds of the Term Loan, in addition to borrowings under the ABL facility, to redeem all of the Metals USA Notes, representing an aggregate principal amount of $226.3 as of the date thereof. The redemption price of the Metals USA Notes was 101% of the outstanding principal amount, plus accrued and unpaid interest thereon. The aggregate cash payment for the redemption, including unpaid interest and a call premium of $4.2, was approximately $232.6. Upon completion of the redemption, the trustee under the indenture governing the Metals USA Notes acknowledged that all of the obligations of Flag Intermediate, Metals USA and the subsidiary guarantors thereunder have been satisfied and discharged and the liens on the collateral securing the obligations relating to the Metals USA Notes have been released.

In connection with the redemption of the Metals USA Notes, $2.1 of unamortized deferred debt offering costs were written off and included in the loss on extinguishment of debt.

Industrial Revenue Bonds

Metals USA is a conduit bond obligor on IRBs issued by the municipalities of Muskogee, Oklahoma and Jeffersonville, Indiana. As of December 31, 2012, our total indebtedness under the IRBs was $12.3. The IRBs are secured by certain real estate, leasehold improvements and equipment acquired with proceeds from the IRBs. The Muskogee IRB is due in one lump sum of $5.7 on May 1, 2023. The Jeffersonville IRBs had principal amounts outstanding of $3.9 and $2.7 as of December 31, 2012, and are being redeemed in varying amounts annually through August 2021 and December 2027, respectively. The interest rates assessed on the IRBs vary from month to month. As of December 31, 2012, the weighted average interest rate on the IRBs was 0.44%. The IRBs place various restrictions on certain of our subsidiaries, including but not limited to maintenance of required insurance coverage, maintenance of certain financial ratios, limits on capital expenditures and maintenance of tangible net worth and are supported by letters of credit. We were in compliance with all financial covenants as of December 31, 2012.

Restricted Payments

Both the ABL Credit Agreement and the Term Loan Agreement contain restrictions as to the payment of dividends. Under the ABL Credit Agreement, general distributions are unlimited if the FCCR is at least 1.1:1.0 and availability (including a 30 day lookback) exceeds the greater of (i) $50.0 and (ii) 15% of the lesser of the borrowing base (not to exceed $75.0) and the aggregate commitments. As of December 31, 2012, our FCCR as defined in the ABL Credit Agreement was 2.44, and our borrowing availability was $194.3.

Senior Floating Rate Toggle Notes due 2012

On July 10, 2007, Metals USA Holdings issued $300.0 initial aggregate principal amount of Senior Floating Rate Toggle Notes due 2012 (the “2007 Notes”).

On April 14, 2010, Metals USA Holdings called for redemption of all of its remaining outstanding 2007 Notes, representing an aggregate principal amount of approximately $169.6 as of the date thereof. The redemption price of the 2007 Notes was 100% of the outstanding aggregate principal amount, plus accrued and unpaid interest thereon to but not including May 14, 2010 (the “Redemption Date”). All of the 2007 Notes were redeemed on the Redemption Date. The Company did not incur any early termination penalties in connection with the redemption of the 2007 Notes. The Company used a portion of the net proceeds from its initial public offering of common stock (the “IPO”), as described more fully in Note 11, to finance the redemption. The aggregate cash payment for the redemption, including accrued and unpaid interest, was approximately $170.9. During the second quarter of 2010, $1.1 and $2.4 of unamortized deferred financing costs and original issue discount, respectively, were written off and charged to expense in connection with the redemption of the 2007 Notes.

Maturities

Scheduled maturities of long-term debt outstanding at December 31, 2012, are as follows:


	Years Ended December 31,
	2013		2014		2015		2016		2017		Beyond
ABL facility	$	—	$	—	$	—	$	216.3	$	—	$	—
Term Loan		2.2		2.3		2.3		2.3		2.3		213.6
IRBs		0.4		0.4		0.4		0.5		0.5		10.1
Capital lease and other obligations		0.2		0.1		—		—		—		—

Total	$	2.8	$	2.8	$	2.7	$	219.1	$	2.8	$	223.7

10. Income Taxes

The components of the provision (benefit) for income taxes are as follows:


	Years Ended December 31,
	2012			2011		2010
Current provision (benefit):
Federal	$	20.1		$	15.9	$	2.9
State		(1.7	)		2.6		2.3

	$	18.4		$	18.5	$	5.2


Deferred provision (benefit):
Federal		3.4			13.8		2.8
State		1.0			1.6		(1.7	)

		4.4			15.4		1.1

Total provision	$	22.8		$	33.9	$	6.3

The components of income before income taxes are as follows:


	Years Ended December 31,
	2012		2011		2010
United States	$	75.4	$	98.5	$	18.8
Foreign		0.1		—		(1.0	)

Income before income taxes	$	75.5	$	98.5	$	17.8

The provision (benefit) differs from an amount computed at the statutory rates as follows:


	Years Ended December 31,
	2012			2011			2010
Federal income tax at statutory rates	$	26.5		$	34.5		$	6.3
State taxes, net of federal income tax benefit		1.6			4.2			0.7
Production activity deduction		(1.9	)		(2.0	)		(0.6	)
Change in valuation allowance		0.4			(0.3	)		(2.8	)
Uncertain tax positions		(2.9	)		(1.5	)		0.6
Other		(0.9	)		(1.0	)		2.1

Total provision	$	22.8		$	33.9		$	6.3

The significant items giving rise to the deferred tax assets (liabilities) are as follows:


	December 31,
	2012			2011
Deferred tax assets:
Accounts receivable and inventories	$	1.4		$	0.3
Accrued liabilities		6.8			8.3
Tax attributes and carryforwards		11.8			12.0
Other comprehensive income		(0.3	)		(0.3	)
Other		2.8			2.9

Total deferred tax assets		22.5			23.2


Deferred tax liabilities:
Property and equipment		(78.3	)		(74.6	)
Intangible assets		(0.3	)		(1.3	)
Deferred revenue		(30.4	)		(30.3	)
Other		(1.7	)		(0.9	)


Total deferred tax liabilities		(110.7	)		(107.1	)


Valuation allowance		(5.7	)		(5.3	)


Deferred tax assets (liabilities), net	$	(93.9	)	$	(89.2	)

As of December 31, 2012, we recorded both federal and state current and noncurrent net deferred tax assets/(liabilities) of $5.3 and ($99.2), respectively. As of December 31, 2011, we recorded both federal and state current and noncurrent net deferred tax assets/(liabilities) of $7.9 and ($97.1), respectively.

As of December 31, 2012, our net operating loss (“NOL”) carryforwards for U.S. federal income taxes had been fully utilized. As of December 31, 2012, we have state NOL carryforwards of $204.9 with carryforward periods ranging from five to twenty years depending on the loss jurisdiction. Our state NOL carryforwards expire between 2013 and 2029. In addition, a portion of our state NOL carryforwards are subject to the state equivalent Internal Revenue Code section 382 annual limitation as a result of changes in ownership that occurred in 2002 and 2005. We also have Canadian NOL carryforwards of $2.3 which expire between 2027 and 2029.

ASC Topic 740 “Income Taxes,” (“ASC 740”) requires that deferred tax assets be reduced by a valuation allowance, if based on the weight of available evidence, it is more likely than not that some portion or all of the deferred tax assets will not be realized. The valuation allowance is adjusted in the periods that we determine the more likely than not standard will or will not be met. A valuation allowance of $5.7 and $5.3 was recorded at December 31, 2012 and 2011, respectively, against state NOL carryforwards and Canadian net deferred tax assets. In 2012, the state NOL valuation allowance increased by $0.4.

Our tax returns are subject to periodic examination by the various taxing jurisdictions in which we operate. These examinations can result in adjustments to taxes due or adjustments to NOL carryforwards which are available to offset future income.

In 2005 in conjunction with the Apollo Merger, and in 2006 as a result of our acquisition of Port City, our carryover basis in tax deductible goodwill exceeded the corresponding book amounts. In accordance with ASC 740, a deferred tax asset for the excess was not recorded. Instead, the tax benefits from the excess amortization of tax deductible goodwill, as realized, are applied as follows: first to reduce financial statement goodwill related to the Apollo Merger/acquisition of Port City to zero, then as a reduction of noncurrent intangible assets related to the Apollo Merger/acquisition of Port City, with any excess tax benefit reducing our provision for income taxes. In the years ended December 31, 2012 and 2011, goodwill was reduced by $1.5 and $2.8, respectively.

Unrecognized Tax Benefits

As of December 31, 2012, 2011, and 2010, the total amount of unrecognized tax benefits that, if recognized, would affect our effective income tax rate was $2.3, $4.7, and $5.6, respectively.

We account for any applicable interest and penalties on uncertain tax positions as a component of income tax expense. During the year ended December 31, 2012, the accrued interest and penalties on uncertain tax positions decreased by $1.9. During the year ended December 31, 2011, the accrued interest and penalties on uncertain tax positions decreased by $0.3. During the year ended December 31, 2010, the accrued interest and penalties on uncertain tax positions increased by $0.1. The Company had $0.6 and $2.5 of interest and penalties accrued at December 31, 2012 and 2011, respectively.

We believe it is reasonably possible that a decrease of up to $0.4 in the consolidated liability for unrecognized tax benefits related to settlements of federal and state tax uncertainties may occur within the next twelve months. In addition, we believe it is reasonably possible that approximately $0.8 of other remaining unrecognized tax benefits, each of which is individually insignificant, may be recognized within the next twelve months as a result of a lapse of the statute of limitations.

We file numerous consolidated and separate income tax returns in the United States and various foreign jurisdictions. We are no longer subject to U.S. Federal income tax examinations for years before 2003 and are no longer subject to state and local, or foreign income tax examinations for years before 2001.

A reconciliation of the beginning and ending amounts of unrecognized income tax benefits for the years ended December 31, 2012, 2011 and 2010 is as follows:


	Year Ended December 31,
	2012			2011			2010
Balance at beginning of period	$	7.4		$	11.6		$	10.9
Gross increases due to tax positions in prior periods		0.4			3.7			1.4
Gross decreases due to tax positions in prior periods		(2.9	)		(4.7	)		(0.3	)
Gross increases due to tax positions in current period		0.1			—			0.4
Decreases due to lapses of statutes of limitations		(1.7	)		(3.2	)		(0.8	)

Balance at end of period	$	3.3		$	7.4		$	11.6

11. Stockholders’ Equity

Common Stock

In accordance with our amended and restated certificate of incorporation, we are authorized to issue 140,000,000 shares of common stock, $0.01 par value. At December 31, 2012, 37,140,245 shares were issued and 37,132,394 shares were outstanding. At December 31, 2011, 37,059,236 shares were issued and 37,058,507 shares were outstanding.

Preferred Stock

Also in accordance with our amended and restated certificate of incorporation, Metals USA Holdings is authorized to issue 10,000,000 shares of preferred stock, $0.01 par value. At December 31, 2012 and 2011, no shares of preferred stock were issued and outstanding.

Treasury Stock

At December 31, 2012, 7,851 shares of the Company’s common stock were held as treasury stock at an average cost of $15.92 per share. At December 31, 2011, 729 shares of the Company’s common stock were held as treasury stock at an average cost of $15.01 per share. All such shares were used to satisfy applicable tax withholding obligations for certain participants upon vesting of restricted stock awards as described under “Restricted Stock” in Note 12 below.

Stock Split and Amended and Restated Certificate of Incorporation

On March 19, 2010, the Company’s Board of Directors approved a 1.7431-for-1 split of the Company’s common stock. The split was effected as a stock dividend on April 5, 2010. The consolidated financial statements for the year ended December 31, 2010 as presented herein give retroactive effect to the stock split. In addition, the Company’s Board of Directors approved an increase in the Company’s authorized shares of common stock from 30,000,000 to 140,000,000, pursuant to our amended and restated certificate of incorporation. The amended and restated certificate of incorporation also authorizes the issuance of 10,000,000 shares of preferred stock, $0.01 par value. Our stockholders approved the amended and restated certificate of incorporation on March 19, 2010.

Initial Public Offering of Common Stock

On April 14, 2010, Metals USA Holdings completed its IPO of 11,426,315 shares of its common stock at $21.00 per share, as described in the Company’s Registration Statement on Form S-1, as amended (File No. 333-150999). As a result of the offering, we received net proceeds of approximately $221.2, after deducting underwriting discounts and commissions of approximately $14.7 and additional offering-related expenses of approximately $4.1.

12. Stock-Based Compensation

Total stock-based compensation expense recognized for the years ended December 31, 2012, 2011 and 2010 was $2.4, $1.5, and $1.2, respectively. Stock-based compensation expense is included in our consolidated statements of operations and comprehensive income in “Selling, general and administrative expense.” Cash proceeds from stock option exercises are a component of financing cash flows from continuing operations. Cash received from stock option exercises amounted to $0.1 for the year ended December 31, 2012, while the actual tax benefit realized for the tax deduction from these stock option exercises, as well as restricted stock awards that vested, was $1.1. Stock option exercises, restricted stock vesting and the related tax benefits realized during the years ended December 31, 2011 and 2010 were not material.

2005 Stock and Incentive Plan

Metals USA Holdings’ Amended and Restated 2005 Stock and Incentive Plan (the “2005 Plan”) permits the issuance of options and restricted stock awards to employees and directors of the Company. The Plan has reserved for issuance up to 2.4 million shares of common stock. The Plan has two tranches of options, Tranche A and Tranche B. Tranche A options vest on a pro-rata basis over five years, have a term of ten years, and expire if not exercised. Tranche B options, which include both a service and a performance condition, vest on the eighth anniversary of the date of grant or earlier dependent on the satisfaction of an internal rate of return on capital invested, have a term of ten years from date of grant, and expire if not exercised.

2010 Long-Term Incentive Plan

In March 2010 our Board of Directors adopted, and our stockholders approved, the Metals USA Holdings 2010 Long-Term Incentive Plan (the “2010 Plan”). The purposes of the 2010 Plan are to further the growth and success of Metals USA and to reward and incentivize the outstanding performance of our key employees, directors, consultants and other service providers by aligning their interests with those of stockholders through equity-based compensation and enhanced opportunities for ownership of shares of our common stock.

Subject to adjustment, the 2010 Plan authorizes the issuance of up to 2.6 million shares of common stock pursuant to the grant or exercise of nonqualified stock options, incentive stock options, stock appreciation rights, restricted stock, restricted stock units and other equity-based awards.

The 2010 Plan is administered by our Board of Directors or the Compensation Committee thereof, or such other committee of the Board of Directors as the Board of Directors may designate from time to time (the “Committee”). Among other things, the Committee has the authority to select individuals to whom awards may be granted, to determine the type of award, to determine the terms and conditions of any such awards, including vesting terms, to interpret the terms and provisions of the 2010 Plan and awards granted thereunder and to otherwise administer the plan.

Stock Options

The exercise price of stock option awards is equal to the closing market price on the grant date or the closing market price on the day previous to the grant date, as determined at the time of the grant. The Company generally issues additional shares to satisfy stock option exercises. We use the Black-Scholes option valuation model to estimate the fair value of our stock options. Valuation assumptions are as follows:

•

Expected Volatility—Expected volatility for option grants was determined based on historical trading data for peer companies over the options’ expected terms, since the Company’s historical trading data is limited to the period subsequent to our April 2010 IPO.

•

Expected Term—The expected term of our options is the anticipated time period between the grant date and the exercise or post-vesting cancellation date, and falls between the options’ vesting and contractual expiration dates.

•

Risk-Free Rate—The risk-free rate is the yield on the grant date of a zero-coupon U.S. Treasury bond whose maturity period equals the options’ expected term.

•

Expected Dividend Yield—The dividend yield assumption reflects the Company’s historical dividend yield adjusted for management’s expectations for any future dividend yields at the grant date. Our assumption reflected no dividends.

The fair value of stock options is estimated on the grant date. The following is a summary of valuation assumptions and grant-date fair values for stock option grants during the years ended December 31, 2012 and 2010. There were no stock options granted during the year ended December 31, 2011.


	Grants During the Years Ended December 31,
	2012			2011		2010
Weighted average stock price volatility		64.2	%		—		62.5	%
Expected term (in years)		4.0-5.0			—		4.0-5.0
Risk-free interest rate		0.89	%		—		1.51	%
Expected dividend yield		0.0	%		—		0.0	%
Weighted average grant date fair value per share	$	5.96			—	$	6.94

Aggregated information regarding Company issued stock options is summarized below:


	2005 Plan
	Options			Weighted Average Exercise Price		Weighted Average Remaining Contractual Life (Years)		Aggregate Intrinsic Value
Outstanding at December 31, 2011		448,344		$	2.55
Granted		—			—
Exercised		(19,260	)		2.30
Canceled or expired		—			—

Balance, December 31, 2012		429,084			2.56		3.2	$	6.4


Vested and Exercisable as of:
December 31, 2012		420,368		$	2.43		3.1	$	6.3


	2010 Plan
	Options			Weighted Average Exercise Price		Weighted Average Remaining Contractual Life (Years)		Aggregate Intrinsic Value
Outstanding at December 31, 2011		625,400		$	13.17
Granted		373,000			11.25
Exercised		(3,675	)		13.17
Canceled or expired		(24,225	)		12.79

Balance, December 31, 2012		970,500			12.44		8.9	$	4.9


Vested and Exercisable as of:
December 31, 2012		423,500		$	12.68		8.4	$	2.0

The total intrinsic value of options exercised during the year ended December 31, 2012 was $0.2. Total unrecognized compensation cost related to stock options outstanding was $2.6 as of December 31, 2012.

Restricted Stock

On September 13, 2010, pursuant to the 2010 Plan, 130,100 shares of restricted stock were granted to certain members of our management and to members of our Board of Directors. The awards granted to management vest ratably over four years, while the awards granted to the members of our Board of Directors vest ratably over three years. The fair value of the restricted stock granted was $13.17 per share, determined based on the fair value of the Company’s common stock on the grant date. During the years ended December 31, 2012 and 2011, 33,800 and 34,394 shares, respectively, of restricted stock vested, and a total of 1,800 shares of restricted stock were forfeited. Total unrecognized compensation cost related to restricted stock granted in September 2010 was $0.6 as of December 31, 2012.

On January 1, 2012, pursuant to the 2010 Plan, 82,100 shares of restricted stock were granted to certain members of our management and to members of our Board of Directors. The awards granted to management vest ratably over four years from the date of grant, while the awards granted to the members of our Board of Directors vest ratably over two years from the date of grant. The fair value of the restricted stock granted was $11.25 per share, determined based on the closing price of the Company’s common stock on the day previous to the grant date. During the year ended December 31, 2012, 24,274 shares of restricted stock vested, and there were no forfeitures. Total unrecognized compensation cost related to restricted stock granted in January 2012 was $0.7 as of December 31, 2012.

13. Segment and Related Information

We follow the provisions of ASC Topic 280 “Segment Reporting,” which requires the utilization of a “management approach” to define and report the financial results of operating segments. The management approach defines operating segments along the lines used by the Company’s chief operating decision maker (“CODM”) to assess performance and make operating and resource allocation decisions. Our CODM evaluates performance and allocates resources based primarily on operating income (loss). The accounting policies of the reportable segments are the same as those described in the summary of significant accounting policies in Note 1.

Our operating segments are based on internal management reporting, which disaggregates business units by product group and geographic region. Certain geographic regions and product groups with similar economic and other basic characteristics are aggregated for reporting purposes. Our operating segments are organized into three product group reportable segments. Each segment is described as follows:

•

Plates and Shapes consists of operating facilities that maintain an inventory focusing on carbon products such as structural plate, beams, bars and tubing. This segment provides processing services such as cutting, cambering/leveling, punching, bending, shearing, cut-to-length, blast and paint, and tee-splitting.

•

Flat Rolled and Non-Ferrous consists of operating facilities that maintain an inventory of cold rolled, coated, and hot rolled steel products and various non-ferrous flat rolled products including aluminum, stainless steel, copper and brass. This segment provides processing services such as slitting, precision blanking, leveling, cut-to-length, punching, and shearing.

•

Building Products consists of manufacturing plant locations and sales centers that produce and distribute aluminum and steel building products consisting of covered canopies and walkways, awnings, sunrooms, solariums and other products primarily for the commercial and residential building products industries.

The following tables summarize financial information regarding segments:


	Plates and Shapes		Flat Rolled and Non- Ferrous		Building Products			Corporate and Other			Total
Year Ended December 31, 2012:
Net sales	$	787.1	$	1,124.7	$	82.8		$	(11.0	)	$	1,983.6
Operating income (loss)		77.5		67.9		1.5			(28.9	)		118.0
Capital expenditures		11.1		7.4		0.2			1.4			20.1
Depreciation and amortization⁽¹⁾		9.3		13.0		2.2			0.4			24.9
Year Ended December 31, 2011:
Net sales	$	765.9	$	1,046.7	$	85.8		$	(12.5	)	$	1,885.9
Operating income (loss)		83.0		78.1		(0.7	)		(25.2	)		135.2
Capital expenditures		6.4		10.5		4.6			0.3			21.8
Depreciation and amortization⁽¹⁾		9.6		10.9		2.2			0.6			23.3
Year Ended December 31, 2010:
Net sales	$	538.0	$	680.5	$	83.0		$	(9.4	)	$	1,292.1
Operating income (loss)		38.4		45.3		(0.6	)		(22.9	)		60.2
Capital expenditures		2.3		0.7		—			1.0			4.0
Depreciation and amortization⁽¹⁾		9.2		7.0		2.4			1.2			19.8

(1)	Includes depreciation expense reflected in cost of goods sold for the Building Products Group.


	December 31,
	2012		2011		2010

Total Assets:
Plates and Shapes	$	361.8	$	357.1	$	328.1
Flat Rolled and Non-Ferrous		558.7		550.5		329.8
Building Products		38.0		39.5		38.7
Corporate and Other		45.4		37.7		48.9


Consolidated	$	1,003.9	$	984.8	$	745.5

The amounts shown as an operating loss under the column heading “Corporate and Other” consist primarily of general and administrative costs that are not allocated to the segments. The reconciliation of operating income (loss) to income before income taxes is shown within the Consolidated Statements of Operations and Comprehensive Income and therefore is not separately presented.

For the year ended December 31, 2012, Gregor contributed $9.2 and $1.3 of incremental net sales and operating income, respectively, versus the same period of 2011.

For the year ended December 31, 2011, J. Rubin, ORMS and Trident contributed a combined $194.7 and $13.1 of incremental net sales and operating income, respectively, versus the same period of 2010.

During the year ended December 31, 2011, our Building Products Segment recorded a gain of approximately $0.7 resulting from a settlement with the previous owners of the Dura-Loc (now Allmet) roofing business we acquired in 2006 to cover pre-acquisition warranty claims.

Our areas of operations are solely in the U.S. and Canada. No domestic or foreign geographic area is significant to the consolidated operations. Export sales were $15.7, $15.3 and $13.6 for the years ended December 31, 2012, 2011 and 2010, respectively. The Company had no material long-lived assets in its Canadian operations at December 31, 2012 and 2011.

We have a broad customer base within the U.S. with no single customer being significant to consolidated operations. For the years ended December 31, 2012, 2011, and 2010, sales to any one customer did not exceed 10% of consolidated net sales.

14. Employee Benefit Plans

The Metals USA 401(k) Plan (the “Metals USA Plan”) was established on June 1, 1998. Effective January 1, 2004, participants are eligible to join the Metals USA Plan on hire date. Employee contributions are limited to the Internal Revenue Service established annual dollar limits.

Employees become 50% vested in Company matching contributions and earnings after completing one year of service and fully vested after completing two years of service.

The Metals USA Union 401(k) Plan was established on October 1, 1998 to provide a standard defined contribution savings plan for all employees covered under the terms of a collective bargaining agreement (the “Union Plan”). Metals USA was not obligated by the Union Plan to make contributions, unless required by the operative collective bargaining agreement. The Union Plan was merged with the Metals USA Plan effective May 1, 2011. Participants in the Union Plan were enrolled in the Metals USA Plan.

The Company’s matching contributions for both plans for the years ended December 31, 2012, 2011 and 2010 were $1.6, $1.3 and $0.6, respectively.

15. Commitments and Contingencies

Operating Lease Agreements

We lease certain office space, warehouse space and equipment under operating leases. Minimum rental commitments under operating leases at December 31, 2012 are as follows:


Years Ended December 31,	Minimum Rental Commitments

2013	$	11.0
2014		7.8
2015		7.4
2016		4.5
2017		3.3
Thereafter		9.8


Total minimum lease payments	$	43.8

Rental expense for operating leases was $14.0, $14.2 and $14.2 for the years ended December 31, 2012, 2011 and 2010, respectively.

Pension Fund Withdrawal Obligation

During 2007, we discontinued our participation in a multiemployer pension fund. In connection with our cessation of contributions to the plan, we were assessed a withdrawal liability of approximately $5.6, which we are paying in monthly installments through 2021. Our total withdrawal liability, including interest and amortization charges, amounted to approximately $5.4 and $6.0 as of December 31, 2012 and 2011, respectively.

Dividends on Common Stock

On February 5, 2013, our Board of Directors declared a regular quarterly cash dividend of $0.06 per share, which was paid on March 12, 2013 to stockholders of record as of the close of business on February 26, 2013.

Letters of Credit

Letters of credit outstanding at December 31, 2012 consist of letters of credit in the amount of $12.4 in conjunction with the IRBs (see Note 9) and other letters of credit aggregating $5.9 (total letters of credit of $18.3 at December 31, 2012). Other letters of credit consist primarily of collateral support for our property and casualty insurance program. All letters of credit reduce the amount available to borrow under the ABL facility.

Contingencies

Litigation Relating to the Merger

Other Litigation

16. Related Party Transactions

Upon completion of the Apollo Merger, Metals USA Holdings entered into an advisory agreement with Apollo under which Apollo or its affiliates provided us with advisory services. Pursuant to the agreement, Apollo received an annual advisory fee equal to $2.0, payable on March 15 of every year, starting on March 15, 2006. Apollo elected to waive $0.5 of the annual advisory fee indefinitely, but reserved the right to revoke this waiver. The payment obligation was recorded as a current liability at the present value of minimum future annual payments of $1.5 and deferred advisory fees of $8.6 were amortized on a straight-line basis over the term of the agreement.

The advisory agreement would have terminated on December 31, 2012; however, Apollo elected to terminate the advisory agreement in connection with the completion of the Company’s IPO in April 2010. The payment obligation was terminated in consideration of $2.5. Unamortized deferred advisory fees of $3.3 were charged to expense during the second quarter of 2010.

17. Earnings Per Share

Basic earnings per share is calculated by dividing net income by the weighted average number of common shares outstanding during the period, including the weighted average impact of any shares issued during the year. Diluted earnings per share calculations also include the dilutive effect of stock options and non-vested restricted stock.

The weighted average number of shares used to determine basic and diluted earnings per share was:


	Years Ended December 31,
	2012		2011		2010
Weighted average shares outstanding—basic		37,083,174		37,041,813		33,795,375
Effect of dilution:
Stock options		276,372		281,768		307,440
Restricted stock		3,261		1,391		—

Weighted average shares outstanding—diluted		37,362,807		37,324,972		34,102,815


Antidilutive stock options and restricted stock excluded from calculation		970,500		625,400		632,000

18. Quarterly Financial Information (Unaudited)

Selected unaudited quarterly financial information for the years ended December 31, 2012 and 2011 is as follows:


	2012 Quarter Ended								2011 Quarter Ended
	Dec. 31		Sept. 30		June 30		Mar. 31		Dec. 31		Sept. 30		June 30		Mar. 31
Net sales	$	437.5	$	483.7	$	537.1	$	525.3	$	455.7	$	492.3	$	505.6	$	432.3
Operating income		18.1		27.4		38.3		34.2		26.8		35.3		43.3		29.8
Net income		3.7		13.7		19.0		16.3		14.0		16.7		21.5		12.4
Net income per share:
Income per share—basic	$	0.10	$	0.37	$	0.51	$	0.44	$	0.38	$	0.45	$	0.58	$	0.34
Income per share—diluted	$	0.10	$	0.37	$	0.51	$	0.44	$	0.37	$	0.45	$	0.57	$	0.33

19. Subsequent Event

On February 6, 2013, Metals USA Holdings, Reliance and Merger Sub entered into the Merger Agreement under which Reliance has agreed to acquire Metals USA Holdings. Pursuant to the Merger Agreement, and subject to the satisfaction or waiver of the conditions therein, the Merger will take place with Metals USA Holdings surviving as a wholly-owned subsidiary of Reliance.

In addition, on March 8, 2013, Metals USA Holdings and Lourenco Goncalves, our President and Chief Executive Officer, entered into a separation agreement and general release (the “Separation Agreement”), which provides that Mr. Goncalves’ employment with the Company will be terminated without cause immediately prior to the effective time of the Merger, which would entitle Mr. Goncalves to receive, pursuant to the terms of his employment agreement with the Company, in addition to any accrued and unpaid compensation and benefits through the date of termination:

•

a lump sum payment of $750,000 representing one year of his annual base salary;

•

one year of his annual base salary, or $750,000, payable in accordance with the Company’s regular payroll schedule over a twelve month period commencing in the thirteenth month following the termination of his employment;

•

a lump sum payment of $307,398, representing a pro-rated bonus for 2013, the year in which the termination of employment occurs, which amount will increase by $3,014 for each day after April 12, 2013 on which the closing occurs;

•

a lump sum payment of $1.1 million payable in March 2015 and a lump sum payment of $1.1 million payable in March 2016, representing a bonus for each of the two fiscal years after the fiscal year in which the termination of employment occurs; and

•

at his election, to continue his and his beneficiaries’ participation in the Company’s medical benefit plans in which they participated prior to the date of termination, and reimbursement for the cost of COBRA continuation of such coverage for a period of up to eighteen months.

The Separation Agreement includes a general release of claims against the Company and its subsidiaries as required by the terms of Mr. Goncalves’ employment agreement with the Company. In addition, Mr. Goncalves is subject to certain restrictions on his ability to compete with the Company for two years or solicit its customers or employees for two years after the date of termination.

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

As of December 31, 2012, an evaluation was carried out under the supervision and with the participation of our management, including the Chief Executive Officer and the Chief Financial Officer, of the effectiveness of our disclosure controls and procedures. Based on that evaluation, the CEO and CFO have concluded that our disclosure controls and procedures are effective to ensure that the information required to be disclosed in reports we file or submit under the Securities and Exchange Act of 1934, as amended, is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including the CEO and CFO, as appropriate, to allow timely decisions regarding required disclosure.

Changes in Internal Control over Financial Reporting

We maintain a system of internal accounting controls that is designed to provide reasonable assurance that our books and records accurately reflect the transactions of the Company and that our policies and procedures are followed. There have been no changes in our internal controls during the fourth quarter that have materially affected, or are reasonably likely to materially affect such controls.

MANAGEMENT’S ANNUAL REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

The management of Metals USA Holdings Corp. and its subsidiaries (the “Company”) is responsible for establishing and maintaining adequate internal control over financial reporting. The Company’s internal control system was designed to provide reasonable assurance to management and the Board of Directors regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted in the United States of America.

All internal control systems, no matter how well designed, have inherent limitations. Even those systems designed to be effective can provide only reasonable assurance with respect to financial statement presentation and preparation. Further, because of changes in conditions, the effectiveness of internal control may vary over time.

Management conducted an evaluation of the effectiveness of the Company’s internal control over financial reporting based on the framework in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on this evaluation, management concluded that the Company’s internal control over financial reporting was effective as of December 31, 2012. Deloitte & Touche LLP, the independent registered public accounting firm that audited the consolidated financial statements contained in this report, has issued an attestation report on the Company’s internal control over financial reporting.

The evaluation of effectiveness of the Company’s internal control over financial reporting did not include the internal control over financial reporting at Gregor Technologies LLC (“Gregor”), which was acquired on March 12, 2012 and whose net and total assets constitute approximately 0.1 percent and 1.8 percent of net and total assets, respectively, of the consolidated financial statement amounts as of December 31, 2012. Gregor’s sales and net loss constitute approximately 0.5 percent of net sales and 0.7 percent of net income of the consolidated financial statement amounts for the year ended December 31, 2012.

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of

Metals USA Holdings Corp.

Fort Lauderdale, Florida

We have audited the internal control over financial reporting of Metals USA Holdings Corp. and subsidiaries (the “Company”) as of December 31, 2012, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. As described in Management’s Annual Report on Internal Control Over Financial Reporting, management excluded from its assessment the internal control over financial reporting at Gregor Technologies, LLC, which was acquired on March 12, 2012 and whose net and total assets constitute approximately 0.1 percent and 1.8 percent of net and total assets, respectively, of the consolidated financial statement amounts as of December 31, 2012 and whose sales and net loss constitute approximately 0.5 percent of net sales and 0.7 percent of net income of the consolidated financial statement amounts for the year ended December 31, 2012. Accordingly, our audit did not include the internal control over financial reporting at Gregor Technologies, LLC. The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Annual Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed by, or under the supervision of, the company’s principal executive and principal financial officers, or persons performing similar functions, and effected by the company’s board of directors, management, and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of the inherent limitations of internal control over financial reporting, including the possibility of collusion or improper management override of controls, material misstatements due to error or fraud may not be prevented or detected on a timely basis. Also, projections of any evaluation of the effectiveness of the internal control over financial reporting to future periods are subject to the risk that the controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2012, based on the criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated financial statements and financial statement schedule as of and for the year ended December 31, 2012 of the Company and our report dated March 15, 2013 expressed an unqualified opinion on those financial statements and financial statement schedule and included an explanatory paragraph regarding that on February 6, 2013, Metals USA Holdings Corp., Reliance Steel & Aluminum Co. (“Reliance”) and RSAC Acquisition Corp. (a wholly-owned subsidiary of Reliance), entered into an Agreement and Plan of Merger under which Reliance has agreed to acquire Metals USA Holdings Corp.

/s/ DELOITTE & TOUCHE LLP

Certified Public Accountants

Boca Raton, Florida

March 15, 2013

PART III

Item 10. Directors, Executive Officers and Corporate Governance

Board of Directors

The Company’s Certificate of Incorporation provides that the number of directors must be at least six but not more than 15, and must be divided into three classes as nearly equal in number as possible. The exact number of directors within that range is determined from time to time by the Board of Directors and currently consists of seven members. The term of each class is three years, and the term of one class expires each year in rotation. Set forth below is certain information about our directors and executive officers, as of the date of filing:

C. Lourenco Goncalves, 55, has been President and Chief Executive Officer, and director of the Company since February 2003. On May 1, 2006, Mr. Goncalves became Chairman of the Board of Directors of the Company. From March 1998 to February 2003, Mr. Goncalves was President and Chief Executive Officer of California Steel Industries, Inc. (CSI), a company located in Fontana, California. Prior to that, Mr. Goncalves was employed by Companhia Siderúrgica National (CSN) in Brazil. During 17 years with CSN, Mr. Goncalves held several positions in operations and sales, the last one as a Managing Director. Mr. Goncalves serves on the Board of Directors of Ascometal, a major European producer of special steels headquartered in Paris, France. Mr. Goncalves earned a masters of science degree in metallurgical engineering from the Federal University of Minas Gerais in Belo Horizonte, Brazil, and a bachelor’s degree in engineering from the Military Institute of Engineering in Rio de Janeiro, Brazil.

John T. Baldwin, 56, became a director and Chairman of the Audit Committee of the Company on May 1, 2006 and a director of Metals USA on January 18, 2006. Mr. Baldwin served as Senior Vice President and Chief Financial Officer of Graphic Packaging Corporation from September 2003 to August 2005, and as Vice President and Chief Financial Officer of Worthington Industries, Inc. from December 1998 to September 2003. He joined Worthington, a steel processor, in 1997 as Treasurer. Prior to Worthington, Mr. Baldwin served in various financial capacities at Tenneco, Inc. in Greenwich, Connecticut, London, England and Houston, Texas. Mr. Baldwin is a graduate of the University of Houston and the University of Texas School of Law. Mr. Baldwin served on the Board of The Genlyte Group Incorporated, a lighting manufacturer, from March 2003 through January 2008, at which time he resigned from such Board upon the company’s purchase by Koninklijke Philips Electronics N.V., and was Chairman of the Audit Committee of The Genlyte Group Incorporated from April 2006 through January 2008.

Larry K. Powers, 70, became a director of the Company on April 8, 2010. Mr. Powers served as a Chairman, President and Chief Executive Officer of The Genlyte Group Incorporated, a manufacturer of lighting fixtures and controls, from April 2000 until its acquisition by Koninklijke Philips Electronics N.V. in January 2008. Mr. Powers joined Genlyte’s Board of Directors in July 1993 and was appointed Genlyte’s President and Chief Executive Officer in January 1994. Prior to that time, Mr. Powers held a variety of management, sales and marketing positions within Genlyte including Executive Vice President, President of Genlyte U.S. Operations, and President of the High Intensity Discharge/Outdoor Division. Before joining Genlyte, Mr. Powers held a variety of sales, marketing and general management positions in the lighting industry. Mr. Powers received a B.S. from Brigham Young University and a certificate from the Penn State University Executive Management Training Program.

Mark A. Slaven, 56, became a director of the Company on April 8, 2010. Mr. Slaven is the CEO of Tolt Service Group, an IT service provider, where he has been employed since September 2008. Previously, Mr. Slaven served as Executive Vice President, Chief Financial Officer and Treasurer of Cross Match Technologies, Inc., an international identity management company, from August 2006 to January 2008. Mr. Slaven was Senior Vice President, Chief Financial Officer and Treasurer of Cross Match Technologies, Inc. from October 2005 until August 2006. From October 2004 until August 2005, Mr. Slaven served as Chief Financial Officer of Spectrasite Communications, Inc., a North American wireless communications site operator. In June 1997, Mr. Slaven joined 3Com Corporation, a networking solutions provider, where he served as a Vice President until June 2002, at which time he was promoted to Chief Financial Officer and served in such capacity until August 2004. Prior to that time, he held a variety of senior financial management positions at Lexmark International, Inc. and International Business Machines Corporation. He also practiced as an engineer with General Dynamics Corporation. Mr. Slaven served as a Director of Terayon Communication Systems, Inc. from July 2003 to August 2006 and as a director of LCC International, Inc. from January 2008 to November 2008. Mr. Slaven received an M.B.A. in finance with honors from the University of Chicago Graduate School of Business and a B.S. in Civil Engineering from Tufts University.

Eric L. Press, 47, became a director of the Company on May 9, 2005 and a director of Metals USA on November 30, 2005. Mr. Press is a partner of Apollo Management, L.P. Prior to joining Apollo in 1998, Mr. Press was associated with the law firm of Wachtell, Lipton, Rosen & Katz, specializing in mergers, acquisitions, restructurings and related financing transactions. From 1987 to 1989, Mr. Press was a consultant with The Boston Consulting Group (BCG), a management consulting firm focused on corporate strategy. Mr. Press has been engaged in all aspects of Apollo’s lodging, leisure and entertainment investment activities, as well as Apollo’s investments in basic industries and financial services. Mr. Press serves on the boards of directors of Apollo Commercial Real Estate Finance, Inc. (from 2009 to present), Athene (from 2009 to present), Verso Paper Corp. (from 2009 to present), Prestige Cruise Holdings (from 2007 to present), Affinion Group (from 2005 to present), Caesars Entertainment Corporation (from 2008 to present) and Noranda Aluminum Holding Corporation (from 2007 to present). In the last five years, Mr. Press served on the board of directors

of Quality Distribution, Inc. (from 2004 to 2008), Innkeepers USA Trust (from 2007 to 2010) and served on the Board of Trustees of the Rodeph Sholom School in New York City (from 2004 to 2010). Mr. Press graduated Magna Cum Laude from Harvard College with an A.B. in Economics, and from Yale Law School, where he was a Senior Editor of the Yale Law Review.

M. Ali Rashid, 36 became a director of the Company on May 9, 2005 and a director of Metals USA on November 30, 2005. Mr. Rashid is a partner of Apollo Management, L.P. He has been employed with Apollo since 2000. Prior to that time, Mr. Rashid was employed by the Goldman Sachs Group in the Financial Institutions Group of its Investment Banking Division. Mr. Rashid serves on the board of directors of Quality Distribution (from 2005 to present), Realogy Corporation (from 2007 to present) and Ascometal (from 2011 to present). Mr. Rashid served on the boards of directors of Countrywide plc from 2007 to 2009 and Noranda Aluminum Holding Corporation from 2007 to 2013. Mr. Rashid received an M.B.A. from the Stanford Graduate School of Business and graduated Magna Cum Laude and Beta Gamma Sigma from Georgetown University with a B.S. in Business Administration.

Matthew R. Michelini, 31, became a director of the Company and Metals USA on November 21, 2008. Mr. Michelini is a principal of Apollo Management, L.P. He joined Apollo in 2006. Prior to joining Apollo, Mr. Michelini was a member of the Mergers & Acquisitions group at Lazard Frères & Co. Mr. Michelini serves on the boards of directors of Athene (from 2010 to present) and Noranda Aluminum Holding Corporation (from 2007 to present). Mr. Michelini graduated from Princeton University with a B.S. in Mathematics and a Certificate in Finance.

Director Qualifications

We believe that the members of our Board of Directors should have a range of skills, experience, diversity, and expertise that enables them to provide sound guidance with respect to our business and operations. Each of our directors has an established record of professional accomplishment and particular experience, qualifications, attributes and skills that the Board of Directors considers important in determining that each director should be a member of our Board, as described below.

The composition of our Board is balanced among three independent directors, three directors affiliated with Apollo, our largest stockholder, and our President and Chief Executive Officer. That balance, to which each of our directors contributes, is important to us for the following reasons:

•

As independent directors, each of Messrs. Baldwin, Powers and Slaven contributes an outside point of view that we value for providing multiple perspectives to the Board of Directors’ oversight and direction of our business and facilitating objectivity in the Board decision-making process.

•

Because of their affiliation with Apollo, each of Messrs. Press, Rashid and Michelini is particularly attuned to strategic, financial and other matters that may affect our stockholders’ investments in us.

•

Mr. Goncalves, as our President and Chief Executive Officer, brings his experience and in-depth knowledge of the Company and our industry, operations and business plans to the Board.

In addition, each of our directors has specific knowledge, professional experience and expertise relevant to serving as a director of the Company, and most of our directors have experience serving on boards of directors of other companies. Each director also has the following key attributes that we believe are important to an effective board of directors: integrity and demonstrated high ethical standards; sound judgment; analytical skills; the ability to engage management and fellow directors in a constructive and collaborative fashion; and diversity of background, experience and thought. See above for additional biographic information concerning our directors.

Executive Officers

Robert C. McPherson, III, 49, became Senior Vice President of Metals USA on March 31, 2003, Chief Financial Officer of Metals USA on December 1, 2005 and Senior Vice President and Chief Financial Officer of Metals USA Holdings on May 1, 2006. From August 2004 through November 2005, Mr. McPherson was President of the Building Products Group of Metals USA and from March 2003 to August 2004, Mr. McPherson was Senior Vice President, Business Development of Metals USA. Prior to joining us, Mr. McPherson was employed at CSI from 1989 until March 2003. Mr. McPherson served in a number of capacities at CSI, most recently having served as Treasurer and Controller from 1996 until 2003, Assistant Treasurer from 1992 until 1996, and as Cash Management Administrator from 1989 until 1992.

Roger Krohn, 60, became Senior Vice President of Operations in January 2011, responsible for operations at all Metals USA facilities. Previously, Mr. Krohn served as President of the Flat Rolled and Non-Ferrous Group of Metals USA from November 2003 until January 2011 and was responsible for the operations of our Flat Rolled and Non-Ferrous Group. Mr. Krohn served as President of Krohn Steel Service Center from 1982 until 1998. After we acquired Krohn Steel Service Center in 1998, Mr. Krohn remained as President and General Manager of Metals USA until becoming President of the Flat Rolled and Non-Ferrous Group in November 2003. After attending college, Mr. Krohn served seven years as a pilot in the U.S. Air Force, commissioned as an officer in 1975.

Section 16(a) Beneficial Ownership Reporting Compliance

Section 16(a) of the Securities Exchange Act of 1934, as amended, requires the Company’s reporting officers and directors, and persons who own more than ten percent of the Company’s common stock, to file reports of ownership and changes in ownership on Forms 3, 4 and 5 with the SEC, the NYSE and the Company. Based solely on the Company’s review of the forms filed with the SEC and written representations from reporting persons that they were not required to file Form 5 for certain specified years, the Company believes that all of its reporting officers, directors and greater than ten percent beneficial owners complied with all filing requirements applicable to them during the year ended December 31, 2012.

Corporate Governance

Overview

The Board is responsible for overseeing the overall performance of the Company. Members of the Board are kept informed of the Company’s business primarily through discussions with the Chief Executive Officer and other members of the Company’s management, by reviewing materials provided to them and by participating in Board and committee meetings. The Board has adopted Corporate Governance Guidelines, a Code of Business Conduct and Ethics, and charters for each of its standing committees, including the Audit Committee, Compensation Committee, Nominating/Governance Committee, and Executive Committee, each of which is discussed further below. Each of these documents is included in the investor relations section of the Company’s website at www.metalsusa.com.

Committees of the Board

The Board currently maintains among its standing committees a Compensation Committee, an Audit Committee, a Nominating/Governance Committee and an Executive Committee. The following provides a description of certain functions and current membership for each of these committees of the Board of Directors.

Compensation Committee

The principal duties and responsibilities of the Compensation Committee are as follows:

•

to review, evaluate and make recommendations to our full Board of Directors regarding our compensation policies and establish performance-based incentives that support our long-term goals, objectives and interests;

•

to review and approve the compensation of our Chief Executive Officer, all employees who report directly to our Chief Executive Officer and other members of our senior management;

•

to review and make recommendations to our Board of Directors with respect to our incentive compensation plans and equity-based compensation plans;

•

to set and review the compensation of and reimbursement policies for members of our Board of Directors;

•

to provide oversight concerning selection of officers, expense accounts, indemnification and insurance matters, and separation packages; and

•

to prepare an annual Compensation Committee report, provide regular reports to our Board of Directors, and take such other actions as are necessary and consistent with the governing law and our organizational documents.

The current members of the Compensation Committee are Messrs. Michelini, Press and Rashid. The Board of Directors has not determined that any of Messrs. Michelini, Press or Rashid is independent. We have availed ourselves of the “controlled company” exception under NYSE corporate governance rules which exempts us from the requirement that we have a compensation committee composed entirely of independent directors. See Item 13. “Certain Relationships and Related Transactions, and Director Independence” for more information regarding the “controlled company” exception.

In March 2013, the Compensation Committee, with the assistance of our Chief Legal Officer, reviewed the Company’s compensation policies and practices with a focus on identifying any aspects or components of such policies and practices that may create risks that are reasonably likely to have a material adverse effect on the Company. Although this review focused largely on potential risks associated with executive level compensation programs and policies, the Compensation Committee also discussed the Company’s compensation policies and practices for all employees. While discussing potential risks, the Compensation Committee also discussed the presence of risk mitigating factors such as the existence of internal controls and of counter-balancing compensation forms and programs. As a result of this review, the Compensation Committee has concluded that the Company’s compensation policies and practices do not create risks that are reasonably likely to have a material adverse effect on the Company.

Audit Committee

The principal duties and responsibilities of our Audit Committee are to oversee and monitor the following:

•

our financial reporting process and internal control system;

•

the integrity of our financial statements;

•

the independence, qualifications and performance of our independent auditor;

•

the performance of our internal audit function; and

•

our compliance with legal, ethical and regulatory matters.

The current members of the Audit Committee are Messrs. Baldwin, Powers and Slaven. The Board of Directors has determined that each of Messrs. Baldwin, Powers and Slaven qualify as an “audit committee financial expert,” as such term is defined in Item 407(d)(5) of Regulation S-K, and are independent as defined in Rule 10A-3 of the Exchange Act and under the NYSE listing standards. Furthermore, each member of the Audit Committee has accounting and related financial management expertise within the meaning of the NYSE listing standards.

Nominating/Governance Committee

The principal duties and responsibilities of the Nominating/Governance Committee are as follows:

•

to establish criteria for Board and committee membership and recommend to our Board of Directors proposed nominees for election to the Board of Directors and for membership on committees of our Board of Directors; and

•

to make recommendations to our Board of Directors regarding Board governance matters and practices.

The current members of the Nominating/Governance Committee are Messrs. Rashid and Michelini. The Board of Directors has not determined that either of Messrs. Rashid and Michelini is independent. We have availed ourselves of the “controlled company” exception under NYSE corporate governance rules which exempts us from the requirement that we have a Nominating/Governance Committee composed entirely of independent directors. See Item 13. “Certain Relationships and Related Transactions, and Director Independence” for more information regarding the “controlled company” exception.

Executive Committee

The current members of the Executive Committee are Messrs. Goncalves and Rashid. The principal duties and responsibilities of the Executive Committee are as follows:

•

subject to applicable law, to exercise the powers and the duties of our Board of Directors between Board meetings and while the Board of Directors is not in session; and

•

to implement the policy decisions of our Board of Directors.

Corporate Governance Guidelines

The Corporate Governance Guidelines, adopted by the Board of Directors, are a set of principles that provide a framework for the Company’s corporate governance. The Board of Directors adopted the Corporate Governance Guidelines to assist the Board of Directors in the exercise of its responsibilities and to serve the interests of the Company and its stockholders. The Corporate Governance Guidelines are intended to serve as a flexible framework within which the Board of Directors may conduct its business and not as a set of legally binding obligations. The Company has made the Corporate Governance Guidelines available on its website at www.metalsusa.com.

Code of Business Conduct and Ethics

The Board of Directors has adopted a Code of Business Conduct and Ethics, which is a “code of ethics” as defined by the applicable rules of the SEC, which has been posted on our website at www.metalsusa.com. The Company intends to post amendments to or waivers from its Code of Business Conduct and Ethics (to the extent applicable to the Chief Executive Officer, Chief Financial Officer and Controller) on the Company’s website at www.metalsusa.com.

Item 11. Executive Compensation

Compensation Discussion and Analysis

Overview

This Compensation, Discussion and Analysis section discusses the manner in which the Company compensated its three named executive officers—Messrs. C. Lourenco Goncalves, Robert C. McPherson III, and Roger Krohn—for the fiscal year ended December 31, 2012. It explains the Company’s philosophy and objectives with respect to executive compensation, the principal components of executive compensation, and the policies and procedures under which forms and amounts of executive compensation are determined.

Merger with Reliance

We entered into the Merger Agreement with Reliance on February 6, 2013. The Merger Agreement prohibits the Company from taking certain compensation actions, including increasing salaries or other compensation for executives and making grants of equity awards, without the consent of Reliance. The Merger with Reliance may result in payments to our named executive officers. See “Potential Payments upon Termination or Change of Control—Change of Control Compensation” below for more information.

Compensation Philosophy and Objectives

The Company believes an effective compensation program should be one that is designed to:

•

attract and retain the best possible executive talent;

•

tie short and long-term cash and equity incentives to corporate, business unit and individual performance objectives; and

•

align named executive officers’ incentives with the enhancement of stockholder value.

To achieve these objectives, the Compensation Committee implements, maintains and monitors compensation plans which tie a substantial portion of the executives’ overall compensation to the achievement of the Company’s goals, such as profitability, workplace safety and the efficient use of capital.

Executive Compensation Process

The Compensation Committee implements, maintains and monitors compensation plans that determine the compensation and benefits paid to or provided to our executive officers, including the named executive officers. The Compensation Committee makes all compensation decisions for the Chief Executive Officer and all decisions relating to equity-based compensation awards. The Compensation Committee, together with recommendations and input from the Chief Executive Officer, makes non-equity compensation decisions with respect to the other named executive officers. To achieve the Company’s compensation objectives, the Compensation Committee has established annual and longer-term cash and equity compensation components to motivate the executives to achieve, and hopefully exceed, the business goals established by the Company. We believe that our executive compensation program is designed to reasonably and fairly motivate, retain and reward our executives for achieving our objectives and goals.

In making decisions with respect to 2012 executive compensation, the Compensation Committee considered a number of factors, including the Company’s performance, the need to design our executive compensation program to tie our executives’ goals and interests to those of ours and our stockholders, and the importance of attracting and retaining highly qualified executives.

In 2010, the Compensation Committee considered a report produced by Towers Watson, Inc. (“Towers Watson”), a compensation consultant that the Compensation Committee retained to aid in a review of our executive compensation program. In 2010, Towers Watson provided an analysis of the Company’s executive compensation program as compared to a competitive peer group of identified companies, as well as to more general survey data. Towers Watson did not provide any other services to the Compensation Committee or to the Company in 2010. Towers Watson also did not provide any services to the Compensation Committee or to the Company since 2010, and the Compensation Committee did not engage Towers Watson to update its 2010 report.

In 2012, the Compensation Committee engaged Pay Governance to conduct an evaluation and competitive assessment of the Company’s top 14 senior managers and officers, including the named executive officers. In performing its analysis and making recommendations, Pay Governance reported to and acted at the direction of the Compensation Committee. The Compensation Committee did not act upon or adopt any of Pay Governance’s recommendations in 2012 as the compensation decisions for 2012 had already been made before Pay Governance delivered its report to the Compensation Committee in June 2012. If the pending Merger is not consummated, the Compensation Committee intends to consider the report of Pay Governance in connection with its future compensation decisions. Pay Governance is not affiliated with any of our directors or officers and the work of Pay Governance has not raised any conflicts of interest. Our management did not engage Pay Governance and did not direct or oversee the executive compensation analysis and recommendations of Pay Governance, and Pay Governance did not provide any other services to the Compensation Committee or the Company in fiscal 2012.

In making its determinations in 2012, the Compensation Committee believed it remained appropriate to consider the Towers Watson report in making decisions with respect to our executive compensation program.

Towers Watson’s report provided a peer group analysis based on competitive data for base salary, annual cash incentive awards and long-term stock-based incentives paid by a peer group of U.S.-based public companies that operate in the same industry as us and compete with us for executive talent. Set forth below are the companies that were selected as our core peer group for fiscal 2010 and which remained the same in fiscal 2012.


Company		Primary Industry
• Reliance Steel & Aluminum Co.		Steel
• Gerdau Long Steel North America		Steel
• AK Steel Holding Corporation		Steel
• Steel Dynamics, Inc.		Steel
• Commercial Metals Company		Steel
• Ryerson Holding Corporation		Steel
• Worthington Industries, Inc.		Steel
• Applied Industrial Technologies		Trading & Distributing
• Schnitzer Steel Industries, Inc.		Steel
• Russel Metals, Inc.		Trading & Distributing
• Carpenter Technology Corporation		Steel
• Kaman Corporation		Trading & Distributing
• NCI Building Systems		Building Products
• AM Castle & Co.		Steel
• Quanex Building Products Corporation		Building Products
• Olympic Steel Inc.		Steel

In addition, Towers Watson’s report presented general survey information collected from the following three published compensation surveys reflecting manufacturing and general industry practices: the Watson Wyatt Data Services 2009/10 Top Management Survey; Mercer 2009 Executive Compensation Survey; and Towers Perrin 2009 Executive Compensation Survey. Though Towers Watson’s report did not disclose the specific companies included in these surveys, the data collected from the surveys and considered by the Compensation Committee were tailored to match the Company’s size (companies with an annual revenue or sales volume of $1 to 2.5 billion). The Compensation Committee believes the general survey data is relevant largely to validate the core peer group information presented in the Towers Watson report. Otherwise, the Compensation Committee accorded greater weight to the core peer group data in making decisions with respect to 2012 executive compensation, as the Compensation Committee believes our core peer companies are our primary source of, and competition for, executive talent.

Ultimately, the Compensation Committee views the information presented in the Towers Watson report as reflective of current compensation practices, but does not specifically target, or “benchmark,” any element of compensation or the total compensation paid to the named executive officers to base, justify or provide a framework for any compensation decision. Rather, the Compensation Committee continued to take into account the information presented by Towers Watson as one of many factors in making executive compensation decisions for 2012.

Components of and Decisions Concerning 2012 Executive Compensation

For fiscal year ended December 31, 2012, the principal components of compensation for our executives are described below, along with analysis of the decisions underlying compensation paid during the 2012 fiscal year:

Base Salary

We provide executives and other employees with base salaries to compensate them for services rendered during the fiscal year. Base salary levels are primarily the product of arms-length negotiations with the executives and, with respect to Messrs. Goncalves and McPherson, the minimum level of base salary provided for in their employment agreements with the Company. In general, base salary levels for executives are designed to recognize the experience, skills, knowledge and responsibilities required of executives in their respective roles. Base salaries are typically reviewed annually and are adjusted from time to time to take into account individual responsibilities, performance and experience, including the terms of any agreements we have in place with such executive officers.

For fiscal 2012, the Compensation Committee determined that the base salaries of our named executive officers should continue to remain at the levels established in July 2010, except for Mr. Krohn who received a $15,000 increase upon his promotion to Senior Vice President in January 2011. The Compensation Committee concluded that, because our named executive officers’ base salaries had been adjusted in the second half of 2010, they remained fair and competitive for 2012. The table below sets forth the base salaries paid to our named executive officers in 2012:


Name	Fiscal 2012 Base Salary ($)

C. Lourenco Goncalves	$	750,000
Robert C. McPherson III	$	350,000
Roger Krohn	$	300,000

The Compensation Committee determined that it remained appropriate in 2012 to set Mr. Goncalves’s base salary at a higher level than the salaries of the Company’s other named executive officers. In reaching that conclusion, the Compensation Committee took into account the Chief Executive Officer’s high level of responsibility for the Company’s overall performance, the general market range of chief executive officer salaries among companies in our peer group, and arms-length negotiations with Mr. Goncalves.

Cash Incentive Awards

Senior Executive Bonus Plan

On March 19, 2010, our Board of Directors adopted, and our stockholders approved, the Metals USA Holdings Corp. Senior Executive Bonus Plan (the “SEBP”). The SEBP is intended to reward superior work, to motivate covered key executives toward even greater achievement and business results, to tie their goals and interests to those of ours and our stockholders, and to enable us to attract and retain highly qualified executives. Under the SEBP, objectives are established for the calculation of annual cash bonuses for each executive, subject to Compensation Committee oversight and modification. Incentives under the SEBP are paid in cash and are typically paid in a single installment in the first quarter following the completion of a given fiscal year. Under the SEBP, the Company may award bonuses to key executives based upon such terms and conditions, and in such amounts, as the Compensation Committee may in its discretion determine. The Company may amend or terminate the SEBP at any time in its sole discretion.

All of our named executive officers participated in the SEBP during fiscal 2012. For fiscal 2012, the amounts that individual executives were awarded under the SEBP were determined as follows. Each executive was assigned a target bonus amount, expressed as a percentage of his base salary for the year. Messrs. McPherson and Krohn’s target bonus amounts were set at 70% of their respective base salaries. Mr. McPherson’s employment agreement with the Company provides that his target bonus shall be 70% of his base salary, and the Compensation Committee decided to set Mr. Krohn’s target bonus at the same level. Mr. Goncalves’s target bonus amount was set at 100% of his base salary, as set forth in his employment agreement with the Company. For more information regarding our named executive officers’ contractual arrangements with the Company, see “—Employment and Severance Agreements” below.

For Messrs. Goncalves and McPherson, the performance metric and target performance level that was established under the SEBP in respect of fiscal 2012 was based on the achievement of a certain Company Adjusted EBITDA target. Bonus potential ranged from a low of zero to an upper limit of 200% of target. For Mr. Krohn, the performance metric and target performance level that was established under the SEBP in respect of fiscal 2012 was based on the achievement of the Company Adjusted EBITDA target and a safety target. Bonus potential ranged from a low of zero to an upper limit of 200% of target. Target bonus as to 10% of Mr. Krohn’s base salary was dependent on the achievement of a safety goal (as measured by the Company’s Total Recordable Incident Rate calculated in accordance with Occupational Safety and Health Administration (“OHSA”) guidelines, which we refer to as “TRIR”). The TRIR for a given period of time is equal to the total man hours worked during such period divided by 200,000 divided by the total number of “OSHA Recordable Injuries” (as defined by OHSA guidelines) incurred. Under the terms of the SEBP, for purposes of the portion of annual bonus payable in respect of the safety metric, TRIR of 2.5 would result in a bonus of 100% of the safety metric target. For purposes of the portion of the annual bonus payable under the SEBP in respect of the Adjusted EBITDA targets, Company Adjusted EBITDA of $140.0 million would have resulted in payment of 100% of the bonus target dependent on that metric. No bonus in respect of the safety or EBITDA performance metric would have been payable if the target performance levels were not achieved.

The Compensation Committee then exercised its discretion in determining actual bonus payouts. It decided that Messrs. Goncalves and McPherson should receive additional discretionary cash bonuses of $264,562 and $25,192, respectively. In making these determinations, the Compensation Committee considered several factors, including the overall performance of the Company, whether a particular executive exceeded objectives and/or goals established for such executive, whether a particular executive made a unique contribution to the Company during the year, the compensation analysis presented by Towers Watson in 2010, and other factors traditionally considered by the Compensation Committee (such as profitability, workplace safety and the efficient use of capital).

Expressed in dollars, the Company awarded the following bonus amounts for fiscal 2012:


Name	2012 Target SEBP Compensation		2012 Actual SEBP Compensation		2012 Discretionary Bonus

C. Lourenco Goncalves	$	750,000	$	835,438	$	264,562
Robert C. McPherson III	$	245,000	$	274,808	$	25,192
Roger Krohn	$	210,000	$	160,000	$	—

Long-Term Equity Incentive Plan

On March 19, 2010, our Board of Directors adopted, and our stockholders approved, the Metals USA Holdings 2010 Long-Term Incentive Plan (the “2010 LTIP”). Through the 2010 LTIP, we provide long-term equity incentive awards to key employees, directors, consultants and other service providers, in order to reward and incentivize outstanding performance and to align the interests of such individuals with those of the stockholders. The 2010 LTIP is administered by the Compensation Committee, which has the authority to select individuals to whom awards may be granted, to determine the type of award, to determine the terms and conditions of any such awards, to interpret the terms and provisions of the 2010 LTIP and awards granted thereunder, and to otherwise administer the plan.

In determining the amount and frequency of such awards under the 2010 LTIP, the Compensation Committee considers several factors, including the linkage of officer incentives with the stockholders’ objectives, the impact of equity awards on executive retention, whether particular executives exceeded objectives and/or goals established for such executives, the compensation analysis presented by Towers Watson in 2010, and other factors traditionally considered by the Compensation Committee. Because equity awards are designed to motivate our executives to stay with the Company and increase stockholder value, the Compensation Committee generally does not consider an executive’s current stock or option holdings as a material component in making decisions for additional awards.

In late 2011, the Compensation Committee determined that all of our named executive officers, along with other participants in the 2010 LTIP, should receive annual grants of equity awards under the 2010 LTIP with the grants having a grant date of January 1, 2012.

The following table sets forth the awards received by our named executive officers under the 2010 LTIP granted on January 1, 2012:


Name	Shares of Restricted Common Stock		Shares Underlying Options to Purchase Common Stock

C. Lourenco Goncalves		30,000		120,000
Robert C. McPherson III		6,500		27,000
Roger Krohn		3,500		15,000

The option awards composed approximately 75% of the total value of the equity awards granted under the 2010 LTIP on January 1, 2012, and the restricted stock awards composed approximately 25% of the total value. In deciding to weight the equity awards in favor of options, the Compensation Committee considered recommendations presented by Towers Watson in 2010, but ultimately drew its own conclusions regarding the optimal method for incentivizing officers to enhance shareholder value.

Perquisites and Other Personal Benefits

We provide our named executive officers, and other employees generally, with perquisites and other personal benefits that we and the Compensation Committee believe are reasonable, competitive and which are consistent with the overall compensation program to enable us to attract and retain qualified employees for key positions. In addition, certain benefits for Messrs. Goncalves and McPherson were negotiated as part of their employment agreements. See footnote (6) to the Summary Compensation Table below for a description of the perquisites and other benefits for the named executive officers. The Compensation Committee periodically reviews the perquisites and other benefits provided to the executives, as well as the other employees.

401(k) plan

Our executive officers, including our named executive officers, are eligible to participate in our companywide 401(k) plan for salaried employees. Historically and through August 2009, the Company matched the first 2% of annual compensation contributed by participating employees. The Company suspended its matching payments in September 2009 except with respect to participating employees to whom such matching payments constitute a contractual obligation pursuant to a collective bargaining agreement. The Company reinstated the matching contribution, including the matching contributions to our named executive officers, in July 2010.

Tax Considerations

We consider the anticipated tax treatment of our executive compensation program when setting levels and types of compensation. Section 162(m) of the Internal Revenue Code (the “Code”) generally disallows a tax deduction to public companies for compensation paid to a company’s chief executive officer or any of its other three most highly compensated executive officers, other than the chief financial officer, in excess of $1 million in any year, with certain performance-based compensation being specifically exempt from this deduction limit. With respect to compensation paid pursuant certain to arrangements, including the SEBP and 2010 LTIP, we intend to rely, if necessary, on Treasury Regulation Section 1.162-27(f), which provides that the deduction limit of Section 162(m) of the Code does not apply to any remuneration paid pursuant to a compensation plan or agreement that existed during the period in which Metals USA Holdings was not publicly held. We may rely on this “grandfather” provision with respect to any particular plan or agreement until (a) the expiration of such plan or agreement, (b) the first material modification of such plan or agreement; (c) the issuance of all employer stock and other compensation that has been allocated under such plan, (d) the first meeting of our stockholders held to elect directors that occurs after 2013; or (e) such other date required by Section 162(m) of the Code.

While we consider the tax treatment of our executive compensation programs generally, the deductibility of compensation expense under Section 162(m) of the Code was not a material consideration for our Compensation Committee in 2012 due to the levels and types of compensation we paid in 2012.

Say-on-Pay Vote

In May 2011, at our annual meeting of stockholders, we held an advisory vote on the compensation of our named executive officers, commonly referred to as a “say-on-pay” vote. Our stockholders approved the compensation of our named executive officers, with over 94% of the votes present at our annual meeting of stockholders and entitled to vote on the proposal cast in favor of it. In considering executive compensation practices for 2012, the Compensation Committee did not believe it was necessary to make any material changes to our executive officer compensation policies in response to this vote.

Compensation Tables

Summary Compensation Table

The table below summarizes the total compensation paid or earned by each of the named executive officers for the fiscal years ended December 31, 2012, 2011 and 2010.


(a)	(b)		(c)		(d)		(e)		(f)		(g)		(h)		(i)
Name and Principal Position	Year		Salary (1)		Bonus (2)		Stock Awards (3)		Option Awards (4)		Non-Equity Incentive Plan Compensation (5)		All Other Compensation (6)		Total

C. Lourenco Goncalves		2012	$	750,000	$	287,682	$	337,500	$	725,982	$	835,438	$	185,022	$	3,121,624
Chairman, President and		2011	$	750,000	$	254,000	$	—	$	—	$	846,000	$	21,752	$	1,871,752
Chief Executive Officer		2010	$	687,500	$	631,130	$	592,650	$	1,263,650	$	—	$	251,260	$	3,426,190

Robert C. McPherson III		2012	$	350,000	$	30,344	$	73,125	$	163,346	$	274,808	$	75,707	$	967,330
Senior Vice President and		2011	$	350,000	$	23,640	$	—	$	—	$	276,360	$	35,604	$	685,604
Chief Financial Officer		2010	$	330,000	$	196,350	$	131,700	$	280,885	$	—	$	30,431	$	969,366

Roger Krohn		2012	$	300,000	$	2,744	$	39,375	$	90,748	$	160,000	$	26,029	$	618,896
Senior Vice President,		2011	$	300,000	$	—	$	—	$	—	$	235,000	$	—	$	535,000
Operations		2010	$	285,000	$	139,650	$	65,850	$	157,998	$	—	$	2,790	$	651,288

(1)

The amounts in column (c) reflect the base salaries paid to the named executive officers during fiscal 2012, 2011, and 2010. In 2010, the Compensation Committee increased base salary levels for the named executive officers effective July 1, 2010. Accordingly, the salary figures presented in column (c) for 2010 reflect that the named executive officers received lower base salaries from January 1 until July 1, 2010, and then received higher base salaries from July 1, 2010 until December 31, 2010.

(2)

The amounts in column (d) reflect the discretionary bonuses awarded to the named executive officers in 2012, 2011, and 2010 and special bonuses paid on outstanding stock options held by the named executive officers in the amount of $0.06 per share in November 2012 in connection with the payment of the Company’s quarterly dividend.

(3)

The amounts in column (e) reflect the fair value of stock awards granted in fiscal 2012 and 2010 in accordance with FASB ASC Topic 718. There were no stock awards granted in 2011. For further information about such awards, see “—Compensation Discussion and Analysis—Long Term Equity Incentive Plan” above.

(4)

The amounts in column (f) reflect the fair value of option awards granted in fiscal 2012 and 2010 in accordance with FASB ASC Topic 718. There were no option awards granted in 2011. For further information about such awards, see “—Compensation Discussion and Analysis—Long Term Equity Incentive Plan” above.

(5)

The amounts in column (g) reflect the cash incentive plan awards to the named executive officers in 2012 and 2011. There were no cash incentive plan awards to the named executive officers in 2010 under the SEBP or otherwise. The discretionary bonuses paid to the named executive officers in 2012, 2011 and 2010 under the SEBP are reported in column (d).

(6)	The amounts in column (h) reflect the following for each named executive officer for the fiscal year ended December 31, 2012:


Name	Total Perquisites and Personal Benefits		Other Compensation

C. Lourenco Goncalves	$	176,972	$	8,050
Robert C. McPherson III	$	70,117	$	5,590
Roger Krohn	$	20,769	$	5,260

Perquisites and personal benefits consist of the following:

•

the amount attributable to Company reimbursements for club dues payable by the named executive officer; and

•

the amount of income taxes paid by the Company on behalf of the named executive officer for club dues; and

•

the amounts attributable to Company reimbursements for medical insurance premiums; and

•

the amounts attributable to unused vacation pay for the named executive officers, of which Messrs. Goncalves and McPherson were paid $126,528 and $27,108, respectively, during 2012; and

•

the amounts attributable to reimbursements for relocation costs, of which $32,594 was reimbursed to Mr. McPherson during 2012.

Other compensation consists of the following:

•

matching contributions allocated by the Company to the named executive officers pursuant to the Metals USA 401(k) Plan; and

•

dividends in the amount of $0.06 per share paid in November 2012 on outstanding unvested restricted stock awards held by the named executive officers in connection with the payment of the Company’s quarterly dividend.

Grants of Plan-Based Awards

The following table sets forth the amounts grants of equity and non-equity incentive plan awards made to our named executive officers in fiscal 2012:


(a)	(b)		(c)		(d)		(e)		(f)		(g)		(h)		(i)
Name	Grant Date		Estimated Future Payouts Under Non- Equity Incentive Plan Awards (1)						All Other Stock Awards: Number of Shares of Stock or Units		All Other Option Awards: Number of Securities Underlying Options		Exercise or Base Price of Option Awards		Grant Date Fair Value of Stock and Option Awards
Name	Grant Date		Threshold		Target		Maximum		All Other Stock Awards: Number of Shares of Stock or Units				Exercise or Base Price of Option Awards		Grant Date Fair Value of Stock and Option Awards

C. Lourenco Goncalves		1/1/2012	$	—	$	750,000	$	1,500,000		30,000		120,000	$	11.25	$	1,063,482
Robert C. McPherson III		1/1/2012	$	—	$	245,000	$	490,000		6,500		27,000	$	11.25	$	236,471
Roger Krohn		1/1/2012	$	—	$	210,000	$	420,000		3,500		15,000	$	11.25	$	130,123

(1)

Represents threshold, target and maximum amounts payable to each of our executive officers upon achievement of certain performance metrics established by the Compensation Committee under the SEBP. For more information about such performance metrics, see “—Compensation Discussion and Analysis—Cash Incentive Awards.” For the actual amounts of cash awards paid to our named executive officers in fiscal 2012, see “—Compensation Discussion and Analysis—Cash Incentive Awards” and “—Summary Compensation Table.”

Outstanding Equity Awards at Fiscal Year-End

The following table sets forth all outstanding equity awards to our named executive officers as of the end of fiscal 2012:


(a)	(b)		(c)			(d)		(e)		(f)			(g)
	Option Awards									Stock Awards
Name	Number of Securities Underlying Unexercised Options - Exercisable		Number of Securities Underlying Unexercised Options - Unexercisable			Option Exercise Price		Option Expiration Date		Number of Shares or Units of Stock That Have Not Vested			Market Value of Shares or Units of Stock That Have Not Vested
C. Lourenco Goncalves		85,331		—		$	2.30		11/30/2015		—			—
		90,000		90,000	(1)	$	13.17		7/1/2020		22,500	(2)	$	393,525	(5)
		30,000		90,000	(3)	$	11.25		1/1/2022		22,500	(4)	$	393,525	(5)
Robert C. McPherson III		18,863		—		$	2.30		11/30/2015		—			—
		20,000		20,000		$	13.17		7/1/2020		5,000		$	87,450	(5)
		6,750		20,250		$	11.25		1/1/2022		4,875		$	85,264	(5)
Roger Krohn		8,236		—		$	2.30		11/30/2015		—			—
		11,250		11,250		$	13.17		7/1/2020		2,500		$	43,725	(5)
		3,750		11,250		$	11.25		1/1/2022		2,625		$	45,911	(5)

(1)	Option vests at the rate of 25% per year, with the first vesting date occurring on July 1, 2011.

(2)	Restricted stock vests at the rate of 25% per year, with the first vesting date occurring on July 1, 2011.

(3)	Option vests at the rate of 25% per year, with the first vesting date occurring on December 21, 2012, and each January 1, 2014, 2015 and 2016 thereafter.

(4)	Restricted stock vests at the rate of 25% per year, with the first vesting date occurring on December 21, 2012, and each January 1, 2014, 2015 and 2016 thereafter.

(5)	The value has been calculated based on the closing stock price as of December 31, 2012 of $17.49.

Option Exercises and Stock Vesting

None of our named executive officers exercised options during fiscal 2012. The table below sets forth information regarding shares acquired upon the vesting of restricted stock awards during fiscal 2012.


	Outstanding Restricted Stock Awards
Name	Number of Shares Acquired on Vesting (#)		Value Realized on Vesting ($) (1)

C. Lourenco Goncalves		18,750	$	306,113
Robert C. McPherson III		4,125	$	67,319
Roger Krohn		2,125	$	34,719

(1)	The value has been calculated based on the closing stock price as of the June 29, 2012 and December 21, 2012 vesting dates.

Employment and Severance Agreements

Messrs. Goncalves and McPherson have employment agreements, and Mr. Krohn has a severance agreement, with the Company.

Under his employment agreement with the Company, Mr. Goncalves agreed to serve until December 31, 2014, unless terminated earlier under the terms of the agreement. Mr. Goncalves is entitled to receive an initial annual base salary of $750,000, and as of fiscal year 2012, the Compensation Committee of the Board of Directors reviews his base salary on an annual basis to determine if it should be increased. Mr. Goncalves is eligible throughout the term of his employment agreement to earn a target bonus of 100% per year of his base salary, based on the Company’s achievement of specified performance objectives. Additionally, on March 8, 2013, Metals USA Holdings entered into a separation agreement and general release which provides that Mr. Goncalves’ employment with Metals USA Holdings will be terminated without cause immediately prior to the effective time of the Merger which would entitle Mr. Goncalves to receive the severance payments and benefits under the terms of his employment agreement with Metals USA Holdings for a “qualifying termination of employment” as defined below.

Under his employment agreement with the Company, Mr. McPherson is entitled to receive an initial annual base salary of $300,000 and is eligible for an annual bonus of 70% of his base salary under the SEBP. The initial term of the employment agreement has been and will continue to be automatically renewed for successive one-year periods unless 90 days’ prior notice of termination is given by either party.

Each of Messrs. Goncalves and McPherson is party to an employment agreement that provides severance benefits in the event that his respective employment is terminated by the Company without cause or by him for good reason at any time during the employment period (we refer to such a termination as a “qualifying termination of employment”).

As noted above, Metals USA Holdings and Mr. Goncalves agreed that Mr. Goncalves’ employment with Metals USA Holdings will be terminated without cause immediately prior to the effective time of the Merger, which would entitle Mr. Goncalves to receive, in addition to any accrued and unpaid compensation and benefits through the date of termination:

•

a lump sum equal to one year of his annual base salary;

•

an amount equal to one year of his annual base salary payable in accordance with the Company’s regular payroll schedule over a twelve month period commencing in the thirteenth month following the termination of his employment;

•

a lump sum payment of $307,398, representing a pro-rated bonus for the year in which the termination of employment occurs, which amount will increase by $3,014 for each day after April 12, 2013 on which the closing occurs;

•

a lump sum payment of $1.1 million in March 2015 and a lump sum payment of $1.1 million in March 2016, representing a bonus for each of the two fiscal years after the fiscal year in which the termination of employment occurs; and

•

at his election to continue his and his beneficiaries’ participation in the Company’s medical benefit plan in which they participated prior to the date of termination, and reimbursement for the cost of COBRA continuation coverage for a period of up to eighteen months.

Upon a qualifying termination of employment, Mr. McPherson is entitled to receive, in addition to any accrued and unpaid compensation and benefits through the date of termination:

•

a lump sum payment equal to eighteen months of annual base salary (such payments to be repaid by Mr. McPherson if he violates the terms of his employment agreement);

•

a pro-rated bonus for the year in which the termination of employment occurs, based on actual performance for such year; and

•

In addition, Mr. Goncalves is subject to certain restrictions on his ability to compete with the Company for two years or solicit its customers or employees for two years after the date of termination, while Mr. McPherson is subject to certain restrictions on his ability to compete with the Company for eighteen months or solicit its customers or employees for two years after his termination of employment.

Mr. Krohn is subject to a severance agreement with the Company that provides that in the event of a qualifying termination of employment, Mr. Krohn is entitled to receive, in addition to any accrued and unpaid compensation and benefits through the date of termination, his annual base salary for a period of twelve months following his termination of employment (such payments to cease if he violates any material terms of his severance agreement prior to such time) and, at his election to continue his and his beneficiaries’ participation in the Company’s medical benefits plan in which they participated prior to the date of termination, reimbursement for the cost of COBRA continuation coverage for a period of up to twelve months. Additionally, Mr. Krohn is subject to certain restrictions on his ability to compete with the Company for one year (or two years in the event that his employment is terminated for cause or he resigns without good reason) and to solicit the Company’s customers or employees for two years after his termination.

For purposes of Messrs. Goncalves and McPherson’s employment agreements and Mr. Krohn’s severance agreement:

•

“good reason” is generally defined to mean:

•

a reduction in annual base salary;

•

a material diminution of the executive officer’s responsibilities;

•

a relocation of the executive officer’s primary work place beyond a 50 mile radius from its current location;

•

a material breach by the Company of the respective agreement; and

•

for Mr. Goncalves, (i) a reduction is his opportunity for a bonus, (ii) the requirement to report to any person who in turn reports to the board, (iii) the Company’s failure to appoint Mr. Goncalves as chairman, chief executive officer and president of certain of the Company’s subsidiaries, and (iv) the Company’s failure to nominate Mr. Goncalves for election to the board of directors or as its chairman.

•

“cause” is generally defined to mean:

•

the commission of a felony or a crime of moral turpitude;

•

the commission of a willful and material act of dishonesty involving the Company or any of its subsidiaries;

•

any material breach of the written policies or procedures of the Company or any of its subsidiaries which causes material harm to the Company or its subsidiaries;

•

any other willful misconduct that causes material harm to the Company, any of its subsidiaries, or the business reputation of any of the foregoing entities; or

•

a material breach of the executive’s obligations under the respective agreement.

Each of the officers will be subject to certain restrictions on the ability of such officer to compete with us and to solicit our customers or employees. In addition, each of the officers is a party to restricted stock award agreements and stock option award agreements that provide for immediate vesting of all unvested restricted stock and options upon a “change of control” (as defined in such agreements and/or the 2010 LTIP). We have summarized and quantified below the estimated payments that would be made to each officer under the agreements described above, assuming a triggering event occurred on December 31, 2012, and with respect to a change of control, if the Merger with Reliance was consummated on April 12, 2013. The changed circumstances resulting from the Company becoming a wholly-owned subsidiary of Reliance as a result of the Merger could result in the employment of the executives being terminated thereafter on a basis entitling them to severance payments. Mr. Goncalves intends to resign from the Company upon the closing of the Merger, which would entitle him to certain severance payments described below.

Potential Payments upon Termination or Change of Control

Our employment and severance agreements are described under “—Employment and Severance Agreements” above.

If (1) each of our named executive officers terminated his employment for “good reason” or was terminated other than for “cause,” death or disability, or for Mr. Goncalves, upon the expiration of his current contract on December 31, 2014, or for Mr. McPherson, if we elected not to renew his employment agreement; or (2) each of our named executive officers was terminated as a result of death or disability or (3) a “change of control” occurred as of December 31, 2012 (and the named executive officers were terminated immediately thereafter on a basis entitling them to severance payments), our named executive officers would be paid the following amounts, respectively:


	Good Reason Termination or Involuntary without Cause Termination on December 31, 2012		Death or Disability on December 31, 2012		Change of Control on December 31, 2012
C. Lourenco Goncalves:
Compensation
Accrued Salary	$	17,308	$	17,308	$	17,308
Accrued Bonus (Incentive Plan)		1,100,000		1,100,000		1,100,000
Annual Bonus (Incentive Plan) for two years after termination (1)		2,200,000		—		—
Lump Sum Salary (12 months)		750,000		750,000		—
Monthly Salary (12 months)		750,000		—		—
Benefits and Perquisites
Health and Welfare Benefits		26,766		26,766		26,766
Disability Income (2)		—		1,576,886		—
Life Insurance Benefits (3)		—		400,000		—
Accrued Vacation Pay		4,165		4,165		4,165
Long-Term Incentives:
Stock Options (4)		—		—		2,822,578
Restricted Stock Grants (5)		—		—		787,050

Robert C. McPherson III:
Compensation
Accrued Salary	$	6,731	$	6,731	$	6,731
Accrued Bonus (Incentive Plan)		300,000		300,000		300,000
Lump Sum Salary (12 months)		—		350,000		—
Monthly Salary (18 months)		525,000		—		—
Benefits and Perquisites
Health and Welfare Benefits		17,844		17,844		17,844
Disability Income (2)		—		2,097,413		—
Life Insurance Benefits (3)		—		400,000		—
Accrued Vacation Pay		1,910		1,910		1,910
Long-Term Incentives:
Stock Options (4)		—		—		627,809
Restricted Stock Grants (5)		—		—		172,714

Roger Krohn:
Compensation
Accrued Salary	$	5,769	$	5,769	$	5,769
Accrued Bonus (Incentive Plan)		235,000		235,000		235,000
Monthly Salary (12 months)		300,000		—		—
Benefits and Perquisites
Health and Welfare Benefits		17,844		17,844		17,844
Disability Income (2)		—		896,405		—
Life Insurance Benefits (3)		—		400,000		—
Accrued Vacation Pay		27,698		27,698		27,698
Long-Term Incentives:
Stock Options (4)		—		—		315,905
Restricted Stock Grants (5)		—		—		89,636

(1)

Mr. Goncalves is entitled to a bonus for each of the two fiscal years following the fiscal year in which termination occurs as calculated under the SEBP for the applicable fiscal year based on the Company’s achievement of the specified performance objectives set forth under the SEBP. The amounts in the table above are the agreed upon amount of the estimated bonus for each of 2014 and 2015 (the two years following the year of termination) pursuant to Mr. Goncalves’ separation agreement and general release of claims, which provides for a payment of $1,100,000 for each of those two fiscal years.

(2)	Reflects the maximum lump-sum present value of all future payments each named executive would be entitled to receive under the Company’s disability program. Each named executive would be entitled to receive benefits until he reaches age 65.

(3)	Reflects the maximum lump-sum amount of $200,000 payable to each named executive’s beneficiaries upon his death plus the maximum lump-sum amount of $200,000 payable in the event of accidental death under the Company’s life insurance program.

(4)	Reflects the estimated value of options that would immediately vest upon a “change of control,” and assumes that any “under water” options would be cancelled.

(5)	Reflects the value of restricted stock awards that immediately vest upon a “change of control.” The value has been calculated based on the closing stock price as of December 31, 2012 of $17.49.

Change of Control Compensation in Connection with the Merger

The amounts indicated below are estimates of amounts that would be payable assuming that the Merger with Reliance were consummated on April 12, 2013 and, with respect to Messrs. McPherson and Krohn, that the employment of Messrs. McPherson and Krohn were terminated immediately thereafter on a basis entitling them to severance payments. As noted above, Mr. Goncalves’ employment will be terminated immediately prior to the effective time of the Merger. These estimates are based on multiple assumptions that may or may not actually occur, including the assumption that the employment of each of Messrs. McPherson and Krohn will be terminated on a basis entitling them to severance payments. Some of these assumptions are based on information not currently available and, as a result, the actual amounts, if any, to be received by Messrs. McPherson and Krohn may differ in material respects from the amounts set forth below. The amounts set forth below for Mr. Goncalves were agreed upon by Metals USA Holdings in the separation agreement and general release entered into on March 8, 2013.

Change of Control Compensation


Name	Cash⁽¹⁾		Equity⁽²⁾		Benefits⁽³⁾		Total
C. Lourenco Goncalves Chairman, President and Chief Executive Officer	$	4,007,398	$	2,848,028	$	66,539	$	6,921,965
Robert C. McPherson III Senior Vice President and Chief Financial Officer		608,836		632,664		33,459		1,274,959
Roger Krohn Senior Vice President, Operations		300,000		344,259		52,910		697,169

(1)

The named executive officers are entitled to severance payments upon a qualifying termination of employment as described above. Although, in the case of Messrs. McPherson and Krohn, the cash severance payments and benefits are not directly related to the Merger, this table assumes that a qualifying termination of employment would occur following consummation of the Merger. Therefore, for purposes of this table these cash severance payments are presented as “double trigger” payments. The severance benefits are subject to the named executive officer’s execution (and non-revocation) of a general release of claims against the Company. Generally, the named executive officers are subject to covenants of non-competition and non-solicitation of the Company’s employees and customers during employment and for a period of up to two years thereafter, and to perpetual duties of confidentiality and non-disparagement. As noted above, Metals USA Holdings and Mr. Goncalves agreed that Mr. Goncalves’ termination of employment with Metals USA Holdings immediately prior to the effective time of the Merger will be a qualifying termination event. As required by his employment agreement, Mr. Goncalves executed an agreement which included a general release of claims on March 8, 2013. The severance payments disclosed in this column consist, for each named executive officer, of the following components paid in cash:


Name	Base Salary		Additional Salary Payments		Pro-Rated Target Bonus		Bonus for 2014 and 2015		Total
C. Lourenco Goncalves	$	750,000	$	750,000	$	307,398	$	2,200,000	$	4,007,398
Robert C. McPherson III		350,000		175,000	$	83,836		—		608,836
Roger Krohn		300,000		—		—		—		300,000

Mr. Goncalves is entitled to a bonus for each of the two fiscal years following the fiscal year in which termination occurs as calculated under the Company’s SEBP for the applicable fiscal year based on the Company’s achievement of the specified performance objectives set forth under the SEBP. The amount in the column above entitled “Bonus for 2014 and 2015” represents the amount agreed to pursuant to Mr. Goncalves’ separation agreement and general release of claims, and is based upon the $1,100,000 annual bonus paid to Mr. Goncalves in respect of calendar year 2012 under the SEBP.

(2)	In accordance with the Merger Agreement and the terms of the equity awards granted to the named executive officers under the 2010 LTIP, the outstanding equity awards held by named executive officers vest upon completion of the Merger. Amounts in the

table reflect only the value of unvested awards, the vesting of which will be accelerated upon the consummation of the Merger. The acceleration of the outstanding equity awards is deemed to be “single-trigger” because it will occur at the effective time of the Merger, regardless of whether the named executive officer’s employment is terminated. Amounts in the table represent the amounts payable in cash for each unvested stock option and restricted share of common stock held by the named executive officers.

The number and value of unvested, “in-the-money” stock options and restricted shares of common stock held by the named executive officers that would be entitled to accelerated vesting in the Merger are set forth below. The value of each stock option is calculated as the difference between (a) $20.65 and (b) the exercise price of each of the unvested stock options. The value of each share of restricted share of common stock is $20.65.


Name	Number of Unvested Stock Options		Value of Unvested Stock Options ($)		Number of Shares of Restricted Stock		Value of Shares of Restricted Stock ($)
C. Lourenco Goncalves		180,000	$	1,519,200		64,350	$	1,328,828
Robert C. McPherson III		40,250		339,950		14,175		292,714
Roger Krohn		22,500		189,900		7,475		154,359

(3)

The named executive officers are entitled to post-employment medical benefits in the form of Company-paid COBRA continuation coverage for up to 18 months, in the case of Mr. Goncalves, and 12 months, in the case of Messrs. McPherson and Krohn, following the date of the qualifying termination of employment. As with cash severance payments, this benefit is subject to the named executive officer’s execution (and non-revocation) of a general release of claims against the Company and its subsidiaries.

BOARD COMPENSATION COMMITTEE REPORT ON EXECUTIVE COMPENSATION

The Compensation Committee of the Company has reviewed and discussed the foregoing Compensation Discussion and Analysis required by Item 402(b) of Regulation S-K with management and, based upon such review and discussions, the Compensation Committee recommended to the Board that the Compensation Discussion and Analysis be included in the Company’s Annual Report on Form 10-K for the 2012 fiscal year.

THE COMPENSATION COMMITTEE

M. Ali Rashid, Chairman

Matthew R. Michelini

Eric L. Press

Non-Executive Director Compensation for 2012

The table below summarizes the compensation paid by the Company to non-employee directors for the fiscal year ended December 31, 2012.


(a)	(b)		(c)		(d)		(e)		(f)
Name (1)	Fees Earned or Paid in Cash		Stock Awards (2)		Option Awards (3)		All Other Compensation (4)		Total
Eric L. Press	$	150,000	$	28,125	$	54,961	$	5,909	$	238,995
M. Ali Rashid	$	250,625	$	28,125	$	54,961	$	5,909	$	339,620
Matthew R. Michelini	$	150,000	$	28,125	$	54,961	$	1,725	$	234,811
John T. Baldwin	$	175,625	$	28,125	$	54,961	$	5,909	$	264,620
Larry K. Powers	$	160,000	$	28,125	$	54,961	$	1,725	$	244,811
Mark A. Slaven	$	162,500	$	28,125	$	54,961	$	1,725	$	247,311

(1)

C. Lourenco Goncalves, the Company’s Chairman of the Board, President and Chief Executive Officer, is not included in this table as he is an employee of the Company and thus receives no compensation for his services as a director. The compensation received by Mr. Goncalves as an employee of the Company is shown in the Summary Compensation Table above.

(2)

The amounts in column (c) reflect the fair value of stock awards granted in fiscal 2012 in accordance with FASB ASC Topic 718. As of December 31, 2012, the following non-executive officer directors had the following number of stock awards outstanding: Eric L. Press: 2,501; M. Ali Rashid: 2,501; Matthew R. Michelini: 2,501; John T. Baldwin: 2,501; Larry K. Powers: 2,501; and Mark A. Slaven: 2,501.

(3)

The amounts in column (d) reflect the fair value of option awards granted during fiscal 2012 in accordance with FASB ASC Topic 718. As of December 31, 2012, the following non-executive officer directors had the following number of options outstanding: Eric L. Press: 94,724; M. Ali Rashid: 94,724; Matthew R. Michelini: 25,000; John T. Baldwin: 94,724; Larry K. Powers: 25,000; and Mark A. Slaven: 25,000.

(4)

Other compensation consists of dividends in the amount of $0.06 per share paid in November 2012 on outstanding unvested restricted stock awards held by the non-executive officer directors, in addition to special payments in the amount of $0.06 per share paid in November 2012 on outstanding stock options held by the non-executive directors in connection with the payment of the Company’s quarterly dividend.

Compensation of Directors

We currently compensate our directors with an annual retainer of $60,000, paid quarterly in advance of each fiscal quarter of service. During 2012, each director also received a fee of $2,500 per board meeting attended and $2,500 for each regularly scheduled committee meeting. The non-management chairman of each the Audit Committee, Compensation Committee, Nominating/Governance Committee, and Executive Committee receives an additional annual retainer of $12,500. All reasonable out-of-pocket expenses are reimbursed upon submission of support documentation.

We also compensate our directors through annual grants of equity under the 2010 LTIP. The awards made in 2012 under the 2010 LTIP are shown in the table above.

Compensation Committee Interlocks and Insider Participation

None of the Compensation Committee’s members is or has been a Company officer or employee. During fiscal 2012, none of the Company’s executive officers served on the board of directors, the Compensation Committee or any similar committee of another entity of which an executive officer served on our Board of Directors or Compensation Committee.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

This table shows how much common stock is owned by (i) each director of the Company, (ii) the Company’s named executive officers, (iii) all executive officers and directors of the Company as a group and (iv) all persons who are known to own beneficially more than 5% of the Company’s common stock, as of March 8, 2013. Unless otherwise specified, the address for each of them is 2400 Commercial Blvd., Suite 905, Fort Lauderdale, Florida 33308.


Name of Beneficial Owner	Number of Shares Beneficially Owned (1)		Percentage of Shares Outstanding (2)

*Named Executive Officers:*
C. Lourenco Goncalves		1,426,166		3.81	%
Robert C. McPherson, III		98,954			*
Roger Krohn		163,817			*

*Directors:*
Eric L. Press (3)		93,124			*
M. Ali Rashid (3)		93,124			*
Matthew R. Michelini (4)		23,400			*
John T. Baldwin (5)		93,124			*
Larry K. Powers (6)		23,400			*
Mark A. Slaven (6)		23,400			*

*All executive officers and directors as a group (9 persons)*		2,038,509		5.38	%

*5% Stockholders:*
Apollo Funds		19,728,650		53.13	%
Tempus Quo Capital Management, LLC		3,707,596		9.98	%
Ameriprise Financial Inc		2,053,604		5.53	%

*	Less than 1%

(1)

The amounts and percentages of interests beneficially owned are reported on the basis of regulations of the SEC governing the determination of beneficial ownership of securities. Under the rules of the SEC, a person is deemed to be a “beneficial owner” of a security if that person has or shares voting power, which includes the power to vote or direct the voting of such security, or investment power, which includes the power to dispose of or to direct the disposition of such security. A person is also deemed to be a beneficial owner of any securities of which that person has a right to acquire beneficial ownership within 60 days. Securities that can be so acquired are deemed to be outstanding for purposes of computing such person’s ownership percentage, but not for purposes of computing any other person’s percentage. Under these rules, more than one person may be deemed beneficial owner of the same securities and a person may be deemed to be a beneficial owner of securities as to which such person has no economic interest. Except as otherwise indicated in these footnotes, each of the beneficial owners has, to our knowledge, sole voting and investment power with respect to the indicated ownership interests.

(2)	Percentages are based on 37,310,116 shares outstanding on March 8, 2013, plus, for each person, the shares which would be issued assuming that such person exercises all options it holds which are exercisable within 60 days.

(3)

Represents 8,400 restricted share units and 84,724 shares issuable upon exercise of options. Each of Messrs. Press and Rashid, who have relationships with Apollo, disclaim beneficial ownership of all shares of the common stock of record by any of the Apollo Funds in excess of their pecuniary interests, if any. The address of Messrs. Press and Rashid is c/o Apollo Management, L.P., 9 West 57^th Street, New York, New York 10019.

(4)

Represents 8,400 restricted share units and 15,000 shares issuable upon exercise of options. Mr. Michelini, who has a relationship with Apollo, disclaims beneficial ownership of all shares of the common stock of record by any of the Apollo Funds in excess of his pecuniary interest, if any. The address of Mr. Michelini is c/o Apollo Management, L.P., 9 West 57^th Street, New York, New York 10019.

(5)	Represents 8,400 restricted share units and 84,724 shares issuable upon exercise of options.

(6)	Represents 8,400 restricted share units and 15,000 shares issuable upon exercise of options.

(7)

Based on information set forth in a report on Schedule 13G filed with the SEC on February 14, 2013, the Apollo Funds beneficially own an aggregate of 19,728,650 shares of our common stock, of which (i) 16,923,944 shares are held of record by Apollo Investment Fund V, L.P. (“AIF V”); (ii) 2,222,650 shares are held of record by Apollo Overseas Partners V, L.P. (“Overseas V”); (iii) 233,078 shares are held of record by Apollo Netherlands Partners V (A), L.P. (“Netherlands A”); (iv) 164,257 shares are held of record by Apollo Netherlands Partners V (B), L.P. (“Netherlands B”); and (v) 184,721 shares are held of record by Apollo German Partners V GmbH & Co. KG (“German V,” and together with AIF V, Overseas V, Netherlands A and Netherlands B, the “Apollo Funds”). Apollo Management V, L.P. (“Management V”) is the manager of AIF V, Overseas V, Netherlands A and Netherlands B, and is a special limited partner of German V and the sole shareholder of Apollo Verwaltungs V GmbH (“Apollo German GP”), the general partner of German V. AIF V Management, LLC (“AIF V LLC”) is the general partner of Management V. Apollo Management, L.P. (“Apollo Management”) is the sole member and manager of AIF V LLC, and Apollo Management GP, LLC (“Management GP”) is the general partner of Apollo Management. Apollo Management Holdings, L.P. (“Management Holdings”) is the sole member and manager of Management GP, and Apollo Management Holdings GP, LLC (“Holdings GP”) is the general partner of Management Holdings. Apollo Advisors V, L.P. (“Advisors V”) is the general partner of AIF V, Netherlands A and Netherlands B, and is the managing general partner of Overseas V and a special limited partner of German V. Apollo Capital Management V, Inc. (“Capital Management V”) is the general partner of Advisors V. Apollo Principal Holdings I, L.P. (“Principal I”) is the sole stockholder of Capital Management, and Apollo Principal Holdings I GP, LLC (“Principal I GP”) is the general partner of Principal I. Leon Black, Joshua Harris and Marc Rowan are the managers of Principal I GP, and the managers as well as principal executive officers of Management Holdings GP, and as such may be deemed to have voting and dispositive control of the shares of our common stock held by the Apollo Funds. The address of AIF V, Advisors V, Capital Management V, Principal I and Principal I GP is One Manhattanville Road, Suite 201, Purchase, New York 10577. The address of Overseas V, Netherlands A and Netherlands B is c/o Intertrust Corporate Services (Cayman) Limited, 190 Elgin, George Town, Grand Cayman KY1-9005, Cayman Islands. The address of German V and Apollo German GP is Eschenheimer Anlage 1, 60316 Frankfurt, Germany. The address of Management V, AIF V LLC, Apollo Management, Management GP, Management Holdings and Holdings GP, and Messrs. Black, Harris and Rowan, is 9 W. 57^th Street, 43^rd Floor, New York, New York 10019.

(8)

Based on information set forth in a report on Schedule 13G/A filed with the SEC on February 14, 2013 by Tempus Quo Capital Management, LLC (“Tempus Quo”). Tempus Quo holds shared voting and dispositive power of 3,707,596 shares, resulting in beneficial ownership of 3,707,596 shares. The address of Tempus Quo is 3050 Aventura Blvd., Suite 200, Aventura, Florida 33180.

(9)

Based on information set forth in a report on Schedule 13G/A filed with the SEC on February 13, 2013 by Ameriprise Financial Inc. (“Ameriprise”) and its subsidiary, Columbia Management Investment Advisers, LLC (“Columbia”). Each of Ameriprise and Columbia hold shared voting power of 697,504 shares and shared dispositive power of 2,053,604 shares, resulting in beneficial ownership of 2,053,604 shares. The address of Ameriprise is 145 Ameriprise Financial Center, Minneapolis, MN 55474, and the address of Columbia is 225 Franklin St., Boston, MA 02110.

Item 13. Certain Relationships and Related Transactions and Director Independence

Procedures for Reviewing Related Person Transactions

The Audit Committee charter provides that the Audit Committee shall review all related person transactions, and all such transactions must be approved or ratified by the Audit Committee. For this purpose, a related person transaction means any transaction, arrangement or relationship in which the Company is a participant, the amount involved exceeds $120,000, and one of our executive officers, directors, director nominees or 5% stockholders (or their immediate family members). In addition, our Code of Business Conduct and Ethics requires all directors, executive officers and employees to avoid conflicts, and the appearance of conflicts between their own interests and their responsibilities to the Company or its clients. The Company has not entered into any related person transactions during 2012 required to be disclosed under SEC rules.

Investors Rights Agreement

The Company has entered into an Amended and Restated Investors Rights Agreement with investment funds affiliated with Apollo and each of our management members (the “Amended and Restated Investors Rights Agreement”) that provides for, among other things, a restriction on the transferability of each management member’s equity ownership in the Company, demand registration rights for Apollo, piggyback registration rights, repurchase rights by the Company and Apollo with respect to management’s equity in certain circumstances, demand registration rights for Apollo, certain restrictions on each such person’s ability to compete with us or solicit our employees or customers and board termination rights and information rights for Apollo.

As discussed above, the Amended and Restated Investors Rights Agreement provides that, except as otherwise required by applicable law, Apollo has the right to nominate (a) four directors as long as Apollo owns (including shares of common stock issuable under the terms of any exchangeable securities issued by us) at least 30% but less than 50% of our outstanding common stock, (b) three directors as long as Apollo owns (including shares of common stock issuable under the terms of any exchangeable securities issued by us) at least 20% but less than 30% of our outstanding common stock and (c) two directors as long as Apollo owns (including shares of common stock issuable under the terms of any exchangeable securities issued by us) at least 10% but less than 20% of our outstanding common stock. In the event that the Board increases its size beyond nine members, Apollo’s nomination rights will be proportionately increased, rounded up to the nearest whole number. The Amended and Restated Investors Rights Agreement also provides that, except as otherwise required by applicable law, we and the management members will take all action within their respective power to cause all such nominees to be included in the slate of nominees recommended by the Board to the Company’s stockholders for election as directors at each annual meeting of our stockholders and we will use all reasonable efforts to cause the election of each such nominee, including soliciting proxies in favor of the election of such nominees.

The Amended and Restated Investors Rights Agreement provides that, except as otherwise required by applicable law, Apollo will have the right to designate a replacement to fill a vacancy on the Board that was nominated by Apollo, and will provide that, except as otherwise required by applicable law, we will take all action within our power to cause such vacancy to be filled by the replacement designated by Apollo (including by promptly appointing such designee to the Board).

The Amended and Restated Investor Rights Agreement provides that Apollo may make one or more written demands of us to require us to register the shares of our common stock owned by Apollo. In addition, Apollo and our management members will have piggyback rights entitling them to require us to register shares of our common stock owned by them in connection with any registration statements filed by us, subject to certain exceptions. We have agreed to indemnify Apollo and the management members (to the extent they are selling stockholders in any such registration) against losses suffered by them in connection with any untrue or alleged untrue statement of a material fact contained in any registration statement, prospectus or preliminary prospectus or any omission or alleged omission to state therein a material fact required to be stated therein or necessary to make the statement therein not misleading, except insofar as the same may be caused by or contained in any information furnished in writing to us by such selling holder for use therein.

The Amended and Restated Investors Rights Agreement was negotiated among management, us and Apollo, and we believe it is on arm’s-length terms.

Director Independence

We are a “controlled company” within the meaning of NYSE corporate governance rules. Under NYSE corporate governance rules, a company of which more than 50% of the voting power is held by an individual, group or another company is a “controlled company” and may elect not to comply with certain NYSE corporate governance requirements, including:

•

the requirement that a majority of the board of directors consists of independent directors;

•

the requirement that we have a Nominating/Governance Committee that is composed entirely of independent directors with a written charter addressing the committee’s purpose and responsibilities;

•

the requirement that we have a Compensation Committee that is composed entirely of independent directors with a written charter addressing the committee’s purpose and responsibilities; and

•

the requirement for an annual performance evaluation of the Nominating/Governance and Compensation Committees.

We utilize the exemptions from NYSE corporate governance requirements, including the foregoing. As a result, we do not have a majority of independent directors, our Nominating/Governance and Compensation Committees do not consist entirely of independent directors, and we are not required to have an annual performance evaluation of the Nominating/Governance and Compensation Committees. Nonetheless, our Board of Directors has determined that three of our seven directors—Messrs. Baldwin, Powers and Slaven—are independent under the NYSE’s listing standards. In making this determination, our Board of Directors has affirmatively determined that each of these directors meets the objective criteria for independence set forth by the NYSE, as well as the additional independence requirements imposed by the SEC for Audit Committee members which are incorporated into the NYSE’s listing standards, and that none of them has any relationship, direct or indirect, to us other than as stockholders or through their service as directors.

Item 14. Principal Accounting Fees and Services

Pursuant to the Audit Committee’s charter, to help ensure the independence of our independent registered public accounting firm, all auditing services, internal control-related services and permitted non-audit services (including the terms thereof) to be performed for Metals USA Holdings by its independent registered public accounting firm must be pre-approved by the Audit Committee, subject to the de minimis exceptions for non-audit services described in Section 10A(i)(1)(B) of the Securities Exchange Act which are approved by the Audit Committee prior to the completion of the audit. The Audit Committee may delegate to a subcommittee of its members the authority to grant the required approvals, provided that any exercise of such authority by the subcommittee is presented to the full Audit Committee at its next scheduled meeting.

The Audit Committee approved and retained Deloitte & Touche LLP to audit our consolidated financial statements for 2012 and provide other auditing and advisory services in 2012. The Audit Committee reviewed all non-audit services provided by Deloitte & Touche LLP in 2012 and concluded that the provision of such services was compatible with maintaining Deloitte & Touche LLP’s independence in the conduct of its auditing functions.

The table below sets forth the aggregate fees billed by Deloitte & Touche LLP, the member firms of Deloitte Touche Tohmatsu Limited, and their respective affiliates for audit and non-audit services provided to us and our subsidiaries in 2012 and 2011.


	For the Fiscal Years Ended December 31,
	2012		2011
Audit Fees	$	4,235,250	$	2,296,500
Audit Related Fees		—		—
Tax Fees		207,210		18,290
All Other Fees		—		—

Total	$	4,442,460	$	2,314,790

Audit Fees. In the above table, in accordance with the SEC’s definitions and rules, “audit fees” are fees for professional services for the audit of our consolidated financial statements, for the review of documents filed with the SEC, and for services that are normally provided by the accountant in connection with statutory and regulatory filings or engagements. For 2012 and 2011, the audit fees in the above table are the aggregate fees billed to us and our subsidiaries by Deloitte & Touche LLP for auditing financial statements and reviewing interim financial statements included in our and our subsidiaries’ annual and quarterly reports.

Audit-Related Fees. This category of the table above includes the fees billed for assurance and related services that are reasonably related to the performance of the audit or review of our financial statements and are not reported under “Audit Fees.”

Tax Fees. “Tax fees” are fees for tax compliance, tax advice and tax planning.

All Other Fees. “All other fees” are all fees not included in the above three categories.

The Audit Committee has considered whether the services rendered by the independent registered public accounting firm with respect to the fees described above are compatible with maintaining their independence and has concluded that such services do not impair their independence.

PART IV

Item 15. Exhibits, Financial Statement Schedules

(a)

(1) Financial Statements:


	Page
Report of Independent Registered Public Accounting Firm		46
Consolidated Balance Sheets		47
Consolidated Statements of Operations and Comprehensive Income		48
Consolidated Statements of Stockholders’ Equity		49
Consolidated Statements of Cash Flows		50
Notes to Consolidated Financial Statements		51

(2) Financial Statement Schedules:

Schedule I—Condensed Financial Information of Registrant at December 31, 2012 and 2011 and for the years ended December 31, 2012, 2011 and 2010		100

All other schedules have been omitted since the required information is not significant or is included in the Consolidated Financial Statements or Notes thereto or is not applicable.

(b) Exhibits

Reference is made to the Index of Exhibits immediately preceding the exhibits hereto (beginning on page 96), which index is incorporated herein by reference.

SCHEDULE I—CONDENSED FINANCIAL INFORMATION OF REGISTRANT

METALS USA HOLDINGS CORP.

BALANCE SHEETS (Unconsolidated)

(in millions, except share amounts)


	December 31,
	2012			2011

Assets
Current Assets:
Cash	$	8.4		$	6.2
Receivable from subsidiaries		9.3			10.2

Total current assets		17.7			16.4
Note receivable from Flag Intermediate Holdings Corporation		47.0			47.0
Investment in Flag Intermediate Holdings Corporation		273.9			220.7

Total assets	$	338.6		$	284.1


Liabilities and Stockholders’ Equity
Current liabilities:
Accrued liabilities	$	2.4		$	1.0

Total current liabilities		2.4			1.0
Deferred income tax liability		26.0			26.0

Total liabilities		28.4			27.0

Stockholders’ Equity:
Preferred stock, $0.01 par value, 10,000,000 shares authorized, none issued or outstanding at December 31, 2012 and 2011		—			—
Common stock, $0.01 par value, 140,000,000 shares authorized, 37,140,245 issued and 37,132,394 outstanding at December 31, 2012, and 37,059,236 issued and 37,058,507 outstanding at December 31, 2011		0.4			0.4
Additional paid-in capital		233.9			231.3
Retained earnings		75.6			25.1
Accumulated other comprehensive income		0.4			0.3
Treasury stock, at cost—7,851 shares at December 31, 2012 and 729 shares at December 31, 2011		(0.1	)		—

		310.2			257.1

Total liabilities and stockholders’ equity	$	338.6		$	284.1

The accompanying notes are an integral part of this financial information

100

SCHEDULE I—CONDENSED FINANCIAL INFORMATION OF REGISTRANT

METALS USA HOLDINGS CORP.

STATEMENTS OF OPERATIONS (Unconsolidated)

(in millions)


	Years Ended
	2012		2011		2010
Interest and other income, net	$	3.5	$	5.6	$	1.7
Interest expense		—		—		3.5
Loss on extinguishment of debt		—		—		3.5
Equity of earnings of subsidiaries		50.6		61.2		14.9

Income before income taxes		54.1		66.8		9.6
Provision (benefit) for income taxes		1.4		2.2		(1.9	)

Net income	$	52.7	$	64.6	$	11.5

The accompanying notes are an integral part of this financial information

101

SCHEDULE I—CONDENSED FINANCIAL INFORMATION OF REGISTRANT

METALS USA HOLDINGS CORP.

STATEMENTS OF CASH FLOWS (Unconsolidated)

(in millions)


	Years Ended December 31,
	2012			2011			2010
Cash flows from operating activities:
Net income	$	52.7		$	64.6		$	11.5
Adjustments to reconcile net income to net cash provided by (used in) operating activities:
Equity in earnings of subsidiaries		(50.6	)		(61.2	)		(14.9	)
Loss on extinguishment of debt		—			—			3.5
Amortization of bond discounts and debt issuance costs		—			—			0.1
Deferred income taxes		—			—			(1.9	)
Non-cash interest on PIK option		—			—			6.2
Cash payment of interest on PIK option		—			—			(23.2	)
Decrease in income taxes receivable and other assets		—			1.1			2.7
Decrease (increase) in receivable from subsidiaries		0.9			(0.6	)		(9.6	)
Increase (decrease) in accrued liabilities		1.4			1.0			(4.5	)
Other operating		—			—			3.4

Net cash provided by (used in) operating activities		4.4			4.9			(26.7	)


Cash flows from financing activities:
Repayments of Senior Unsecured Notes		—			—			(146.7	)
Exercise of stock options		0.1			—			—
Purchase of treasury stock		(0.1	)		—			—
Net proceeds from initial public stock offering		—			—			221.2
Advances to subsidiary		—			—			(47.0	)
Dividends paid		(2.2	)		—			—

Net cash (used in) provided by financing activities		(2.2	)		—			27.5

Net increase in cash		2.2			4.9			0.8
Cash, beginning of period		6.2			1.3			0.5

Cash, end of period	$	8.4		$	6.2		$	1.3

The accompanying notes are an integral part of this financial information

102

SCHEDULE I—CONDENSED FINANCIAL INFORMATION OF REGISTRANT

METALS USA HOLDINGS CORP.

NOTES TO FINANCIAL STATEMENTS

(dollars in millions, except per share amounts)

1. Investment in Flag Intermediate Holdings Corporation

Metals USA Holdings Corp. (“Metals USA Holdings”) and its wholly owned subsidiaries, Flag Intermediate Holdings Corporation (“Flag Intermediate”) and Metals USA, Inc. (“Metals USA”) and Metals USA’s wholly owned subsidiaries, are referred to collectively herein as the “Company,” “we” or “our.” Metals USA was acquired on November 30, 2005 by Apollo Management V L.P. (“Apollo Management” and together with its affiliated investment entities “Apollo”).

2. Debt

Senior Floating Rate Toggle Notes due 2012

On July 10, 2007, Metals USA Holdings issued $300.0 initial aggregate principal amount of Senior Floating Rate Toggle Notes due 2012 (the “2007 Notes”).

On April 14, 2010, Metals USA Holdings called for redemption of all of its remaining outstanding 2007 Notes, representing an aggregate principal amount of approximately $169.6 as of the date thereof. The redemption price of the 2007 Notes was 100% of the outstanding aggregate principal amount, plus accrued and unpaid interest thereon to but not including May 14, 2010 (the “Redemption Date”). All of the 2007 Notes were redeemed on the Redemption Date. The Company did not incur any early termination penalties in connection with the redemption of the 2007 Notes. The Company used a portion of the net proceeds from its initial public offering of common stock (the “IPO”), as described more fully in Note 3 below, to finance the redemption. The aggregate cash payment for the redemption, including accrued and unpaid interest, was approximately $170.9. During the second quarter of 2010, $1.1 and $2.4 of unamortized deferred financing costs and original issue discount, respectively, were written off and charged to expense in connection with the redemption of the 2007 Notes.

3. Stockholders’ Equity

Common Stock

Preferred Stock

Treasury Stock

Stock Split and Amended and Restated Certificate of Incorporation

103

Initial Public Offering of Common Stock

4. Commitments and Contingencies

Dividends on Common Stock

On February 5, 2013, our Board of Directors declared a regular quarterly cash dividend of $0.06 per share which was paid on March 12, 2013 to stockholders of record as of the close of business on February 26, 2013.

Contingencies

Litigation Relating to the Merger

Other Litigation

5. Subsequent Event

104

excess, if any, of $20.65 over the per share exercise price of the option multiplied by (ii) the total number of shares of common stock subject to the option. Each share of restricted stock granted under any Metals USA Holdings equity incentive plan, whether vested or unvested, will be cancelled and converted into the right to receive $20.65 per share in cash.

•

a lump sum payment of $750,000 representing one year of his annual base salary;

•

105

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized on March 15, 2013.


METALS USA HOLDINGS CORP.

By:		/S/ C. LOURENCO GONCALVES
		C. Lourenco Goncalves,
		Chairman of the Board,
		Chief Executive Officer and President

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities indicated on March 15, 2013.


Signature				Title

/S/ C. LOURENCO GONCALVES				Chairman of the Board, Chief Executive Officer and President (Principal Executive Officer)
C. Lourenco Goncalves

/S/ M. ALI RASHID				Director
M. Ali Rashid

/S/ ERIC L. PRESS				Director
Eric L. Press

/S/ MATTHEW R. MICHELINI				Director
Matthew R. Michelini

/S/ JOHN T. BALDWIN				Director
John T. Baldwin

/S/ MARK A. SLAVEN				Director
Mark A. Slaven

/S/ LARRY K. POWERS				Director
Larry K. Powers

/S/ ROBERT C. MCPHERSON, III				Senior Vice President and Chief Financial Officer (Principal Financial Officer)
Robert C. McPherson, III

/S/ DANIEL L. HENNEKE				Vice President and Controller (Principal Accounting Officer)
Daniel L. Henneke

106

INDEX OF EXHIBITS


Exhibit Number		Description

2.1		Agreement and Plan of Merger dated May 18, 2005 between Metals USA, Inc., Flag Acquisition Corporation and Flag Intermediate Corporation (filed as Exhibit 2.1 to Flag Intermediate Holdings Corporation’s Registration Statement on Form S-4 (File No. 333-132918) filed on March 31, 2006)

2.2		Agreement and Plan of Merger, dated as of February 6, 2013, by and among Reliance Steel & Aluminum Co., RSAC Acquisition Corp. and Metals USA Holdings Corp. (filed as Exhibit 3.1 to Metals USA Holdings Corp.’s Form 8-K filed on February 7, 2013)

3.1		Amended and Restated Certificate of Incorporation of Metals USA Holdings Corp. (filed as Exhibit 3.1 to Metals USA Holdings Corp.’s Form 8-K filed on April 6, 2010)

3.2		Bylaws of Metals USA Holdings Corp. (filed as Exhibit 3.2 to Metals USA Holdings Corp.’s Form S-1/A (File No. 333-150999) filed on March 19, 2010)

4.1		Registration Rights Agreement, dated as of July 10, 2007, by and among Metals USA Holding Corp. and UBS Securities LLC (filed as Exhibit 4.2 to Metals USA Holdings Corp.’s Form S-4 (File No. 333-146181) filed on September 19, 2007)

10.1		Indenture, dated November 30, 2005, by and among Metals USA, Inc. (formerly Flag Acquisition Corporation), Flag Intermediate Holdings Corporation, the Subsidiary Guarantors and Wells Fargo Bank, N.A., as trustee and Notes Collateral Agent (filed as Exhibit 4.6 to Flag Intermediate Holdings Corporation’s Registration Statement on Form S-4 (File No. 333-132918) filed on March 31, 2006)

10.2		Supplemental Indenture dated as of November 30, 2005, among Metals USA, Inc., Flag Intermediate Holdings Corporation, the Subsidiary Guarantors and Wells Fargo Bank, N.A., as Trustee and Notes Collateral Agent (filed as Exhibit 4.9 to Flag Intermediate Holdings Corporation’s Registration Statement on Form S-4 (File No. 333-132918) filed on March 31, 2006)

10.3		Second Supplemental Indenture, dated as of March 30, 2006, among MUSA Newark, LLC, Metals USA, Inc., Flag Intermediate Holdings Corporation and Wells Fargo Bank, N.A., as Trustee and Notes Collateral Agent (filed as Exhibit 4.10 to Flag Intermediate Holdings Corporation’s Registration Statement on Form S-4 (File No. 333-132918) filed on March 31, 2006)

10.4		Third Supplemental Indenture, dated as of June 20, 2006, among Metals USA International Holdings, Inc., Flag Intermediate Holdings Corporation and Wells Fargo Bank, N.A., as Trustee and Notes Collateral Agent (filed as Exhibit 4.11 to Amendment No. 3 to Flag Intermediate Holdings Corporation’s Registration Statement on Form S-4 (File No. 333-132918) filed on August 1, 2006)

10.5		Amended and Restated Loan and Security Agreement, dated as of December 17, 2010, among each of the Lenders party thereto, Bank of America, N.A., as the Administrative Agent and the Collateral Agent, Flag Intermediate Holdings Corporation, Metals USA, Inc. (formerly Flag Acquisition Corporation) and certain Subsidiaries of Metals USA, Inc. party thereto (filed as Exhibit 10.1 to Metals USA Holdings Corp.’s Form 8-K filed on December 23, 2010)

10.6		Employment Agreement, dated September 13, 2010, between Metals USA Holdings Corp. and C. Lourenco Goncalves (filed as Exhibit 10.1 to Metals USA Holdings Corp.’s Form 8-K filed on September 16, 2010)

10.7		Employment Agreement, dated September 29, 2005, between Metals USA, Inc. and Robert C. McPherson, III (filed as Exhibit 10.3 to Flag Intermediate Holdings Corporation’s Registration Statement on Form S-4 (File No. 333-132918) filed on March 31, 2006)

10.8		Severance Agreement, dated September 29, 2005, between Metals USA, Inc. and Roger Krohn (filed as Exhibit 10.4 to Flag Intermediate Holdings Corporation’s Registration Statement on Form S-4 (File No. 333-132918) filed on March 31, 2006)

10.9		Severance Agreement, dated September 29, 2005, between Metals USA, Inc. and David Martens (filed as Exhibit 10.5 to Flag Intermediate Holdings Corporation’s Registration Statement on Form S-4 (File No. 333-132918) filed on March 31, 2006)

107


Exhibit Number		Description

10.10		Management Deferred Compensation Plan (filed as Exhibit 10.11 to Flag Intermediate Holdings Corporation’s Annual Report on Form 10-K for the year ended December 31, 2006 (File No. 333-132918) filed on March 12, 2007)

10.11		2010 Long Term Incentive Plan (filed as Exhibit 10.23 to Metals USA Holdings Corp.’s Form S-1/A filed on March 19, 2010)

10.12		Amended and Restated Investors Rights Agreement, dated as of April 13, 2010, between Metals USA Holdings Corp. and Apollo Management V, L.P. and its Affiliates (filed as Exhibit 10.14 to Metals USA Holdings Corp.’s Annual Report on Form 10-K for the year ended December 31, 2010)

10.13		Credit Agreement, dated as of December 14, 2012, among Flag Intermediate Holdings Corporation, Metals USA, Inc., the lenders from time to time party thereto, and Credit Suisse AG, as administrative agent and collateral agent (filed as Exhibit 3.1 to Metals USA Holdings Corp.’s Form 8-K filed on December 19, 2012)

10.14		Lien Subordination and Intercreditor Agreement, dated as of December 14, 2012, among Bank of America, N.A., as revolving collateral agent, Credit Suisse AG, as term collateral agent, Flag Intermediate Holdings Corporation, Metals USA, Inc., and the subsidiaries of Metals USA, Inc. named therein (filed as Exhibit 3.1 to Metals USA Holdings Corp.’s Form 8-K filed on December 19, 2012)

12.1#		Computation of Ratio of Earnings to Fixed Charges

21.1#		List of Subsidiaries of Metals USA Holdings Corp.

23.1#		Consent of Independent Registered Public Accounting Firm

31.1#		Certification of the Chief Executive Officer of Metals USA Holdings Corp., dated March 15, 2013, pursuant to Rule 13a-14(a) or 15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

31.2#		Certification of the Chief Financial Officer of Metals USA Holdings Corp., dated March 15, 2013, pursuant to Rule 13a-14(a) or 15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

32.1#		Certification of the Chief Executive Officer of Metals USA Holdings Corp., dated March 15, 2013, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

32.2#		Certification of the Chief Financial Officer of Metals USA Holdings Corp., dated March 15, 2013, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

101.INS*		XBRL Instance Document

101.SCH*		XBRL Taxonomy Extension Schema

101.CAL*		XBRL Taxonomy Extension Calculation Linkbase

101.DEF*		XBRL Taxonomy Extension Definition Linkbase

101.LAB*		XBRL Taxonomy Extension Label Linkbase

101.PRE*		XBRL Taxonomy Extension Presentation Linkbase

pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933 or Section 18 of the Securities Exchange Act of 1934 and otherwise are not subject to liability

#	filed herewith

108