e10vk
Table of Contents

 
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form 10-K
 
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the fiscal year ended December 31, 2010
 
Commission file number 0-31285
 
 
 
 
TTM TECHNOLOGIES, INC.
(Exact Name of Registrant as Specified in Its Charter)
 
     
Delaware
(State or Other Jurisdiction of
Incorporation or Organization)
  91-1033443
(I.R.S. Employer
Identification No.)
2630 South Harbor Boulevard,
Santa Ana, California
(Address of Principal Executive Offices)
  92704
(Zip Code)
 
(714) 327-3000
(Registrant’s telephone number, including area code)
 
Securities registered pursuant to Section 12(b) of the Exchange Act:
 
     
Title of Each Class
 
Name of Each Exchange on Which Registered
 
Common Stock, $0.001 par value   Nasdaq Global Select Market
 
 
 
 
Indicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes þ     No o
 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.  Yes o     No þ
 
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes þ     No o
 
Indicate by check mark whether the registrant has submitted electronically and posted on its Corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes þ     No o
 
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  þ
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
 
             
Large accelerated filer o
  Accelerated filer þ   Non-accelerated filer o   Smaller reporting company o
    (Do not check if a smaller reporting company)
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes o     No þ
 
The aggregate market value of Common Stock held by non-affiliates of the registrant (based on the closing price of the registrant’s Common Stock as reported on the Nasdaq Global Select Market on June 28, 2010, the last business day of the most recently completed second fiscal quarter), was $527,590,448. For purposes of this computation, all officers, directors, and 10% beneficial owners of the registrant are deemed to be affiliates of the registrant. Such determination should not be deemed to be an admission that such officers, directors, or 10% beneficial owners are, in fact, affiliates of the registrant.
 
As of March 3, 2011, there were outstanding 80,782,338 shares of the registrant’s Common Stock, $0.001 par value.
 
DOCUMENTS INCORPORATED BY REFERENCE
 
Portions of the registrant’s definitive Proxy Statement for its 2011 Annual Meeting of Stockholders are incorporated by reference into Part III of this report.
 


 

 
TTM TECHNOLOGIES, INC.
 
ANNUAL REPORT ON FORM 10-K
 
TABLE OF CONTENTS
 
                 
PART I
  ITEM 1.     BUSINESS     1  
  ITEM 1A.     RISK FACTORS     14  
  ITEM 1B.     UNRESOLVED STAFF COMMENTS     31  
  ITEM 2.     PROPERTIES     31  
  ITEM 3.     LEGAL PROCEEDINGS     32  
  ITEM 4.     RESERVED     32  
 
PART II
  ITEM 5.     MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES     32  
  ITEM 6.     SELECTED FINANCIAL DATA     34  
  ITEM 7.     MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS     36  
  ITEM 7A.     QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK     49  
  ITEM 8.     FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA     52  
  ITEM 9.     CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE     52  
  ITEM 9A.     CONTROLS AND PROCEDURES     53  
  ITEM 9B.     OTHER INFORMATION     54  
 
PART III
  ITEM 10.     DIRECTORS, EXECUTIVE OFFICERS, AND CORPORATE GOVERNANCE     54  
  ITEM 11.     EXECUTIVE COMPENSATION     54  
  ITEM 12.     SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS     54  
  ITEM 13.     CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE     54  
  ITEM 14.     PRINCIPAL ACCOUNTING FEES AND SERVICES     54  
 
PART IV
  ITEM 15.     EXHIBITS AND FINANCIAL STATEMENT SCHEDULES     55  
SIGNATURES     57  
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS AND SCHEDULE     59  
 EX-21.1
 EX-23.1
 EX-31.1
 EX-31.2
 EX-32.1
 EX-32.2


Table of Contents

 
PART I
 
Statement Regarding Forward-Looking Statements
 
This report on Form 10-K contains forward-looking statements regarding future events or our future financial and operational performance. Forward-looking statements include statements regarding markets for our products; trends in net sales, gross profits and estimated expense levels; liquidity and anticipated cash needs and availability; and any statement that contains the words “anticipate,” “believe,” “plan,” “forecast,” “foresee,” “estimate,” “project,” “expect,” “seek,” “target,” “intend,” “goal” and other similar expressions. The forward-looking statements included in this report reflect our current expectations and beliefs, and we do not undertake publicly to update or revise these statements, even if experience or future changes make it clear that any projected results expressed in this annual report or future quarterly reports to stockholders, press releases or company statements will not be realized. In addition, the inclusion of any statement in this report does not constitute an admission by us that the events or circumstances described in such statement are material. Furthermore, we wish to caution and advise readers that these statements are based on assumptions that may not materialize and may involve risks and uncertainties, many of which are beyond our control, that could cause actual events or performance to differ materially from those contained or implied in these forward-looking statements. These risks and uncertainties include the business and economic risks described in Item 1A, “Risk Factors.”
 
Unless otherwise indicated or unless the context requires otherwise, all references in this document to “TTM,” “our company,” “we,” “us,” “our,” and similar names refer to TTM Technologies, Inc. and its subsidiaries.
 
ITEM 1.   BUSINESS
 
General
 
We are a leading global provider of time-critical and technologically complex printed circuit board (PCB) products and backplane assemblies (PCBs populated with electronic components), which serve as the foundation of sophisticated electronic products. We are the largest PCB manufacturer in North America and one of the top five PCB manufacturers in the world, based on revenues, with approximately $1.2 billion in net sales in 2010. We have over 17,000 employees worldwide and we operate a total of 15 specialized and integrated facilities in the United States and China. We focus on providing time-to-market and advanced technology products and offer a one-stop manufacturing solution to our customers from engineering support to prototype development through final volume production. This one-stop solution allows us to align technology development with the diversified needs of our customers, many of whom are based in high growth markets, and to enable them to reduce the time required to develop new products and bring them to market. We serve a diversified customer base consisting of approximately 1,160 customers in various markets throughout the world, including manufacturers of networking/communications infrastructure products, personal computers, touch screen tablets and mobile media devices (cellular phones and smart phones). We also serve the high-end computing, commercial aerospace/defense, and industrial/medical industries. Our customers include both original equipment manufacturers (OEMs) and electronic manufacturing services (EMS) providers.
 
In April 2010, we acquired from Meadville Holdings Limited (Meadville) all of the issued and outstanding capital stock of four of its subsidiaries. These four companies and their respective subsidiaries, collectively referred to as the PCB Subsidiaries, comprised Meadville’s PCB manufacturing and distributing business. Prior to the acquisition, the PCB Subsidiaries made Meadville one of the leading PCB manufacturers in China by revenue, with a focus on producing high-end PCB products. Our April 2010 acquisition of the PCB Subsidiaries greatly increased our global production capacity, expanded our presence in the touch screen tablet and mobile media device markets, and enhanced our flexible, rigid-flex, high-density interconnect (HDI) and substrate product capabilities.
 
Prior to our acquisition of the PCB Subsidiaries, we had two operating segments, PCB Manufacturing and Backplane Assembly, consistent with the nature of our operations. Due to the acquisition, we reassessed our operating segments and now manage our worldwide operations based on two geographic operating segments: (1) North America, which consists of seven domestic PCB fabrication plants, including a facility that provides follow-on value-added services primarily for one of the PCB fabrication plants, and one backplane assembly plant in Shanghai, China, which is managed in conjunction with our U.S. operations and its related European sales


1


Table of Contents

support infrastructure; and (2) Asia Pacific, which consists of the PCB Subsidiaries and their seven PCB fabrication plants, which include a substrate facility. Each segment operates predominantly in the same industry with production facilities that produce similar customized products for our customers and uses similar means of product distribution in their respective geographic regions.
 
Industry Overview
 
PCBs are manufactured in panels from sheets of laminated material. Each panel is typically subdivided into multiple PCBs, each consisting of a pattern of electrical circuitry etched from copper to provide an electrical connection between the components mounted to it. PCBs serve as the foundation for virtually all electronic products, ranging from consumer electronics products (such as cellular phones, smart phones, touch screen tablets and personal computers) to high-end commercial electronic equipment (such as medical equipment, data communications routers, switches and servers) and aerospace/defense electronic systems.
 
High-end commercial equipment and aerospace/defense products require customized, multilayer PCBs using advanced technologies. Most high-end commercial and aerospace/defense end markets have low volume requirements that demand a highly flexible manufacturing environment. Traditionally, consumer electronics products utilized commodity-type PCBs with lower layer counts, less complexity and larger production runs. However, recent advances in consumer electronics products are driving a transition to higher layer count, more complex PCBs.
 
According to Prismark Partners LLC, a PCB industry research firm, the worldwide market for PCBs was approximately $51.0 billion in 2010, with the Americas producing 8% (approximately $3.9 billion), China producing 36% (approximately $18.5 billion) and the rest of the world producing 56% (approximately $28.6 billion). According to Prismark Partners, worldwide PCB revenue is expected to increase at a rate of 6% to 8% in 2011.
 
Demand for increasing functionality in electronic products has increased the complexity of PCBs, and this trend is expected to continue. Consumers desire more capacity in their devices — in other words, the demand for the same or smaller size devices with more features is on the rise. Products designed to offer faster data transmission, thinner and more lightweight features, and reduced power consumption generally require increasingly complex PCBs to meet these criteria. By using HDI technology, circuit densities can be increased, thereby providing for smaller products with higher packaging densities. According to Gartner, Inc., a technology research firm, 268 million smart phones were produced in 2010, representing year-over-year growth of over 55%. Gartner predicts smart phone volume will reach approximately 710 million units by 2013, with a substantial portion of growth coming from the Chinese market. Recent industry reports indicate that the Chinese smart phone market is predicted to grow at a 29% compound annual growth rate (CAGR) by 2015, with international brands enjoying significant growth. According to a January 2011 Morgan Stanley research report, the proliferation of smart phones and touch screen tablets is expected to drive HDI PCB demand up 42% in 2011 over 2010 levels.
 
Following a similar upward trend, the global substrate market, which represents approximately 14% of the global PCB market, is expected to grow at a CAGR of 12% by 2014 according to BPA Consulting, a PCB industry research firm. This growth is driven by increasing demand for end-products containing highly-advanced semiconductors. The Chinese substrate market alone is expected to grow at a CAGR of 17% due to both China’s increased production of semiconductors and the continuing growth in end-products containing highly advanced semiconductors. Substrate manufacturing requires deployment of large amounts of resources and strong engineering services. For this reason, we believe that the number of competitors is much smaller compared to standard PCB manufacturers.
 
The PCB manufacturing market is highly fragmented with relatively few large scale companies. According to a report by N.T. Information, a PCB industry research firm, dated June 2010, there were approximately 2,800 manufacturers worldwide in 2009, with the top 20 suppliers representing approximately 40% of the global market. As a result of global economic trends, the number of PCB producers operating in China has increased significantly since 2000. This corresponds with a significant decline of North American and European PCB producers during the same time period.


2


Table of Contents

Industry Trends
 
We believe that several trends are impacting the PCB manufacturing industry. These trends include:
 
Shorter electronic product life cycles.  Continual advances in technology have shortened the life cycles of complex commercial electronic products, placing greater pressure on OEMs to quickly bring new products to market. The accelerated time-to-market and ramp-to-volume needs of OEMs for high-end commercial equipment create opportunities for PCB manufacturers that can offer engineering support in the prototype stage and manufacturing scalability throughout the production life cycle.
 
Increasing complexity of electronic products.  OEMs continue to design higher performance electronic products, which in turn require technologically complex PCBs that can accommodate higher speeds and component densities, including HDI PCBs. These complex PCBs can require very high layer counts, advanced manufacturing processes and materials, and high-mix production capabilities, which involve processing small lots in a flexible manufacturing environment. OEMs increasingly rely upon larger PCB manufacturers, which possess the financial resources necessary to invest in advanced manufacturing process technologies and sophisticated engineering staff, often to the exclusion of smaller PCB manufacturers that do not possess such technologies or resources. Even the low end of the PCB market (less than four layers) continues to transition to higher layer counts as consumer products increase in complexity. Advances in chip technology continue to drive market share growth in HDI, substrate and flex PCB categories.
 
Increasing concentration of global PCB production in Asia.  In recent years, many electronics manufacturers have moved their commercial production to Asia to take advantage of its exceptionally large, low-cost labor pool. In particular, the trend has favored China, which had the largest PCB market in terms of both revenue and number of suppliers in 2010 according to Prismark Partners and N. T. Information. The overall technical capability of suppliers in China has improved dramatically in recent years and China has emerged as a global production center for cellular phones, smart phones, touch screen devices, computers and computer peripherals, and high-end consumer electronics. According to BPA Consulting, approximately 53% of the world’s PCB production will be generated from China, Hong Kong and Taiwan by 2013. The continued outsourcing of production to China should result in additional commercial market share potential for PCB manufacturers with a strong presence and reputation in China.
 
Decreased reliance on multiple PCB manufacturers by OEMs.  OEMs traditionally have relied on multiple PCB manufacturers to provide different services as an electronic product moves through its life cycle. The transfer of a product among different PCB manufacturers often results in increased costs and inefficiencies due to incompatible technologies and manufacturing processes and production delays. In addition, OEMs generally find it easier and less costly to manage fewer PCB manufacturers. As a result, OEMs are reducing the number of PCB manufacturers and backplane assembly service providers on which they rely, presenting an opportunity for those that can offer one-stop manufacturing capabilities — from prototype to volume production.
 
Unique capabilities for aerospace/defense products.  The aerospace/defense market is characterized by increasingly time-consuming and complex certification processes, long product life cycles, and a demand for leading-edge technology with extremely high reliability and durability. While the US Department of Defense (DoD) budget faces increasing scrutiny as part of overall US budget deficit reduction efforts, we anticipate that a continued DoD commitment and upgrades, incorporating leading-edge PCB technology in products for reconnaissance and intelligence, communications and weapon systems combined with Foreign Military Sales (FMS) programs and a recovering global commercial aerospace industry, will support a significant long-term market for these products. Success in the aerospace/defense market is generally achieved only after manufacturers demonstrate the long-term ability to pass extensive OEM and government certification processes, numerous product inspections, audits for quality and performance, and extensive administrative requirements associated with participation in government and high reliability commercial aerospace programs. United States export controls represent a barrier to entry for international competition as they restrict the overseas export and/or overseas manufacture of defense-related materials, services, and sensitive technologies that are associated with United States government programs. In addition, the complexity of the end products serves as a barrier to entry to many potential new suppliers. TTM’s global footprint and strong historical relations with leading North American defense and commercial aerospace contractors provides us with a positive position to support the emerging commercial aerospace industry in China.


3


Table of Contents

Our Strategy
 
Our goal is to be the leading global provider of time-critical, one-stop manufacturing services for highly complex PCBs. In our Asia Pacific segment, we intend to primarily target the smart phone, touch screen tablet and networking infrastructure markets; increase our high technology conventional, HDI, flex and rigid-flex capabilities and capacities; and enhance our current niche position in substrates. In our North America segment, we intend to continue to capitalize on our advanced technology, high mix/low volume and quick-turn around (QTA) service capabilities; enhance our commercial PCB capacity; expand our strategic account management model to strengthen our customer relationships; and leverage our market leadership and niche positions. More generally, our strategy includes:
 
Emphasize advanced technological capabilities and manufacturing processes.  As the demand for more high-end PCBs increases across all markets, production of sophisticated PCBs becomes more complex. We address this growing market by delivering time critical and highly complex manufacturing services. We manufacture PCBs with layer counts in excess of 30 layers and believe that our HDI, flex and rigid-flex, substrate and other high technology capabilities provide an attractive market niche for our company. Our Asia Pacific segment has been a leader in HDI PCBs and IC substrate manufacturing and, accordingly, we believe that we have an early-mover advantage over many of our competitors. With rising requirements for faster data transmission, shrinking features (lightweight and thin) and lower power consumption, more PCB designs have migrated to more complex HDI PCBs from conventional multi-layer PCBs. This is especially true of portable devices such as smart phones and tablet PCs. As a leading manufacturer, we continually evaluate and invest in advanced production equipment, new manufacturing processes, engineering and process technology capabilities, in order to further reduce our delivery times, improve quality, increase yields and decrease costs.
 
Focus on early stages of product life cycle.  We work to service our customers’ needs from the earliest stages of product development, including design services, engineering support and prototype development. By building alliances with our customers early in the development process, we are able to gain advantages in our core markets through the sharing and transfer of technologies and know-how. These alliances, often the result of strategic account management efforts, frequently allow us to gain access to new product pipelines and technologies we may not be able to otherwise obtain, or to obtain them more rapidly, thereby enhancing our leadership position in our targeted markets. Our expertise with new product development is enhanced by our ability to deliver highly complex PCBs to customers in significantly compressed lead times. This rapid delivery service enables OEMs to develop sophisticated electronic products more quickly and reduce their time to market. In addition, our QTA services provide us with an opportunity to cross-sell our other services, including high-mix and volume production in our targeted end markets.
 
Pursue new customers in growth end markets.  We continue to pursue new customers with high growth characteristics and target additional high growth end-markets that are characterized by rapid product introduction cycles and demand for time-critical services. In that regard, our 2010 Meadville acquisition provided significant opportunities in high growth end markets such as the networking/communications infrastructure, touch screen tablet, mobile media device (cellular phones and smart phones) and high-end computing markets. Over the last several years, China has emerged as a global production center for these products. This trend has driven the growth of the PCB market, particularly in China. Our strategic focus on these fast-growing markets, together with our reputation and network of China facilities, has enabled us to generate strong sales growth. Our ability to serve these markets is enhanced by our technological capabilities, as these markets require PCB products with higher layer counts, feature miniaturization, and higher circuit density. In addition, we intend to pursue high-end commercial and defense customers that demand flexible and advanced manufacturing processes, expertise with high-performance specialty materials assembly and testing capabilities, and expertise in other high-mix and complex technologies. We regularly evaluate and pursue internal initiatives aimed at adding new customers and better serving existing customers within our markets.
 
Capitalize on our large presence in China.  We believe that our Asia Pacific operating segment provides a key strategic and competitive advantage. Many key suppliers, direct OEM customers, and EMS customers manufacturing on behalf of OEMs are located in China. China’s increasing dominance in electronics supply chain management is particularly evident in desktop computers, notebook computers, servers, cellular phones, smart


4


Table of Contents

phones, touch screen tablets, and communication equipment products. Proximity to these China-based suppliers and customers enables us to react swiftly to customer demand for comprehensive PCB products and services. We are also able to coordinate more effectively with our suppliers, and enjoy a cost advantage in terms of transportation costs over PCB manufacturers located outside of China. Furthermore, due to historically low labor costs in China, we are able to maintain comparatively lower operating costs and increased production process flexibility.
 
Maintain our customer-driven culture.  Our customer-oriented culture emphasizes extraordinary service, competitive differentiation and superior execution. Our customer-oriented strategies include engaging in co-development of new products, capturing new technology products for next generation equipment, and continuing to invest in and enhance our HDI PCB, rigid flex and flex PCB capabilities. Our ability to anticipate and meet customers’ needs is critical to retaining existing customers and attracting leading companies as new customers. Other key elements of our customer focus includes managing customer schedules and vender inventory.
 
Market our facility specialization and one-stop manufacturing solution.  We utilize a facility specialization strategy in which each order is directed to the facility best suited to the customer’s particular delivery time, product complexity and volume needs. Our plants use compatible technologies and manufacturing processes, allowing us generally to move orders between plants to optimize operating efficiency. This strategy provides customers with faster delivery times and enhanced product quality and consistency. In addition, our global one-stop manufacturing solution includes engineering support, prototype, low volume/high-mix products, medium volume/ramp and high-volume production. This one-stop solution allows us to provide a broad array of services and technologies to meet the rapidly evolving needs of our customers. See “Item 2 — Properties” for a further description of our global specialized and integrated production facilities.
 
Products and Services
 
We offer a wide range of PCB products including conventional PCBs, HDI PCBs, flexible PCBs, rigid-flex PCBs, backplane assemblies, and IC substrates. We also offer certain value-added services to support our customers’ needs. These include design for manufacturability (DFM) support during new product introduction stages, PCB layout design, simulation and testing services, QTA production and drilling and routing services. By providing these value-added services to customers, we are able to provide our customers with a “one-stop” manufacturing solution, which enhances our relationships with our customers.
 
Conventional PCBs
 
A PCB is a board containing a pattern of conducting material, such as copper, which becomes an electrical circuit when electrical components are attached to it. It is the basic platform used to interconnect electronic components and can be found in most electronic products, including computers and computer peripherals, communications equipment, cellular phones, high-end consumer electronics, automotive components and medical and industrial equipment. PCBs are more product-specific than other electronic components because generally they are unique for a specific electronic device or appliance. Conventional PCBs can be classified as single-sided, double-sided and multi-layer boards.
 
A multi-layer PCB can accommodate more complex circuitry than a double-sided PCB. It has more than two copper circuit layers with pieces of laminate bonded by resin in between layers. Multi-layer PCBs require more sophisticated production techniques compared to single and double-sided PCBs, as, among other things, they require high precision manufacturing and more stringent product quality. The number of layers comprising a PCB generally increases with complexity of the end product. For example, a simple consumer device such as a garage door controller may use a single sided or double sided PCB, while a high-end network router or computer server may use a PCB with 20 layers or more.


5


Table of Contents

High density interconnect or HDI PCBs
 
Our North America and Asia Pacific segments produce HDI PCBs, which are PCBs with higher wiring density per unit area and require more sophisticated technology and manufacturing processes for their production than conventional PCB products. HDI PCBs are boards with high-density characteristics including micro holes, or vias (diameter typically less than 0.1 mm), fine lines (line width and spaces typically less than 0.075 mm) and can be composed of thin high performance materials, thereby enabling more connectivity functions per unit area. In general, a board’s complexity is a function of density, layer count, laminate material type and surface finishes. Board density represents a key indicator of a PCB’s overall complexity. As electronic devices have become smaller and more portable, with higher functionality, demand for advanced HDI PCB products has increased dramatically.
 
Flexible PCBs
 
Flexible PCBs are printed circuits produced on a flexible laminate, allowing it to be folded or bent to fit the available space or allow relative movement. We manufacture circuits on flexible substrates that can be installed in three-dimensional applications for electronic packaging systems. Use of flexible circuitry can enable improved reliability, improved electrical performance, reduced weight and reduced assembly costs when compared with traditional wire harness or ribbon cable packaging. Flexible PCBs can provide flexible electronic connectivity of an electrical device’s apparatus such as printer heads, cameras, camcorders, TVs, mobile handsets, and touch screen tablets.
 
Rigid-flex PCBs
 
Rigid-flex circuitry provides a simple means to integrate multiple PCB assemblies and other elements such as display, input or storage devices without wires, cables or connectors, replacing them with thin, light composites that integrate wiring in ultra-thin, flexible ribbons between sections. In rigid-flex packaging, a flexible circuit substrate provides a backbone of wiring with rigid multilayer circuit sections built-up as modules where needed.
 
Since the ribbons can be bent or folded, rigid-flex provides a means to compactly package electronics in three dimensions with dynamic or static bending functions as required, enabling miniaturization and thinness of product design. The simplicity of rigid-flex integration also generally reduces the number of parts required, which can improve reliability. The increasing popularity of mobile electronics coupled with the design trend of developing increasingly thinner, lighter and more feature-rich products is expected to further drive growth in the rigid-flex and flex sector, where these PCBs are the backbone of miniaturization.
 
Rigid-flex technology is essential to a broad range of applications including aerospace, industrial and transportation systems requiring high reliability; hand-held and wearable electronics such as mobile phones, video cameras and music players where thinness and mechanical articulation are essential; and ultra-miniaturized products such as headsets, medical implants and semiconductor packaging where size and reliability are paramount.
 
Backplane assemblies
 
A backplane is an interconnecting device that has circuitry and sockets into which PCBs or other additional electronic devices can be plugged. In a computer, these may be referred to as a “motherboard.” The manufacture of backplane assemblies involves mounting various electronic components to large PCBs. Components include, but are not limited to, connectors, capacitors, resistors, diodes, integrated circuits, hardware and a variety of other parts. We can assemble backplanes and sub-systems and provide full system integration of backplane assemblies, cabling, power, thermal, and other complex electromechanical parts into chassis and other enclosures. In addition to assembly services, we provide inspection and testing services such as automated optical inspection (AOI) and X-ray inspection to ensure that all components have been properly placed and electrical circuits are complete. Our focus is to provide backplane and sub-system assembly products primarily as an extension of our commercial and aerospace/defense PCB offerings.


6


Table of Contents

IC substrates
 
IC substrates are mounts that are used to connect very small ICs (integrated circuits or semiconductors) to comparatively larger PCBs for assembly into electronic end-products such as memory modules, cellular phones, digital cameras, automotive GPS and engine controls. IC substrates, also known as IC carriers, are highly miniaturized circuits manufactured by a process largely similar to that for PCBs, but requiring the use of ultra-thin materials and including micron-scale features, as they must bridge the gap between sub-micron IC features and millimeter scale PCBs. Consequently, IC substrates are generally manufactured in a semiconductor-grade clean room environment to ensure products are free of defects and contamination.
 
IC substrates are a basic component of IC packages which, combined with other electronic components in an assembly, control functions of an electronic appliance. IC packages can be broadly divided into single chip modules (or SCMs) and multi-chip modules (or MCMs), with the former containing one IC chip, and the latter containing multiple chips and other electronic components.
 
Design and Engineering Services
 
We are actively involved in the early stages of many of our customers’ product development cycles. This involvement positions us at the leading-edge of technical innovation in the engineering of complex PCBs. Our engineering and sales teams collaborate to identify the specific needs of our customers and work with them to develop innovative, high performance solutions. We have the ability to offer both mechanical and electrical computer aided design (CAD) services, which allows us to offer our customers complete design through production services for PCB, assembly and system level products. We also offer signal integrity, thermal, and structural analysis services. This method of product development provides us with an in-depth understanding of our customers’ businesses and enables us to better anticipate and serve their needs. Establishing customer relationships early in a product’s life cycle, often as a result of our strategic account management efforts, also provides an advantage in securing preferred vendor status for subsequent ramp to volume and volume production opportunities.
 
Process and product development
 
Process and product development plays a vital role in our business. As electronic products become smaller, demands are also increasing for higher speed and functionality of such products. Accordingly, continued advancement in processing technology is required to develop increasingly smaller sized PCB products with increased functionality by accommodating even more powerful and complicated chipsets. As product responsiveness and speed increases, special electrical properties become factors affecting signal integrity and the transmission speed between PCBs and the electrical components to which they are connected. Special materials, equipment, chemicals and manufacturing processes are therefore required to ensure the proper functioning of the final electronic end-product.
 
Quick-turn around services
 
We refer to our rapid turnaround services as “quick-turn around” because we provide custom-fabricated PCBs to our customers within as little as 24 hours to 10 days. As a result of our ability to rapidly and reliably respond to the critical time requirements of our customers, we generally receive premium pricing for our QTA services as compared to standard lead time prices.
 
  •  Prototype production.  In the design, testing, and launch phase of a new electronic product’s life cycle, our customers typically require limited quantities of PCBs in a very short period of time. We satisfy this need by manufacturing prototype PCBs in small quantities, with delivery times ranging from as little as 24 hours to 10 days.
 
  •  Ramp-to-volume production.  After a product has successfully completed the prototype phase, our customers introduce the product to the market and require larger quantities of PCBs in a short period of time. This transition stage between low-volume prototype production and volume production is known as ramp-to-volume. Our ramp-to-volume services typically include manufacturing up to a few hundred PCBs per order with delivery times ranging from five to 15 days.


7


Table of Contents

 
Manufacturing Technologies
 
The market for our products is characterized by rapidly evolving technology. In recent years, the trend in the electronic products industry has been to increase the speed, complexity, and performance of components while reducing their size. We believe our technological capabilities allow us to address the needs of manufacturers who must bring complicated electronic products to market faster.
 
To manufacture PCBs, we generally receive circuit designs directly from our customers in the form of computer data files, which we review to ensure data accuracy and product manufacturability. Processing these computer files with computer aided manufacturing (CAM) technology, we generate images of the circuit patterns that we then physically develop on individual layers, using advanced photographic processes. Through a variety of plating and etching processes, we selectively add and remove conductive materials to form horizontal layers of thin circuitry, which are separated by electrical insulating material. A multilayer circuit board is produced by laminating together multiple layers of circuitry, using intense heat and pressure under vacuum. Vertical connections between layers are achieved by drilling and plating through small holes, called vias. Vias are made by highly specialized drilling equipment capable of achieving extremely fine tolerances with high accuracy. We specialize in high layer count PCBs with extremely fine geometries and tolerances. Because of the tolerances involved, we employ clean rooms in certain manufacturing processes where tiny particles might otherwise create defects on the circuit patterns. We also use automated optical inspection systems and electrical testing systems to ensure consistent quality of the circuits we produce.
 
We believe that our highly specialized equipment and advanced manufacturing processes enable us to reliably produce PCBs with the following characteristics:
 
  •  High layer count.  Manufacturing PCBs with a large number of layers is difficult to accomplish due to the accumulation of manufacturing tolerances and registration systems required. In our North America segment, we regularly manufacture PCBs with more than 30 layers on a quick-turn and volume basis. Approximately 62% of our 2010 North America PCB revenue involved the manufacture of PCBs with at least 12 layers or more, compared with 60% in 2009. Printed circuit boards with at least 20 layers or more represented 31% of North America PCB revenue in 2010, up from 26% in 2009. Approximately 24% of our 2010 Asia Pacific net sales involved the manufacture of PCBs with at least 12 layers or more.
 
  •  High Density Interconnect (HDI).  HDI technology utilizes microvias, which are small vias with diameters generally between 0.001 inches and 0.005 inches after plating. These microvias consume much less space on the layers they interconnect, thereby providing for greater wiring densities and closer spacing of components and their attachment pads. The fabrication of PCBs with microvias requires specialized equipment, such as laser drills, and highly developed process knowledge. Applications such as handheld wireless devices employ microvias to obtain a higher degree of functionality from a given surface area. HDI PCBs represented approximately 34% of our Asia Pacific net sales in 2010.
 
  •  Blind and buried vias.  Vias are drilled holes that provide electrical connectivity between layers of circuitry in a PCB. Blind vias connect the surface layer of the PCB to an internal layer and terminate at the internal layer. Buried vias are holes that do not reach either surface of the PCB but allow inner layers to be interconnected. Products with blind and buried vias can be made thinner, smaller, lighter and with higher component density and more functionality than products with traditional vias.
 
  •  Embedded passives.  Embedded passive technology involves embedding either the capacitive or resistive elements inside the PCB, which allows for removal of passive components from the surface of the PCB and thereby leaves more surface area for active components. Use of this technology results in greater design flexibility and products with higher component density and increased functionality.
 
  •  Fine line traces and spaces.  Traces are the connecting copper lines between the different components of the PCB, and spaces are the distances between traces. The smaller the traces and the tighter the spaces, the higher the density on the PCB and the greater the expertise required to achieve a desired final yield on an order. We are able to provide 0.002 inch traces and spaces.


8


Table of Contents

 
  •  High aspect ratios.  The aspect ratio is the ratio between the thickness of the PCB and the diameter of a drilled hole. The higher the ratio, the greater the difficulty to reliably form, electroplate and finish all the holes on a PCB. In production, we are able to provide aspect ratios of up to 15:1.
 
  •  Thin core processing.  A core is the basic inner-layer building block material from which PCBs are constructed. A core consists of a flat sheet of material comprised of glass-reinforced resin with copper foil laminated on either side. The thickness of inner-layer cores is typically determined by the overall thickness of the PCB and the number of layers required. The demand for thinner cores derives from the requirements for thinner PCBs, higher layer counts and various electrical parameters. Core thickness in our PCBs ranges from as little as 0.002 inches up to 0.062 inches.
 
  •  Advanced hole fill process.  Our advanced hole fill processes provide designers the opportunity to increase the density of component placements by reducing the surface area required to place many types of components. In traditional design, components are routed from their surface interfaces through via connections in order to access power and ground connections and the internal circuitry used to connect to other discrete components. Our advanced hole fill processes provide methods to allow for vias to be placed inside their respective surface mount pads by filling the vias with a thermoset epoxy and plating flat copper surface mount pads directly over the filled hole.
 
  •  Advanced materials.  We manufacture circuit boards using a wide variety of advanced insulating materials. These high-performance materials offer electrical, thermal, and long-term reliability advantages over conventional materials but are more difficult to manufacture. We are certified by Underwriters Laboratories to manufacture PCBs using many types and combinations of these specialty materials. This wide offering allows us to manufacture complex boards for niche and high-end commercial and aerospace/defense markets.
 
  •  High frequency circuits.  We have the ability to produce and test specialized circuits used in radio-frequency or microwave emission and collection applications. These products are typically used for radar, transmit/receive antennas and similar wireless applications. Markets for these products include defense, avionics, satellite, and commercial. The manufacture of these products requires advanced materials, equipment, and methods that are highly specialized and distinct from conventional printed circuit manufacturing techniques. We also offer specialized radio-frequency assembly and test services.
 
  •  Thermal management.  Increased component density on circuit boards often requires improved thermal dissipation to reduce operating temperatures. We have the ability to produce printed circuits with electrically passive heat sinks laminated externally on a circuit board or between two circuit boards and/or electrically active thermal cores.
 
Customers and Markets
 
Our customers include both OEMs and EMS companies that primarily serve the networking/communications, aerospace/defense, high-end computing and medical/industrial/instrumentation end markets of the electronics industry. Included in the end markets that our OEM and EMS customers serve is the U.S. government. As a result, we are a supplier, primarily as a subcontractor, to the U.S. government. We measure customers as those companies that have placed orders of $2,000 or more in the preceding 12-month period. As of December 31, 2010 and 2009, we had approximately 1,160 and 850 customers, respectively. The increase in customers is due primarily to our acquisition of the PCB Subsidiaries in April 2010.


9


Table of Contents

The following table shows the percentage of our net sales in each of the principal end markets we served for the periods indicated:
 
                         
End Markets(1)
  2010     2009     2008  
 
Aerospace/Defense
    20 %     44 %     37 %
Cellular Phone
    10              
Computing/Storage/Peripherals
    21       11       12  
Medical/Industrial/Instrumentation/Other
    9       8       10  
Networking/Communications
    35       36       40  
Other
    5       1       1  
                         
Total
    100 %     100 %     100 %
                         
 
 
(1) Sales to EMS companies are classified by the end markets of their OEM customers.
 
Sales attributable to our five largest OEM customers, which can vary from year to year, accounted for 28%, 34% and 29% of our net sales in 2010, 2009 and 2008, respectively. Our five largest OEM customers in 2010 were, in alphabetical order, Apple, Cisco Systems, Ericsson, Huawei, and IBM. Sales attributed to OEMs include sales made through EMS providers. Sales to EMS providers comprised approximately 45%, 47% and 52% of our net sales in 2010, 2009 and 2008, respectively. Although our contractual relationships are with the EMS companies, we typically negotiate price and volume requirements directly with the OEMs. In addition, we are on the approved vendor lists of several of our EMS providers. This positions us to participate in business that is awarded at the discretion of the EMS provider. Our five largest EMS customers in 2010 were, in alphabetical order, Celestica, Flextronics, Hon Hai, Jabil and Plexus.
 
During 2010, 2009 and 2008 our net sales by country were as follows:
 
                         
Country
  2010     2009     2008  
 
United States
    35 %     74 %     74 %
China
    42       16       12  
Malaysia
    5       5       5  
Other
    18       5       9  
                         
Total
    100 %     100 %     100 %
                         
 
Net sales to other countries, individually, for the years ended December 31, 2010, 2009 and 2008 did not exceed 10% of total net sales.
 
Our marketing strategy focuses on building long-term relationships with our customers’ engineering and new product introduction personnel early in the product development phase, frequently through strategic account management teams. As the product moves from the prototype stage through ramp-to-volume and volume production, we shift our focus to the customers’ procurement departments in order to capture sales at each point in the product’s life cycle.
 
Our staff of engineers, sales support personnel, and managers assist our sales representatives in advising customers with respect to manufacturing feasibility, design review, and technological capabilities through direct communication and visits. We combine our sales efforts with customer service at each facility to better serve our customers. Each large customer is typically assigned an account manager to coordinate all of the company’s services across all of our facilities. Additionally, the largest and most strategic customers are also supported by selected program management and engineering resources. Our sales force is comprised of direct sales personnel, complemented by a large force of commission-based, independent representatives.
 
Our international footprint includes the PCB Subsidiaries and their seven PCB fabrication plants, a backplane and sub-system assembly operation in Shanghai, China, and customer inventory hubs in France, Poland, Hong Kong, China, Mexico, and Southeast Asia. Our international sales force services customers throughout North America, Europe, Asia, and the Middle East. We believe our international reach enables us to access new customers and allows us to better serve existing customers.


10


Table of Contents

Suppliers
 
The primary raw materials we use in PCB manufacturing include copper-clad laminate; chemical solutions such as copper and gold for plating operations; photographic film; carbide drill bits; and plastic for testing fixtures. Although we have preferred suppliers for some raw materials used in the manufacture of PCBs, most of our raw materials are generally readily available in the open market from numerous other potential suppliers.
 
The primary raw materials we use in backplane assembly are manufactured components such as PCBs, connectors, capacitors, resistors, diodes, integrated circuits and formed sheet metal, many of which are custom made and controlled by our customers’ approved vendors. These components for backplane assemblies in some cases have limited or sole sources of supply. For example, in some instances our customers will require us to use a specific component from a particular supplier or require us to use a component provided by the customer itself, in which case we may have a single or limited number of suppliers for these specific components.
 
We typically use just-in-time procurement practices to maintain our raw materials inventory at low levels and work closely with our suppliers to obtain technologically advanced raw materials. In addition, we periodically seek alternative supply sources to ensure that we are receiving competitive pricing and service. Adequate amounts of all raw materials have been available in the past, and we believe this availability will continue into the foreseeable future.
 
Both PCB and IC substrates are heavy consumers of gold and copper, which represented a significant amount of our cost of goods sold in 2010, and are thus vulnerable to cost increases if raw material prices rise. See “Item 1A — Risk Factors.”
 
Competition
 
Despite industry consolidation, the PCB industry is fragmented and characterized by intense competition. Our principal PCB and substrate competitors include Unimicron, Ibiden, Tripod, Foxconn, DDi, Sanmina-SCI, Multek and Wus. Our principal backplane assembly competitors include Amphenol, Sanmina-SCI, Simclar, TT Electronics, and Viasystems.
 
We believe we compete favorably based on the following competitive factors:
 
  •  status as a top five global PCB manufacturer;
 
  •  capability and flexibility to produce technologically complex products;
 
  •  ability to offer one-stop manufacturing solution;
 
  •  specialized and integrated manufacturing facilities;
 
  •  ability to offer time-to-market capabilities;
 
  •  leading edge aerospace/defense capabilities;
 
  •  flexibility to manufacture low volume, high-mix products;
 
  •  consistent high-quality product; and
 
  •  outstanding customer service.
 
In addition, we believe our continuous evaluation and early adoption of new manufacturing and production technologies give us a competitive advantage. We believe that our ability to manufacture PCBs using advanced technologies, including our HDI and substrate capabilities, provides us with a competitive advantage over manufacturers that do not possess this advanced technological expertise. Our future success will depend in large part on our ability to maintain and enhance our manufacturing capabilities and production technologies.


11


Table of Contents

Seasonality
 
As a result of the product and customer mix of our Asia Pacific operating segment, a portion of our revenue is subject to seasonal fluctuations. These fluctuations include seasonal patterns in the computer and cellular phone industry, which together have become a significant portion of the end markets that we serve. This seasonality typically results in higher net sales in the third quarter due to end customer demand for fourth quarter sales of consumer electronics products. Seasonal fluctuations also include the Chinese New Year holiday in the first quarter, which typically results in lower net sales.
 
Backlog
 
Backlog consists of purchase orders received, including, in some instances, forecast requirements released for production under customer contracts. We obtain firm purchase orders from our customers for all products. However, for many of these purchase orders, customers do not make firm orders for delivery of products more than 30 to 60 days in advance. Some of the markets which we serve are characterized by increasingly short product life cycles. For other markets, longer product life cycles are more common as are orders for deliveries greater than 60 days in advance. At December 31, 2010, total backlog was $207.8 million compared with $93.6 million at the end of 2009. The increase in the backlog is due primarily to our acquisition of the PCB Subsidiaries in April 2010 as well as stronger business conditions in 2010 compared to 2009. Substantially all backlog at December 31, 2010 is expected to be converted to sales in 2011.
 
Intellectual Property
 
We believe our business depends on the effectiveness of our fabrication techniques and our ability to continue to improve our manufacturing processes. We have limited patent or trade secret protection for our manufacturing processes. We rely on the collective experience of our employees in the manufacturing process to ensure that we continuously evaluate and adopt the new technologies available in our industry. In addition, we depend on training, recruiting, and retaining our employees, who are required to have sufficient know-how to operate advanced equipment and to conduct complicated manufacturing processes.
 
National Security Matters
 
A portion of our business consists of manufacturing defense and defense-related items for various departments and agencies of the U.S. government, including the U.S. Department of Defense, or the DoD, which requires that we maintain facility security clearances under the National Industrial Security Program, or NISP. The NISP requires that a corporation maintaining a facility security clearance take steps to mitigate foreign ownership, control or influence, referred to as “FOCI.” Pursuant to these laws and regulations, effective October 2010 we entered into a Special Security Agreement with the DoD; Su Sih (BVI) Limited, or Su Sih (a significant foreign minority owner of our capital stock); and Mr. Tang Hsiang Chien (as the beneficial owner of Su Sih). The purpose of the Special Security Agreement is to deny Mr. Tang, Su Sih, and other persons affiliated with our PCB Subsidiaries from unauthorized access to classified and controlled unclassified information and influence over our business or management in a manner that could result in the compromise of classified information or could adversely affect the performance of classified contracts.
 
Other Governmental Regulations
 
Our operations, particularly those in North America, are subject to a broad range of regulatory requirements relating to export control, environmental compliance, waste management, and health and safety matters. In particular, we are subject to the following:
 
  •  U.S. Department of State regulations, including the Arms Export Control Act (AECA) and International Traffic In Arms Regulations (ITAR) located at 22 CFR Parts 120-130;
 
  •  U.S. Department of Commerce regulations, including the Export Administration Regulations (EAR) located at 15 CFR Parts 730-744;
 
  •  Office of Foreign Asset Control (OFAC) regulations located at 31 CFR Parts 500-599;


12


Table of Contents

 
  •  U.S. Occupational Safety and Health Administration (OSHA), and state OSHA and Department of Labor laws pertaining to health and safety in the workplace;
 
  •  U.S. Environmental Protection Agency (U.S. EPA) regulations pertaining to air emissions; wastewater discharges; and the use, storage, discharge, and disposal of hazardous chemicals used in the manufacturing processes;
 
  •  Department of Homeland Security (DHS) regulations regarding the storage of certain chemicals of interest;
 
  •  corresponding state laws and regulations, including site investigation and remediation;
 
  •  corresponding U.S. county and city agencies;
 
  •  corresponding regulations and agencies in China for our Chinese facilities;
 
  •  material content directives and laws that ban or restrict certain hazardous substances in products sold in member states of the European Union, China, other countries, and New York City; and
 
  •  directives that disallow the use of certain minerals (“conflict minerals”) originating in the Democratic Republic of the Congo.
 
To date, the costs of compliance and environmental remediation have not been material to us. Nevertheless, additional or modified requirements may be imposed in the future. If such additional or modified requirements are imposed on us, or if conditions requiring remediation at other sites are found to exist, we may be required to incur substantial additional expenditures.
 
Employees
 
As of December 31, 2010, we had 17,448 employees. Of our employees, 15,691 were involved in manufacturing and engineering, 271 worked in sales and marketing, and 1,486 worked in accounting, systems and other support capacities. None of our U.S. employees are represented by unions. In China, approximately 8,251 employees are represented by a labor union. We have not experienced any labor problems resulting in a work stoppage and believe that we have good relations with our employees.
 
Management
 
The following table, together with the accompanying text, presents certain information as of December 31, 2010, with respect to each of our executive officers.
 
             
Name
 
Age
 
Position(s) Held With the Company
 
Kenton K. Alder
    61     Chief Executive Officer, President and Director
Chung Tai Keung, Canice
    55     Chief Executive Officer - Asia Pacific Region
Steven W. Richards
    46     Executive Vice President, Chief Financial Officer and Secretary
Douglas L. Soder
    50     Executive Vice President
Shane S. Whiteside
    45     Executive Vice President and Chief Operating Officer
 
Kenton K. Alder has served as our Chief Executive Officer, President and Director since March 1999. From January 1997 to July 1998, Mr. Alder served as Vice President of Tyco Printed Circuit Group Inc., a PCB manufacturer. Prior to that time, Mr. Alder served as President and Chief Executive Officer of ElectroStar, Inc., previously a publicly held PCB manufacturing company, from December 1994 to December 1996. From January 1987 to November 1994, Mr. Alder served as President of Lundahl Astro Circuits Inc., a predecessor company to ElectroStar. Mr. Alder holds a Bachelor of Science degree in Finance and a Bachelor of Science degree in Accounting from Utah State University.
 
Mr. Chung Tai Keung, Canice has served as Chief Executive Officer of our Asia Pacific operating segment since April 8, 2010. Prior to joining our company, Mr. Chung served as Deputy Managing Director of Meadville Group since 2005. Prior to joining the Meadville Group, Mr. Chung was an executive director of Elec & Eltek International Holdings Limited (formerly listed on The Stock Exchange of Hong Kong Limited) from August 1993


13


Table of Contents

to March 2005 and Elec & Eltek International Company Limited (a company listed on the Singapore Exchange Securities Trading Limited) from April 1994 to March 2005. Mr. Chung had been Chief Executive Officer of Elec & Eltek Group’s PCB business and held various management positions at Fairchild Semiconductors (HK) Limited, China Cement Company (Hong Kong) Limited, the Astec Group and Chen Hsong Machinery Co, Limited. Mr. Chung graduated from the Hong Kong Polytechnic University in 1979 in Accountancy. Mr. Chung is currently the vice chairman of the Hong Kong Printed Circuit Association Limited.
 
Steven W. Richards has served as our Chief Financial Officer since December 2005 and Executive Vice President since November 2006. Mr. Richards has served as our Secretary since September 2005, a Vice President since October 2003 and our Treasurer from May 2000 to December 2005. From June 1996 to April 2000, Mr. Richards worked in a variety of financial planning and analysis roles at Atlantic Richfield Corporation, a multinational oil and gas company. Mr. Richards holds a Bachelor of Journalism degree from the University of Missouri, Columbia and a Master of Business Administration degree from the University of Southern California. Mr. Richards is a Chartered Financial Analyst charterholder.
 
Douglas L. Soder has served as our Executive Vice President since November 2006. Prior to joining our company, Mr. Soder held the position of Executive Vice President for Tyco Electronics from January 2001 until our acquisition of that company in October 2006. During an almost 24-year career at Tyco Electronics, Mr. Soder served in a variety of sales, sales management, and operations management positions at its AMP Incorporated and PCG subsidiaries. From November 1996 to January 2001, Mr. Soder was Vice President of Sales and Marketing for PCG. Mr. Soder holds a Bachelor of Arts degree in Political Science from Dickinson College.
 
Shane S. Whiteside has served as an Executive Vice President since November 2006 and our Chief Operating Officer since December 2002. From January 2001 to November 2002, Mr. Whiteside was the Vice President of Operations — Santa Ana Division and our Director of Operations — Santa Ana Division from July 1999 to December 2000. From March 1998 to June 1999, Mr. Whiteside was our Director of Operations of Power Circuits. Mr. Whiteside holds a Bachelor of Arts degree in Economics from the University of California at Irvine.
 
Availability of Reports Filed with the Securities and Exchange Commission
 
We are a Delaware corporation, with our principal executive offices located at 2630 South Harbor Blvd., Santa Ana, CA 92704. Our telephone number is (714) 327-3000. Our web site address is www.ttmtech.com. Information included on our website is not incorporated into this report. Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports are available without charge on our website at www.ttmtech.com/investors/investors.jsp, as soon as reasonably practicable after they are filed electronically with the Securities and Exchange Commission (SEC). Copies are also available without charge by (i) telephonic request by calling our Investor Relations Department at (714) 241-0303, (ii) e-mail request to investor@ttmtech.com, or (iii) a written request to TTM Technologies, Inc., Attention: Investor Relations, 2630 South Harbor Blvd., Santa Ana, CA 92704.
 
ITEM 1A.   RISK FACTORS
 
An investment in our common stock involves a high degree of risk. You should carefully consider the factors described below, in addition to those discussed elsewhere in this report, in analyzing an investment in our common stock. If any of the events described below occurs, our business, financial condition, and results of operations would likely suffer, the trading price of our common stock could fall, and you could lose all or part of the money you paid for our common stock.
 
In addition, the following risk factors and uncertainties could cause our actual results to differ materially from those projected in our forward-looking statements, whether made in this annual report or future quarterly reports to stockholders, press releases, or oral statements, whether in presentations, responses to questions, or otherwise.


14


Table of Contents

We are heavily dependent upon the worldwide electronics industry, which is characterized by significant economic cycles and fluctuations in product demand. A significant downturn in the electronics industry could result in decreased demand for our manufacturing services and could lower our sales and gross margins.
 
A majority of our revenue is generated from the electronics industry, which is characterized by intense competition, relatively short product life cycles, and significant fluctuations in product demand. Furthermore, the industry is subject to economic cycles and recessionary periods and has been negatively affected by the current contraction in the U.S. economy. Moreover, due to the uncertainty in the end markets served by most of our customers, we have a low level of visibility with respect to future financial results. The current credit crisis and related turmoil in the financial system have negatively impacted the global economy and the electronics industry. A lasting economic recession, excess manufacturing capacity, or a prolonged decline in the electronics industry could negatively affect our business, results of operations, and financial condition. A decline in our sales could harm our profitability and results of operations and could require us to record an additional valuation allowance against our deferred income tax assets or recognize an impairment of our long-lived assets, including goodwill and other intangible assets.
 
Our development plans involve significant capital expenditures and financing requirements, which are subject to a number of risks and uncertainties.
 
Our business is capital intensive. Our ability to increase revenue, profit, and cash flow depends upon continued capital spending. There can be no assurance as to whether — or at what cost — our anticipated capital projects will be completed, if they will be completed on schedule, or as to the success of these projects if completed. In addition, we may be unable to generate sufficient cash flows from operations or obtain necessary external financing to finance our capital expenditures and investments. Further, our ability to obtain external financing in the future is subject to a variety of uncertainties, including the following:
 
  •  our future results of operations, financial condition, and cash flows;
 
  •  the condition of the global economy generally and the demand for our products, specifically; and
 
  •  the cost of financing and the condition of financial markets.
 
If adequate funds are not available on satisfactory terms, we may be forced to curtail our expansion plans, which could result in a loss of customers, the inability to successfully implement our business strategy, and limitations on the growth of our business.
 
As a result of the acquisition of the PCB Subsidiaries, we are a substantially larger and broader organization, with a greater geographic diversity relative to our operations prior to the acquisition. If management is unable to sufficiently manage the combined company, operating and financial results would suffer.
 
As a result of the acquisition of the PCB Subsidiaries, we have significantly more employees, greater geographic diversity, and customers in multiple distribution channels. We face challenges inherent in efficiently managing an increased number of employees over large geographic distances, including the need to implement appropriate policies, benefits, reporting, management, and compliance programs and systems. The inability to manage successfully the substantially larger and internationally diverse organization, or any significant delay in achieving successful management of the organization, could have a material adverse effect on our company and, as a result, on the market price of our common stock.
 
We may not realize the operating and financial benefits we expect from our Asia Pacific operations.
 
The post-acquisition integration of our company and the PCB Subsidiaries has been progressing well. The integration is, however, complex, time-consuming, and expensive. As a combined company, we need to overcome significant challenges in order to realize anticipated benefits and synergies. These challenges include the timely, efficient, and successful completion of a number events, including the following:
 
  •  continued integration of the operations of the companies;


15


Table of Contents

 
  •  continued implementation of disclosure controls, internal controls, and financial reporting systems to comply with the requirements of accounting principles generally accepted in the United States, or U.S. GAAP; Section 404 of the Sarbanes-Oxley Act of 2002; and U.S. securities laws and regulations required as a result of integration of the PCB Subsidiaries as part of a consolidated reporting company under the Securities Exchange Act of 1934 as amended (“The Exchange Act”);
 
  •  retaining and assimilating the key personnel of each company;
 
  •  resolving possible inconsistencies in operating and product standards, internal controls, procedures and policies, business cultures, corporate governance and reporting practices, and compensation methodologies between the companies;
 
  •  addressing the significant wage increases that have occurred throughout the PRC in recent periods;
 
  •  retaining existing vendors and customers of the companies and attracting additional customers;
 
  •  retaining strategic partners of each company and attracting new strategic partners; and
 
  •  creating uniform business standards, procedures, policies, and information systems.
 
The execution of these post-acquisition integration events involve considerable risks. These risks include the following:
 
  •  potential disruption of ongoing business operations and distraction of the management of the combined company;
 
  •  potential strain on financial and managerial controls and reporting systems and procedures of the combined company;
 
  •  unanticipated expenses and potential delays related to integration of the operations, technology, and other resources of the companies;
 
  •  potential impairment of relationships with employees, suppliers, and customers as a result of the inclusion and integration of management personnel;
 
  •  greater than anticipated costs and expenses related to the integration of the respective businesses of us and the PCB Subsidiaries;
 
  •  the difficulty of complying with government-imposed regulations in both the U.S. and China, which may in many ways be materially different from one another; and
 
  •  potential unknown liabilities associated with the combined operations.
 
The combined company may not succeed in mitigating these risks. The inability to successfully integrate the operations, technology, and personnel of our company and the PCB Subsidiaries, or any significant delay in achieving integration of the companies, could have a material adverse effect on the combined company and, as a result, on the market price of our common stock.
 
Our Asia Pacific operations serve customers and have manufacturing facilities outside the United States and are subject to the risks characteristic of international operations. These risks include significant potential financial damage and potential loss of business and assets.
 
Because we have significant manufacturing operations in Asia and sales offices located in Asia and Europe, we are subject to the risks of changes in economic and political conditions in those countries, including but not limited to:
 
  •  managing international operations;
 
  •  export license requirements;
 
  •  fluctuations in the value of local currencies;
 
  •  labor unrest, rising wages and difficulties in staffing;


16


Table of Contents

 
  •  government or political unrest;
 
  •  longer payment cycles;
 
  •  language and communication barriers as well as time zone differences;
 
  •  cultural differences;
 
  •  increases in duties and taxation levied on our products;
 
  •  imposition of restrictions on currency conversion or the transfer of funds;
 
  •  limitations on imports or exports of our product offering;
 
  •  travel restrictions;
 
  •  expropriation of private enterprises; and
 
  •  the potential reversal of current favorable policies encouraging foreign investment and trade.
 
Our operations in China subject us to risks and uncertainties relating to the laws and regulations of China.
 
Under its current leadership, the government of China has been pursuing economic reform policies, including the encouragement of foreign trade and investment and greater economic decentralization. No assurance can be given, however, that the government of China will continue to pursue such policies, that such policies will be successful if pursued, or that such policies will not be significantly altered from time to time. Despite progress in developing its legal system, China does not have a comprehensive and highly developed system of laws, particularly with respect to foreign investment activities and foreign trade. Enforcement of existing and future laws and contracts is uncertain, and implementation and interpretation thereof may be inconsistent. As the Chinese legal system develops, the promulgation of new laws, changes to existing laws and the preemption of local regulations by national laws may adversely affect foreign investors. Further, any litigation in China may be protracted and may result in substantial costs and diversion of resources and management attention. In addition, some government policies and rules are not timely published or communicated, if they are published at all. As a result, we may operate our business in violation of new rules and policies without having any knowledge of their existence. These uncertainties could limit the legal protections available to us.
 
Our Asia Pacific operations could be adversely affected by a shortage of utilities or a discontinuation of priority supply status offered for such utilities.
 
The manufacturing of PCBs requires significant quantities of electricity and water. The PCB Subsidiaries have historically purchased substantially all of the electrical power for their manufacturing plants in China from local power plants. Because China’s economy has recently been in a state of growth, the strain on the nation’s power plants is increasing, which has led to continuing power outages in various parts of the country. There may be times when our operations in China may be unable to obtain adequate sources of electricity to meet production requirements. Additionally, we would not likely maintain any back-up power generation facilities for our operations, so if we were to lose power at any of our facilities we would be required to cease operations until power was restored. Any stoppage of power could adversely affect our ability to meet our customers’ orders in a timely manner, thus potentially resulting in a loss of business and increased costs of manufacturing. In addition, the sudden cessation of power supply could damage our equipment, resulting in the need for costly repairs or maintenance as well as damage to products in production, resulting in an increase in scrapped products. Similarly, the sudden cessation of the water supply to China facilities could adversely affect our ability to fulfill orders in a timely manner, potentially resulting in a loss of business and under-utilization of capacity. Various regions in China have in the past experienced shortages of both electricity and water and unexpected interruptions of power supply. There can be no assurance that our required utilities would not in the future experience material interruptions, which could have a material adverse effect on our results of operations and financial condition.


17


Table of Contents

As a global organization, we continue to invest in our operations to integrate us and the PCB Subsidiaries and to maintain and grow our combined business, and we may need additional funds to do so.
 
We depend on the availability of adequate capital to maintain and develop our business. We believe that we can meet our capital requirements from internally generated funds, cash in hand, and available borrowings. If we are unable to fund our capital requirements as currently planned, however, it would have a material adverse effect on our business, financial condition, and operating results. If we do not achieve our expected operating results, we would need to reallocate our sources and uses of operating cash flows. This may include borrowing additional funds to service debt payments, which may impair our ability to make investments in our business. There is no assurance that we would be able to borrow any such additional funds when needed on commercially acceptable terms or at all.
 
Should we need to raise funds through incurring additional debt, we may become subject to covenants even more restrictive than those contained in our current debt instruments. Furthermore, if we issue additional equity, our equity holders would suffer dilution. There can be no assurance that additional capital would be available on a timely basis, on favorable terms, or at all.
 
We incur a variety of costs as a result of being a public company, and those costs have increased and may continue to increase as a result of our acquisition of the PCB Subsidiaries.
 
As a U.S. public company registered with the SEC under the Exchange Act, we incur significant legal, accounting, and other expenses. In addition, the Sarbanes-Oxley Act of 2002, as well as rules subsequently implemented by the SEC and the Nasdaq Stock Market, frequently require changes in corporate governance policies and practices of companies registered with the SEC under the Exchange Act. These rules and regulations increase legal and financial compliance costs and make some activities more time-consuming and costly. In addition, we incur additional costs associated with our Exchange Act public company reporting requirements. These rules and regulations also may make it more difficult and more expensive for us to obtain and pay for, at commercially reasonable rates, director and officer liability insurance, and we may be required to accept reduced policy limits and reduced scope of coverage or incur substantially higher costs to obtain the same or similar levels of coverage. As a result, it may be more difficult for us to attract and retain qualified persons to serve on our board of directors or as executive officers. As a result, implementation of disclosure controls, internal controls, and financial reporting systems complying with the requirements of U.S. GAAP and U.S. securities laws and regulations required as a result of our continued status as a reporting company under the Exchange Act may be more difficult and costly than anticipated.
 
The principal owners of Meadville own a substantial percentage of our common stock.
 
Approximately 35% of our common stock was owned by Meadville’s shareholders as of December 31, 2010. These principal shareholders of Meadville are entitled to jointly nominate one individual to our board of directors and a majority of the members of the board of directors of the PCB Subsidiaries.
 
The PCB Subsidiaries do not currently have a certificate of state-owned land use or certificates of real estate ownership for certain of their properties in China and the properties associated with certain facilities are subject to a general city re-zoning plan which, if implemented in the future, may require us to relocate these facilities.
 
The PCB Subsidiaries do not currently have certificates of real estate ownership for certain non-manufacturing buildings in China. The PCB Subsidiaries also have not obtained the relevant certificate of state-owned land use and certificates of real estate ownership for certain facilities in China. Further, there is a legal defect in the leasing of a parcel of land currently used for dormitories and two buildings used as staff quarters in China. We can provide no assurance that the PCB Subsidiaries will be able to obtain relevant land use certificates in a timely manner or at all, or that our results of operations or financial condition would not be adversely affected due to the lack of such certificates. Any requirement to cease using the relevant property and premises could also have a material adverse effect on our business.
 
In addition, certain of the properties where one PCB Subsidiary’s facilities is located are subject to a general city rezoning plan which has been prepared by the Dongguan municipal government. According to the relevant PRC


18


Table of Contents

regulations, the general rezoning plan is made for twenty years. Under the rezoning plan, it is intended that the properties where these facilities are located will be re-designated from industrial to commercial use. If and when implemented in respect of those properties, the rezoning plan may require us to vacate these properties and relocate the facilities.
 
In the event we are required to vacate the above properties, we would implement certain strategies to minimize any loss of production capacity during relocation. There can be no assurance that our strategies to deal with the relocation of the facilities can be implemented, or that such strategies can be implemented before we are required to vacate the above properties due to the proposed general city rezoning plan. If we are required to relocate the facilities, our results of operation and financial condition may be materially and adversely affected.
 
We depend on the U.S. government for a substantial portion of our business, which involves unique risks.
 
A significant portion of our revenues is derived from products and services ultimately sold to the U.S. government by our OEMs and EMS customers and is therefore affected by, among other things, the federal budget process. We are a supplier, primarily as a subcontractor, to the U.S. government and its agencies as well as foreign governments and agencies. While our sales to OEMs and EMS resellers are made through purchase orders that are not subject to cancellation, returns, or re-negotiation, the contracts between our direct customers and the government end user are subject to political and budgetary constraints and processes, changes in short-range and long-range strategic plans, the timing of contract awards, the congressional budget authorization and appropriation processes, the government’s ability to terminate contracts for convenience or for default, as well as other risks such as contractor suspension or debarment in the event of certain violations of legal and regulatory requirements. The termination or failure to fund one or more significant contracts by the U.S. government could have a material adverse effect on our business, results of operations or prospects.
 
Changes in government defense spending could have a material adverse effect on our business.
 
In 2010, aerospace/defense sales accounted for approximately 20% of our total net sales. The substantial majority of these sales are related to both U.S. and foreign military and defense programs. While we do not sell directly to the U.S. government, we are a supplier to the U.S. government and its agencies as well as foreign governments and agencies. Consequently, our sales are affected by changes in the defense budgets of the U.S. and foreign governments. The domestic and international threat of terrorist activity, emerging nuclear states and conventional military threats have led to an increase in demand for defense products and services and homeland security solutions in the recent past. The U.S. government, however, is facing unprecedented budgeting constraints and a decline in U.S. defense expenditures generally could adversely affect our business.
 
We depend upon a relatively small number of OEM customers for a large portion of our sales, and a decline in sales to major customers could harm our results of operations.
 
A small number of customers is responsible for a significant portion of our sales. Our five largest OEM customers accounted for approximately 28%, 34% and 29% of our net sales for the year ended December 31, 2010, 2009 and 2008, respectively. Sales attributed to OEMs include both direct sales as well as sales that the OEMs place through EMS providers. Our customer concentration could fluctuate, depending on future customer requirements, which will depend in large part on market conditions in the electronics industry segments in which our customers participate. The loss of one or more significant customers or a decline in sales to our significant customers could harm our business, results of operations, and financial condition and lead to declines in the trading price of our common stock. In addition, we generate significant accounts receivable in connection with providing manufacturing services to our customers. If one or more of our significant customers were to become insolvent or were otherwise unable to pay for the manufacturing services provided by us, our results of operations would be harmed.
 
In addition, during industry downturns, we may need to reduce prices at customer requests to limit the level of order losses, and we may be unable to collect payments from our customers. There can be no assurance that key customers would not cancel orders, that they would continue to place orders with us in the future at the same levels as experienced by us in prior periods, that they would be able to meet their payment obligations, or that the end-products which use our products would be successful. This concentration of customer base may materially and


19


Table of Contents

adversely affect our operating results due to the loss or cancellation of business from any of these key customers, significant changes in scheduled deliveries to any of these customers, or decreases in the prices of the products sold to any of these customers.
 
We are subject to the requirements of the National Industrial Security Program Operating Manual for our facility security clearance, which is a prerequisite to our ability to perform on classified contracts for the U.S. government.
 
A facility security clearance is required in order to be awarded and perform on classified contracts for the DoD and certain other agencies of the U.S. government. As a cleared entity, we must comply with the requirements of the National Industrial Security Program Operating Manual, or NISPOM, and any other applicable U.S. government industrial security regulations. Further, due to the fact that a significant portion of our voting equity is owned by a non-U.S. entity, we are required to be governed by and operate in accordance with the terms and requirements of the Special Security Agreement described in “Business — National Security Matters.” The terms of the SSA have been previously disclosed in our SEC filings.
 
If we were to violate the terms and requirements of the SSA, the NISPOM, or any other applicable U.S. government industrial security regulations (which may apply to us under the terms of classified contracts), we could lose our security clearance. We cannot be certain that we will be able to maintain our security clearance. If for some reason our security clearance is invalidated or terminated, we may not be able to continue to perform on classified contracts and would not be able to enter into new classified contracts, which could adversely affect our revenues.
 
If we are unable to respond to rapid technological change and process development, we may not be able to compete effectively.
 
The market for our manufacturing services is characterized by rapidly changing technology and continual implementation of new production processes. The future success of our business will depend in large part upon our ability to maintain and enhance our technological capabilities, to manufacture products that meet changing customer needs, and to successfully anticipate or respond to technological changes on a cost-effective and timely basis. We expect that the investment necessary to maintain our technological position will increase as customers make demands for products and services requiring more advanced technology on a quicker turnaround basis. We may not be able to raise additional funds in order to respond to technological changes as quickly as our competitors.
 
In addition, the PCB industry could encounter competition from new or revised manufacturing and production technologies that render existing manufacturing and production technology less competitive or obsolete. We may not respond effectively to the technological requirements of the changing market. If we need new technologies and equipment to remain competitive, the development, acquisition, and implementation of those technologies and equipment may require us to make significant capital investments.
 
If we are unable to provide our customers with high-end technology, high quality products, and responsive service, or if we are unable to deliver our products to our customers in a timely manner, our results of operations and financial condition may suffer.
 
In order to maintain our existing customer base and obtain business from new customers, we must demonstrate our ability to produce our products at the level of technology, quality, responsiveness of service, timeliness of delivery, and at costs that our customers require. If our products are of substandard quality, if they are not delivered on time, if we are not responsive to our customers’ demands, or if we cannot meet our customers’ technological requirements, our reputation as a reliable supplier of our products would likely be damaged. If we are unable to meet these product and service standards, we may be unable to obtain new contracts or keep our existing customers, and this could have a material adverse effect on our results of operations and financial condition.


20


Table of Contents

If we are unable to maintain satisfactory capacity utilization rates, our results of operations and financial condition would be adversely affected.
 
Given the high fixed costs of our operations, decreases in capacity utilization rates can have a significant effect on our business. Accordingly, our ability to maintain or enhance gross margins would continue to depend, in part, on maintaining satisfactory capacity utilization rates. In turn, our ability to maintain satisfactory capacity utilization would depend on the demand for our products, the volume of orders we receive, and our ability to offer products that meet our customers’ requirements at competitive prices. If current or future production capacity fails to match current or future customer demands, our facilities would be underutilized and we would be less likely to achieve expected gross margins.
 
Competition in the PCB market is intense, and we could lose market share if we are unable to maintain our current competitive position in end markets using our quick-turn, high technology and high-mix manufacturing services.
 
The PCB industry is intensely competitive, highly fragmented, and rapidly changing. We expect competition to continue, which could result in price reductions, reduced gross margins, and loss of market share. Our principal PCB and substrate competitors include Unimicron, Ibiden, Nippon Mektron, Tripod, Foxconn, DDi, Sanmina-SCI, Multek and Wus. Our principal backplane assembly competitors include Amphenol, Simclar-SCI, Simclar, TT Electronics, and Viasystems. In addition, we increasingly compete on an international basis, and new and emerging technologies may result in new competitors entering our markets.
 
Some of our competitors and potential competitors have advantages over us, including:
 
  •  greater financial and manufacturing resources that can be devoted to the development, production, and sale of their products;
 
  •  more established and broader sales and marketing channels;
 
  •  more manufacturing facilities worldwide, some of which are closer in proximity to OEMs;
 
  •  manufacturing facilities that are located in countries with lower production costs;
 
  •  lower capacity utilization, which in peak market conditions can result in shorter lead times to customers;
 
  •  ability to add additional capacity faster or more efficiently;
 
  •  preferred vendor status with existing and potential customers;
 
  •  greater name recognition; and
 
  •  larger customer bases.
 
In addition, these competitors may respond more quickly to new or emerging technologies, or adapt more quickly to changes in customer requirements, and devote greater resources to the development, promotion, and sale of their products than we do. We must continually develop improved manufacturing processes to meet our customers’ needs for complex products, and our manufacturing process technology is generally not subject to significant proprietary protection. During recessionary periods in the electronics industry, our strategy of providing quick-turn services, an integrated manufacturing solution, and responsive customer service may take on reduced importance to our customers. As a result, we may need to compete more on the basis of price, which could cause our gross margins to decline. Periodically, PCB manufacturers and backplane assembly providers experience overcapacity. Overcapacity, combined with weakness in demand for electronic products, results in increased competition and price erosion for our products.
 
The increasing prominence of EMS companies as our customers could reduce our gross margins, potential sales, and customers.
 
Sales to EMS companies represented approximately 45%, 47% and 52% of our net sales for the year ended December 31, 2010, 2009 and 2008, respectively. Sales to EMS providers include sales directed by OEMs as well as orders placed with us at the EMS providers’ discretion. EMS providers source on a global basis to a greater extent


21


Table of Contents

than OEMs. The growth of EMS providers increases the purchasing power of such providers and could result in increased price competition or the loss of existing OEM customers. In addition, some EMS providers, including some of our customers, have the ability to directly manufacture PCBs and create backplane assemblies. If a significant number of our other EMS customers were to acquire these abilities, our customer base might shrink, and our sales might decline substantially. Moreover, if any of our OEM customers outsource the production of PCBs and creation of backplane assemblies to these EMS providers, our business, results of operations, and financial condition may be harmed.
 
The global financial crisis may impact our business and financial condition in ways that we currently cannot predict.
 
The continued credit crisis and related turmoil in the global financial system have had and may continue to have an impact on our business and financial condition. In addition to the impact that the global financial crisis has already had on us, we may face significant challenges if conditions in the financial markets do not improve. For example, continuation of the credit crisis could adversely impact overall demand in the electronics industry, which could have a negative effect on our revenues and profitability. In addition, our ability to access the capital markets may be severely restricted at a time when we would like, or need, to do so, which could have an impact on our flexibility to react to changing economic and business conditions or our ability to pursue acquisitions.
 
During periods of excess global PCB manufacturing capacity, our gross margins may fall and/or we may have to incur restructuring charges if we choose to reduce the capacity of or close any of our facilities.
 
When we experience excess capacity, our sales revenues may not fully cover our fixed overhead expenses, and in such a case our gross margins will fall. In addition, we generally schedule our QTA production facilities at less than full capacity to retain our ability to respond to unexpected additional quick-turn orders. However, if these orders are not received, we may forego some production and could experience continued excess capacity. If we conclude we have significant, long-term excess capacity, we may decide to permanently close one or more of our facilities, and lay off some of our employees. Closures or lay-offs could result in our recording restructuring charges such as severance, other exit costs, and asset impairments.
 
If we are unable to manage our growth effectively, our business could be negatively affected.
 
We have experienced, and expect to continue to experience, growth in the scope and complexity of our operations. This growth may strain our managerial, financial, manufacturing, and other resources. In order to manage our growth, we may be required to continue to implement additional operating and financial controls and hire and train additional personnel. There can be no assurance that we will be able to do so in the future, and failure to do so could jeopardize our expansion plans and seriously harm our operations. In addition, growth in our capacity could result in reduced capacity utilization and a corresponding decrease in gross margins.
 
We export defense and commercial products from the United States to other countries. If we were to fail to comply with export laws, we could be subject to fines and other punitive actions.
 
Exports from the United States are regulated by the U.S. Department of State and U.S. Department of Commerce, and exports from China are regulated by certain PRC authorities. Other foreign countries also regulate exports of products that may be manufactured by us. Failure to comply with these regulations can result in significant fines and penalties. Additionally, violations of these laws can result in punitive penalties, which would restrict or prohibit us from exporting certain products, resulting in significant harm to our business.
 
Our failure to comply with the requirements of environmental laws could result in litigation, fines and revocation of permits necessary to our manufacturing processes. Failure to operate in conformance with environmental laws could lead to debarment from our participation in federal government contracts.
 
Our operations are regulated under a number of federal, state, local, and foreign environmental and safety laws and regulations that govern, among other things, the discharge of hazardous materials into the air and water, as well as the handling, storage, and disposal of such materials. These laws and regulations include the Clean Air Act, the


22


Table of Contents

Clean Water Act, the Resource Conservation and Recovery Act, the Superfund Amendment and Reauthorization Act, the Comprehensive Environmental Response, Compensation and Liability Act, the Toxic Substances Control Act, and the Federal Motor Carrier Safety Improvement Act as well as analogous state, local, and foreign laws. Compliance with these environmental laws is a major consideration for us because our manufacturing processes use and generate materials classified as hazardous. Because we use hazardous materials and generate hazardous wastes in our manufacturing processes, we may be subject to potential financial liability for costs associated with the investigation and remediation of our own sites, or sites at which we have arranged for the disposal of hazardous wastes, if such sites become contaminated. Even if we fully comply with applicable environmental laws and are not directly at fault for the contamination, we may still be liable. The wastes we generate include spent ammoniacal and cupric etching solutions, metal stripping solutions, waste acid solutions, waste alkaline cleaners, waste oil, and waste waters that contain heavy metals such as copper, tin, lead, nickel, gold, silver, cyanide, and fluoride, and both filter cake and spent ion exchange resins from equipment used for on-site waste treatment.
 
Any material violations of environmental laws or failure to maintain required environmental permits could subject us to fines, penalties, and other sanctions, including the revocation of our effluent discharge permits, which could require us to cease or limit production at one or more of our facilities, and harm our business, results of operations, and financial condition. Even if we ultimately prevail, environmental lawsuits against us would be time consuming and costly to defend.
 
Prior to our acquisition of our PCG business, PCG made legal commitments to the U.S. EPA and to the State of Connecticut regarding settlement of enforcement actions related to the PCG operations in Connecticut. The obligations include fulfillment of a Compliance Management Plan until July 1, 2009 and installation of two rinse water recycling systems at the Stafford, Connecticut facilities. To date we have installed both of the recycling systems. Failure to meet the remaining commitment could result in further costly enforcement actions, including exclusion from participation in defense and other federal contracts, which would materially harm our business, results of operations, and financial condition.
 
Environmental laws also could become more stringent over time, imposing greater compliance costs and increasing risks and penalties associated with violation. We operate in environmentally sensitive locations, and we are subject to potentially conflicting and changing regulatory agendas of political, business, and environmental groups. Changes or restrictions on discharge limits, emissions levels, material storage, handling, or disposal might require a high level of unplanned capital investment or global relocation. It is possible that environmental compliance costs and penalties from new or existing regulations may harm our business, results of operations, and financial condition.
 
We are increasingly required to certify compliance with various material content restrictions in our products based on laws of various jurisdictions or territories such as the Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) directives in the European Union and China’s RoHS legislation. New York City has adopted identical RoHS restrictions and many U.S. states are considering similar rules and legislation. In addition, we must also certify as to the non-applicability to the EU’s Waste Electrical and Electronic Equipment directive for certain products that we manufacture. The REACH directive requires adoption of Substances of Very High Concern (SVHCs) periodically. We must survey our supply chain and certify to the non-presence or presence of SVHCs to our customers. Currently, four lists totaling 46 SVHCs have been adopted by the EU. As with other types of product certifications that we routinely provide, we may incur liability and pay damages if our products do not conform to our certifications.
 
New regulations could require us to acquire costly equipment or to incur other significant expenses. Any failure by us to control the use of, or adequately restrict the discharge of, hazardous substances could subject us to substantial future liabilities.
 
We are also subject to a variety of environmental laws and regulations in the People’s Republic of China, or PRC, which impose limitations on the discharge of pollutants into the air and water and establish standards for the treatment, storage, and disposal of solid and hazardous wastes. The manufacturing of our products generates gaseous chemical wastes, liquid wastes, waste water and other industrial wastes from various stages of the manufacturing process. Production sites in China are subject to regulation and periodic monitoring by the relevant


23


Table of Contents

environmental protection authorities. Environmental claims or the failure to comply with current or future regulations could result in the assessment of damages or imposition of fines against us, suspension of production, or cessation of operations.
 
Because we sell on a purchase order basis, we are subject to uncertainties and variability in demand by our customers that could decrease revenues and harm our operating results.
 
We generally sell to customers on a purchase order basis rather than pursuant to long-term contracts. Our quick-turn orders are subject to particularly short lead times. Consequently, our sales are subject to short-term variability in demand by our customers. Customers submitting purchase orders may cancel, reduce, or delay their orders for a variety of reasons. The level and timing of orders placed by our customers may vary, due to:
 
  •  customer attempts to manage inventory;
 
  •  changes in customers’ manufacturing strategies, such as a decision by a customer to either diversify or consolidate the number of PCB manufacturers or backplane assembly service providers used or to manufacture or assemble its own products internally;
 
  •  variation in demand for our customers’ products; and
 
  •  changes in new product introductions.
 
We have periodically experienced terminations, reductions, and delays in our customers’ orders. Further terminations, reductions, or delays in our customers’ orders could harm our business, results of operations, and financial condition.
 
Our results of operations are often subject to demand fluctuations and seasonality. With a high level of fixed operating costs, even small revenue shortfalls would decrease our gross margins and potentially cause the trading price of our common stock to decline.
 
Our results of operations fluctuate for a variety of reasons, including:
 
  •  timing of orders from and shipments to major customers;
 
  •  the levels at which we utilize our manufacturing capacity;
 
  •  price competition;
 
  •  changes in our mix of revenues generated from quick-turn versus standard delivery time services;
 
  •  expenditures, charges or write-offs, including those related to acquisitions, facility restructurings, or asset impairments; and
 
  •  expenses relating to expanding existing manufacturing facilities.
 
A significant portion of our operating expenses is relatively fixed in nature, and planned expenditures are based in part on anticipated orders. Accordingly, unexpected revenue shortfalls may decrease our gross margins. In addition, we have experienced sales fluctuations due to seasonal patterns in the capital budgeting and purchasing cycles, as well as inventory management practices of our customers and the end markets we serve. In particular, the seasonality of the computer industry and quick-turn ordering patterns affect the overall PCB industry. These seasonal trends have caused fluctuations in our operating results in the past and may continue to do so in the future. Results of operations in any period should not be considered indicative of the results to be expected for any future period. In addition, our future quarterly operating results may fluctuate and may not meet the expectations of securities analysts or investors. If this occurs, the trading price of our common stock likely would decline.


24


Table of Contents

Increasingly, our larger customers are requesting that we enter into supply agreements with them that have increasingly restrictive terms and conditions. These agreements typically include provisions that increase our financial exposure, which could result in significant costs to us.
 
Increasingly, our larger customers are requesting that we enter into supply agreements with them. These agreements typically include provisions that generally serve to increase our exposure for product liability and warranty claims — as compared to our standard terms and conditions — which could result in higher costs to us as a result of such claims. In addition, these agreements typically contain provisions that seek to limit our operational and pricing flexibility and extend payment terms, which can adversely impact our cash flow and results of operations.
 
Our business has benefited from OEMs deciding to outsource their PCB manufacturing and backplane assembly needs to us. If OEMs choose to provide these services in-house or select other providers, our business could suffer.
 
Our future revenue growth partially depends on new outsourcing opportunities from OEMs. Current and prospective customers continuously evaluate our performance against other providers. They also evaluate the potential benefits of manufacturing their products themselves. To the extent that outsourcing opportunities are not available either due to OEM decisions to produce these products themselves or to use other providers, our financial results and future growth could be adversely affected.
 
We may not be able to fully recover our costs for providing design services to our customers, which could harm our financial results.
 
Although we enter into design service activities with purchase order commitments, the cost of labor and equipment to provide these services may in fact exceed what we are able to fully recover through purchase order coverage. We also may be subject to agreements with customers in which the cost of these services is recovered over a period of time or through a certain number of units shipped as part of the ongoing product price. While we may make contractual provisions to recover these costs in the event that the product does not go into production, the actual recovery can be difficult and may not happen in full. In other instances, the business relationship may involve investing in these services for a customer as an ongoing service not directly recoverable through purchase orders. In any of these cases, the possibility exists that some or all of these activities are considered costs of doing business, are not directly recoverable, and may adversely impact our operating results.
 
We face a risk that capital needed for our business and to repay our debt obligations will not be available when we need it. Additionally, our leverage and our debt service obligations may adversely affect our cash flow.
 
As of December 31, 2010, we had total indebtedness of approximately $555.4 million, which represented approximately 40% of our total capitalization.
 
Our indebtedness could have significant negative consequences, including:
 
  •  increasing our vulnerability to general adverse economic and industry conditions;
 
  •  limiting our ability to obtain additional financing;
 
  •  requiring the use of a substantial portion of any cash flow from operations to service our indebtedness, thereby reducing the amount of cash flow available for other purposes, including capital expenditures;
 
  •  limiting our flexibility in planning for, or reacting to, changes in our business and the industry in which we compete; and
 
  •  placing us at a possible competitive disadvantage to less leveraged competitors and competitors that have better access to capital resources.


25


Table of Contents

 
A trend toward consolidation among our customers could adversely affect our business.
 
Recently, some of our large customers have consolidated and further consolidation of customers may occur. Depending on which organization becomes the controller of the supply chain function following the consolidation, we may not be retained as a preferred or approved supplier. In addition, product duplication could result in the termination of a product line that we currently support. While there is potential for increasing our position with the combined customer, there does exist the potential for decreased revenue if we are not retained as a continuing supplier. We also face the risk of increased pricing pressure from the combined customer because of its increased market share.
 
We are exposed to the credit risk of some of our customers and to credit exposures in weakened markets.
 
Most of our sales are on an “open credit” basis, with standard industry payment terms. We monitor individual customer payment capability in granting such open credit arrangements, seek to limit such open credit to amounts we believe the customers can pay, and maintain reserves we believe are adequate to cover exposure for doubtful accounts. During periods of economic downturn in the electronics industry and the global economy, our exposure to credit risks from our customers increases. Although we have programs in place to monitor and mitigate the associated risks, such programs may not be effective in reducing our credit risks.
 
Our 10 largest OEM customers accounted for approximately 42%, 56% and 49% of our net sales for the years ended December 31, 2010, 2009 and 2008, respectively. Additionally, our OEM customers often direct a significant portion of their purchases through a relatively limited number of EMS companies. Our contractual relationship is often with the EMS companies, who are obligated to pay us for our products. Because we expect our OEM customers to continue to direct our sales to EMS companies, we expect to continue to be subject to this credit risk with a limited number of EMS customers. If one or more of our significant customers were to become insolvent or were otherwise unable to pay us, our results of operations would be harmed.
 
Some of our customers are EMS companies located abroad. Our exposure has increased as these foreign customers continue to expand. Our foreign receivables were approximately 26% and 24% of our net accounts receivable as of December 31, 2010 and 2009, respectively, and are expected to continue to grow as a percentage of our total receivables. We do not utilize credit insurance as a risk management tool.
 
A continued increase in the cost of raw materials could have an adverse impact on our business and reduce our gross margins.
 
To manufacture PCBs, we use raw materials such as laminated layers of fiberglass, copper foil, chemical solutions, gold, and other commodity products, which we order from our suppliers. In the case of backplane assemblies, components include connectors, sheet metal, capacitors, resistors and diodes, many of which are custom made and controlled by our customers’ approved vendors. The supply of raw materials has tightened recently and commodities prices have risen. These increases in raw material and component prices, if sustained, can negatively affect our gross margins. For example, we have recently experienced an increase in the price we pay for gold. In general, we are able to pass this price increase on to our customers, but we cannot be certain we will continue to be able to do so in the future.
 
We rely on suppliers for the timely delivery of raw materials and components used in manufacturing our PCBs and backplane assemblies. If a raw material supplier fails to satisfy our product quality standards, it could harm our customer relationships.
 
Although we have preferred suppliers for most of these raw materials, the materials we use are generally readily available in the open market, and numerous other potential suppliers exist. The components for backplane assemblies in some cases have limited or sole sources of supply. Consolidations and restructuring in our supplier base may result in adverse materials pricing due to reduction in competition among our suppliers. Furthermore, if a raw material or component supplier fails to satisfy our product quality standards, it could harm our customer relationships. Suppliers may from time to time extend lead times, limit supplies, or increase prices, due to capacity constraints or other factors, which could harm our ability to deliver our products on a timely basis.


26


Table of Contents

Our acquisition strategy involves numerous risks.
 
As part of our business strategy, we expect that we will continue to grow by pursuing acquisitions of businesses, technologies, assets, or product lines that complement or expand our business. Risks related to an acquisition may include:
 
  •  the potential inability to successfully integrate acquired operations and businesses or to realize anticipated synergies, economies of scale, or other expected value;
 
  •  diversion of management’s attention from normal daily operations of our existing business to focus on integration of the newly acquired business;
 
  •  unforeseen expenses associated with the integration of the newly acquired business;
 
  •  difficulties in managing production and coordinating operations at new sites;
 
  •  the potential loss of key employees of acquired operations;
 
  •  the potential inability to retain existing customers of acquired companies when we desire to do so;
 
  •  insufficient revenues to offset increased expenses associated with acquisitions;
 
  •  the potential decrease in overall gross margins associated with acquiring a business with a different product mix;
 
  •  the inability to identify certain unrecorded liabilities;
 
  •  the potential need to restructure, modify, or terminate customer relationships of the acquired company;
 
  •  an increased concentration of business from existing or new customers; and
 
  •  the potential inability to identify assets best suited to our business plan.
 
Acquisitions may cause us to:
 
  •  enter lines of business and/or markets in which we have limited or no prior experience;
 
  •  issue debt and be required to abide by stringent loan covenants;
 
  •  assume liabilities;
 
  •  record goodwill and indefinite-lived intangible assets that will be subject to impairment testing and potential periodic impairment charges;
 
  •  become subject to litigation and environmental issues, which include product material content certifications;
 
  •  incur unanticipated costs;
 
  •  incur large and immediate write-offs;
 
  •  issue common stock that would dilute our current stockholders’ percentage ownership; and
 
  •  incur substantial transaction-related costs, whether or not a proposed acquisition is consummated.
 
Acquisitions of high technology companies are inherently risky, and no assurance can be given that our recent or future acquisitions will be successful and will not harm our business, operating results, or financial condition. Failure to manage and successfully integrate acquisitions we make could harm our business and operating results in a material way. Even when an acquired company has already developed and marketed products, product enhancements may not be made in a timely fashion. In addition, unforeseen issues might arise with respect to such products after the acquisition.


27


Table of Contents

Products we manufacture may contain design or manufacturing defects, which could result in reduced demand for our services and liability claims against us.
 
We manufacture products to our customers’ specifications, which are highly complex and may contain design or manufacturing errors or failures, despite our quality control and quality assurance efforts. Defects in the products we manufacture, whether caused by a design, manufacturing, or materials failure or error, may result in delayed shipments, customer dissatisfaction, a reduction or cancellation of purchase orders, or liability claims against us. If these defects occur either in large quantities or too frequently, our business reputation may be impaired. Our sales mix has shifted towards standard delivery time products, which have larger production runs, thereby increasing our exposure to these types of defects. Since our products are used in products that are integral to our customers’ businesses, errors, defects, or other performance problems could result in financial or other damages to our customers beyond the cost of the PCB, for which we may be liable. Although our invoices and sales arrangements generally contain provisions designed to limit our exposure to product liability and related claims, existing or future laws or unfavorable judicial decisions could negate these limitation of liability provisions. Product liability litigation against us, even if it were unsuccessful, would be time consuming and costly to defend. Although we maintain technology errors and omissions insurance, we cannot assure you that we will continue to be able to purchase such insurance coverage in the future on terms that are satisfactory to us, if at all.
 
Our business may suffer if any of our key senior executives discontinues employment with us or if we are unable to recruit and retain highly skilled engineering and sales staff.
 
Our future success depends to a large extent on the services of our key managerial employees. We may not be able to retain our executive officers and key personnel or attract additional qualified management in the future. Our business also depends on our continuing ability to recruit, train, and retain highly qualified employees, particularly engineering and sales and marketing personnel. The competition for these employees is intense, and the loss of these employees could harm our business. Further, our ability to successfully integrate acquired companies depends in part on our ability to retain key management and existing employees at the time of the acquisition.
 
Our manufacturing processes depend on the collective industry experience of our employees. If a significant number of these employees were to leave us, it could limit our ability to compete effectively and could harm our financial results.
 
We have limited patent or trade secret protection for our manufacturing processes. We rely on the collective experience of our employees involved in our manufacturing processes to ensure we continuously evaluate and adopt new technologies in our industry. Although we are not dependent on any one employee or a small number of employees, if a significant number of our employees involved in our manufacturing processes were to leave our employment, and we were not able to replace these people with new employees with comparable experience, our manufacturing processes might suffer as we might be unable to keep up with innovations in the industry. As a result, we may lose our ability to continue to compete effectively.
 
We may be exposed to intellectual property infringement claims by third parties that could be costly to defend, could divert management’s attention and resources, and if successful, could result in liability.
 
We rely on a combination of copyright, patent, trademark and trade secret laws, confidentiality procedures, contractual provisions, and other measures to protect our proprietary information. All of these measures afford only limited protection. These measures may be invalidated, circumvented, or challenged, and others may develop technologies or processes that are similar or superior to our technology. We may not have the controls and procedures in place that are needed to adequately protect proprietary information. Despite our efforts to protect our proprietary rights, unauthorized parties may attempt to copy our products or obtain or use information that we regard as proprietary, which could adversely impact our revenues and financial condition.
 
Furthermore, there is a risk that we may infringe on the intellectual property rights of others. As is the case with many other companies in the PCB industry, we from time to time receive communications from third parties asserting patent rights to our products and enter into discussions with such third parties. Irrespective of the validity or the successful assertion of such claims, we could incur costs in either defending or settling any intellectual


28


Table of Contents

property disputes alleging infringement. If any claims are brought against the customers for such infringement, whether or not these have merit, we could be required to expend significant resources in defending such claims. In the event we are subject to any infringement claims, we may be required to spend a significant amount of money to develop non-infringing alternatives or obtain licenses. We may not be successful in developing such alternatives or in obtaining such licenses on reasonable terms or at all, which could disrupt the production processes, damage our reputation, and affect our revenues and financial condition.
 
Damage to our manufacturing facilities due to fire, natural disaster, or other events could harm our financial results.
 
We have seven manufacturing and assembly facilities in the United States and eight manufacturing and assembly facilities in China and Hong Kong. The destruction or closure of any of our facilities for a significant period of time as a result of fire, explosion, blizzard, act of war or terrorism, flood, tornado, earthquake, lightning, or other natural disaster could harm us financially, increasing our costs of doing business and limiting our ability to deliver our manufacturing services on a timely basis.
 
Our business and operations could be adversely impacted by climate change initiatives.
 
Our manufacturing processes require that we purchase significant quantities of energy from third parties, which results in the generation of greenhouse gases, either directly on-site or indirectly at electric utilities. Both domestic and international legislation to address climate change by reducing greenhouse gas emissions could create increases in energy costs and price volatility. Considerable international attention is now focused on development of an international policy framework to guide international action to address climate change. Proposed and existing legislative efforts to control or limit greenhouse gas emissions could affect our energy sources and supply choices as well as increase the cost of energy and raw materials derived from sources that generate greenhouse gas emissions.
 
Unanticipated changes in our tax rates or in our assessment of the realizability of our deferred income tax assets or exposure to additional income tax liabilities could affect our operating results and financial condition.
 
We are subject to income taxes in the United States and various foreign jurisdictions. Significant judgment is required in determining our provision for income taxes and, in the ordinary course of business, there are many transactions and calculations in which the ultimate tax determination is uncertain. Our effective tax rates could be adversely affected by changes in the mix of earnings in countries and states with differing statutory tax rates, changes in the valuation of deferred income tax assets and liabilities, changes in tax laws, as well as other factors. Our tax determinations are regularly subject to audit by tax authorities, and developments in those audits could adversely affect our income tax provision. Although we believe that our tax estimates are reasonable, the final determination of tax audits or tax disputes may be different from what is reflected in our historical income tax provisions, which could affect our operating results.
 
If our net earnings do not remain at or above recent levels, or we are not able to predict with a reasonable degree of probability that they will continue, we may have to record a valuation allowance against our net deferred income tax assets.
 
As of December 31, 2010, we had net deferred income tax assets of approximately $18.3 million. Based on our forecast for future taxable earnings, we believe we will utilize the deferred income tax assets in future periods. However, if our estimates of future earnings are lower than expected, we may record a higher income tax provision due to a write down of our net deferred income tax assets, which would reduce our earnings per share. Additionally, the ability to utilize deferred income tax assets is dependent upon the generation of taxable income in the specific tax jurisdictions that have deferred income tax assets.


29


Table of Contents

If events or circumstances occur in our business that indicate that our goodwill and definite-lived intangibles may not be recoverable, we could have impairment charges that would negatively affect our earnings.
 
As of December 31, 2010, our consolidated balance sheet reflected $295.7 million of goodwill and definite-lived intangible assets. We periodically evaluate whether events and circumstances have occurred, such that the potential for reduced expectations for future cash flows coupled with further decline in the market price of our stock and market capitalization may indicate that the remaining balance of goodwill and definite-lived intangible assets may not be recoverable. If factors indicate that assets are impaired, we would be required to reduce the carrying value of our goodwill and definite-lived intangible assets, which could harm our results during the periods in which such a reduction is recognized. Our goodwill and definite-lived intangible assets may increase in future periods if we consummate other acquisitions. Amortization or impairment of these additional intangibles would, in turn, reduce our earnings.
 
The economies of the countries in which we operate may be adversely affected by a recurrence of severe acute respiratory syndrome, or an outbreak of other epidemics such as H1N1 or avian flu.
 
Past occurrences of epidemics or pandemics, depending on their scale of occurrence, have caused different degrees of damage to the national and local economies in the affected countries. A recurrence of SARS or an outbreak of any other epidemics or pandemics, such as the H1N1 influenza or avian flu, especially in the areas where we have operations, or where we may have operations in the future, may result in quarantines, temporary closures of offices and manufacturing facilities, travel restrictions, or the temporary or permanent loss of key personnel. The perception that an outbreak of contagious disease may occur again may also have an adverse effect on the economic conditions of affected countries. Any of the above may cause material disruptions to our operations, which in turn may adversely affect our financial condition and results of operations.
 
We are subject to risks of currency fluctuations.
 
A portion of our cash and other current assets is held in currencies other than the U.S. dollar. As of December 31, 2010, we had an aggregate of approximately $256.0 million in current assets denominated in Chinese RMB and the Hong Kong Dollar (HKD). Changes in exchange rates among other currencies and the U.S. dollar will affect the value of these assets as translated to U.S. dollars in our balance sheet. To the extent that we ultimately decide to repatriate some portion of these funds to the United States, the actual value transferred could be impacted by movements in exchange rates. Any such type of movement could negatively impact the amount of cash available to fund operations or to repay debt. Significant inflation or disproportionate changes in foreign exchange rates could occur as a result of general economic conditions, acts of war or terrorism, changes in governmental monetary or tax policy, or changes in local interest rates. The impact of future exchange rate fluctuations between the U.S. Dollar and the RMB and the U.S. Dollar and the HKD cannot be predicted. To the extent that we may have outstanding indebtedness denominated in the RMB or in the HKD, the appreciation of the RMB and the HKD against the U.S. Dollar will have an adverse impact on our financial condition and results of operations (including the cost of servicing, and the value in our balance sheet of, the RMB and HKD-denominated indebtedness).
 
Further, China’s government imposes control over the convertibility of RMB into foreign currencies. Pursuant to certain PRC regulations, conversion of RMB into foreign exchange from foreign exchange accounts in China is based on, among other things, a board resolution declaring the distribution of a dividend and payment of profits. Remittance of such amounts to foreign investors from the foreign exchange accounts of the foreign invested enterprises in China or conversion of the RMB into foreign currencies at designated foreign exchange banks for the remittance of dividends and profits do not require permission from the State Administration of Foreign Exchange, or SAFE, and other applicable governmental authorities of China do not impose restrictions on the category of recurring international payments and transfers. However, conversion of RMB into foreign currencies for capital account items, including direct investment, loans, and security investment, must be approved by SAFE and the relevant branch. These regulations and procedures subject us to further currency exchange risks.


30


Table of Contents

ITEM 1B.   UNRESOLVED STAFF COMMENTS
 
None.
 
ITEM 2.   PROPERTIES
 
The following table describes our principal manufacturing facilities and our drilling and tooling process facility.
 
                         
    Leased
    Owned
    Total
 
US Locations(1)
  Square Feet     Square Feet     Square Feet  
 
Chippewa Falls, WI
          281,000       281,000  
Logan, UT
          124,104       124,104  
San Diego, CA
    37,500             37,500  
Santa Ana, CA
    8,287       82,600       90,887  
Santa Clara, CA
    18,304       45,685       63,989  
Stafford, CT
    21,251       156,000       177,251  
Stafford Springs, CT
    10,000       53,000       63,000  
                         
Total
    95,342       742,389       837,731  
                         
Foreign Locations(3)
                       
Hong Kong (OPCM)
    86,982             86,982  
Dongguan, China (SYE)
          422,971       422,971  
Dongguan, China (DMC)
          1,322,803       1,322,803  
Guangzhou, China (GME)
          968,028       968,028  
Shanghai, China(1)
    85,745             85,745  
Shanghai, China (SME)
          416,761       416,761  
Shanghai, China (SMST/SP)
          521,257       521,257  
Shanghai, China (SKE)(2)
    3,294       135,207       138,501  
Suzhou, China (MAS)
          1,129,690       1,129,690  
                         
      176,021       4,916,717       5,092,738  
 
We maintain our properties in good operating condition. We believe that our properties are suitable and adequate for us to operate at present levels, and the productive capacity and extent of utilization of the facilities are appropriate for our existing real estate requirements.
 
 
(1) Locations pertain to our North America segment
 
(2) Drilling and tooling process facility
 
(3) Foreign locations represents the following subsidiaries:
 
  •  OPC Manufacturing Limited (OPCM)
 
  •  Dongguan Shengyi Electronics Ltd. (SYE)
 
  •  Dongguan Meadville Circuits Limited (DMC)
 
  •  Guangzhou Meadville Electronics Co., Ltd. (GME)
 
  •  Shanghai Meadville Electronics Co., Ltd. (SME)
 
  •  Shanghai Meadville Science & Technology Co., Ltd. (SMST/SP)
 
  •  Shanghai Kaiser Electronics Co., Ltd. (SKE)
 
  •  Meadville Aspocomp (Suzhou) Electronics Co., Ltd. (MAS)


31


Table of Contents

 
ITEM 3.   LEGAL PROCEEDINGS
 
From time to time, we may become a party to various legal proceedings arising in the ordinary course of our business. There can be no assurance that we will prevail in any such litigation. We believe that the amount of any ultimate potential loss for known matters would not be material to our financial condition, however, the outcome of these actions is inherently difficult to predict. In the event of an adverse outcome, the ultimate potential loss could have a material adverse effect on our financial condition or results of operations and cash flows in a particular period.
 
ITEM 4.   RESERVED
 
PART II
 
ITEM 5.   MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
 
Historical Trading Price
 
Our common stock has been listed on the Nasdaq Global Select Market under the symbol “TTMI” since September 21, 2000. The following table sets forth the quarterly high and low sales prices of our common stock as reported on the Nasdaq Global Select Market for the periods indicated.
 
                 
    High     Low  
 
2010:
               
First Quarter
  $ 11.94     $ 8.25  
Second Quarter
  $ 12.06     $ 8.79  
Third Quarter
  $ 10.77     $ 8.04  
Fourth Quarter
  $ 15.69     $ 9.29  
2009:
               
First Quarter
  $ 6.70     $ 3.87  
Second Quarter
  $ 9.76     $ 5.40  
Third Quarter
  $ 11.99     $ 7.85  
Fourth Quarter
  $ 12.52     $ 9.78  
 
As of March 3, 2011, there were approximately 304 holders of record of our common stock. The closing sale price of our common stock on the Nasdaq Global Select Market on March 3, 2011 was $18.20.
 
Dividend Policy
 
We have not declared or paid any dividends since 2000, and we do not anticipate paying any cash dividends in the foreseeable future. We presently intend to retain any future earnings to finance future operations and the expansion of our business.


32


Table of Contents

STOCK PRICE PERFORMANCE GRAPH
 
The performance graph below compares, for the period from December 31, 2005, to December 31, 2010, the cumulative total stockholder return on our common stock against the cumulative total return of:
 
  •  the NASDAQ Composite Index;
 
  •  the Dow Jones U.S. Electrical Components & Equipment Index, and
 
  •  the remaining company in a peer group index previously used by us.
 
The graph assumes $100 was invested in our common stock on December 31, 2005, and an investment in each of the (i) NASDAQ Composite Index, (ii) the Dow Jones US Electrical Components & Equipment Index and (iii) the remaining company in a peer group index previously used by us, and the reinvestment of all dividends. We have added the Dow Jones U.S. Electrical Components & Equipment Index to the graph to capture the stock performance of companies whose products and services are more closely related to us. Our previous peer group index had consisted of two companies, Sanmina-SCI Corporation (Nasdaq NM: SANM) and Merix Corporation (Nasdaq NM: MERX). Merix merged with Viasystems on February 16, 2010 and, as a result, relevant information for Merix is no longer available. The peer group index now consists of only Sanmina Corporation. The performance of the previous peer group index is presented here for comparative purposes in accordance with Item 201(e) of Regulation S-K and will not be provided in the future.
 
COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*
Among TTM Technologies, Inc., The NASDAQ Composite Index
The Dow Jones US Electrical Components & Equipment Index
And A Peer Group
 
(PERFORMANCE GRAPH)
 
* $100 invested on 12/31/05 in stock or index, including reinvestment of dividends.
  Fiscal year ending December 31.
 
                                         
    12/06   12/07   12/08   12/09   12/10
 
TTM Technologies, Inc. 
    120.53       124.04       55.43       122.66       158.72  
NASDAQ Composite
    111.16       124.64       73.80       107.07       125.99  
Dow Jones US Electrical Components & Equipment
    112.77       135.19       68.96       112.00       144.08  
Peer Group
    80.99       42.72       11.03       43.15       44.91  
 
The performance graph above shall not be deemed “filed” for purposes of Section 18 of the Exchange Act, or otherwise subject to the liability of that section. The performance graph above will not be deemed incorporated by reference into any filing of our company under the Securities Act of 1933, as amended, or the Exchange Act.


33


Table of Contents

 
ITEM 6.   SELECTED FINANCIAL DATA
 
The selected historical financial data presented below are derived from our consolidated financial statements. The selected financial data should be read in conjunction with Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and our consolidated financial statements and the notes thereto included elsewhere in this report.
 
                                         
    Years Ended December 31,  
    2010(1)     2009(2)     2008(2)     2007     2006  
    (In thousands, except per share data)  
 
Consolidated Statement of Operations Data:
                                       
Net sales
  $ 1,179,671     $ 582,476     $ 680,981     $ 669,458     $ 369,316  
Cost of goods sold
    925,266       479,267       543,741       539,205       276,216  
                                         
Gross profit
    254,405       103,209       137,240       130,253       93,100  
                                         
Operating expenses:
                                       
Selling and marketing
    34,345       26,517       30,436       29,835       16,473  
General and administrative
    79,668       36,548       33,255       32,712       19,608  
Amortization of definite-lived intangibles
    13,678       3,440       3,799       4,126       1,786  
Restructuring charges
    389       5,490                   199  
Impairment of goodwill and long-lived assets
    766       12,761       123,322              
Metal reclamation
                (3,700 )            
                                         
Total operating expenses
    128,846       84,756       187,112       66,673       38,066  
                                         
Operating income (loss)
    125,559       18,453       (49,872 )     63,580       55,034  
Other income (expense):
                                       
Interest expense
    (22,255 )     (11,198 )     (11,065 )     (13,828 )     (3,394 )
Other, net
    5,333       868       (434 )     1,516       4,462  
                                         
Total other (expense) income, net
    (16,922 )     (10,330 )     (11,499 )     (12,312 )     1,068  
Income (loss) before income taxes
    108,637       8,123       (61,371 )     51,268       56,102  
Income tax (provision) benefit
    (28,738 )     (3,266 )     24,460       (16,585 )     (21,063 )
                                         
Net income (loss)
    79,899       4,857       (36,911 )     34,683       35,039  
Less: Net income attributable to the noncontrolling interest
    (8,368 )                        
                                         
Net income (loss) attributable to TTM Technologies, Inc. stockholders
  $ 71,531     $ 4,857     $ (36,911 )   $ 34,683     $ 35,039  
                                         
Earnings (loss) per common share attributable to TTM Technologies, Inc. stockholders:
                                       
Basic
  $ 1.02     $ 0.11     $ (0.86 )   $ 0.82     $ 0.84  
Diluted
  $ 1.01     $ 0.11     $ (0.86 )   $ 0.81     $ 0.83  
Weighted average common shares:
                                       
Basic
    70,220       43,080       42,681       42,242       41,740  
Diluted
    70,819       43,579       42,681       42,568       42,295  
Other Financial Data:
                                       
Depreciation of property, plant and equipment
  $ 48,747     $ 19,140     $ 21,324     $ 22,772     $ 12,178  
 
 
(1) Our results for the year ended December 31, 2010, include 267 days of activity of the PCB Subsidiaries, which we acquired on April 8, 2010.
 
(2) Effective January 1, 2009, we adopted new authoritative guidance for convertible debt instruments with retrospective application to the date of the issuance of convertible debt, which for us was May 2008. The implementation of the new authoritative guidance for convertible debt instruments increased interest expense by $2.6 million for the year ended December 31, 2008.


34


Table of Contents

                                         
    As of December 31,
    2010   2009   2008   2007   2006
    (In thousands)
 
Consolidated Balance Sheet Data:
                                       
Working capital
  $ 258,299     $ 323,112     $ 280,362     $ 98,839     $ 127,405  
Total assets
    1,761,952       543,058       540,240       498,798       573,698  
Convertible senior notes
    145,283       139,882       134,914              
Long-term debt, including current maturities
    380,118                   85,000       200,705  
TTM Technologies, Inc. stockholders’ equity
    728,255       340,917       330,036       328,594       287,315  
 
                                         
    Year Ended December 31,
    2010   2009   2008   2007   2006
    (In thousands)
 
Supplemental Data:
                                       
EBITDA(1)
  $ 193,434     $ 42,028     $ (25,065 )   $ 92,110     $ 73,577  
Net cash provided by operating activities
    125,819       73,977       75,632       73,984       32,784  
Net cash provided by (used in) investing activities
    32,956       (128,497 )     (21,281 )     (1,705 )     (234,579 )
Net cash (used in) provided by financing activities
    (35,368 )     440       74,793       (113,828 )     200,027  
 
 
(1) “EBITDA” means earnings before interest expense, income taxes, depreciation and amortization. We present EBITDA to enhance the understanding of our operating results. EBITDA is a key measure we use to evaluate our operations. We provide our EBITDA because we believe that investors and securities analysts will find EBITDA to be a useful measure for evaluating our operating performance and comparing our operating performance with that of similar companies that have different capital structures and for evaluating our ability to meet our future debt service, capital expenditures, and working capital requirements. However, EBITDA should not be considered as an alternative to cash flows from operating activities as a measure of liquidity or as an alternative to net income as a measure of operating results in accordance with accounting principles generally accepted in the United States. The following provides a reconciliation of EBITDA to the financial information in our consolidated statement of operations.
 
                                         
    Year Ended December 31,  
    2010     2009     2008     2007     2006  
    (In thousands)  
 
Net income (loss)
  $ 79,899     $ 4,857     $ (36,911 )   $ 34,683     $ 35,039  
                                         
Add back items:
                                       
Income tax provision (benefit)
    28,738       3,266       (24,460 )     16,585       21,063  
Interest expense
    22,255       11,198       11,065       13,828       3,394  
Depreciation of property, plant and equipment
    48,747       19,140       21,324       22,772       12,178  
Amortization of intangibles
    13,795       3,567       3,917       4,242       1,903  
                                         
Total
    113,535       37,171       11,846       57,427       38,538  
                                         
EBITDA
  $ 193,434     $ 42,028     $ (25,065 )   $ 92,110     $ 73,577  
                                         


35


Table of Contents

ITEM 7.   MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
 
This financial review presents our operating results for each of our three most recent fiscal years and our financial condition at December 31, 2010. Except for historical information contained herein, the following discussion contains forward-looking statements which are subject to known and unknown risks, uncertainties and other factors that may cause our actual results to differ materially from those expressed or implied by such forward-looking statements. We discuss such risks, uncertainties and other factors throughout this report and specifically under Item 1A of Part I of this report, Risk Factors. In addition, the following discussion should be read in connection with the information presented in our consolidated financial statements and the related notes to our consolidated financial statements.
 
OVERVIEW
 
We are a leading global provider of time-critical and technologically complex printed circuit board (PCB) products and backplane assemblies (PCBs populated with electronic components), which serve as the foundation of sophisticated electronic products. We provide our customers time-to-market and advanced technology products and offer a one-stop manufacturing solution to customers from engineering support to prototype development through final volume production. We serve a diversified customer base in various markets throughout the world, including manufacturers of networking/communications infrastructure products, personal computers, touch screen tablets and mobile media devices (cellular phones and smart phones). We also serve high-end computing, commercial aerospace/defense, and industrial/medical industries. Our customers include both original equipment manufacturers (OEMs) and electronic manufacturing services (EMS) providers.
 
In April 2010, we acquired from Meadville all of the issued and outstanding capital stock of four of its subsidiaries. These four companies and their respective subsidiaries, collectively referred to as the PCB Subsidiaries, comprised Meadville’s PCB manufacturing and distributing business. See Note 3 in our consolidated financial statements.
 
We believe that the combination of our legacy business and the PCB Subsidiaries will increase our diversification and allow us to better address a number of industry trends and other operational challenges impacting us:
 
  •  Ability to meet customer demand for a one-stop manufacturing solution.  As a result of the business combination, we are now a leading global PCB company with high-technology capabilities and a highly diversified revenue mix by geographic region and end market. In addition, we can now offer our customers a one-stop global manufacturing solution from quick-turn through volume production and a focused facility specialization strategy.
 
  •  Ability to respond to increasing global competition.  We now can capitalize on potential economies of scale, cost savings and access to a highly trained workforce, a global sales force, and flexible manufacturing platform; complementary footprints, customers and end markets; and talented management teams with leading expertise in the Asian market.
 
  •  Ability to continue expanding market presence and capitalizing on new opportunities.  We can now capture additional business globally from both existing and new customers, particularly in North America and Europe.
 
We believe that these factors position us to compete effectively in our industry by allowing us to respond to technologically complex and time-sensitive customer demands and increasing competition from other global manufacturers.
 
While our customers include both OEM and EMS providers, we measure customers based on OEM companies as they are the ultimate end customers. We measure customers as those companies that have placed orders of $2,000 or more in the preceding 12-month period. As of December 31, 2010, we had approximately 1,160 customers and as of December 31, 2009 we had approximately 850 customers. Sales to our 10 largest customers accounted for 42% and 56% of our net sales in 2010 and 2009, respectively. We sell to OEMs both directly and indirectly through EMS companies.


36


Table of Contents

The following table shows the percentage of our net sales attributable to each of the principal end markets we served for the periods indicated.
 
                         
End Markets(1)
  2010     2009     2008  
 
Aerospace/Defense
    20 %     44 %     37 %
Cellular Phone
    10              
Computing/Storage/Peripherals
    21       11       12  
Medical/Industrial/Instrumentation/Other
    9       8       10  
Networking/Communications
    35       36       40  
Other
    5       1       1  
                         
Total
    100 %     100 %     100 %
                         
 
 
(1) Sales to EMS companies are classified by the end markets of their OEM customers.
 
For PCBs, we measure the time sensitivity of our products by tracking the quick-turn percentage of our work. We define quick-turn orders as those with delivery times of 10 days or less, which typically captures research and development, prototype, and new product introduction work, in addition to unexpected short-term demand among our customers. Generally, we quote prices after we receive the design specifications and the time and volume requirements from our customers. Our quick-turn services command a premium price as compared to standard lead-time products.
 
We also deliver a significant percentage of compressed lead-time work with lead times of 11 to 20 days. We typically receive a premium price for this work as well. Purchase orders may be cancelled prior to shipment. We charge customers a fee, based on percentage completed, if an order is cancelled once it has entered production. We derive revenues primarily from the sale of PCBs and backplane assemblies using customer-supplied engineering and design plans. We recognize revenues when persuasive evidence of a sales arrangement exists, the sales terms are fixed and determinable, title and risk of loss have transferred, and collectibility is reasonably assured — generally when products are shipped to the customer. Net sales consist of gross sales less an allowance for returns, which typically has been less than 2% of gross sales. We provide our customers a limited right of return for defective PCBs and backplane assemblies. We record an estimated amount for sales returns and allowances at the time of sale based on historical information.
 
Cost of goods sold consists of materials, labor, outside services, and overhead expenses incurred in the manufacture and testing of our products as well as stock-based compensation expense. Many factors affect our gross margin, including capacity utilization, product mix, production volume, and yield. We generally do not participate in any significant long-term contracts with suppliers, with the exception of the supply arrangement to purchase laminate and prepregs from a related party controlled by a significant shareholder, and we believe there are a number of potential suppliers for the raw materials we use.
 
Selling and marketing expenses consist primarily of salaries and commissions paid to our internal sales force and independent sales representatives, salaries paid to our sales support staff, stock-based compensation expense as well as costs associated with marketing materials and trade shows. We generally pay higher commissions to our independent sales representatives for quick-turn work, which generally has a higher gross profit component than standard lead-time work.
 
General and administrative costs primarily include the salaries for executive, finance, accounting, information technology, facilities and human resources personnel, as well as insurance expenses, expenses for accounting and legal assistance, incentive compensation expense, stock-based compensation expense, bad debt expense, gains or losses on the sale or disposal of property, plant and equipment, and acquisition related expenses.


37


Table of Contents

CRITICAL ACCOUNTING POLICIES AND ESTIMATES
 
Our consolidated financial statements included in this report have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, net sales and expenses, and related disclosure of contingent assets and liabilities.
 
A critical accounting policy is defined as one that is both material to the presentation of our consolidated financial statements and requires management to make judgments that could have a material effect on our financial condition or results of operations. These policies require us to make assumptions about matters that are highly uncertain at the time of the estimate. Different estimates we could reasonably have used, or changes in the estimates that are reasonably likely to occur, would have a material effect on our financial condition or results of operations.
 
Management bases its estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Management has discussed the development, selection and disclosure of these estimates with the audit committee of our board of directors. Actual results may differ from these estimates under different assumptions or conditions.
 
Our critical accounting policies include asset valuation related to bad debts and inventory; sales returns and allowances; impairment of long-lived assets, including goodwill and intangible assets; derivative instruments and hedging activities; realizability of deferred tax assets; establishing the fair value of individual assets acquired, liabilities assumed, and noncontrolling interest when we acquire other businesses; and determining self-insured reserves.
 
Allowance for Doubtful Accounts
 
We provide customary credit terms to our customers and generally do not require collateral. We perform ongoing credit evaluations of the financial condition of our customers and maintain an allowance for doubtful accounts based upon historical collections experience and judgments as to expected collectibility of accounts. Our actual bad debts may differ from our estimates.
 
Inventories
 
In assessing the realization of inventories, we are required to make judgments as to future demand requirements and compare these with current and committed inventory levels. When the market value of inventory is less than the carrying value, the inventory cost is written down to their estimated net realizable value thereby establishing a new cost basis. Our inventory requirements may change based on our projected customer demand, market conditions, technological and product life cycle changes, longer or shorter than expected usage periods, and other factors that could affect the valuation of our inventories. We maintain certain finished goods inventories near certain key customer locations in accordance with agreements with those customers. Although this inventory is typically supported by valid purchase orders, should these customers ultimately not purchase these inventories, our results of operations and financial condition would be adversely affected.
 
Sales Returns and Allowances
 
We derive revenues primarily from the sale of printed circuit boards and backplane assemblies using customer-supplied engineering and design plans and recognize revenue upon delivery. We provide our customers a limited right of return for defective printed circuit boards and backplane assemblies. We accrue an estimated amount for sales returns and allowances at the time of sale using our judgment based on historical information and anticipated returns as a result of current period sales. To the extent actual experience varies from our historical experience, revisions to these allowances may be required.
 
Long-lived Assets
 
We have significant long-lived tangible and intangible assets consisting of property, plant and equipment, definite-lived intangibles, and goodwill. We review these assets for impairment whenever events or changes in circumstances indicate that the carrying amount of such assets may not be recoverable. In addition, we perform an impairment test related to goodwill at least annually. Our goodwill and intangibles are largely attributable to our


38


Table of Contents

acquisitions of other businesses. As necessary, we make judgments regarding future cash flow forecasts in the determination of impairment. We have two operating segments, North America and Asia Pacific.
 
During the fourth quarter of each year, and when events and circumstances warrant an evaluation, we perform our annual impairment assessment of goodwill, which requires the use of a fair-value based analysis. We determine the fair value of our reporting units based on discounted cash flows and market approach analyses as considered necessary and consider factors such as a weakened economy, reduced expectations for future cash flows coupled with a decline in the market price of our stock and market capitalization for a sustained period as indicators for potential goodwill impairment. If the reporting unit’s carrying amount exceeds its estimated fair value, a second step must be performed to measure the amount of the goodwill impairment loss, if any. The second step compares the implied fair value of the reporting unit’s goodwill, determined in the same manner as the amount of goodwill recognized in a business combination, with the carrying amount of such goodwill. If the carrying amount of the reporting unit’s goodwill exceeds the implied fair value of that goodwill, an impairment loss is recognized in an amount equal to that excess.
 
As of December 31, 2010, our assessment of goodwill impairment indicated that the fair value of goodwill for our North America segment was substantially in excess of its estimated carrying values, and therefore goodwill for the North America segment was not impaired. For our Asia Pacific segment, which consists of the PCB Subsidiaries acquired in April 2010, we did not assess for goodwill impairment as we recently finalized the assignment of estimated fair values to assets acquired, liabilities assumed and noncontrolling interests. Further, we did not find evidence of indicators for potential goodwill impairment, such as a weakened economy, reduced expectations for future cash flows, or a decline in the market price of our stock and market capitalization for a sustained period.
 
We also assess other long-lived assets, specifically definite-lived intangibles and property, plant and equipment, for potential impairment given similar impairment indicators. When indicators of impairment exist related to our long-lived tangible assets and definite-lived intangible assets, we use an estimate of the undiscounted net cash flows in measuring whether the carrying amount of the assets is recoverable. Measurement of the amount of impairment, if any, is based upon the difference between the asset’s carrying value and estimated fair value. Fair value is determined through various valuation techniques, including market and income approaches as considered necessary, which involve judgments related to future cash flows and the application of the appropriate valuation model.
 
If forecasts and assumptions used to support the realizability of our goodwill and other long-lived assets change in the future, significant impairment charges could result that would adversely affect our results of operations and financial condition.
 
Derivative Instruments and Hedging Activities
 
As a matter of policy, we use derivatives for risk management purposes, and we do not use derivatives for speculative purposes. Derivatives are typically entered into as hedges of changes in interest rates, currency exchange rates, and other risks.
 
When we determine to designate a derivative instrument as a cash flow hedge, we formally document the hedging relationship and its risk management objective and strategy for undertaking the hedge, the hedging instrument, the hedged item, the nature of the risk being hedged, how the hedging instrument’s effectiveness in offsetting the hedged risk will be assessed, and a description of the method of measuring ineffectiveness. We also formally assess, both at the hedge’s inception and on an ongoing basis, whether the derivative that is used in hedging transactions is highly effective in offsetting changes in cash flows of hedged items.
 
Derivative financial instruments are recognized as either assets or liabilities on the consolidated balance sheet with measurement at fair value. Fair value of the derivative instruments is determined using pricing models developed based on the underlying swap interest rate, foreign currency exchange rates, and other observable market data as appropriate. The values are also adjusted to reflect nonperformance risk of both the counterparty and the Company. For derivatives that are designated as a cash flow hedge, changes in the fair value of the derivative are recognized in accumulated other comprehensive income, to the extent the derivative is effective at offsetting the changes in cash flow being hedged until the hedged item affects earnings. To the extent there is any hedge ineffectiveness, changes in fair value relating to the ineffective portion are immediately recognized in earnings. Changes in the fair value of derivatives that are not designated as hedges are recorded in earnings each period.


39


Table of Contents

Income Taxes
 
Deferred income tax assets are reviewed for recoverability, and valuation allowances are provided, when necessary, to reduce deferred income tax assets to the amounts that are more likely than not to be realized based on our estimate of future taxable income. Should our expectations of taxable income change in future periods, it may be necessary to establish a valuation allowance, which could affect our results of operations in the period such a determination is made. We record income tax provision or benefit during interim periods at a rate that is based on expected results for the full year. If future changes in market conditions cause actual results for the year to be more or less favorable than those expected, adjustments to the effective income tax rate could be required.
 
In addition, we are subject to income taxes in the United States and foreign jurisdictions. Significant judgment is required in determining our worldwide provision for income taxes. In the ordinary course of our business, there are many transactions where the ultimate tax determination is uncertain. Additionally, our calculations of income taxes are based on our interpretations of applicable tax laws in the jurisdictions in which we file.
 
Business Combinations
 
We allocate the purchase price of acquired companies to the tangible and intangible assets acquired, liabilities assumed and noncontrolling interest, based on their estimated fair values. The excess of the purchase price over these fair values is recorded as goodwill. We engage independent third-party appraisal firms to assist us in determining the fair values of assets acquired, liabilities assumed, and noncontrolling interest. Such valuations require management to make significant estimates and assumptions, especially with respect to intangible assets.
 
The fair value of the real property was estimated primarily via the cost approach, and where applicable, the sales comparison approach and income approach. The procedures employed included site inspections, analysis of the subject properties, review of the highest and best use of the subject properties, discussions with onsite property management, determinations regarding future use of the facilities, review of real property market data available in the local market, estimation of replacement cost, new and typical expected useful lives, and the calculation of all factors of obsolescence.
 
For the fair value of the personal property we utilized the cost approach as the primary approach for valuing the majority of the personal property. The market approach was used to estimate the value of certain equipment commonly traded in the second hand marketplace, as well as computers and computer-related assets. The income approach was used to quantify any economic obsolescence that may be present in the subject assets. Our analysis also entailed an estimation of useful lives, which were researched and discussed with property management and market sources. The fair value measurement assumes the highest and best use of personal property assets by market participants.
 
The significant purchased intangible assets recorded by us include customer relationships, trade name, and order backlog. The fair values assigned to the identified intangible assets are discussed in Note 3 of the notes to the consolidated financial statements.
 
Critical estimates in valuing certain intangible assets include but are not limited to: future expected cash flows from customer relationships, estimating cash flows from existing backlog, market position of the trade name, as well as assumptions about cash flow savings from the trade name, and discount rates. Management’s estimates of fair value are based upon assumptions believed to be reasonable, but which are inherently uncertain and unpredictable and, as a result, actual results may differ from estimates.
 
Estimates associated with the accounting for acquisitions may change during the measurement period as additional information becomes available regarding the assets acquired, liabilities assumed, and noncontrolling interest as discussed in Note 3 of the notes to consolidated financial statements.
 
Self Insurance
 
We are primarily self-insured in North America for group health insurance and worker’s compensation benefits provided to our U.S. employees, and we purchase insurance to protect against annual claims at the individual and aggregate level. We estimate our exposure for claims incurred but not reported at the end of each reporting period. We use our judgment using our historical claim data and information and analysis provided by actuarial and claim


40


Table of Contents

advisors, our insurance carriers and brokers on an annual basis to estimate our liability for these claims. This liability is subject to individual insured stop-loss coverage for both programs which is $250,000 per individual. Our actual claims experience may differ from our estimates.
 
RESULTS OF OPERATIONS
 
The years ended December 31, 2009 and 2008 do not include the results of operations from our acquired PCB Subsidiaries, as the acquisition occurred on April 8, 2010. The acquisition has had and will continue to have a significant effect on our operations as discussed in the various comparisons noted below.
 
Included in the consolidated statement of operations for the year ended December 31, 2010 are 267 days of results of operations for the Asia Pacific operations for the period from April 9, 2010 through December 31, 2010. The following table sets forth the relationship of various items to net sales in our consolidated statement of operations:
 
                         
    Year Ended December 31,  
    2010     2009     2008  
 
Net sales
    100.0 %     100.0 %     100.0 %
Cost of goods sold
    78.4       82.3       79.8  
                         
Gross profit
    21.6       17.7       20.2  
                         
Operating expenses:
                       
Selling and marketing
    2.9       4.6       4.5  
General and administrative
    6.8       6.3       4.9  
Amortization of definite-lived intangibles
    1.2       0.5       0.6  
Restructuring charges
          0.9        
Impairment of goodwill and long-lived assets
    0.1       2.2       18.1  
Metal reclamation
                (0.6 )
                         
Total operating expenses
    11.0       14.5       27.5  
                         
Operating income (loss)
    10.6       3.2       (7.3 )
Other income (expense):
                       
Interest expense
    (1.9 )     (1.9 )     (1.6 )
Other, net
    0.5       0.1       (0.1 )
                         
Total other expense, net
    (1.4 )     (1.8 )     (1.7 )
                         
Income (loss) before income taxes
    9.2       1.4       (9.0 )
Income tax (provision) benefit
    (2.4 )     (0.6 )     3.6  
                         
Net income (loss)
    6.8       0.8       (5.4 )
Less: Net income attributable to noncontrolling interest
    (0.7 )            
                         
Net income (loss) attributable to TTM Technologies, Inc. stockholders
    6.1 %     0.8 %     (5.4 )%
                         
 
Prior to our acquisition of the PCB Subsidiaries, we had two operating segments, PCB Manufacturing and Backplane Assembly, consistent with the nature of our operations. Due to the acquisition, we reassessed our operating segments and now manage our worldwide operations based on two geographic operating segments: (1) North America, which consists of seven domestic PCB fabrication plants, including a facility that provides follow-on value-added services primarily for one of the PCB fabrication plants, and one backplane assembly plant in Shanghai, China, which is managed in conjunction with our U.S. operations and its related European sales support infrastructure; and (2) Asia Pacific, which consists of the PCB Subsidiaries and their seven PCB fabrication plants, which include a substrate facility. Each segment operates predominantly in the same industry with production facilities that produce similar customized products for our customers and use similar means of product distribution in their respective geographic regions.


41


Table of Contents

The following table compares net sales by reportable segment for the years ended December 31, 2010, 2009 and 2008:
 
                         
    Year Ended December 31,  
    2010     2009     2008  
    (In thousands)  
 
Net Sales:
                       
North America
  $ 581,828     $ 582,476     $ 680,981  
Asia Pacific
    604,748              
                         
Total sales
    1,186,576       582,476       680,981  
Inter-segment sales
    (6,905 )            
                         
Total net sales
  $ 1,179,671     $ 582,476     $ 680,981  
                         
 
Net Sales
 
Total net sales increased $597.2 million, from $582.5 million for the year ended December 31, 2009 to $1,179.7 million for the year ended December 31, 2010 due to our acquisition of the PCB Subsidiaries in April 2010, which comprise our Asia Pacific segment.
 
Net sales for the North America segment remained consistent with net sales of $582.5 million for the year ended December 31, 2009 and net sales of $581.8 million for the year ended December 31, 2010. Sales volume at a number of our facilities increased due to the improving economy and the transfer of work from our closed facilities partially offset by the lost revenue resulting from the closure of our Los Angeles, California facility in November 2009, and our Hayward, California facility in March 2010. The revenue reflects a decrease of 2% in our average PCB selling price from the year ended December 31, 2009 as compared to the year ended December 31, 2010 and an increase in PCB volume of 7% from the year ended December 31, 2009 as compared to December 31, 2010 due to the improving economy.
 
Total net sales, all of which were attributable to our North America segment, decreased $98.5 million, or 14.5%, from $681.0 million for the year ended December 31, 2008 to $582.5 million for the year ended December 31, 2009 primarily due to reduced demand at most of our production facilities resulting from a downturn in the global economy and due to the shutdown of our Redmond, Washington production facility at the end of March 2009 and our Los Angeles, California facility at the end of November 2009. These manufacturing facilities were closed as part of our strategy to concentrate our production at fewer facilities during a period of industry-wide reduced demand. PCB volume declined approximately 23% due to reduced demand while prices rose approximately 9% due to a shift in production mix toward more high-technology production. Our quick-turn production, which we measure as orders placed and shipped within 10 days, decreased from approximately 12% of PCB sales for the year ended December 31, 2008 to approximately 11% of PCB sales for the year ended December 31, 2009. The increasingly complex nature of our quick-turn work requires more time to manufacture, thereby extending some of these orders beyond the 10-day delivery window. The decrease in revenue is also attributable to reduced volume at our Hayward, California production facility in conjunction with the closure announced on September 1, 2009. This backplane assembly facility was closed in 2010 due to a steady decline in volume over several years.
 
Cost of Goods Sold
 
Cost of goods sold increased $446.0 million from $479.3 million for the year ended December 31, 2009 to $925.3 million for the year ended December 31, 2010 primarily due to our acquisition of the PCB Subsidiaries in April 2010, which comprise our Asia Pacific segment.
 
Cost of goods sold for the North America segment decreased $17.4 million, or 3.6%, from $479.3 million for the year ended December 31, 2009 to $461.9 million for the year ended December 31, 2010 due primarily to increased production volume partially offset by reduced overhead from the facility closures discussed above, as well as lower direct material costs due to lower volumes of backplane assemblies, which inherently have a higher material content. As a percentage of net sales, cost of goods sold decreased from 82.3% for the year ended


42


Table of Contents

December 31, 2009 to 79.4% for the year ended December 31, 2010, primarily due to cost savings from our closed facilities and increased absorption of fixed costs across a smaller plant footprint following the closure of our Los Angeles and Hayward, California facilities.
 
Cost of goods sold, all of which were attributable to our North America segment, decreased $64.4 million, or 11.8%, from $543.7 million for the year ended December 31, 2008 to $479.3 million for the year ended December 31, 2009 due primarily to the decline in PCB volume discussed above. The decrease in cost of goods sold was mostly driven by lower labor and direct material costs associated with lower production volume. As a percentage of net sales, cost of goods sold increased from 79.8% for the year ended December 31, 2008 to 82.3% for the year ended December 31, 2009, primarily due to reduced absorption of fixed costs on lower volume and inventory write-off costs related to the closure of our Redmond, Washington and Los Angeles, California facility and the closure of our Hayward, California facility.
 
Gross Profit
 
As a result of the foregoing, gross profit increased $151.2 million from $103.2 million for the year ended December 31, 2009 to $254.4 million for the year ended December 31, 2010, primarily due to our acquisition of the PCB Subsidiaries. Overall gross margin increased from 17.7% for the year ended December 31, 2009 to 21.6% for the year ended December 31, 2010 due primarily to higher overall profit margins for the Asia Pacific segment, which in turn are primarily attributable to that segment’s sale of HDI PCBs and other product mix variations, partially offset by $6.7 million of increased costs in the Asia Pacific segment due to the fair value mark up of acquired PCB Subsidiaries inventory. Overall gross margin also increased due to cost savings from our closed facilities and higher fixed cost absorption on higher volumes in our North America segment.
 
Gross profit, all of which was attributable to our North America segment, decreased $34.0 million, or 24.8%, from $137.2 million for the year ended December 31, 2008 to $103.2 million for the year ended December 31, 2009. Our gross margin decreased from 20.2% for the year ended December 31, 2008 to 17.7% for the year ended December 31, 2009. The decrease in our gross margin was due to lower fixed cost absorption and inventory write-off costs related to the closure of our Redmond, Washington, and Los Angeles, California facilities and the pending closure of our Hayward, California facility. While there was a shift in production mix towards more high technology production and higher pricing in 2009, reduced volume across our remaining manufacturing facilities more than offset the benefit of higher pricing and contributed to a lower gross margin.
 
Selling and Marketing Expenses
 
Selling and marketing expenses increased $7.8 million, or 29.4%, from $26.5 million for the year ended December 31, 2009 to $34.3 million for the year ended December 31, 2010 due to our acquisition of the PCB Subsidiaries. As a percentage of net sales, selling and marketing expenses were 4.6% for the year ended December 31, 2009 as compared to 2.9% for the year ended December 31, 2010. The decline in selling and marketing expense as a percentage of net sales is due to our acquisition of the PCB Subsidiaries, which have lower selling labor and commission expense than our North America segment.
 
Selling and marketing expenses decreased $3.9 million, or 12.8%, from $30.4 million for the year ended December 31, 2008 to $26.5 million for the year ended December 31, 2009. The decrease in selling and marketing expense was primarily a result of lower selling labor and commission expenses due to lower net sales and reduced costs as a result of the closure of our Redmond, Washington facility. As a percentage of net sales, selling and marketing expenses were 4.6% for the year ended December 31, 2009 as compared to 4.5% for the year ended December 31, 2008.
 
General and Administrative Expense
 
General and administrative expenses increased $43.2 million from $36.5 million, or 6.3% of net sales, for the year ended December 31, 2009 to $79.7 million, or 6.8% of net sales, for the year ended December 31, 2010. The increase in expense primarily relates to our acquisition of the PCB Subsidiaries in April 2010 as well as an increase in transaction-related costs of $3.8 million from $5.4 million for the year ended December 31, 2009 to $9.2 million for the year ended December 31, 2010.


43


Table of Contents

General and administrative expenses increased $3.2 million from $33.3 million, or 4.9% of net sales, for the year ended December 31, 2008 to $36.5 million, or 6.3% of net sales, for the year ended December 31, 2009. The increase in expense for the year ended December 31, 2009 primarily relates to $5.4 million in transaction-related costs, partially offset by lower incentive bonus expense.
 
Amortization of Definite-Lived Intangibles
 
Intangible amortization expense increased $10.3 million from $3.4 million, or 0.5% of net sales, for the year ended December 31, 2009 to $13.7 million, or 1.2% of net sales, for the year ended December 31, 2010. The increase was due to our acquisition of the PCB Subsidiaries. Acquired identifiable intangible assets include customer relationships, trade name and order backlog.
 
Intangible amortization expense decreased $0.4 million from $3.8 million, or 0.5% of net sales, for the year ended December 31, 2008 to $3.4 million, or 0.6% of net sales, for the year ended December 31, 2009. The amortization expense primarily relates to the strategic customer relationship intangibles acquired in the PCG acquisition in October 2006.
 
Restructuring Charges
 
Restructuring charges recorded for the year ended December 31, 2010 are primarily related to contract termination costs related to building operating leases associated with the closure of our Hayward, California facility.
 
Restructuring charges recorded for the year ended December 31, 2009 of $5.5 million are related to separation and contract termination costs. The separation costs in the amount of $5.0 million are associated with the lay off of approximately 850 employees, of which 710 employees are associated with the closure of the Redmond, Washington and Hayward and Los Angeles, California production facilities, and 140 employees are related to various other U.S. facilities during 2009. The contract termination costs of $0.5 million are related to building operating leases associated with the closure of our Los Angeles, California manufacturing facility.
 
Impairment of Goodwill and Long-Lived Assets
 
Impairment of long-lived assets of $0.8 million for the year ended December 31, 2010 related to the further reduction in the value of the Dallas, Oregon facility to record the estimated fair value less cost to sell given the then current market conditions. We sold this facility in July 2010.
 
Impairment of long-lived assets for the year ended December 31, 2009 in the amount of $8.4 million was related to the closure of the Redmond, Washington and Los Angeles, California production facilities, and the then pending closure of our Hayward, California facility, and consists of machinery and equipment. Additionally, during the year ended December 31, 2009 we reduced the value of the Redmond, Washington and Dallas, Oregon buildings, which were classified as assets held for sale, by $4.4 million to record the estimated fair value less costs to sell given current market conditions.
 
For the year ended December 31, 2008 we recorded an impairment of long-lived assets, including assets held for sale, of $6.3 million related to our Dallas, Oregon; Redmond, Washington; and Hayward, California production facilities. Our Dallas, Oregon facility, which was held for sale, was reduced to $3.2 million in consideration of real estate market conditions, which represented its then current estimate of fair value less costs to sell. Additionally, we determined that certain long-lived assets, consisting of machinery and equipment, were impaired due to slower growth and lower future production expectations for Hayward, California and the January 15, 2009 announcement of our plans to close the Redmond, Washington production facility.
 
The Redmond, Washington and Hayward and Los Angeles, California production facilities were part of our current North America operating segment.
 
Additionally, during the fourth quarter of 2008, we recorded goodwill impairment charges of $117.0 million. As a result of our annual goodwill impairment testing, and giving consideration to factors such as a weakening economy, reduced expectation for future cash flows coupled with the decline in the market price of our stock and


44


Table of Contents

market capitalization for a sustained period as indicators for potential goodwill impairment, we determined that the carrying value of our PCB manufacturing segment’s goodwill exceeded its implied fair value, resulting in an impairment charge.
 
Metal Reclamation
 
During 2008, we recognized $3.7 million of income related to a pricing reconciliation of metal reclamation activity attributable to a single vendor. As a result of the pricing reconciliation, we discovered that the vendor had inaccurately compensated us for gold reclamation over the last several years. While pricing reconciliations of this nature occur periodically, we do not expect to recognize a similar amount in future periods.
 
Other Income (Expense)
 
Other expense, net increased $6.6 million from $10.3 million for the year ended December 31, 2009 to $16.9 million for the year ended December 31, 2010. The increase in other expense, net was primarily due to interest expense related to the debt assumed at the date of acquisition of the PCB Subsidiaries, as well as increased amortization of costs related to the issuance of this debt. For the year ended December 31, 2010, the increase in interest expense was partially offset by foreign currency transaction gains.
 
Other expense, net decreased $1.2 million from $11.5 million for the year ended December 31, 2008 to $10.3 million for the year ended December 31, 2009. The overall net decrease consists of a $0.1 million increase in interest expense, offset by a $1.3 million decrease in other, net. In connection with the full repayment of our credit facility in 2008, we realized a loss on the settlement of a derivative of $1.2 million, which was recognized as other, net.
 
Income Taxes
 
The provision for income taxes increased $25.4 million from $3.3 million for the year ended December 31, 2009 to $28.7 million for the year ended December 31, 2010 primarily due to higher pre-tax income. Our effective tax rate was 26.5% for the year ended December 31, 2010 and 40.2% for the year ended December 31, 2009. Our effective tax rate decreased in 2010 primarily due to the acquisition of the PCB Subsidiaries, which have a lower effective tax rate than our North America operations, partially offset by the impact of the non-deductibility of certain transaction costs. Additionally, certain foreign losses generated are not more than likely to be realizable, and thus no income tax benefit has been recognized on these losses. Our effective tax rate is primarily impacted by the U.S. federal income tax rate, apportioned state income tax rates, tax rates in China and Hong Kong, generation of other credits and deductions available to us, and certain non-deductible items. Additionally, as of December 31, 2010, we had net deferred income tax assets of approximately $18.3 million. Based on our forecast for future taxable earnings, we believe it is more likely than not that we will utilize the deferred income tax asset in future periods.
 
The provision for income taxes increased $27.8 million from a $24.5 million tax benefit for the year ended December 31, 2008 to a $3.3 million tax provision for the year ended December 31, 2009. Our effective tax rate was 40.2% in 2009 and 39.9% for 2008. The increase in the provision from 2008 was primarily due to the increase in pretax income from a loss in 2008.
 
Liquidity and Capital Resources
 
Our principal sources of liquidity have been cash provided by operations, the issuance of Convertible Notes and, more recently, the issuance of term and revolving debt. Our principal uses of cash have been to meet debt service requirements, finance capital expenditures, fund working capital requirements and finance acquisitions. We anticipate that servicing debt, funding working capital requirements, financing capital expenditures, and acquisitions will continue to be the principal demands on our cash in the future.
 
As of December 31, 2010, we had net working capital of approximately $258.3 million compared to $323.1 million as of December 31, 2009. This decrease in working capital is primarily attributable to our use of approximately $114.0 million of the $120.0 million of restricted cash and the incurrence of debt (including


45


Table of Contents

current maturities) in connection with our April 2010 acquisition of the PCB Subsidiaries, partially offset by the increases in receivables and inventories resulting from that acquisition.
 
Our 2011 capital expenditure plan is expected to total approximately $136.0 million (of which approximately $115.0 million relates to our Asia Pacific segment), and will fund capital equipment purchases to increase production capacity, expand our technological capabilities and replace aging equipment.
 
Based on our current level of operations, we believe that cash generated from operations, cash on hand and available borrowings under our existing credit arrangements will be adequate to meet our currently anticipated debt service, capital expenditures, acquisition, and working capital needs for the next 12 months and beyond. The semiannual repayments on our existing term loan increase as the debt nears maturity in 2013. Should we choose to maintain a significant level of annual capital expenditures or to pursue an acquisition in the next few years, refinancing of our existing debt may be necessary. In the event we determine to engage in significant acquisition or debt refinancing transactions, the adequacy of our liquidity will depend on our ability to achieve an appropriate combination of financing from third parties and access to capital markets. We cannot give any assurances that we will be able to obtain additional financing or otherwise access the capital markets in the future on acceptable terms or at all.
 
Credit Agreement
 
On April 9, 2010, in conjunction with the acquisition of the PCB Subsidiaries, the Company became a party to a credit agreement (Credit Agreement), entered into on November 16, 2009 by certain PCB Subsidiaries, which are now our wholly owned foreign subsidiaries. The Credit Agreement was put in place in contemplation of the acquisition in order to refinance the then-existing credit facilities of the PCB Subsidiaries.
 
The Credit Agreement consists of a $350.0 million senior secured Term Loan, a $87.5 million senior secured Revolving Loan, a $65.0 million Factoring Facility, and a $80.0 million Letters of Credit Facility, all of which mature on November 16, 2013. The Credit Agreement is secured by substantially all of the assets of the PCB Subsidiaries and is senior to all other of our debt including the Convertible Senior Notes. The Company has fully and unconditionally guaranteed the full and punctual payment of all obligations of the PCB Subsidiaries under the Credit Agreement.
 
Borrowings under the Credit Agreement bear interest at a floating rate of LIBOR (term election by Company) plus an applicable interest margin. Borrowings bear interest at a rate of LIBOR plus 2.0% under the Term Loan, LIBOR plus 2.25% under the Revolving Loan, and LIBOR plus 1.25% under the Factoring Facility. At December 31, 2010, the weighted average interest rate on the outstanding borrowings was 2.26%.
 
Borrowings under the Credit Agreement are subject to certain financial and operating covenants that include maintaining maximum total leverage ratios and minimum net worth, current assets, and interest coverage ratios at both the Company and PCB Subsidiaries level. On August 3, 2010, we entered into a waiver and amendment letter with The Hongkong and Shanghai Banking Corporation Limited, as Facility Agent for and on behalf of the other lenders named in the Credit Agreement, amending the financial covenants related to consolidated tangible net worth, gearing ratio (the ratio of consolidated net borrowings to consolidated tangible net worth), and leverage. At December 31, 2010, we were in compliance with the amended covenants.
 
We are required to pay a commitment fee of 0.20% per annum on any unused portion of loan or facility under the Credit Agreement. For the year ended December 31, 2010, we incurred $0.3 million in commitment fees related to unused portion loan or facility under the Credit Agreement. As of December 31, 2010, all of the Term Loan and $61.6 million of Letters of Credit were outstanding, and available borrowing capacity under the Revolving Loan and Factoring Facility was $87.5 million and $65.0 million, respectively.
 
Bank Loans
 
Bank loans are made up of bank lines of credit in mainland China and are used for working capital and capital investment for our mainland China facilities. These facilities are denominated in either U.S. Dollars or Chinese Renminbi (RMB), with interest rates tied to either the LIBOR or People’s Bank of China rates with a small margin adjustment. These bank loans expire at various dates through May 2012.


46


Table of Contents

Convertible Notes
 
In May 2008, we issued $175.0 million of Convertible Notes. The Convertible Notes bear interest at a rate of 3.25% per annum. Interest is payable semiannually in arrears on May 15 and November 15 of each year. The Convertible Notes are senior unsecured obligations and rank equally to our future unsecured senior indebtedness and senior in right of payment to any of our future subordinated indebtedness. We received proceeds of $169.2 million after the deduction of offering expenses of $5.8 million. These offering expenses are being amortized to interest expense over the term of the Convertible Notes.
 
At any time prior to November 15, 2014, holders may convert their Convertible Notes into cash and, if applicable, into shares of our common stock based on a conversion rate of 62.6449 shares of our common stock per $1,000 principal amount of Convertible Notes, subject to adjustment, under the following circumstances: (1) during any calendar quarter beginning after June 30, 2008 (and only during such calendar quarter), if the last reported sale price of our common stock for at least 20 trading days during the 30 consecutive trading days ending on the last trading day of the immediately preceding calendar quarter is greater than or equal to 130% of the applicable conversion price on each applicable trading day of such preceding calendar quarter; (2) during the five business day period after any 10 consecutive trading day period in which the trading price per note for each day of that 10 consecutive trading day period is less than 98% of the product of the last reported sale price of our common stock and the conversion rate on such day; or (3) upon the occurrence of specified corporate transactions described in the prospectus supplement related to the Convertible Notes, which can be found on the SEC’s website at www.sec.gov. As of December 31, 2010, none of the conversion criteria had been met.
 
On or after November 15, 2014 until the close of business on the third scheduled trading day preceding the May 15, 2015 maturity of the Convertible Notes, holders may convert their notes at any time, regardless of the foregoing circumstances. Upon conversion, for each $1,000 principal amount of notes, we will pay cash for the lesser of the conversion value or $1,000 and shares of our common stock, if any, based on a daily conversion value calculated on a proportionate basis for each day of the applicable 60 trading day observation period.
 
The maximum number of shares issuable upon conversion, subject to certain conversion rate adjustments, would be approximately 14 million shares.
 
We are not permitted to redeem the notes at any time prior to maturity. In the event of a fundamental change or certain default events, as defined in the prospectus supplement, holders may require us to repurchase for cash all or a portion of their notes at a price equal to 100% of the principal amount, plus any accrued and unpaid interest.
 
In connection with the issuance of the Convertible Notes, we entered into a convertible note hedge and warrant transaction (Call Spread Transaction), with respect to our common stock. The convertible note hedge, which cost an aggregate of $38.3 million and was recorded, net of tax, as a reduction of additional paid-in capital, consists of our option to purchase up to 11.0 million shares of common stock at a price of $15.96 per share. This option expires on May 15, 2015 and can only be executed upon the conversion of the Convertible Notes. Additionally, we sold warrants for the option to purchase 11.0 million shares of our common stock at a price of $18.15 per share. The warrants expire ratably beginning August 2015 through February 2016. The proceeds from the sale of warrants of $26.2 million was recorded as an addition to additional paid-in capital. The Call Spread Transaction has no effect on the terms of the Convertible Notes and reduces potential dilution by effectively increasing the conversion price of the Convertible Notes to $18.15 per share of our common stock.
 
Other Letters of Credit
 
In addition to the letters of credit obtained by the PCB Subsidiaries pursuant to the Credit Agreement, we maintain several letters of credit: a $2.0 million standby letter of credit expiring December 31, 2011 associated with insured workers compensation program; a $1.0 million standby letter of credit expiring February 29, 2012 related to the lease for one of our production facilities; and various other letters of credits aggregating to approximately $0.4 million related to purchases of machinery and equipment with various expiration dates through June 2011.


47


Table of Contents

Contractual Obligations and Commitments
 
The following table provides information on our contractual obligations as of December 31, 2010:
 
                                         
          Less Than
                After
 
Contractual Obligations(1)(2)
  Total     1 Year     1 - 3 Years     4 - 5 Years     5 Years  
    (In thousands)  
 
Long-term debt obligations
  $ 380,432     $ 67,123     $ 313,301     $ 8     $  
Convertible debt obligations
    175,000                   175,000        
Interest on debt obligations
    41,614       13,490       19,593       8,531        
Interest rate swap liabilities
    6,487       3,045       3,442              
Foreign currency forward contract liabilities
    277       5       272              
Equipment payables
    72,754       59,802       12,952              
Related party financing obligation(3)
    20,399             20,399              
Purchase obligations
    70,927       34,776       36,151              
Operating lease commitments
    4,215       1,634       1,121       463       997  
                                         
Total contractual obligations
  $ 772,105     $ 179,875     $ 407,231     $ 184,002     $ 997  
                                         
 
 
(1) Unrecognized uncertain tax benefits of $0.1 million are not included in the table above as we are not sure when the amount will be paid.
 
(2) Estimated environmental liabilities of $0.6 million, not included in the table above, are accrued and recorded as liabilities in our consolidated December 31, 2010 balance sheet.
 
(3) Related party financing obligation consists of a put and call option agreement in which we granted a put option to a related party to sell and they granted us a call option to purchase the remaining 20% equity interest in a recently acquired PCB subsidiary beginning in 2013. We expect the option to be exercised in 2013.
 
Off Balance Sheet Arrangements
 
We do not currently have, nor have we ever had, any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. In addition, we do not engage in trading activities involving non-exchange traded contracts. As a result, we are not materially exposed to any financing, liquidity, market, or credit risk that could arise if we had engaged in these relationships.
 
Seasonality
 
As a result of the product and customer mix of our Asia Pacific operating segment, a portion of our revenue will be subject to seasonal fluctuations going forward. These fluctuations include seasonal patterns in the computer and cellular phone industry, which together have become a significant portion of the end markets that we serve. This seasonality typically results in higher net sales in the third quarter due to end customer demand for fourth quarter sales of consumer electronics products. Seasonal fluctuations also include the Chinese New Year holiday in the first quarter, which typically results in lower net sales.
 
Impact of Inflation
 
We believe that our results of operations are not materially impacted by moderate changes in the inflation rate as we expect that we generally will be able to continue to pass along component price increases to our customers. Severe increases in inflation, however, could affect the global and U.S. economies and have an adverse impact on our business, financial condition and results of operations.


48


Table of Contents

Recently Issued Accounting Standards
 
In January 2010, the FASB issued ASU 2010-06, Fair Value Measurements and Disclosures (Topic 820): Improving Disclosures about Fair Value Measurements, which will require companies to make new disclosures about recurring or nonrecurring fair value measurements including significant transfers into and out of Level 1 and Level 2 fair value hierarchies and information on purchases, sales, issuance and settlements on a gross basis in the reconciliation of Level 3 fair value measurements. The ASU is effective prospectively for financial statements issued for fiscal years and interim periods beginning after December 15, 2009, except for the new disclosures about purchases, sales, issuance and settlements on a gross basis in the reconciliation of Level 3 fair value measurements is effective for interim and annual reporting periods beginning after December 15, 2010. The adoption of ASU 2010-06 is not expected to have a material impact on our consolidated financial statements.
 
ITEM 7A.   QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
 
In the normal course of business operations we are exposed to risks associated with fluctuations in interest rates and foreign currency exchange rates. We address these risks through controlled risk management that includes the use of derivative financial instruments to economically hedge or reduce these exposures. We do not enter into derivative financial instruments for trading or speculative purposes.
 
We have not experienced any losses to date on any derivative financial instruments due to counterparty credit risk.
 
To ensure the adequacy and effectiveness of our interest rate and foreign exchange hedge positions, we continually monitor our interest rate swap positions and foreign exchange forward positions, both on a stand-alone basis and in conjunction with their underlying interest rate and foreign currency exposures, from an accounting and economic perspective. However, given the inherent limitations of forecasting and the anticipatory nature of the exposures intended to be hedged, we cannot assure that such programs will offset more than a portion of the adverse financial impact resulting from unfavorable movements in either interest or foreign exchange rates. In addition, the timing of the accounting for recognition of gains and losses related to mark-to-market instruments for any given period may not coincide with the timing of gains and losses related to the underlying economic exposures and, therefore, may adversely affect our consolidated operating results and financial position.
 
Interest rate risk
 
Our business is exposed to interest rate risk resulting from fluctuations in interest rates. Our interest expense is more sensitive to fluctuations in the general level of LIBOR and the People’s Bank of China interest rates than to changes in rates in other markets. Increases in interest rates would increase interest expenses relating to the outstanding variable rate borrowings of certain foreign subsidiaries and increase the cost of debt. Fluctuations in interest rates can also lead to significant fluctuations in the fair value of the debt obligations.
 
On April 9, 2010, we entered into a two-year pay-fixed, receive floating (1-month LIBOR), amortizing interest rate swap arrangement with an initial notional amount of $146.5 million, for the period beginning April 18, 2011 and ending on April 16, 2013. The interest rate swap will apply a fixed interest rate against the first interest payments of a portion of the $350.0 million Term Loan for this period. The notional amount of the interest rate swap decreases to zero over its term, consistent with our risk management objectives. The notional value underlying the hedge at December 31, 2010 was $146.5 million. Under the terms of the interest rate swap, the Company will pay a fixed rate of 2.50% and will receive floating 1-month LIBOR during the swap period.
 
To the extent the instruments are considered to be effective, changes in fair value are recorded as a component of accumulated other comprehensive income. To the extent there is any hedge ineffectiveness, changes in fair value relating to the ineffective portion are immediately recognized in earnings as interest expense. No ineffectiveness was recognized for the year ended December 31, 2010. At inception, the fair value of the interest rate swap was zero. As of December 31, 2010, the fair value of the swap was recorded as a liability of $3.4 million in other long-term liabilities. The change in the fair value of the interest rate swap is recorded as a component of accumulated other comprehensive income, net of tax, in our consolidated balance sheet. There was no impact to interest expense for the


49


Table of Contents

year ended December 31, 2010 as the interest rate swap does not hedge interest rate cash flows until the period beginning April 18, 2011. We have designated this interest rate swap as a cash flow hedge.
 
We also, through our acquisition of the PCB Subsidiaries, assumed a long term pay-fixed, receive floating (1-month LIBOR), amortizing interest rate swap arrangement with an initial notional amount of $40.0 million, for the period beginning October 8, 2008 and ending on July 30, 2012. The notional amount of the interest rate swap amortizes to zero over its term, consistent with our risk management objectives. The notional value underlying the hedge at December 31, 2010 was $40.0 million. Under the terms of the interest rate swap, we will pay a fixed rate of 3.43% and will receive floating 1-month LIBOR during the swap period. As the borrowings attributable to this interest rate swap were paid off upon acquisition, we did not designate this interest rate swap as a cash flow hedge. As of December 31, 2010, the fair value of the swap was recorded as a liability of $1.2 million in other long-term liabilities. The change in fair value of this interest rate swap is recorded as other, net in the consolidated statement of operations.
 
As of December 31, 2010, approximately 39% of our long term debt was based on fixed rates, including notional amounts related to interest rate swaps. Based on our borrowings as of December 31, 2010, an assumed 1% change in variable rates would cause our annual interest cost to change by $3.4 million.
 
Foreign currency risks
 
We are subject to risks associated with transactions that are denominated in currencies other than our functional currencies, as well as the effects of translating amounts denominated in a foreign currency to the U.S. Dollar as a normal part of the reporting process. Our Asia Pacific operations utilize the Chinese Renminbi or RMB, and the Hong Kong Dollar or HKD, as the functional currency, which results in the Company recording a translation adjustment that is included as a component of accumulated other comprehensive income. The Company does not generally engage in hedging to manage foreign currency risk related to its revenue and expenses denominated in RMB and HKD.
 
We enter into foreign currency forward contracts to mitigate the impact of changes in foreign currency exchange rates and to reduce the volatility of purchases and other obligations generated in currencies other than the functional currencies. Our foreign subsidiaries may at times purchase forward exchange contracts to manage their foreign currency risk in relation to particular purchases or obligations, such as the related party financing obligation arising from the put call option to purchase the remaining 20% of a majority owned subsidiary in 2013, and certain purchases of machinery denominated in foreign currencies other than our foreign functional currency. The notional amount of the foreign exchange contracts at December 31, 2010 was approximately $36.3 million. We did not have any foreign exchange contracts as of December 31, 2009. We have designated certain of these foreign exchange contracts as cash flow hedges, with the exception of the foreign exchange contracts in relation to the related party financing obligation. In this instance, the hedged item is a recognized liability subject to foreign currency transaction gains and losses and therefore, changes in the hedged item due to foreign currency exchange rates are already recorded in earnings. Therefore, hedge accounting has not been applied.


50


Table of Contents

The table below presents information about certain of the foreign currency forward contracts at December 31, 2010:
 
                 
    As of December 31, 2010  
          Average Contract
 
    Notional
    Rate or Strike
 
    Amount     Amount  
    (In thousands in USD)  
 
Receive foreign currency/pay USD
               
Euro
  $ 31,685       1.32  
Japanese Yen
    4,581       0.01  
                 
    $ 36,266          
                 
Estimated fair value, net asset
  $ 942          
                 
 
Debt Instruments
 
The table below presents information about certain of our debt instruments (bank borrowings) as of December 31, 2010.
 
                                                                 
                                              Weighted
 
                                        Fair Market
    Average
 
    2011     2012     2013     2014     Thereafter     Total     Value     Interest Rate  
    (In thousands)  
 
Variable Rate:
                                                               
US$
  $ 56,504     $ 117,005     $ 192,504     $ 4     $ 4     $ 366,021     $ 356,401       2.23 %
RMB
    10,619       3,792                         14,411       14,411       5.48 %
                                                                 
Total Variable Rate
    67,123       120,797       192,504       4       4       380,432       370,812          
                                                                 
Fixed Rate:
                                                               
US$
                            175,000       175,000       207,508       3.25 %
                                                                 
Total Fixed Rate
                            175,000       175,000       207,508          
                                                                 
Total
  $ 67,123     $ 120,797     $ 192,504     $ 4     $ 175,004     $ 555,432     $ 578,320          
                                                                 
 
Interest Rate Swap Contracts
 
The table below presents information regarding our interest rate swaps as of December 31, 2010.
 
                                 
    2011   2012   2013   Fair Market Value
 
Average interest payout rate
    2.72 %     2.59 %     2.50 %        
Interest payout amount
    (3,366 )     (3,155 )     (676 )        
Average interest received rate
    0.26 %     0.26 %     0.26 %        
Interest received amount
    321       319       70          
Fair value loss at December 31, 2010
                            (4,627 )


51


Table of Contents

ITEM 8.   FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
 
We use a 13-week fiscal quarter accounting period with the first quarter ending on the Monday closest to and proceeding April 1 and the fourth quarter always ending on December 31. The first and fourth quarters of 2010 contained 88 and 95 days, respectively, and for 2009, the first and fourth quarters contained 89 and 94 days, respectively.
 
                                 
    First
  Second
  Third
  Fourth
    Quarter   Quarter   Quarter   Quarter
    (In thousands, except per share data)
 
Year Ended December 31, 2010: (a)
                               
Net sales
  $ 138,219     $ 310,248     $ 357,813     $ 373,391  
Gross profit
    26,973       57,094       80,335       90,003  
Income before income taxes
    7,079       11,126       41,584       48,848  
Net income
    4,485       6,740       32,145       36,529  
Net income attributable to TTM Technologies, Inc. stockholders
    4,485       4,929       29,091       33,026  
Earnings per share attributable to TTM Technologies, Inc. stockholders:
                               
Basic
  $ 0.10     $ 0.06     $ 0.36     $ 0.41  
Diluted
  $ 0.10     $ 0.06     $ 0.36     $ 0.41  
Year Ended December 31, 2009:
                               
Net sales
  $ 148,997     $ 144,480     $ 139,075     $ 149,924  
Gross profit
    24,269       27,059       24,207       27,674  
Income (loss) before income taxes
    2,308       9,623       (8,062 )(b)     4,254  
Net income (loss)
    1,427       5,948       (4,885 )     2,367  
Net income (loss) attributable to TTM Technologies, Inc. stockholders
    1,427       5,948       (4,885 )     2,367  
Earnings (loss) per share attributable to TTM Technologies, Inc. stockholders:
                               
Basic
  $ 0.03     $ 0.14     $ (0.11 )   $ 0.05  
Diluted
  $ 0.03     $ 0.14     $ (0.11 )   $ 0.05  
 
 
(a) Our results for the quarters include the activity of PCB Subsidiaries, which we acquired on April 8, 2010.
 
(b) Includes restructuring charges of $2.5 million and long-lived asset impairment charges of $10.3 million.
 
ITEM 9.   CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
 
Not applicable.


52


Table of Contents

ITEM 9A.   CONTROLS AND PROCEDURES
 
Evaluation of Disclosure Controls and Procedures
 
Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) as of December 31, 2010. Based on that evaluation, our Chief Executive Officer and Chief Financial Officer, including management, concluded that, as of December 31, 2010, such disclosure controls and procedures were effective in ensuring that information required to be disclosed by us in reports that we file and submit under the Exchange Act is (i) recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and (ii) accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.
 
Management’s Report on Internal Control Over Financial Reporting
 
Management is responsible for establishing and maintaining adequate internal control over financial reporting, as such item is defined in Exchange Act Rules 13a-15(f) and 15d-15(f)). Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles (GAAP). Internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of our assets; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with GAAP, and that our receipts and expenditures are being made only in accordance with authorizations of management and the board of directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on our financial statements.
 
Under the supervision of and with the participation of our Chief Executive Officer and Chief Financial Officer, management conducted its evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on its evaluation, management concluded that our internal control over financial reporting was effective as of December 31, 2010.
 
The Company acquired the PCB Subsidiaries during April 2010. Management excluded from its evaluation of the effectiveness of our internal control over financial reporting as of December 31, 2010 the acquired entity’s internal control over financial reporting associated with total assets of $1.3 billion and total net sales of $597.8 million included in the consolidated financial statements of the Company as of and for the year ended December 31, 2010.
 
The effectiveness of our internal control over financial reporting as of December 31, 2010 has been audited by the independent registered public accounting firm engaged to audit our 2010 financial statements, KPMG LLP, as stated in their report which appears under the heading “Report of Independent Registered Public Accounting Firm” on page 60 of this report.
 
Inherent Limitations on Effectiveness of Controls
 
Management, including our Chief Executive Officer and Chief Financial Officer, does not expect that our disclosure controls or our internal control over financial reporting will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. The design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Further, because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that misstatements due to error or fraud will not occur or that all control issues and instances of fraud, if any, within the company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. Controls also can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls.


53


Table of Contents

The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Projections of any evaluation of controls effectiveness to future periods are subject to risks. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures.
 
Changes in Internal Control Over Financial Reporting
 
As a result of the acquisition of the PCB Subsidiaries in April 2010, we began implementing internal controls over financial reporting to include consolidation of the PCB Subsidiaries, as well as acquisition-related accounting and disclosures. The integration of the PCB Subsidiaries represents a material change in our internal control over financial reporting. Management continues to be engaged in substantial efforts to evaluate the effectiveness of our internal control procedures and the design of those control procedures relating to the acquisition of the PCB Subsidiaries with the plan to complete and report its evaluation of the PCB Subsidiaries’ internal control over financial reporting by December 31, 2011.
 
There have been no other changes in our internal control over financial reporting during the quarter ended December 31, 2010 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
 
ITEM 9B.   OTHER INFORMATION
 
Not Applicable
 
PART III
 
ITEM 10.   DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT
 
The information required by this Item relating to our directors is incorporated herein by reference to the definitive Proxy Statement to be filed pursuant to Regulation 14A of the Exchange Act for our 2011 Annual Meeting of Stockholders. The information required by this Item relating to our executive officers is included in Item 1, “Business — Management” of this report.
 
ITEM 11.   EXECUTIVE COMPENSATION
 
The information required by this Item is incorporated herein by reference to the definitive Proxy Statement to be filed pursuant to Regulation 14A of the Exchange Act for our 2011 Annual Meeting of Stockholders.
 
ITEM 12.   SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
 
The information required by this Item is incorporated herein by reference to the definitive Proxy Statement to be filed pursuant to Regulation 14A of the Exchange Act for our 2011 Annual Meeting of Stockholders.
 
ITEM 13.   CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS
 
The information required by this Item is incorporated herein by reference to the definitive Proxy Statement to be filed pursuant to Regulation 14A of the Exchange Act for our 2011 Annual Meeting of Stockholders.
 
ITEM 14.   PRINCIPAL ACCOUNTING FEES AND SERVICES
 
The information required by this Item is incorporated herein by reference to the definitive Proxy Statement to be filed pursuant to Regulation 14A of the Exchange Act for our 2011 Annual Meeting of Stockholders.


54


Table of Contents

 
PART IV
 
ITEM 15.   EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
 
(a) Financial Statements
 
(1) Financial Statements are listed in the Index to Financial Statements on page 59 of this Report.
 
  (2)  Other schedules are omitted because they are not applicable, not required, or because required information is included in the consolidated financial statements or notes thereto.
 
(b) Exhibits
 
         
Exhibit
   
Number
 
Exhibits
 
  1 .1   Underwriting Agreement, dated May 8, 2008, among the Registrant, J.P. Morgan Securities Inc. and UBS Securities LLC(1)
  3 .1   Registrant’s Certificate of Incorporation(2)
  3 .2   Registrant’s Fourth Amended and Restated Bylaws(3)
  4 .1   Indenture, dated as of May 14, 2008, between the Registrant and American Stock Transfer and Trust Company(1)
  4 .2   Supplemental Indenture, dated as of May 14, 2008, between the Registrant and American Stock Transfer and Trust Company(1)
  4 .3   Form of Registrant’s common stock certificate(2)
  4 .4   Sell-Down Registration Rights Agreement, dated December 23, 2009, by and among Meadville Holdings Limited, MTG Investment (BVI) Limited, and TTM Technologies, Inc.(4)
  4 .5   Registration Rights Agreement, dated as of April 9, 2010, by and among Tang Hsiang Chien, Su Sih (BVI) Limited, and the Registrant(5)
  4 .6   Shareholders Agreement, dated as of April 9, 2010, by and among Meadville Holdings Limited; Su Sih (BVI) Limited; Tang Hsiang Chien; Tang Chung Yen, Tom; Tang Ying Ming, Mai; and the Registrant(5)
  10 .1   Call Option Transaction Confirmation, dated as of May 8, 2008, between the Registrant and JPMorgan Chase Bank, National Association(1)
  10 .2   Warrant Transaction Confirmation, dated as of May 8, 2008, between the Registrant and JPMorgan Chase Bank, National Association(1)
  10 .3   Call Option Transaction Confirmation, dated as of May 8, 2008, between the Registrant and UBS AG(1)
  10 .4   Warrant Transaction Confirmation, dated as of May 8, 2008, between the Registrant and UBS AG(1)
  10 .5   Call Option Transaction Confirmation, dated as of May 16, 2008, between the Registrant and JPMorgan Chase Bank, National Association(6)
  10 .6   Warrant Transaction Confirmation, dated as of May 16, 2008, between the Registrant and JPMorgan Chase Bank, National Association(6)
  10 .7   Call Option Transaction Confirmation, dated as of May 16, 2008, between the Registrant and UBS AG(6)
  10 .8   Warrant Transaction Confirmation, dated as of May 16, 2008, between the Registrant and UBS AG(6)
  10 .9   Restated Employment Agreement, dated as of March 19, 2010, between the Registrant and Kenton K. Alder(7)
  10 .10   Reserved
  10 .11   Reserved
  10 .12   2006 Incentive Compensation Plan(8)


55


Table of Contents

         
Exhibit
   
Number
 
Exhibits
 
  10 .13   Form of Stock Option Agreement(8)
  10 .14   Form of Restricted Stock Unit Award Agreement(8)
  10 .15   Form of Indemnification Agreement with directors(9)
  10 .16   Stock Purchase Agreement, dated November 16, 2009, by and among Meadville Holdings Limited, MTG Investment (BVI) Limited, the Registrant, TTM Technologies International, Inc., and TTM Hong Kong Limited(10)
  10 .17   Form of Executive Change in Control Severance Agreement(7)
  10 .18   Form of Performance-Based Restricted Unit Award Agreement(11)
  10 .19   Reserved
  10 .20   Reserved
  10 .21   Credit Agreement, dated November 16, 2009, as amended on March 30, 2010 and further amended on August 3, 2010, by and among certain PCB Subsidiaries, the Lenders, and the other parties named therein(12)
  10 .22   Waiver and Amendment Letter with The Hongkong and Shanghai Banking Corporation Limited, dated August 3, 2010(12)
  10 .23   Special Security Agreement(13)
  21 .1   Subsidiaries of the Registrant(14)
  23 .1   Consent of KPMG LLP, independent registered public accounting firm(14)
  31 .1   Certification of Chief Executive Officer(14)
  31 .2   Certification of Chief Financial Officer(14)
  32 .1   Certification of Chief Executive Officer(14)
  32 .2   Certification of Chief Financial Officer(14)
 
 
(1) Incorporated by reference to the Registrant’s Form 8-K as filed with the Securities and Exchange Commission (the Commission) on May 14, 2008.
 
(2) Incorporated by reference to the Registrant’s Form 8-K as filed with the Commission on August 30, 2005.
 
(3) Incorporated by reference to the Registrant’s Form 8-K as filed with the Commission on March 2, 2011.
 
(4) Incorporated by reference to the Registrant’s Form 8-K as filed with the Commission on December 23, 2009.
 
(5) Incorporated by reference to the Registrant’s Form 8-K as filed with the Commission on April 13, 2010.
 
(6) Incorporated by reference to the Registrant’s Form 8-K as filed with the Commission on May 22, 2008.
 
(7) Incorporated by reference to the Registrant’s Form 8-K as filed with the Commission on March 24, 2010.
 
(8) Incorporated by reference to the Registrant’s Form 10-K as filed with the Commission on March 16, 2007.
 
(9) Incorporated by reference to the Registrant’s Form 8-K as filed with the Commission on June 2, 2010.
 
(10) Incorporated by reference to the Registrant’s Form 8-K as filed with the Commission on November 16, 2009.
 
(11) Incorporated by reference to the Registrant’s Form 8-K as filed with the Commission on March 30, 2010.
 
(12) Incorporated by reference to the Registrant’s Form 8-K as filed with the Commission on August 5, 2010.
 
(13) Incorporated by reference to the Registrant’s Form 8-K as filed with the Commission on October 22, 2010.
 
(14) Filed herewith.

56


Table of Contents

 
SIGNATURES
 
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
TTM TECHNOLOGIES, INC.
 
  By: 
/s/  KENTON K. ALDER
Kenton K. Alder
President and Chief Executive Officer
 
Date: March 15, 2011
 
Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.
 
             
Name
 
Title
 
Date
 
         
/s/  KENTON K. ALDER

Kenton K. Alder
  President, Chief Executive Officer (Principal Executive Officer), and Director   March 15, 2011
         
/s/  STEVEN W. RICHARDS

Steven W. Richards
  Executive Vice President, Chief Financial Officer and Secretary (Principal Financial Officer and Principal Accounting Officer)   March 15, 2011
         
/s/  ROBERT E. KLATELL

Robert E. Klatell
  Chairman of the Board   March 15, 2011
         
/s/  JAMES K. BASS

James K. Bass
  Director   March 15, 2011
         
/s/  RICHARD P. BECK

Richard P. Beck
  Director   March 15, 2011
         
/s/  THOMAS T. EDMAN

Thomas T. Edman
  Director   March 15, 2011
         
/s/  PHILIP G. FRANKLIN

Philip G. Franklin
  Director   March 15, 2011
         
/s/  JACQUES S. GANSLER

Jacques S. Gansler
  Director   March 15, 2011
         
/s/  RONALD W. IVERSON

Ronald W. Iverson
  Director   March 15, 2011
         
/s/  JOHN G. MAYER

John G. Mayer
  Director   March 15, 2011


57


Table of Contents

             
Name
 
Title
 
Date
 
         
/s/  TANG CHUNG YEN, TOM

Tang Chung Yen, Tom
  Director   March 15, 2011
         
/s/  DOV S. ZAKHEIM

Dov S. Zakheim
  Director   March 15, 2011


58


Table of Contents

TTM TECHNOLOGIES, INC.
 
Index to Consolidated Financial Statements and Schedule
 
         
    60  
    63  
    64  
    65  
    66  
    67  


59


Table of Contents

 
Report of Independent Registered Public Accounting Firm
 
The Board of Directors and Stockholders
TTM Technologies, Inc.:
 
We have audited TTM Technologies, Inc.’s (the Company) internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control Over Financial Reporting (Item 9A). Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.
 
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
 
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
 
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
 
In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission.
 
The Company acquired the PCB subsidiaries from Meadville Holdings Limited (PCB Subsidiaries) during 2010, and management excluded from its assessment of the effectiveness of the Company’s internal control over financial reporting as of December 31, 2010, the acquired PCB Subsidiaries internal control over financial reporting associated with total assets of $1.3 billion and total revenues of $597.8 million included in the consolidated financial statements of the Company and subsidiaries as of and for the year ended December 31, 2010. Our audit of internal control over financial reporting of the Company also excluded an evaluation of the internal control over financial reporting of the acquired PCB Subsidiaries.
 
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of the Company and subsidiaries as of December 31, 2010 and 2009, and the related consolidated statements of operations, stockholders’ equity and comprehensive income (loss),


60


Table of Contents

and cash flows for each of the years in the three-year period ended December 31, 2010, and our report dated March 15, 2011 expressed an unqualified opinion on those consolidated financial statements.
 
/s/ KPMG LLP
 
Salt Lake City, Utah
March 15, 2011


61


Table of Contents

Report of Independent Registered Public Accounting Firm
 
The Board of Directors and Stockholders
TTM Technologies, Inc.:
 
We have audited the accompanying consolidated balance sheets of TTM Technologies, Inc. and subsidiaries (the Company) as of December 31, 2010 and 2009, and the related consolidated statements of operations, stockholders’ equity and comprehensive income (loss), and cash flows for each of the years in the three-year period ended December 31, 2010. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.
 
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
 
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company and subsidiaries as of December 31, 2010 and 2009, and the results of their operations and their cash flows for each of the years in the three-year period ended December 31, 2010, in conformity with U.S. generally accepted accounting principles.
 
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated March 15, 2011 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.
 
/s/ KPMG LLP
 
Salt Lake City, Utah
March 15, 2011


62


Table of Contents

TTM TECHNOLOGIES, INC.
 
Consolidated Balance Sheets
 
                 
    As of December 31,  
    2010     2009  
    (In thousands)  
 
ASSETS
Current assets:
               
Cash and cash equivalents
  $ 216,078     $ 94,347  
Short-term investments
          1,351  
Restricted cash
          120,000  
Accounts and notes receivable, net
    287,703       89,519  
Inventories
    135,385       60,153  
Prepaid expenses and other current assets
    30,125       10,544  
Deferred income taxes
    7,208       6,645  
                 
Total current assets
    676,499       382,559  
Property, plant and equipment, net
    740,630       88,577  
Deferred income taxes
    23,733       37,430  
Goodwill
    197,808       14,130  
Definite-lived intangibles, net
    97,873       15,111  
Deposits and other non-current assets
    25,409       5,251  
                 
    $ 1,761,952     $ 543,058  
                 
 
LIABILITIES AND EQUITY
Current liabilities:
               
Current portion of long-term debt
  $ 67,123     $  
Accounts payable
    154,600       37,867  
Accounts payable due to related parties
    50,374        
Accrued salaries, wages and benefits
    51,107       19,253  
Equipment payable
    59,802        
Other accrued expenses
    35,194       2,327  
                 
Total current liabilities
    418,200       59,447  
                 
Convertible senior notes, net of discount
    145,283       139,882  
Long-term debt, net of discount
    312,995        
Deferred income taxes
    12,608        
Related party financing obligation
    20,399        
Other long-term liabilities
    19,609       2,812  
                 
Total long-term liabilities
    510,894       142,694  
                 
Commitments and contingencies (Note 13)
               
Equity:
               
TTM Technologies, Inc. stockholders’ equity
               
Common stock, $0.001 par value; 100,000 shares authorized, 80,262 and 43,181 shares issued and outstanding in 2010 and 2009, respectively
    80       43  
Additional paid-in capital
    519,051       215,461  
Retained earnings
    193,814       122,283  
Accumulated other comprehensive income
    15,310       3,130  
                 
Total TTM Technologies, Inc. stockholders’ equity
    728,255       340,917  
Noncontrolling interest
    104,603        
                 
Total equity
    832,858       340,917  
                 
    $ 1,761,952     $ 543,058  
                 
 
See accompanying notes to consolidated financial statements.


63


Table of Contents

TTM TECHNOLOGIES, INC.
 
Consolidated Statements of Operations
 
                         
    Year Ended December 31,  
    2010     2009     2008  
    (In thousands, except per share data)  
 
Net sales
  $ 1,179,671     $ 582,476     $ 680,981  
Cost of goods sold
    925,266       479,267       543,741  
                         
Gross profit
    254,405       103,209       137,240  
                         
Operating expenses:
                       
Selling and marketing
    34,345       26,517       30,436  
General and administrative
    79,668       36,548       33,255  
Amortization of definite-lived intangibles
    13,678       3,440       3,799  
Restructuring charges
    389       5,490        
Impairment of goodwill and long-lived assets
    766       12,761       123,322  
Metal reclamation
                (3,700 )
                         
Total operating expenses
    128,846       84,756       187,112  
                         
Operating income (loss)
    125,559       18,453       (49,872 )
                         
Other income (expense):
                       
Interest expense
    (22,255 )     (11,198 )     (11,065 )
Other, net
    5,333       868       (434 )
                         
Total other expense, net
    (16,922 )     (10,330 )     (11,499 )
                         
Income (loss) before income taxes
    108,637       8,123       (61,371 )
Income tax (provision) benefit
    (28,738 )     (3,266 )     24,460  
                         
Net income (loss)
    79,899       4,857       (36,911 )
Less: Net income attributable to the noncontrolling interest
    (8,368 )            
                         
Net income (loss) attributable to TTM Technologies, Inc. stockholders
  $ 71,531     $ 4,857     $ (36,911 )
                         
Earnings (loss) per share attributable to TTM Technologies, Inc. stockholders:
                       
Basic earnings (loss) per share
  $ 1.02     $ 0.11     $ (0.86 )
                         
Diluted earnings (loss) per share
  $ 1.01     $ 0.11     $ (0.86 )
                         
 
See accompanying notes to consolidated financial statements.


64


Table of Contents

TTM TECHNOLOGIES, INC.
 
Consolidated Statements of Stockholders’ Equity and Comprehensive Income (Loss)
For the Years Ended December 31, 2010, 2009 and 2008
 
                                                                 
                            Accumulated
    Total TTM
             
                Additional
          Other
    Technologies, Inc
             
    Common Stock     Paid-In
    Retained
    Comprehensive
    Stockholders’
    Noncontrolling
    Total
 
    Shares     Amount     Capital     Earnings     Income     Equity     Interest     Equity  
    (In thousands)  
 
Balance, December 31, 2007
    42,380     $ 42     $ 173,365     $ 154,337     $ 850     $ 328,594     $     $ 328,594  
Net loss
                      (36,911 )             (36,911 )           (36,911 )
Foreign currency translation adjustment, net of tax expense of $982
                            1,672       1,672             1,672  
Unrealized loss on effective cash flow hedges, net of tax benefit of $64
                            (108 )     (108 )           (108 )
Reclassification of realized losses on cash flow hedges net of tax of $442
                            752       752             752  
                                                                 
Comprehensive loss
                                            (34,595 )                
Convertible senior note embedded conversion option, net of tax of $15,907
                25,680                   25,680             25,680  
Purchase of convertible note hedge, net of tax benefit of $14,633
                (23,624 )                 (23,624 )           (23,624 )
Issuance of warrants
                26,197                   26,197             26,197  
Exercise of stock options
    277       1       2,394                   2,395             2,395  
Excess tax benefits from stock awards exercised or released
                313                   313             313  
Issuance of common stock for restricted stock units
    154                                            
Stock-based compensation
                5,076                   5,076             5,076  
                                                                 
Balance, December 31, 2008
    42,811       43       209,401       117,426       3,166       330,036             330,036  
Net income
                      4,857             4,857             4,857  
Foreign currency translation adjustment, net of tax benefit of $22
                            (36 )     (36 )           (36 )
                                                                 
Comprehensive income
                                            4,821                  
Exercise of stock options
    59             416                   416             416  
Tax shortfall from stock awards exercised or released
                (621 )                 (621 )           (621 )
Issuance of common stock for restricted stock units
    311                                            
Stock-based compensation
                6,265                   6,265             6,265  
                                                                 
Balance, December 31, 2009
    43,181       43       215,461       122,283       3,130       340,917             340,917  
Acquisition of PCB Subsidiaries
    36,334       36       294,346                   294,382       93,478       387,860  
Net income
                      71,531             71,531       8,368       79,899  
Foreign currency translation adjustment, net of tax expense of $2,386
                            15,301       15,301       2,757       18,058  
Unrealized loss on effective cash flow hedges, net of tax benefit of $564
                            (3,121 )     (3,121 )           (3,121 )
                                                                 
Comprehensive income
                                            83,711                  
Exercise of stock options
    227             2,113                   2,113             2,113  
Excess tax benefits from stock awards exercised or released
                218                   218             218  
Issuance of common stock for restricted stock units
    520       1                         1             1  
Stock-based compensation
                6,913                   6,913             6,913  
                                                                 
Balance, December 31, 2010
    80,262     $ 80     $ 519,051     $ 193,814     $ 15,310     $ 728,255     $ 104,603     $ 832,858  
                                                                 
 
See accompanying notes to consolidated financial statements.


65


Table of Contents

TTM TECHNOLOGIES, INC.
 
Consolidated Statements of Cash Flows
 
                         
    For the Year Ended December 31,  
    2010     2009     2008  
    (In thousands)  
 
Cash flows from operating activities:
                       
Net income (loss)
  $ 79,899     $ 4,857     $ (36,911 )
Adjustments to reconcile net income (loss) to net cash provided by operating activities:
                       
Depreciation of property, plant and equipment
    48,747       19,140       21,324  
Amortization of definite-lived intangible assets
    13,795       3,567       3,917  
Amortization of convertible notes, debt discount and debt issuance costs
    6,780       5,470       5,403  
Non-cash interest imputed on other long-term liabilities and related party financing obligation
    1,084       137       131  
Income tax benefit from restricted stock units released and common stock options exercised
    (506 )     (24 )     (210 )
Deferred income taxes
    16,400       (4,841 )     (38,056 )
Stock-based compensation
    6,913       6,265       5,076  
Impairment of goodwill and long-lived assets
    766       12,761       123,322  
Unrealized (gain) loss on short-term investments
          (325 )      
Net loss (gain) on sale of property, plant and equipment and other
    437       (61 )     252  
Net unrealized gain on derivative assets and liabilities
    (801 )            
Net unrealized foreign currency exchange loss
    500              
Changes in operating assets and liabilities, net of acquisition:
                       
Accounts and notes receivable, net
    (79,920 )     25,686       4,547  
Inventories
    (8,830 )     10,850       (4,854 )
Prepaid expenses and other current assets
    (10,394 )     (101 )     1,104  
Accounts payable
    23,400       (9,996 )     (5,695 )
Accrued salaries, wages and benefits and other accrued expenses
    27,549       592       (3,718 )
                         
Net cash provided by operating activities
    125,819       73,977       75,632  
                         
Cash flows from investing activities:
                       
Acquisition of PCB Subsidiaries, net of cash acquired
    (28,529 )            
Purchase of property, plant and equipment and equipment deposits
    (68,489 )     (11,507 )     (17,789 )
Proceeds from sale of property, plant and equipment and assets held for sale
    8,623       729       165  
Restricted cash for future acquisition
          (120,000 )      
Restricted cash released to cash and cash equivalents
    120,000              
Redesignation of cash and cash equivalents to short-term investments
                (19,522 )
Proceeds from the redemption of short-term investments
    1,351       2,631       15,865  
Purchase of licensing agreement
          (350 )      
                         
Net cash provided by (used in) investing activities
    32,956       (128,497 )     (21,281 )
                         
Cash flows from financing activities:
                       
Repayment of assumed long-term debt in acquisition
    (387,980 )            
Proceeds from new long-term borrowings
    387,980              
Net repayment of revolving loan
    (37,987 )            
Proceeds from exercise of stock options
    2,113       416       2,394  
Excess tax benefits from stock awards exercised or released
    506       24       210  
Proceeds from issuance of convertible senior notes
                175,000  
Principal payments on long-term debt
                (85,000 )
Proceeds from warrants
                26,197  
Payment of convertible note hedge
                (38,257 )
Payment of debt issuance costs
                (5,751 )
                         
Net cash (used in) provided by financing activities
    (35,368 )     440       74,793  
                         
Effect of foreign currency exchange rates on cash and cash equivalents
    (1,676 )     (38 )     640  
                         
Net increase (decrease) in cash and cash equivalents
    121,731       (54,118 )     129,784  
Cash and cash equivalents at beginning of year
    94,347       148,465       18,681  
                         
Cash and cash equivalents at end of year
  $ 216,078     $ 94,347     $ 148,465  
                         
Supplemental cash flow information:
                       
Cash paid for interest
  $ 14,995     $ 5,699     $ 6,031  
Cash paid, net for income taxes
    15,569       3,855       15,001  
 
Supplemental disclosures of noncash investing and financing activities:
 
The Company issued common stock and replacement awards with a fair value of $294,382 in connection with the PCB Subsidiaries acquisition, (as defined in the accompanying notes.) See Note 3.
 
At December 31, 2010, 2009 and 2008 accrued purchases of equipment totaled $75,397, $586 and $1,470, respectively.
 
During 2009, the Company commenced the process of selling the buildings at its Redmond, Washington production facility and as a result classified such assets to assets held for sale. See Note 8.
 
During 2008, the Company recognized unrealized losses on derivative instrument of $108, net of tax.
 
See accompanying notes to consolidated financial statements.


66


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements
(Dollars and shares in thousands, except per share data)
 
(1)   Nature of Operations and Basis of Presentation
 
TTM Technologies, Inc. (the Company or TTM) is a leading global provider of time-critical and technologically complex printed circuit board (PCB) products and backplane assemblies (PCBs populated with electronic components), which serve as the foundation of sophisticated electronic products. The Company provides time-to-market and advanced technology products and offers a one-stop manufacturing solution to customers from engineering support to prototype development through final volume production. The Company serves a diversified customer base in various markets throughout the world, including manufacturers of networking/communications infrastructure products, personal computers, touch screen tablets and mobile media devices (cellular phones and smart phones). The Company also serves high-end computing, commercial aerospace/defense, and industrial/medical industries. The Company’s customers include both original equipment manufacturers (OEMs) and electronic manufacturing services (EMS) providers.
 
In April 2010, the Company acquired from Meadville Holdings Limited (Meadville) all of the issued and outstanding capital stock of four of its subsidiaries. These four companies and their respective subsidiaries collectively referred to as the PCB Subsidiaries, comprised Meadville’s PCB manufacturing and distributing business. See Note 3.
 
Prior to the Company’s acquisition of the PCB Subsidiaries, the Company had two operating segments, PCB Manufacturing and Backplane Assembly, consistent with the nature of our operations. Due to the acquisition, the Company reassessed its operating segments and now manages its worldwide operations based on two geographic operating segments: (1) North America, which consists of seven domestic PCB fabrication plants, including a facility that provides follow-on value-added services primarily for one of the PCB fabrication plants, and one backplane assembly plant in Shanghai, China, which is managed in conjunction with our U.S. operations and its related European sales support infrastructure; and (2) Asia Pacific, which consists of the PCB Subsidiaries and their seven PCB fabrication plants, which include a substrate facility. Each segment operates predominantly in the same industry with production facilities that produce similar customized products for our customers and uses similar means of product distribution in their respective geographic regions.
 
Certain reclassifications of prior year amounts have been made to conform to the current year presentation.
 
(2)   Summary of Significant Accounting Policies
 
Use of Estimates
 
The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amount of revenues and expenses during the reporting period. Such estimates include the sales return reserve; short-term investments; accounts receivable; inventories; goodwill; intangible assets and other long-lived assets; self insurance reserves; derivative instruments and hedging activities; asset retirement obligations; environmental liabilities; legal contingencies; assumptions used in the calculation of stock-based compensation and income taxes; establishing the fair value of individual assets acquired, liabilities assumed, and noncontrolling interest when the Company acquires other businesses; and others. These estimates and assumptions are based on management’s best estimates and judgment. Management evaluates its estimates and assumptions on an ongoing basis using historical experience and other factors, including the economic environment, which management believes to be reasonable under the circumstances. Management adjusts such estimates and assumptions when facts and circumstances dictate. Unpredictable spending by OEM and EMS companies has also increased the uncertainty inherent in such estimates and assumptions. As future events and their effects cannot be determined with precision, actual results could differ from those estimates.


67


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
Principles of Consolidation
 
The consolidated financial statements include the accounts of TTM Technologies, Inc. and its subsidiaries. All intercompany accounts and transactions have been eliminated in consolidation.
 
Foreign Currency Translation and Transactions
 
The functional currency of certain of the Company’s subsidiaries is either the Chinese RMB or the Hong Kong Dollar. Accordingly, assets and liabilities are translated into U.S. dollars using period-end exchange rates. Sales and expenses are translated at the average exchange rates in effect during the period. The resulting translation gains or losses are recorded as a component of accumulated other comprehensive income in the consolidated statement of stockholders’ equity and comprehensive income (loss). Gains and losses resulting from foreign currency transactions are included in income as a component of other, net in the consolidated statements of operations and totaled $3,174, $26 and ($69) for the years ended December 31, 2010, 2009 and 2008, respectively.
 
Cash Equivalents and Short-Term Investments
 
The Company considers highly liquid investments with insignificant interest rate risk and original maturities to the Company of three months or less to be cash equivalents. Cash equivalents consist primarily of interest-bearing bank accounts, money market funds and short-term debt securities.
 
The Company considers highly liquid investments with an effective maturity to the Company of more than three months and less than one year to be short-term investments.
 
Short-term investments are comprised of an investment in The Reserve Primary Fund (Primary Fund), a money market fund which has been liquidated as of December 31, 2010. The Company recorded these investments as trading securities and at fair value. Unrealized gains and losses on trading securities are recorded as a component of other, net in the consolidated statements of operations.
 
Accounts and Notes Receivable, Allowance for Doubtful Accounts and Factoring Arrangements
 
Accounts Receivable
 
Accounts receivable are reflected at estimated net realizable value, do not bear interest and do not generally require collateral. The Company performs credit evaluations of its customers and adjusts credit limits based upon payment history and the customer’s current creditworthiness. The Company maintains an allowance for doubtful accounts based upon a variety of factors. The Company reviews all open accounts and provides specific reserves for customer collection issues when it believes the loss is probable, considering such factors as the length of time receivables are past due, the financial condition of the customer, and historical experience. The Company also records a reserve for all customers, excluding those that have been specifically reserved for, based upon evaluation of historical losses, which exceeded the specific reserves the Company had established.
 
Additionally, in the normal course of business, the Company’s foreign subsidiaries utilize accounts receivable factoring arrangements. Under these arrangements, the Company may sell certain of its accounts receivable to financial institutions, which are accounted for as a sale, at a discount ranging from 1% to 2% of the accounts receivable. In all arrangements there is no recourse against the Company for its customers’ failure to pay. The Company sold $49,372 of accounts receivable for the year ended December 31, 2010. The Company did not sell any accounts receivable for the years ended December 31, 2009 and 2008.


68


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
 
Allowance for Doubtful Accounts
 
The following summarizes the activity in the Company’s allowance for doubtful accounts for the years ended December 31, 2010, 2009 and 2008:
 
                         
    For the Year Ended December 31,  
    2010     2009     2008  
    (In thousands)  
 
Balance at beginning of year
  $ 1,015     $ 1,620     $ 2,023  
Additions charged to expense
    852       18       112  
Deductions
    (109 )     (623 )     (515 )
Effect of foreign currency exchange rates
    69              
                         
Balance at end of year
  $ 1,827     $ 1,015     $ 1,620  
                         
 
Notes Receivable
 
Notes receivable represent short-term trade notes received from financial institutions on behalf of certain of the Company’s customers for the sale of PCBs and are reflected at estimated net realizable value, do not bear interest and do not generally require collateral. The Company does not maintain an allowance for doubtful accounts on these trade notes as the financial institution bears the risk of loss for uncollectibilty.
 
Additionally, in the normal course of business, the Company’s foreign subsidiaries may sell certain of its notes receivable at a discount ranging from 1% to 2% of the notes receivable. The Company sold $78,416, $20,035 and $1,987 for the years ended December 31, 2010, 2009 and 2008, respectively.
 
Inventories
 
Inventories are stated at the lower of cost (determined on a first-in, first-out and weighted average basis) or market. Assessments to value the inventory at the lower of the actual cost to purchase and / or manufacture the inventory, or the current estimated market value of the inventory, are based upon assumptions about future demand and market conditions. As a result of the Company’s assessments, when the market value of inventory is less than the carrying value, the inventory cost is written down to the market value and the write down is recorded as a charge to cost of goods sold.
 
Property, Plant and Equipment, Net
 
Property, plant and equipment are recorded at cost. Depreciation expense is computed using the straight-line method over the estimated useful lives of the assets. Assets recorded under leasehold improvements are amortized using the straight-line method over the lesser of their useful lives or the related lease term. The Company uses the following estimated useful lives:
 
         
Land use rights
    50-99 years  
Buildings and improvements
    7-40 years  
Machinery and equipment
    3-12 years  
Furniture and fixtures
    3-7 years  
Automobiles
    5 years  
 
Upon retirement or other disposition of property, plant and equipment, the cost and related accumulated depreciation are removed from the accounts. The resulting gain or loss is included in the determination of operating income (loss) in the period incurred. Depreciation and amortization expense on property, plant and equipment was $48,747, $19,140, and $21,324, for the years ended December 31, 2010, 2009 and 2008 respectively.
 
The Company capitalizes interest on borrowings during the active construction period of major capital projects. Capitalized interest is amortized over the average useful lives of such assets, which primarily consist of buildings and machinery and equipment. The Company capitalized interest costs of $1,522, $287, and $275 during the years ended December 31, 2010, 2009 and 2008, respectively, in connection with various capital projects.


69


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
Major renewals and betterments are capitalized and depreciated over their estimated useful lives while minor expenditures for maintenance and repairs are included in operating income (loss) as incurred.
 
Goodwill
 
Goodwill represents the excess of purchase price of an acquisition over the fair value of net assets acquired. Goodwill is not amortized but instead should be tested for impairment, at a reporting unit level, annually and when events and circumstances warrant an evaluation. The Company evaluates goodwill on an annual basis, as of the end of the fourth quarter, and whenever events and changes in circumstances indicate that there may be a potential impairment. In making this assessment, management relies on a number of factors, including operating results, business plans, economic projections, anticipated future cash flows, business trends and market conditions.
 
The Company has two operating segments. In the fourth quarter of 2010, the Company performed its annual impairment test of goodwill and concluded that goodwill was not impaired. See Note 8 for information regarding the goodwill impairment recorded in 2008 as a result of the annual impairment test.
 
Intangible Assets
 
Intangible assets include customer relationships, trade name, order backlog and licensing agreements, which are being amortized over their estimated useful lives using straight-line and accelerated methods. The estimated useful lives of such intangibles range from 0.2 years to 15 years. Amortization expense related to acquired licensing agreements is classified as a component of cost of goods sold.
 
Impairment of Long-lived Assets
 
Long-lived tangible assets, including property, plant and equipment, assets held for sale, and definite-lived intangible assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying value of the asset or asset groups may not be recoverable. The Company regularly evaluates whether events and circumstances have occurred that indicate possible impairment and relies on a number of factors, including operating results, business plans, economic projections, and anticipated future cash flows. The Company uses an estimate of the future undiscounted net cash flows of the related asset or asset group over the remaining life in measuring whether the assets are recoverable. Measurement of the amount of impairment, if any, is based upon the difference between the asset’s carrying value and estimated fair value. Fair value is determined through various valuation techniques, including market and income approaches as considered necessary.
 
The Company classifies assets to be sold as assets held for sale when (i) Company management has approved and commits to a plan to sell the asset, (ii) the asset is available for immediate sale in its present condition and is ready for sale, (iii) an active program to locate a buyer and other actions required to sell the asset have been initiated, (iv) the sale of the asset is probable, (v) the asset is being actively marketed for sale at a price that is reasonable in relation to its current fair value, and (vi) it is unlikely that significant changes to the plan will be made or that the plan will be withdrawn. Assets classified as held for sale are recorded at the lower of the carrying amount or fair value less the cost to sell and are a component of prepaid expenses and other current assets in the consolidated balance sheets.
 
Revenue Recognition
 
The Company derives its revenue primarily from the sale of PCBs using customer supplied engineering and design plans and recognizes revenues when: (i) persuasive evidence of a sales arrangement exists, (ii) the sales terms are fixed and determinable, (iii) title and risk of loss have transferred, and (iv) collectibility is reasonably assured — generally when products are shipped to the customer, except in situations in which title passes upon receipt of the products by the customer. In this case, revenues are recognized upon notification that customer receipt has occurred. The Company does not have customer acceptance provisions, but it does provide its customers a limited right of return for defective PCBs. The Company accrues an estimated amount for sales returns and allowances related to defective PCBs at the time of sale based on its ability to estimate sales returns and allowances using historical information. The reserve for sales returns and allowances is included as a reduction to accounts receivable, net. Shipping and handling fees and related freight costs and supplies associated with shipping products to customers are included as a component of cost of goods sold.


70


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
The following summarizes the activity in the Company’s allowance for sales returns and allowances for the years ended December 31, 2010, 2009 and 2008:
 
                         
    For the Year Ended December 31,  
    2010     2009     2008  
    (In thousands)  
 
Balance at beginning of year
  $ 2,636     $ 3,291     $ 3,681  
Additions charged to expense
    11,663       3,933       4,488  
Deductions
    (9,933 )     (4,588 )     (4,878 )
Effect of foreign currency exchange rates
    14              
                         
Balance at end of year
  $ 4,380     $ 2,636     $ 3,291  
                         
 
Stock-Based Compensation
 
The Company recognizes stock-based compensation expense in its consolidated financial statements for its incentive compensation plan awards and its recently acquired foreign employee stock awards.
 
The incentive compensation plan awards include performance-based restricted stock units, restricted stock units, and stock options and the associated compensation expense is based on the grant date fair value of the awards, net of estimated forfeitures. Compensation expense for the incentive compensation plan awards is recognized on a straight line basis over the vesting period of the awards. The fair value of performance-based restricted stock units is estimated on the grant date using a Monte Carlo simulation model based on the underlying common stock closing price as of the date of grant, the expected term, stock price volatility, and risk-free interest rates. The fair value of restricted stock units is measured on the grant date based on the quoted closing market price of the Company’s common stock. The fair value of the stock options is estimated on the grant date using the Black-Scholes option pricing model based on the underlying common stock closing price as of the date of grant, the expected term, stock price volatility, and risk-free interest rates.
 
In conjunction with the acquisition of foreign subsidiaries during the year ended December 31, 2010, existing foreign employee share awards were replaced with fractional shares of TTM common stock plus cash. See Notes 3 and 14. The fair value of the foreign employee share awards was estimated based on the closing price of TTM’s common stock on the effective date of the acquisition plus cash equivalent in an amount to have been received by the foreign subsidiaries’ shareholders as a dividend after the close of the acquisition, net of forfeitures. Compensation expense for the foreign employee share awards is recognized on a straight line basis over the vesting period of the awards.
 
Income Taxes
 
Income taxes are accounted for under the asset and liability method. Deferred income tax assets or liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and operating loss and tax credit carryforwards. Deferred income tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be settled or realized. The effect on deferred income tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. Deferred income tax assets are reviewed for recoverability and the Company records a valuation allowance to reduce its deferred income tax assets when it is more likely than not that all or some portion of the deferred income tax assets will not be realized.
 
The Company has various foreign subsidiaries formed or acquired to conduct or support its business outside the United States. The Company does not provide for U.S. income taxes on undistributed earnings for its Asia Pacific operating segment as the foreign earnings will be permanently reinvested in such foreign jurisdictions.
 
The Company recognizes the effect of income tax positions only if those positions are more likely than not of being sustained. Recognized income tax positions are measured at the largest amount that is greater than 50 percent likely to be realized. Changes in recognition or measurement are reflected in the period in which the change in


71


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
judgment occurs. Estimated interest and penalties related to underpayment of income taxes are recorded as a component of income tax provision in the consolidated statement of operations.
 
Self Insurance
 
The Company is primarily self insured in North America for group health insurance and workers compensation benefits provided to employees. The Company also purchases stop loss insurance to protect against annual claims per individual and at an aggregate level. The individual insured stop loss on the Company’s self insurance for each program is $250 per individual. Self insurance liabilities are estimated for claims incurred but not paid based on judgment, using our historical claim data and information and analysis provided by actuarial and claim advisors, our insurance carrier and other professionals. The Company has accrued $5,617 and $5,212 for self insurance liabilities at December 31, 2010 and 2009, respectively, and these amounts are reflected within accrued salaries, wages and benefits in the consolidated balance sheets.
 
Group health insurance and workers compensation benefits for the Company’s Asia Pacific region are fully insured.
 
Derivative Instruments and Hedging Activities
 
Derivative financial instruments are recognized as either assets or liabilities in the consolidated balance sheets at their respective fair values. As a matter of policy, the Company uses derivatives for risk management purposes, and the Company does not use derivatives for speculative purposes.
 
Derivatives are typically entered into as hedges for changes in interest rates, currency exchange rates, and other risks. When the Company determines to designate a derivative instrument as a cash flow hedge, the Company formally documents the hedging relationship and its risk management objective and strategy for undertaking the hedge, the hedging instrument, the hedged item, the nature of the risk being hedged, how the hedging instrument’s effectiveness in offsetting the hedged risk will be assessed, and a description of the method of measuring ineffectiveness. The Company also formally assesses, both at the hedge’s inception and on an ongoing basis, whether the derivative that is used in hedging transactions is highly effective in offsetting changes in cash flows of hedged items.
 
Fair value of the derivative instruments is determined using pricing models developed based on the underlying swap interest rate, foreign currency exchange rates, and other observable market data as appropriate. The values are also adjusted to reflect nonperformance risk of both the counterparty and the Company. For derivatives that are designated as a cash flow hedge, changes in the fair value of the derivative are recognized in accumulated other comprehensive income, to the extent the derivative is effective at offsetting the changes in cash flow being hedged until the hedged item affects earnings. To the extent there is any hedge ineffectiveness, changes in fair value relating to the ineffective portion are immediately recognized in earnings. Changes in the fair value of derivatives that are not designated as hedges are recorded in earnings each period.
 
Value Added and Sales Tax Collected from Customers
 
As a part of the Company’s normal course of business, value added and sales taxes are collected from customers. Such taxes collected are remitted, in a timely manner, to the appropriate governmental tax authority on behalf of the customer. The Company’s policy is to present revenue and costs, net of value added and sales taxes.
 
Fair Value Measures
 
The Company measures at fair value its financial and non-financial assets by using a fair value hierarchy that prioritizes the inputs to valuation techniques used to measure fair value. Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the


72


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
measurement date, essentially an exit price, based on the highest and best use of the asset or liability. The levels of the fair value hierarchy are:
 
Level 1 — Quoted market prices in active markets for identical assets or liabilities;
 
Level 2 — Significant other observable inputs (e.g. quoted prices for similar items in active markets, quoted prices for identical or similar items in markets that are not active, inputs other than quoted prices that are observable, such as interest rate and yield curves, and market-corroborated inputs); and
 
Level 3 — Unobservable inputs in which there is little or no market data, which require the reporting unit to develop its own assumptions.
 
Asset Retirement Obligations
 
The Company accounts for asset retirement obligations by recognizing a liability for the fair value of legally required asset retirement obligations associated with long-lived assets in the period in which the retirement obligations are incurred and the liability can be reasonably estimated. The Company capitalizes the associated asset retirement costs as part of the carrying amount of the long-lived asset. The liability is initially measured at fair value and subsequently is adjusted for accretion expense and changes in the amount or timing of the estimated cash flows. Accretion expense is recorded as a component of general and administrative expense in the consolidated statement of operations.
 
Environmental Accrual
 
Accruals for estimated costs for environmental obligations generally are recognized no later than the date when the Company identifies what cleanup measures, if any, are likely to be required to address the environmental conditions. Included in such obligations are the estimated direct costs to investigate and address the conditions, and the associated engineering, legal and consulting costs. In making these estimates, the Company considers information that is currently available, existing technology, enacted laws and regulations, and its estimates of the timing of the required remedial actions. Such accruals are initially measured on a discounted basis — and are adjusted as further information becomes available or circumstances change — and are accreted up over time.
 
Earnings Per Share
 
Basic earnings per common share excludes dilution and is computed by dividing net income attributable to TTM Technologies, Inc. stockholders by the weighted average number of common shares outstanding during the period. Diluted earnings per common share reflect the potential dilution that could occur if stock options or other common stock equivalents were exercised or converted into common stock. The dilutive effect of stock options or other common stock equivalents is calculated using the treasury stock method.
 
Comprehensive Income (Loss)
 
Comprehensive income (loss) includes changes to equity accounts that were not the result of transactions with stockholders. Comprehensive income (loss) is comprised of net income (loss), changes in the cumulative foreign currency translation adjustments and realized and unrealized gains or losses on hedged derivative instruments.
 
Loss Contingencies
 
The Company establishes an accrual for an estimated loss contingency when it is both probable that an asset has been impaired or that a liability has been incurred and the amount of the loss can be reasonably estimated. Any legal fees expected to be incurred in connection with a contingency are expensed as incurred.


73


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
Recently Issued Accounting Standards
 
In January 2010, the FASB issued ASU 2010-06, Fair Value Measurements and Disclosures (Topic 820): Improving Disclosures about Fair Value Measurements, which will require companies to make new disclosures about recurring or nonrecurring fair value measurements including significant transfers into and out of Level 1 and Level 2 fair value hierarchies and information on purchases, sales, issuance and settlements on a gross basis in the reconciliation of Level 3 fair value measurements. The ASU is effective prospectively for financial statements issued for fiscal years and interim periods beginning after December 15, 2009. The new disclosures about purchases, sales, issuance and settlements on a gross basis in the reconciliation of Level 3 fair value measurements is effective for interim and annual reporting periods beginning after December 15, 2010. The Company expects that the adoption of ASU 2010-06 will not have a material impact on its consolidated financial statements.
 
(3)   Acquisition of PCB Subsidiaries
 
On the evening of April 8, 2010 (in the morning of April 9, 2010, Hong Kong time), the Company acquired from Meadville Holdings Limited (Meadville), an exempted company incorporated under the laws of the Cayman Islands, and MTG Investment (BVI) Limited (MTG), a company incorporated under the laws of the British Virgin Islands and a wholly owned subsidiary of Meadville, all of the issued and outstanding capital stock of four wholly owned subsidiaries of MTG. These four companies, through their respective subsidiaries, engage in the business of manufacturing and distributing printed circuit boards, including circuit design, quick-turn-around services, and drilling and routing services. Subsequent to the acquisition, these four companies and their subsidiaries (together, the PCB Subsidiaries) are subsidiaries of the Company and represent the Asia Pacific operating segment of the Company.
 
The Company purchased the PCB Subsidiaries for a total consideration of $114,034 in cash and 36,334 shares of TTM common stock, of which approximately 26,225 are subject to restrictions. After taking into account the 36,334 shares of TTM common stock issued in the acquisition and based on the number of shares outstanding on April 8, 2010, the date the Company acquired the PCB Subsidiaries, approximately 45% of TTM common stock outstanding was held by Meadville, its shareholders, or their transferees.
 
Bank fees and legal and accounting costs associated with the acquisition of the PCB Subsidiaries of $9,170 and $5,383 for the years ended December 31, 2010 and 2009, respectively, have been expensed and recorded as general and administrative expense in the consolidated statement of operations in accordance with ASC Topic 805, Business Combinations.
 
As part of the consideration for the purchase of all of the outstanding capital stock of the PCB Subsidiaries as described above, the Company was required to maintain approximately $120,000 in cash and cash equivalents in various accounts, which were restricted in nature and therefore recorded as restricted cash in the consolidated balance sheet as of December 31, 2009.
 
The following summarizes the components of the PCB Subsidiaries purchase price:
 
         
    (In thousands)  
 
Value of TTM shares issued:
       
TTM shares issued with restrictions
  $ 201,959  
TTM shares issued without restrictions
    89,965  
Foreign employee replacement share awards
    2,458  
         
      294,382  
Cash consideration
    114,034  
         
Total
  $ 408,416  
         


74


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
The value of the shares of the Company’s common stock used in determining the purchase price was $9.06 per share, the closing price of the Company’s common stock on April 8, 2010, the effective date of the acquisition. Additionally, approximately 26,225 of the Company’s shares issued and subsequently distributed to the principal shareholders in the acquisition of the PCB Subsidiaries maintain certain restrictions, including a “lock-up” transfer restriction during the 18-month period following the closing of the acquisition of the PCB Subsidiaries and therefore, the fair value of these shares has been determined considering the restrictions, resulting in a discount of 15% from the closing share price.
 
The foreign employee share awards were granted to certain employees involved in the PCB Subsidiaries business by a related party which was previously owned by the controlling shareholder of the PCB Subsidiaries before the Company’s acquisition of the PCB Subsidiaries. The fair value of the share awards included as purchase consideration was determined using a $9.06 per share price plus cash prorated for the pre-combination service period. See Note 14.
 
The purchase price of the PCB Subsidiaries was allocated to tangible and intangible assets acquired, liabilities assumed and noncontrolling interests based on their estimated fair value at the date of the acquisition (April 8, 2010). The excess of the purchase price over the fair value of net assets acquired and noncontrolling interests was allocated to goodwill.
 
The fair values assigned are based on reasonable methods applicable to the nature of the assets acquired, liabilities assumed and noncontrolling interests. The following summarizes the final estimated fair values of net assets acquired and noncontrolling interests:
 
         
    (In thousands)  
 
Cash
  $ 85,505  
Accounts and notes receivables ($139,398 contractual gross receivables)
    131,844  
Inventories
    66,150  
Other current assets
    12,762  
Property, plant, and equipment
    567,985  
Identifiable intangible assets
    96,588  
Goodwill
    183,267  
Other assets
    15,133  
Current liabilities
    (196,866 )
Long-term debt, net of discount
    (417,414 )
Related party financing obligation
    (19,381 )
Other liabilities
    (23,679 )
Noncontrolling interest
    (93,478 )
         
Total
  $ 408,416  
         
 
As of December 31, 2010, the purchase price allocation had been finalized.
 
Equipment payables
 
Equipment payables represent equipment purchases, some with extended payment terms. Equipment purchases with payment terms less than one year are reported as Equipment payables in the consolidated balance sheet and those with payment terms greater than one year are included in Other long-term liabilities in the consolidated balance sheet.


75


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
Property, plant and equipment
 
The fair value of property, plant and equipment was determined by utilizing three approaches: the cost, sales comparison, and income capitalization approaches combined with management assumptions. Each approach assumes valuation of the property at the property’s highest and best use.
 
Long-term debt, net of discount
 
On the acquisition date, the Company became a party to the PCB Subsidiaries’ November 16, 2009 Credit Agreement with various lenders. The credit agreement was put in place in contemplation of the acquisition in order to refinance existing credit facilities consisting of a term and revolving loan and factoring and letter of credit facilities. The amount drawn under this credit agreement to refinance and extinguish the existing credit facilities was approximately $388,000 after the completion of the acquisition of the PCB Subsidiaries. The fair value of existing debt assumed was based on its contractual provisions that required it to be repaid upon a change in control.
 
Additionally, certain bank loans maintained by the PCB Subsidiaries within the People’s Republic of China (PRC) were kept in place after the Company’s completion of the acquisition of the PCB Subsidiaries. The amount drawn under these lines as of the acquisition date amounted to approximately $30,000. The Company determined the fair value of the assumed debt using a present value analysis based on market rates of LIBOR plus spread for the debt.
 
Related party financing obligation
 
The related party financing obligation consists of a put and call option agreement which grants the noncontrolling interest a put option to sell, and to one of the PCB Subsidiaries a call option to purchase, the remaining 20% equity interest in one of its majority owned subsidiaries. The exercise price of the put option is the greater of (i) an enterprise value calculation, which uses earnings before interest and taxes, depreciation and amortization projections on the extrapolation of the latest unaudited combined financial results of the majority owned subsidiary to a four-year period and an enterprise value multiplier of 5.5 times, or (ii) the net asset value based on the extrapolation of the latest unaudited combined financial results of the majority owned subsidiary as at end of the fiscal year 2012; or (iii) the minimum price of approximately 15,384 EUR plus interest which will accrue at a rate of 2.5% compounded annually until the option is exercised. Fair value as of the acquisition date of the financial liability was based upon the minimum price as the other two scenarios were determined to be nonsubstantive due to the challenging current and expected future operations of the subsidiary. As the minimum price represents a fixed obligation, the noncontrolling interest was accounted for as a financing obligation rather than a noncontrolling interest and 100% of the subsidiary is consolidated. The fair value of the related party financial liability was estimated based on the minimum price of the obligation plus 2.5% interest discounted at the liability’s discount rate based on the Company’s adjusted cost of borrowing as of the acquisition date.
 
Noncontrolling Interest
 
Noncontrolling interests consist of a 29.8% equity interest in one PCB manufacturing subsidiary and a 20.0% equity interest in one other PCB manufacturing subsidiary held by third parties. The fair value was determined by utilizing a combination of income and market comparable approaches. The income approach was used to estimate the total enterprise value of each noncontrolling interest by estimating discounted future cash flows. The market comparable approach indicates the fair value of the noncontrolling interest based on a comparison to comparable enterprises in similar lines of business that are publicly traded or are part of a public or private transaction.


76


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
Identifiable Intangible Assets
 
Acquired identifiable intangible assets include customer relationships, trade name and order backlog. The fair value of the identifiable intangible assets was determined using various income approach methods, including excess earnings and relief from royalties, as appropriate to determine the present value of expected future cash flows for each identifiable intangible asset based on discount rates which incorporate a risk premium to take into account the risks inherent in those expected cash flows. The expected cash flows were estimated using available historical data adjusted based on the Company’s historical experience and the expectations of market participants. The amounts assigned to each class of intangible assets and the related weighted average amortization periods are as follows:
 
                 
    Intangible Asset
    Weighted-Average
 
    Acquired     Amortization Period  
    (In thousands)        
 
Customer relationships
  $ 84,998       8.0 years  
Trade name
    10,302       6.0 years  
Order backlog
    1,288       0.2 years  
                 
    $ 96,588          
                 
 
Goodwill
 
Goodwill represents the excess of the PCB Subsidiaries purchase price over the fair value of assets acquired, liabilities assumed and noncontrolling interests. During the year ended December 31, 2010, goodwill was adjusted to reflect:
 
  •  a decrease in fair value of inventory by $358 as a result of additional information received regarding the existence of certain inventory;
 
  •  a decrease in noncontrolling interests by $12,630 resulting from the completion of the valuation for the noncontrolling interests;
 
  •  a decrease in property, plant and equipment by $11,543 due to the identification of an asset held for sale and the completion of the valuation of certain property acquired;
 
  •  a decrease in the related party financing obligation by $1,156 resulting from the completion of its valuation;
 
  •  an increase in other current assets by $1,006 and other assets by $2,326 due to completion of the compilation of deferred tax assets and reclassification of non current deferred taxes of $7,671 from other assets to other liabilities;
 
  •  an increase in current liabilities of $914 and other liabilities of $2,498 related to other lease obligations and non current deferred tax liabilities, the reclassification of certain equipment payables of approximately $7,936 to current liabilities due to the short-term nature of these obligations; and
 
  •  an increase in identifiable intangible assets of $9,023 due to completion of the valuation of such assets.
 
During the fourth quarter, the Company recorded a reduction in the value of a partially idle facility and equipment to the estimated fair values. As a result, the Company has finalized the accounting for property, plant and equipment. As a direct result of the change in property, plant and equipment, additional changes in the fair values for intangible assets, deferred income taxes and noncontrolling interests were required to be revised as such fair values include the fair value of property, plant and equipment as an input.
 
Goodwill represents the excess of the PCB Subsidiaries purchase price over the fair value of assets acquired, liabilities assumed and noncontrolling interests. Prior to the Company’s acquisition of the PCB Subsidiaries, the Company had two operating segments, PCB Manufacturing and Backplane Assembly, consistent with the nature of its operations. Due to the acquisition, the Company has reassessed its operating segments and determined that it has two operating segments based primarily on geographical location of operations, North America and Asia Pacific.


77


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
The PCB Subsidiaries’ excess purchase price over the fair value of assets acquired, liabilities assumed and noncontrolling interests has been appropriately allocated to the Asia Pacific operating segment.
 
The Company believes that the acquisition of the PCB Subsidiaries produced the following significant benefits:
 
  •  Create a Leading Global PCB Company.  The combination of the Company and the PCB Subsidiaries has created a leading global PCB company with high-technology capabilities and highly diversified revenue mix by geographic region and end market. Additionally, the combination resulted in a one-stop global solution from quick-turn through volume production and a focused facility specialization strategy.
 
  •  Increased Market Presence and Opportunities.  The combination of the Company and the PCB Subsidiaries has created an opportunity to capture additional business globally from both existing and new customers, particularly in North America and Europe.
 
  •  Operating Efficiencies.  The combination of the Company and the PCB Subsidiaries has also provided the opportunity for potential economies of scale, cost savings and access to a highly trained PCB Subsidiaries workforce, resulting from a global sales force and manufacturing platform; complementary footprints, customers and end markets; and talented management teams with leading expertise in the Asian market.
 
The Company believes that these primary factors support the amount of goodwill recognized as a result of the purchase price paid for the PCB Subsidiaries, in relation to other acquired tangible and intangible assets. The goodwill acquired in the acquisition is not deductible for income tax purposes.
 
Results of Operations
 
Included in the consolidated statement of operations are net sales of $597,842 and net income of $58,586 for the year ended December 31, 2010 from the PCB Subsidiaries’ operations.
 
Pro forma Results of Operations
 
Unaudited pro forma operating results for the Company, assuming the acquisition of the PCB Subsidiaries occurred on January 1, 2010 and 2009 are as follows:
 
                 
    For the Year Ended December 31,  
    2010     2009  
    (In thousands, except per share data)  
 
Net sales
  $ 1,363,289     $ 1,206,411  
                 
Net income
  $ 78,210     $ 24,205  
                 
Basic earnings per share
  $ 0.98     $ 0.30  
                 
Dilutive earnings per share
  $ 0.97     $ 0.30  
                 
 
The pro forma information is not necessarily indicative of the actual results that would have been achieved had the PCB Subsidiaries acquisition occurred as of January 1, 2010 and 2009, or the results that may be achieved in future periods.


78


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
(4)   Composition of Certain Consolidated Financial Statement Captions
 
                 
    December 31,  
    2010     2009  
    (In thousands)  
 
Inventories:
               
Raw materials
  $ 50,465     $ 21,758  
Work-in-process
    47,178       27,296  
Finished goods
    37,742       11,099  
                 
    $ 135,385     $ 60,153  
                 
Property, plant and equipment, net:
               
Land and land use rights
  $ 36,444     $ 9,156  
Buildings and improvements
    204,850       45,688  
Machinery and equipment
    477,886       137,058  
Construction-in-progress
    149,123       3,965  
Furniture and fixtures
    6,440       498  
Automobiles
    1,452       330  
                 
      876,195       196,695  
Less: Accumulated depreciation
    (135,565 )     (108,118 )
                 
    $ 740,630     $ 88,577  
                 
Other accrued expenses:
               
Interest
  $ 1,015     $ 711  
Restructuring charges
    416       529  
Income taxes payable
    9,252       180  
Other
    24,511       907  
                 
    $ 35,194     $ 2,327  
                 


79


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
(5)   Goodwill and Definite-lived Intangibles
 
As of December 31, 2010 and 2009 goodwill by operating segment and the components of definite-lived intangibles were as follows:
 
Goodwill
 
                         
    North
    Asia
       
    America     Pacific     Total  
    (In thousands)  
 
Balance as of December 31, 2009
                       
Goodwill
  $ 131,148     $     $ 131,148  
Accumulated impairment losses
    (117,018 )           (117,018 )
                         
      14,130             14,130  
                         
Goodwill acquired during the year
          183,267       183,267  
Foreign currency translation adjustment during the year
    502       (91 )     411  
                         
Balance as of December 31, 2010
                       
Goodwill
    131,650       183,176       314,826  
Accumulated impairment losses
    (117,018 )           (117,018 )
                         
    $ 14,632     $ 183,176     $ 197,808  
                         
 
                         
    North
    Asia
       
    America     Pacific     Total  
    (In thousands)  
 
Balance as of December 31, 2008
                       
Goodwill
  $ 131,167     $      —     $ 131,167  
Accumulated impairment losses
    (117,018 )           (117,018 )
                         
      14,149             14,149  
                         
Foreign currency translation adjustment during the year
    (19 )           (19 )
                         
Balance as of December 31, 2009
                       
Goodwill
    131,148             131,148  
Accumulated impairment losses
    (117,018 )           (117,018 )
                         
    $ 14,130     $     $ 14,130  
                         
 
During the fourth quarter of each year, the Company performs its annual goodwill impairment test. For the years ended December 31, 2010 and 2009, the Company performed its annual impairment test of goodwill and concluded that goodwill was not impaired. See Note 8 for additional information regarding the impairment of goodwill for the year ended December 31, 2008.


80


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
Definite-lived Intangibles
 
                                         
                            Weighted
 
                Foreign
    Net
    Average
 
    Gross
    Accumulated
    Currency
    Carrying
    Amortization
 
    Amount     Amortization     Rate Change     Amount     Period  
    (In thousands)     (years)  
 
December 31, 2010:
                                       
Strategic customer relationships
  $ 35,429     $ (24,017 )   $ 285     $ 11,697       12.0  
Licensing agreements
    350       (186 )           164       3.0  
Acquired intangibles from the acquisition of the PCB Subsidiaries:
                                       
Strategic customer relationships
    84,998       (7,912 )   $ (57 )   $ 77,029       8.0  
Trade name
    10,302       (1,313 )     (6 )     8,983       6.0  
Order backlog
    1,288       (1,286 )     (2 )           0.2  
                                         
    $ 132,367     $ (34,714 )   $ 220     $ 97,873          
                                         
 
                                         
                            Weighted
 
                Foreign
    Net
    Average
 
    Gross
    Accumulated
    Currency
    Carrying
    Amortization
 
    Amount     Amortization     Rate Change     Amount     Period  
    (In thousands)     (years)  
 
December 31, 2009:
                                       
Strategic customer relationships
  $ 35,429     $ (20,849 )   $ 251     $ 14,831       12.0  
Licensing agreement
    350       (70 )           280       3.0  
                                         
    $ 35,779     $ (20,919 )   $ 251     $ 15,111          
                                         
 
All of the definite-lived intangibles are amortized using the straight line method of amortization over the useful life, with the exception of the strategic customer relationship intangibles, which are amortized using an accelerated method of amortization based on estimated cash flows. Amortization expense was $13,795, $3,567 and $3,917 for the years ended December 31, 2010, 2009 and 2008, respectively. Amortization expense related to acquired licensing agreements is classified as cost of goods sold.
 
Estimated aggregate amortization for definite-lived intangible assets for the next five years is as follows:
 
         
    (In thousands)  
 
2011
  $ 17,458  
2012
    16,515  
2013
    15,520  
2014
    13,944  
2015
    12,469  
         
    $ 75,906  
         


81


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
(6)   Long-term Debt and Letters of Credit
 
The following table summarizes the long-term debt of the Company as of December 31, 2010. No long-term debt was outstanding at December 31, 2009.
 
                 
    Average Effective
       
    Interest Rate
       
    as of December 31,
    December 31,
 
    2010     2010  
    (In thousands)  
 
Bank loans, due various dates through May 2012
    3.39 %   $ 30,412  
Term loan due November 2013
    2.26 %     350,000  
Other
    6.00 %     20  
                 
              380,432  
Less Unamortized discount
            (314 )
                 
              380,118  
Less current maturities
            (67,123 )
                 
Long-term debt, less current maturities
          $ 312,995  
                 
 
The maturities of long-term debt through 2013 are as follows:
 
         
    (In thousands)  
 
2012
  $ 120,483  
2013
    192,504  
Thereafter
    8  
         
    $ 312,995  
         
 
Bank loans are made up of bank lines of credit in mainland China and are used for working capital and capital investment for the Company’s mainland China facilities acquired in conjunction with the acquisition of the PCB Subsidiaries. These facilities are denominated in either U.S. Dollars or Chinese Renminbi (RMB), with interest rates tied to either LIBOR or People’s Bank of China rates. These bank loans expire at various dates through May 2012.
 
On April 9, 2010, in conjunction with the acquisition of the PCB Subsidiaries, the Company became a party to a credit agreement (Credit Agreement), entered into on November 16, 2009 by certain PCB Subsidiaries. The Credit Agreement consists of a $350,000 senior secured term loan (Term Loan), a $87,500 senior secured revolving loan (Revolving Loan), a $65,000 factoring facility (Factoring Facility), and a $80,000 letters of credit facility (Letters of Credit Facility), all of which mature on November 16, 2013. The Credit Agreement is secured by substantially all of the assets of the PCB Subsidiaries, and is senior to all other Company debt including the Convertible Senior Notes. The Company has fully and unconditionally guaranteed the full and punctual payment of all obligations of the PCB Subsidiaries under the Credit Agreement.
 
Borrowings under the Credit Agreement bear interest at a floating rate of LIBOR (term election by Company) plus an applicable interest margin. Borrowings under the Term Loan will bear interest at a rate of LIBOR plus 2.0%, LIBOR plus 2.25% under the Revolving Loan, and LIBOR plus 1.25% under the Factoring Facility. There is no provision, other than an event of default, for these interest margins to increase. At December 31, 2010, the weighted average interest rate on the outstanding borrowings under the Credit Agreement was 2.26%.
 
The Company is required to make scheduled payments of the outstanding Term Loan balance beginning in 2011. All and any other outstanding balances under the Credit Agreement are due at the maturity date of November 16, 2013. Borrowings under the Credit Agreement are subject to certain financial and operating


82


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
covenants that include, among other provisions, limitations on dividends or other distributions, in addition to maintaining maximum total leverage ratios and minimum net worth, current assets, and interest coverage ratios at both the Company and PCB Subsidiaries level. On August 3, 2010, the Company entered into a waiver and amendment letter with The Hongkong and Shanghai Banking Corporation Limited, as Facility Agent for and on behalf of the other lenders named in the Credit Agreement, as amended March 30, 2010, which amended certain financial covenants applicable to the Company. Pursuant to the waiver and amendment letter, the lenders under the Credit Agreement agreed to amend the financial covenants related to consolidated tangible net worth, gearing ratio (the ratio of consolidated net borrowings to consolidated tangible net worth), and leverage. The Company is in compliance with the amended covenants.
 
The Company is also required to pay a commitment fee of 0.20% per annum on the unused portion of any loan or facility under the Credit Agreement. For the year ended December 31, 2010, the Company incurred $260 in commitment fees related to unused borrowing availability under the Credit Agreement. As of December 31, 2010, all of the Term Loan was outstanding, none of the Revolving Loan or Factoring Facility was outstanding, and $61,648 of the Letters of Credit Facility was outstanding. Available borrowing capacity under the Revolving Loan and Factoring Facility was $87,500 and $65,000, respectively, at December 31, 2010.
 
On April 9, 2010, the Company entered into an interest rate swap arrangement with an initial notional amount of $146,500, for the period beginning April 18, 2011 and ending on April 16, 2013. See Note 11.
 
Other Letters of Credit
 
In addition to the letters of credit obtained by the PCB Subsidiaries pursuant to the Credit Agreement, the Company maintains several unused letters of credit: a $1,994 standby letter of credit expiring December 31, 2011 associated with its insured workers compensation program; a $1,000 standby letter of credit expiring February 29, 2012 related to the lease of one of its production facilities; and various other letters of credit aggregating to approximately $378 related to purchases of machinery and equipment with various expiration dates through June 2011.
 
(7)   Convertible Senior Notes
 
In May 2008, the Company issued 3.25% Convertible Senior Notes (Convertible Notes) due May 15, 2015, in a public offering for an aggregate principal amount of $175,000. The Convertible Notes bear interest at a rate of 3.25% per annum. Interest is payable semiannually in arrears on May 15 and November 15 of each year. The Convertible Notes are senior unsecured obligations and rank equally to the Company’s future unsecured senior indebtedness and senior in right of payment to any of the Company’s future subordinated indebtedness. The liability and equity components of the Convertible Notes are separately accounted for in a manner that reflects the Company’s non-convertible debt borrowing rate when interest costs are recognized.
 
The Company received proceeds of $169,249 after the deduction of offering expenses of $5,751 upon issuance of the Convertible Notes. The Company has allocated the Convertible Notes offering costs to the liability and equity components in proportion to the allocation of proceeds and accounted for them as debt issuance costs and equity


83


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
issuance costs, respectively. At December 31, 2010 and 2009, the following summarizes the liability and equity components of the Convertible Notes:
 
                 
    December 31,
    December 31,
 
    2010     2009  
    (In thousands)  
 
Liability components:
               
Convertible Notes
  $ 175,000     $ 175,000  
Less: Convertible Notes unamortized discount
    (29,717 )     (35,118 )
                 
Convertible Notes, net of discount
  $ 145,283     $ 139,882  
                 
Equity components:
               
Additional paid-in capital:
               
Embedded conversion option — Convertible Notes
  $ 43,000     $ 43,000  
Embedded conversion option — Convertible Notes issuance costs
    (1,413 )     (1,413 )
                 
    $ 41,587     $ 41,587  
                 
 
At December 31, 2010 and, 2009, remaining unamortized debt issuance costs included in other non-current assets were $2,998 and $3,542, respectively. The debt issuance costs and debt discount are being amortized to interest expense over the term of the Convertible Notes using the effective interest rate method. At December 31, 2010, the remaining amortization period for the unamortized Convertible Note discount and debt issuance costs was 4.4 years.
 
The components of interest expense resulting from the Convertible Notes for the years ended December 31, 2010, 2009 and 2008 are as follows:
 
                         
    For the Year Ended December 31,  
    2010     2009     2008  
    (In thousands)  
 
Contractual coupon interest
  $ 5,688     $ 5,688     $ 3,560  
Amortization of Convertible Notes debt discount
    5,400       4,968       2,914  
Amortization of debt issuance costs
    545       502       294  
                         
    $ 11,633     $ 11,158     $ 6,768  
                         
 
For the years ended December 31, 2010, 2009 and 2008, the amortization of the Convertible Notes debt discount and debt issuance costs are based on an effective interest rate of 8.37%.
 
Conversion
 
At any time prior to November 15, 2014, holders may convert their Convertible Notes into cash and, if applicable, into shares of the Company’s common stock based on a conversion rate of 62.6449 shares of the Company’s common stock per $1 principal amount of Convertible Notes, subject to adjustment, under the following circumstances: (1) during any calendar quarter beginning after June 30, 2008 (and only during such calendar quarter), if the last reported sale price of our common stock for at least 20 trading days during the 30 consecutive trading days ending on the last trading day of the immediately preceding calendar quarter is greater than or equal to 130% of the applicable conversion price on each applicable trading day of such preceding calendar quarter; (2) during the five business day period after any 10 consecutive trading day period in which the trading price per note for each day of that 10 consecutive trading day period was less than 98% of the product of the last reported sale price of the Company’s common stock and the conversion rate on such day; or (3) upon the occurrence of specified corporate transactions described in the prospectus supplement. As of December 31, 2010, none of the conversion criteria had been met.


84


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
On or after November 15, 2014 until the close of business on the third scheduled trading day preceding the maturity date, holders may convert their notes at any time, regardless of the foregoing circumstances. Upon conversion, for each $1 principal amount of notes, the Company will pay cash for the lesser of the conversion value or $1 and shares of our common stock, if any, based on a daily conversion value calculated on a proportionate basis for each day of the 60 trading day observation period. Additionally, in the event of a fundamental change as defined in the prospectus supplement, or other conversion rate adjustments such as share splits or combinations, other distributions of shares, cash or other assets to stockholders, including self-tender transactions (Other Conversion Rate Adjustments), the conversion rate may be modified to adjust the number of shares per $1 principal amount of the notes. As of December 31, 2010, none of the criteria for a fundamental change or a conversion rate adjustment had been met.
 
The maximum number of shares issuable upon conversion, including the effect of a fundamental change and subject to Other Conversion Rate Adjustments, would be 13,978.
 
Note Repurchase
 
The Company is not permitted to redeem the Convertible Notes at any time prior to maturity. In the event of a fundamental change or certain default events, as defined in the prospectus supplement, holders may require the Company to repurchase for cash all or a portion of their Convertible Notes at a price equal to 100% of the principal amount, plus any accrued and unpaid interest.
 
Convertible Note Hedge and Warrant Transaction
 
In connection with the issuance of the Convertible Notes, the Company entered into a convertible note hedge and warrant transaction (Call Spread Transaction), with respect to the Company’s common stock. The convertible note hedge, which cost an aggregate of $38,257 and was recorded, net of tax, as a reduction of additional paid-in capital, consists of the Company’s option to purchase up to 10,963 shares of common stock at a price of $15.96 per share. This option expires on May 15, 2015 and can only be executed upon the conversion of the above mentioned Convertible Notes. Additionally, the Company sold warrants to purchase 10,963 shares of its common stock at a price of $18.15 per share. The warrants expire ratably beginning August 2015 through February 2016. Proceeds from the sale of warrants of $26,197 were recorded as an addition to additional paid-in capital. The Call Spread Transaction has no effect on the terms of the Convertible Notes and reduces potential dilution by effectively increasing the conversion price of the Convertible Notes to $18.15 per share of the Company’s common stock.
 
(8)   Impairment of Long-lived Assets and Goodwill
 
Impairment of Long-lived Assets
 
                         
    For the Year Ended December 31,  
    2010     2009     2008  
    (In thousands)  
 
North America
                       
Plant Closures:
                       
Los Angeles, California
  $     $ 7,457     $  
Redmond, Washington
          737       1,808  
Hayward, California
          192       2,746  
Assets held for sale:
                 
Redmond, Washington
          2,125        
Dallas, Oregon
    766       2,250       1,750  
                         
    $ 766     $ 12,761     $ 6,304  
                         


85


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
For the years ended December 31, 2010, 2009 and 2008 the Company reduced the carrying value of the Dallas, Oregon facility, which was classified as an asset held for sale in a prior period, to record the estimated fair value less costs to sell, resulting in an impairment of $766, $2,250 and $1,750, respectively, due to a depressed real estate market in the surrounding Dallas, Oregon region. During the year ended December 31, 2010, the Dallas Oregon facility was sold for $234.
 
For the years ended December 31, 2009 and 2008, the Company recorded the impairment of certain long-lived assets for its Redmond, Washington, Los Angeles and Hayward, California facilities resulting from announced facility closures. These charges are presented as impairment of goodwill and long-lived assets in the Company’s consolidated statement of operations.
 
During the year ended 2009, the Company commenced the process of selling the buildings at the Redmond, Washington facility and classified the buildings as assets held for sale and recognized at the lesser of carrying value or fair value less costs to sell. As of December 31, 2010, all of the buildings at the Redmond, Washington facility were sold for amounts approximating carrying value.
 
Impairment of Goodwill
 
For the year ended December 31, 2008, the Company recorded an impairment of goodwill in the amount of $117,018 for its North America operating segment when its carrying value exceeded its fair value, which resulted from the Company’s annual goodwill impairment test. In conjunction with the testing, the Company considered factors such as a weakening economy, reduced expectations for future cash flows coupled with a decline in the market price of the Company’s stock and market capitalization for a sustained period, as indicators for potential goodwill impairment.
 
In performing the impairment test for the year ended December 31, 2008, the fair value of the Company’s reporting units is determined using a combination of the income approach and the market approach as considered necessary. Under the income approach, the fair value of each reporting unit is calculated based on the present value of estimated future net cash flows. Under the market approach, fair value is estimated based on market multiples of earnings or similar measures for comparable companies and market transactions, when available.
 
(9)   Restructuring Charges
 
The Company has recorded total restructuring costs of $389 and $5,490, consisting of employee separation and contract termination costs for the year ended December 31, 2010 and 2009, respectively, which have been classified as restructuring charges in the consolidated statement of operations. The Company also recorded other exit costs of $3,350 related to inventory write-downs for the year ended December 31, 2009, which has been recorded as a component of cost of goods sold in the consolidated statement of operations.
 
In September 2009 the Company announced its plan to close its Hayward and Los Angeles, California facilities and lay off approximately 340 employees at these sites. As a result, the Company recorded $2,284 in separation costs and $2,637 in inventory write-off costs for the year ended December 31, 2009 related to this restructuring. As of December 31, 2010, all accrued separation costs related to this restructuring have been paid. Long-lived asset impairments of $7,649 were also recognized as a result of the Hayward and Los Angeles, California restructuring plan. See Note 8.
 
During the years ended December 31, 2010 and 2009, the Company incurred $399 and $529 in contract termination costs, respectively, related to building operating leases associated with the closure of its Hayward and Los Angeles, California facilities, which the Company ceased use. These accrued contract termination costs are included as a component of other accrued expenses in the consolidated balance sheet.
 
The Hayward and Los Angeles, California facilities were part of the Company’s North America operating segment.


86


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
The below table shows the utilization of the accrued restructuring costs during the year ended December 31, 2010 and 2009:
 
                         
          Contract
       
    Severance     Termination     Total  
    (In thousands)  
 
Accrued at December 31, 2008
  $     $     $  
Estimated liabilities
    2,332       529       2,861  
Adjustment
    (48 )           (48 )
Amount paid
    (1,582 )           (1,582 )
                         
Accrued at December 31, 2009
    702       529       1,231  
Estimated liabilities
          399       399  
Change in estimates
    50       (60 )     (10 )
Amount paid
    (752 )     (452 )     (1,204 )
                         
Accrued at December 31, 2010
  $     $ 416     $ 416  
                         
 
In January 2009, the Company announced its plan to close its Redmond, Washington facility and lay off approximately 370 employees at this site. In addition, the Company laid off about 140 employees at various other U.S. facilities in January 2009. As a result, the Company recorded $2,677 in separation costs and $713 in inventory write-off costs related to this restructuring for the year ended December 31, 2009. As of December 31, 2009, the Redmond, Washington facility had been closed, all employees related to the January 2009 restructuring had been separated, and all accrued separation costs had been paid. The Redmond, Washington facility was part of the Company’s North America operating segment. Long-lived asset impairments of $737 were also recognized as a result of the Redmond, Washington restructuring plan. See Note 8.
 
(10)   Income Taxes
 
The components of income (loss) before income taxes for the years ended December 31, 2010, 2009 and 2008 are:
 
                         
    2010     2009     2008  
    (In thousands)  
 
United States
  $ 32,275     $ (1,040 )   $ (69,987 )
Foreign
    76,362       9,163       8,616  
                         
Income (loss) before income taxes
  $ 108,637     $ 8,123     $ (61,371 )
                         
 
The Company’s foreign earnings attributable to the Asia Pacific operating segment will be permanently reinvested in such foreign jurisdictions and, therefore, no deferred tax liabilities for U.S. income taxes on undistributed earnings are recorded.


87


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
The components of income tax (provision) benefit for the years ended December 31, 2010, 2009 and 2008 are:
 
                         
    2010     2009     2008  
    (In thousands)  
 
Current (provision) benefit:
                       
Federal
  $ 90     $ (3,536 )   $ (9,755 )
State
    (409 )     (1,721 )     (2,203 )
Foreign
    (12,215 )     (2,839 )     (1,625 )
                         
Total current
    (12,534 )     (8,096 )     (13,583 )
                         
Deferred (provision) benefit:
                       
Federal
    (12,640 )     3,419       32,335  
State
    (2,045 )     1,313       5,634  
Foreign
    (1,519 )     98       74  
                         
Total deferred
    (16,204 )     4,830       38,043  
                         
Total (provision) benefit
  $ (28,738 )   $ (3,266 )   $ 24,460  
                         
 
The following is a reconciliation between the statutory federal income tax rates and the Company’s effective income tax rates for the years ended December 31, 2010, 2009 and 2008, which are derived by dividing the income tax (provision) benefit by the income (loss) before income taxes:
 
                         
    2010     2009     2008  
 
Statutory federal income tax rate
    (34.0 )%     (34.0 )%     35.0 %
State income taxes, net of federal benefit and state tax credits
    (1.5 )     (3.3 )     3.6  
Domestic production activities deduction
    0.1       1.5       1.1  
Foreign tax differential on foreign earnings
    11.4              
Other
    (2.5 )     (4.4 )     0.2  
                         
Total (provision) benefit for income taxes
    (26.5 )%     (40.2 )%     39.9 %
                         


88


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. The significant components of the net deferred income tax assets as of December 31, 2010 and 2009 are as follows:
 
                 
    2010     2009  
    (In thousands)  
 
Deferred income tax assets:
               
Goodwill and intangible amortization
  $ 13,015     $ 32,568  
Reserves and accruals
    7,236       5,794  
Net operating loss carryforwards
    14,147       4  
State tax credit carryforwards, net of federal benefit
    3,506       3,017  
Stock-based compensation
    2,872       2,728  
Original issue discount on Convertible Notes
    9,808       11,852  
Property, plant and equipment basis differences
    6,849       3,712  
Other deferred income tax assets
    1,600       2,627  
                 
      59,033       62,302  
Less valuation allowance
    (19,285 )      
                 
      39,748       62,302  
Deferred income tax liabilities:
               
Discount on senior convertible notes
    (11,174 )     (13,432 )
Unrealized gain on currency translation
    (1,821 )     (1,853 )
Repatriation of foreign earnings
    (8,420 )     (2,942 )
                 
Net deferred income tax assets
  $ 18,333     $ 44,075  
                 
Deferred income tax assets, net:
               
Current deferred income taxes
  $ 7,208     $ 6,645  
Noncurrent deferred income taxes
    11,125       37,430  
 
At December 31, 2010 the Company’s foreign and multiple state net operating loss carryforwards for income tax purposes were approximately $59,206 and $67, respectively and if not utilized, the state and foreign net operating loss carryforwards will begin to expire in 2011 and 2018, respectively. At December 31, 2010, the Company’s state tax credit carryforwards were approximately $5,394 and have no expiration date.
 
A valuation allowance is provided when it is more likely than not that all or some portion of the deferred income tax assets will not be realized. Certain subsidiaries within the Asia Pacific segment have net operating loss caryforwards in various tax jurisdictions that the Company has determined are not more likely than not to be utilized. Based on historical performance and future expectations of these subsidiaries, the Company does not anticipate sufficient taxable income to utilize these net operating loss carryforwards. As a result, a full valuation allowance has been recorded for these subsidiaries at December 31, 2010. For the net deferred income tax asset, management has determined that it is more likely than not that the results of future operations will generate sufficient taxable income to realize the net deferred tax asset.
 
Certain entities within the Asia Pacific segment have operated under tax holidays in China, which were effective through December 31, 2010. The impact of the China tax holidays decreased China taxes by $5,650 and increased both basic and dilutive earnings per share by $0.08 for the year ended December 31, 2010.


89


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
A reconciliation of the beginning and ending amount of unrecognized tax benefits, exclusive of accrued interest and penalties, is as follows:
 
                         
    2010     2009     2008  
    (In thousands)  
 
Balance at January 1
  $ 112     $ 95     $ 346  
Additions based on tax positions related to the current year
                 
Additions for tax positions of prior years
          17        
Reductions for tax positions of prior years
                 
Lapse of statute
                (251 )
Settlements
                 
                         
Balance at December 31
  $ 112     $ 112     $ 95  
                         
 
At December 31, 2010 and 2009, the Company classified $144 and $138, respectively, of total unrecognized tax benefits, which include accrued interest and penalties of $32 and $26, net of tax benefits for 2010 and 2009, respectively, as a component of other long-term liabilities. The amount of unrecognized tax benefits that would, if recognized, reduce the Company’s effective income tax rate in any future periods is $73. The Company does not expect its unrecognized tax benefits to change significantly over the next 12 months.
 
The Company and its subsidiaries are subject to U.S. federal, state, local, and/or foreign income tax, and in the normal course of business its income tax returns are subject to examination by the relevant taxing authorities. As of December 31, 2010, the 2002 — 2009 tax years remain subject to examination in the U.S. federal tax, various state tax and foreign jurisdictions.
 
(11)   Financial Instruments
 
Derivatives
 
Interest Rate Swaps
 
The Company’s business is exposed to interest rate risk resulting from fluctuations in interest rates on certain variable rate LIBOR debt. Increases in interest rates would increase interest expenses relating to the outstanding variable rate borrowings of certain foreign subsidiaries and increase the cost of debt. Fluctuations in interest rates can also lead to significant fluctuations in the fair value of the debt obligations.
 
On April 9, 2010, the Company entered into a two-year pay-fixed, receive floating (1-month LIBOR), amortizing interest rate swap arrangement with an initial notional amount of $146,500, for the period beginning April 18, 2011 and ending on April 16, 2013. The interest rate swap will apply a fixed interest rate against the first interest payments of a portion of the $350,000 Term Loan over the term of the interest rate swap. As part of the Company’s risk management strategy, the Company chose not to hedge its initial year interest payment cash flows of its Term Loan because of low current LIBOR rates which would have initially resulted in locking in a fixed rate higher than LIBOR spot rate at the onset.
 
The notional amount of the interest rate swap decreases to zero over its term, consistent with the Company’s risk management objectives. The notional value underlying the hedge at December 31, 2010 was $146,500. Under the terms of the interest rate swap, the Company will pay a fixed rate of 2.50% and will receive floating 1-month LIBOR during the swap period. The Company has designated this interest rate swap as a cash flow hedge.
 
At inception, the fair value of the interest rate swap was zero. As of December 31, 2010, the fair value of the swap was recorded as a liability of $3,421 in other long-term liabilities. The change in the fair value of the interest rate swap is recorded as a component of accumulated other comprehensive income, net of tax, in the Company’s consolidated balance sheet. No ineffectiveness was recognized for the year ended December 31, 2010. There was no


90


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
impact to interest expense for the year ending December 31, 2010 as the interest rate swap does not hedge interest rate cash flows until the period beginning April 18, 2011.
 
Additionally, the Company, through its acquisition of the PCB Subsidiaries, assumed a long term pay-fixed, receive floating (1-month LIBOR), amortizing interest rate swap arrangement with an initial notional amount of $40,000, for the period beginning October 8, 2008 and ending on July 30, 2012. This interest rate swap applied to the PCB Subsidiaries’ pre-acquisition, long-term borrowings, which were paid-off on the acquisition date. The notional amount of the interest rate swap decreases to zero over its term. Under the terms of the interest rate swap, the Company will pay a fixed rate of 3.43% and will receive floating 1-month LIBOR during the swap period. As the borrowings attributable to this interest rate swap were paid off upon acquisition, the Company did not designate this interest rate swap as a cash flow hedge. As of December 31, 2010, the fair value of the swap was recorded as a liability of $1,206 in other long-term liabilities. The change in the fair value of this interest rate swap is recorded as other, net in the consolidated statement of operations.
 
Foreign Exchange Contracts
 
The Company enters into foreign currency forward contracts to mitigate the impact of changes in foreign currency exchange rates and to reduce the volatility of purchases and other obligations generated in currencies other than the functional currencies. Our foreign subsidiaries may at times purchase forward exchange contracts to manage their foreign currency risks in relation to particular purchases or obligations, such as the related party financing obligation arising from the put call option to purchase the remaining 20% of a majority owned subsidiary in 2013 (Note 3), and certain purchases of machinery denominated in foreign currencies other than the Company’s foreign functional currency. The notional amount of the foreign exchange contracts at December 31, 2010 was approximately $36,266. The Company did not have any foreign exchange contracts as of December 31, 2009. The Company has designated certain of these foreign exchange contracts as cash flow hedges, with the exception of the foreign exchange contracts in relation to the related party financing obligation. In this instance, the hedged item is a recognized liability subject to foreign currency transaction gains and losses and, therefore, changes in the hedged item due to foreign currency exchange rates are already recorded in earnings. Therefore, hedge accounting has not been applied.


91


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
The Company only had derivative instruments during the year ended December 31, 2010. The fair values of derivative instruments in the consolidated balance sheet are as follows:
 
             
        Asset /
 
        (Liability)
 
        Fair Value
 
        December 31,
 
    Balance Sheet Location   2010  
        (In thousands)  
 
Cash flow derivative instruments designated as hedges:
           
Foreign exchange contracts
  Deposits and other non-current assets   $ 9  
Foreign exchange contracts
  Other accrued expenses     (1 )
Foreign exchange contracts
  Other long-term liabilities     (272 )
Interest rate swap
  Other long-term liabilities     (3,421 )
Cash flow derivative instruments not designated as hedges:
           
Foreign exchange contracts
  Prepaid expenses and other current assets     482  
Foreign exchange contracts
  Other accrued expenses     (4 )
Foreign exchange contracts
  Deposits and other non-current assets     728  
Interest rate swap
  Other long-term liabilities     (1,206 )
             
        $ (3,685 )
             
 
The following tables provide information about the amounts recorded in accumulated other comprehensive income related to derivatives designated as cash flow hedges, as well as the amounts recorded in each caption in the consolidated statement of operations when derivative amounts are reclassified out of accumulated other comprehensive income:
 
                             
        For the Year Ended December 31, 2010  
        Effective Portion     Ineffective Portion  
        Gain/ (Loss)
    Gain/ (Loss)
    Gain/ (Loss)
 
        Recognized in Other
    Reclassified into
    Recognized into
 
    Financial Statement Caption   Comprehensive Income     Income     Income  
    (In thousands)  
 
Cash flow hedge:
                           
Interest rate swap
  Interest expense   $ (3,421 )   $     $  
Foreign currency forward
  Other, net     (264 )            
                             
        $ (3,685 )   $     $  
                             
 
The following provides a summary of the activity associated with the designated cash flow hedges reflected in accumulated other comprehensive income for the year ended December 31, 2010:
 
         
    December 31, 2010  
    (In thousands)  
 
Beginning balance, net of tax
  $  
Changes in fair value loss, net of tax
    (3,121 )
Reclassification to earnings, net of tax
     
         
Ending balance, net of tax
  $ (3,121 )
         


92


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
The amounts recorded in accumulated other comprehensive income for the cash flow hedge related to the interest rate swap are reclassified into interest expense during the operative period of the swap, beginning April 18, 2011 and ending on April 16, 2013, and in the same period in which the related interest on the floating-rate debt obligation affects earnings. The Company expects that approximately $1,580 will be reclassified into the statement of operations, net of tax, in the next 12 months.
 
The net gain recognized in other, net in the consolidated statement of operations on derivative instruments not designated as hedges is as follows:
 
         
    Year Ended
 
    December 31,
 
    2010  
    (In thousands)  
 
Derivative instruments not designated as hedges:
       
Interest rate swap
  $ 489  
Foreign exchange contracts
    437  
         
    $ 926  
         
 
Other Financial Instruments
 
The carrying amount and estimated fair value of the Company’s financial instruments at December 31, 2010 and 2009 were as follows:
 
                                 
    December 31, 2010   December 31, 2009
    Carrying
  Fair
  Carrying
  Fair
    Amount   Value   Amount   Value
    (In thousands)
 
Short-term investments
  $     $     $ 1,351     $ 1,351  
Short-term derivative assets
    482       482              
Short-term derivative liabilities
    5       5              
Noncurrent derivative assets
    737       737              
Long-term derivative liabilities
    4,899       4,899              
Long-term equity investment
    2,714       2,280              
Related party financing obligation
    20,399       20,791              
Long-term debt
    380,118       370,812              
Convertible senior notes
    145,283       207,508       139,882       174,340  
 
The fair value of the derivative instruments was determined using pricing models developed based on the LIBOR swap rate, foreign currency exchange rates, and other observable market data, including quoted market prices, as appropriate. The values were adjusted to reflect nonperformance risk of both the counterparty and the Company.
 
The fair value of equity securities accounted for under the cost method (nonmarketable equity securities) was determined using market multiples derived from comparable companies. Under that approach, the identification of comparable companies requires significant judgment. Additionally, multiples might lie in ranges with a different multiple for each comparable company. The selection of where the appropriate multiple falls within that range also requires significant judgment, considering both qualitative and quantitative factors.
 
The related party financing obligation fair value was estimated based on the minimum price of the obligation plus 2.5% interest discounted at the liability’s discount rate based on the Company’s adjusted cost of borrowing.


93


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
The fair value of the long-term debt was estimated based on discounting the par value of the debt over its life for the difference between the debt stated interest rate and current market rates for similar debt at December 31, 2010.
 
The fair value of the convertible senior notes was estimated based on quoted market prices.
 
The fair value of short-term investments was estimated based on a court order issued by a U.S. District Court prescribing amounts to be distributed which resulted in sufficient information available to determine the investment fair value.
 
At December 31, 2010 and 2009, the Company’s financial instruments included cash and cash equivalents, short-term investments, restricted cash, accounts receivable, notes receivable, accounts payable and equipment payables. Due to short-term maturities, the carrying amount of these instruments approximates fair value.
 
Concentration of Credit Risk
 
In the normal course of business, the Company extends credit to its customers, which are concentrated primarily in the computer and electronics instrumentation and aerospace/defense industries, and most of which are located outside the United States. The Company performs ongoing credit evaluations of customers and does not require collateral. The Company also considers the credit risk profile of the entity from which the receivable is due in further evaluating collection risk.
 
As of December 31, 2010 and 2009, the Company’s 10 largest customers in the aggregate accounted for 53% and 57%, respectively, of total accounts receivable. If one or more of the Company’s significant customers were to become insolvent or were otherwise unable to pay for the manufacturing services provided, it would have a material adverse effect on the Company’s financial condition and results of operations.
 
(12)   Fair Value Measures
 
The Company measures at fair value its financial and non-financial assets by using a fair value hierarchy that prioritizes the inputs to valuation techniques used to measure fair value. Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date, essentially an exit price, based on the highest and best use of the asset or liability.
 
At December 31, 2010 and 2009, the following financial assets and liabilities were measured at fair value on a recurring basis using the type of inputs shown:
 
                                 
    December 31,
    Fair Value Measurements Using:  
    2010     Level 1 Inputs     Level 2 Inputs     Level 3 Inputs  
    (In thousands)  
 
Cash equivalents
  $ 66,742     $ 66,742              
Foreign exchange derivative assets
    1,219             1,219        
Interest rate swap derivative liabilities
    4,627             4,627        
Foreign exchange derivative liabilities
    277             277        
 
                                 
    December 31,
    Fair Value Measurements Using:  
    2009     Level 1 Inputs     Level 2 Inputs     Level 3 Inputs  
    (In thousands)  
 
Cash equivalents
  $ 70,794     $ 70,794              
Short-term investments
    1,351                   1,351  
Restricted cash
    120,000       120,000              
 
There were no transfers of financial assets or liabilities between Level 1 and Level 2 inputs for the years ended December 31, 2010 and 2009.


94


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
The following is a summary of activity for fair value measurements using Level 3 inputs for the years ended December 31, 2010, 2009 and 2008:
 
                         
    For the Years Ended December 31,  
Fair Value Measurement using Significant Unobservable Inputs (Level 3)
  2010     2009     2008  
    (In thousands)  
 
Beginning balance
  $ 1,351     $ 3,657     $  
Transfers to level 3
                20,101  
Settlement
    (1,351 )     (2,631 )     (15,865 )
Changes in fair value included in earnings
          325       (579 )
                         
Ending balance
  $     $ 1,351     $ 3,657  
                         
 
The changes in fair value included in earnings for the years ended December 31, 2009 and 2008 have been included in other, net in the consolidated statement of operations.
 
The majority of the Company’s non-financial instruments, which include goodwill, intangible assets, inventories, and property, plant and equipment, are not required to be carried at fair value on a recurring basis. However, if certain triggering events occur (or tested at least annually for goodwill) such that a non-financial instrument is required to be evaluated for impairment, based upon a comparison of the non-financial instrument’s fair value to its carrying value, an impairment is recorded to reduce the carrying value to the fair value, if the carrying value exceeds the fair value.
 
For the years ended December 31, 2010 and 2009, the following non-financial instruments were measured at fair value on a nonrecurring basis using the type of inputs shown:
 
                                         
    Fair Value Measurements Using:
                    Total Losses for
    December 31,
  Level 1
  Level 2
  Level 3
  the Year Ended
    2010   Inputs   Inputs   Inputs   December 31, 2010
    (In thousands)
 
Asset held for sale
                          $ 766  
                                         
 
                                         
    Fair Value Measurements Using:  
                            Total Losses for
 
    December 31,
    Level 1
    Level 2
    Level 3
    the Year Ended
 
    2009     Inputs     Inputs     Inputs     December 31, 2009  
    (In thousands)  
 
Long-lived assets held and used
  $ 1,516           $ 1,516           $ 8,386  
Asset held for sale
    7,875             7,875             4,375  
Asset retirement obligation
    691                 $ 691        
                                         
                                    $ 12,761  
                                         
 
For the years ended December 31, 2010, 2009 and 2008 the Company reduced the carrying value of the Dallas, Oregon facility, which was classified as an asset held for sale in a prior period, to record the estimated fair value less costs to sell, due to a depressed real estate market in the surrounding Dallas, Oregon region. During the year ended December 31, 2010, the Dallas Oregon facility was sold. See Note 8.
 
For the year ended December 31, 2009, the fair values of long-lived assets held and used and the asset held for sale were primarily determined using appraisals and comparable prices of similar assets, which are considered to be Level 2 inputs. Additionally, the Company estimates liabilities for the costs of asset retirement obligations when a legal or contractual obligation exists to dispose of or restore an asset upon its retirement and the timing and cost of such work can be reasonably estimated. The Company capitalizes the associated asset retirement costs as part of the


95


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
carrying amount of the long-lived asset. The initial liability and subsequent adjustments due to changes in the amount or timing of the estimated cash flows are measured at fair value based on the present value of estimated cash flows using the Company’s credit-adjusted, risk-free interest rate. During 2009, an adjustment was recorded to the estimated asset retirement obligation and related assets for the Hayward and Los Angeles, California manufacturing facilities to restore the Company’s leased manufacturing facilities to shell condition due to changes in the expected timing and amount of cash flows. Because the primary determination of fair value was based on management’s assumptions and estimates of costs to dispose of or restore an asset, the resulting fair value is considered a Level 3 input.
 
(13)   Commitments and Contingencies
 
Operating Leases
 
The Company leases some of its manufacturing and assembly plants, a sales office and equipment under noncancellable operating leases that expire at various dates through 2020. Certain real property leases contain renewal provisions at the Company’s option. Most of the leases require the Company to pay for certain other costs such as property taxes and maintenance. Certain leases also contain rent escalation clauses (step rents) that require additional rental amounts in the later years of the term. Rent expense for leases with step rents is recognized on a straight-line basis over the minimum lease term.
 
The following is a schedule of future minimum lease payments as of December 31, 2010:
 
         
    Operating Leases  
    (In thousands)  
 
2011
  $ 1,634  
2012
    750  
2013
    371  
2014
    237  
2015
    226  
Thereafter
    997  
         
Total minimum lease payments
  $ 4,215  
         
 
Total rent expense for the years ended December 31, 2010, 2009 and 2008 was approximately $3,129, $4,503, and $4,598, respectively.
 
Legal Matters
 
The Company is subject to various other legal matters, which it considers normal for its business activities. While the Company currently believes that the amount of any ultimate potential loss for known matters would not be material to the Company’s financial condition, the outcome of these actions is inherently difficult to predict. In the event of an adverse outcome, the ultimate potential loss could have a material adverse effect on the Company’s financial condition or results of operations in a particular period. The Company has accrued amounts for its loss contingencies which are probable and estimable at December 31, 2010 and 2009. However, these amounts are not material to the consolidated financial statements.
 
Environmental Matters
 
The process to manufacture PCBs requires adherence to city, county, state, federal and foreign jurisdiction environmental regulations regarding the storage, use, handling and disposal of chemicals, solid wastes and other hazardous materials as well as air quality standards. Management believes that its facilities comply in all material respects with environmental laws and regulations. The Company has in the past received certain notices of


96


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
violations and has implemented certain required minor corrective activities. There can be no assurance that violations will not occur in the future.
 
The Company is involved in various stages of investigation and cleanup in Connecticut related to environmental remediation matters for two of the sites and has investigated a third site. The ultimate cost of site cleanup is difficult to predict given the uncertainties regarding the extent of the required cleanup, the interpretation of applicable laws and regulations, and alternative cleanup methods. The third Connecticut site was investigated under Connecticut’s Land Transfer Act and no contamination above applicable standards was found. The Company concluded that it was probable that it would incur remediation and monitoring costs for these sites of approximately $558 and $720 as of December 31, 2010 and 2009, respectively, the liability for which is included in other long-term liabilities. The Company estimates that it will incur the remediation costs over the next 12 to 84 months. This accrual was discounted at 8% per annum to determine the Company’s best estimate of the liability, which the Company estimated as ranging from $839 to $1,274 on an undiscounted basis.
 
The liabilities recorded do not take into account any claims for recoveries from insurance or third parties and none are anticipated. These costs are mostly comprised of estimated consulting costs to evaluate potential remediation requirements, completion of the remediation, and monitoring of results achieved. Subject to the imprecision in estimating future environmental remediation costs, the Company does not expect the outcome of the environmental remediation matters, either individually or in the aggregate, to have a material adverse effect on its financial position, results of operations, or cash flows.
 
(14)   Stock-Based Compensation
 
Incentive Compensation Plan
 
In 2006, the Company adopted the 2006 Incentive Compensation Plan (the Plan) which allows for the issuance of up to 6,873 shares through its expiration date of June 22, 2016.
 
The Plan provides for the grant of incentive stock options and nonqualified stock options to our key employees, non-employee directors and consultants. Other types of awards such as performance-based restricted stock units (PRUs), stock restricted stock units (RSUs), and stock appreciation rights are also permitted. The exercise price for options and awards is determined by the compensation committee of the Board of Directors and, for options intended to qualify as incentive stock options, may not be less than the fair market value as determined by the closing stock price at the date of the grant. Each option and award shall vest and expire as determined by the compensation committee, with options, PRUs and RSUs generally vesting over three years for employees and one year for non-employee directors and do not have voting rights. Options expire no later than ten years from the grant date. All grants provide for accelerated vesting if there is a change in control, as defined in the Plan. Upon the exercise of outstanding stock options or vesting of RSUs and PRUs, the Company’s practice is to issue new registered shares that are reserved for issuance under the Plan.
 
As of December 31, 2010, 58 PRUs, 1,318 RSUs and 1,691 stock options were outstanding under the Plan. Included in the 1,318 RSUs outstanding as of December 31, 2010 are 82 vested but not yet released associated with non-employee directors RSUs which vest over one year with release of the underlying shares of common stock deferred until retirement from the board of directors.
 
Performance-based Restricted Stock Units
 
On March 25, 2010, the Company implemented a new long-term incentive program for executives that provides for the issuance of PRUs, representing hypothetical shares of the Company’s common stock that may be issued. Under the PRU program, a target number of PRUs is awarded at the beginning of each three-year performance period. The number of shares of our common stock released at the end of the performance period will range from zero to 2.4 times the target number depending on performance during the period. The performance metrics of the PRU program are based on (a) annual financial targets, which for the first one-third of the 2010 grant


97


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
were based on revenue and EBITDA (earnings before interest, tax, depreciation, and amortization expense), each equally weighted, and (b) an overall modifier based on the Company’s total stockholder return (TSR) relative to the S&P SmallCap 600 over the three-year performance period.
 
Under the PRU program, financial goals are set at the beginning of each fiscal year and performance is reviewed at the end of that year. The percentage to be applied to each participant’s target award ranges from zero to 160% based upon the extent to which the annual financial performance goals are achieved. If specific performance threshold levels for the annual financial goals are met, the amount earned for that element will be applied to one-third of the participants’ PRU award to determine the number of units earned.
 
At the end of the three-year performance period, the total units earned, if any, are adjusted by applying a modifier, ranging from zero to 150% based on the Company’s TSR based on stock price changes relative to the TSR of S&P SmallCap 600 companies for the same three-year period.
 
The TSR modifier is intended to ensure that there are limited or no payouts under the PRU program if the Company’s stock performance is significantly below the median TSR of S&P SmallCap 600 companies for the three-year performance period. Where the annual financial goals have been met and where there has been strong relative TSR performance over the three-year performance period, the PRU program may provide substantial rewards to participants with a maximum payout of 2.4 times the initial PRU award. However, even if all of the annual financial metric goals are achieved in each of the three years, there will be no payouts if the Company’s stock performance is below that of the 20th percentile of S&P SmallCap 600 companies.
 
Recipients of PRU awards generally must remain employed by the Company on a continuous basis through the end of the three-year performance period in order to receive any amount of the PRUs covered by that award. Target shares subject to PRU awards do not have voting rights of common stock until earned and issued following the end of the three-year performance period.
 
During the year ended December 31, 2010, the Company granted 48 PRUs, representing the first one-third of the 143 target PRUs, with an estimated weighted average fair value per unit of $10.11 at the date of grant. The fair value for PRUs granted is calculated using the Monte Carlo simulation model, as the TSR modifier contains a market condition. For the year ended December 31, 2010 the following assumptions were used in determining the fair value:
 
         
    December 31,
 
    2010  
 
Risk-free interest rate
    1.3 %
Dividend yield
     
Expected volatility
    65 %
Expected term in months
    33  
 
The expected term of the PRUs reflects the performance period for the PRUs granted on March 25, 2010. Expected volatility is calculated using the Company’s historical stock price to calculate expected volatility over the expected term of each grant. The risk-free interest rate for the expected term of PRUs is based on the U.S Treasury yield curve in effect at the time of grant.


98


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
PRUs activity for the year ended December 31, 2010 was as follows:
 
     
    Shares
    (In thousands)
 
Outstanding target share at December 31, 2009
 
Granted
  48
Vested
 
Change in units due to annual performance and market condition achievement
  7
Forfeited
 
     
Outstanding target shares at December 31, 2010
  55
     
 
Restricted Stock Units
 
RSU activity for the year ended December 31, 2010 was as follows:
 
                 
          Weighted
 
          Average
 
          Grant-Date
 
    Shares     Fair Value  
    (In thousands)        
 
Non-vested RSUs outstanding at December 31, 2009
    1,125     $ 7.16  
Granted
    742       9.61  
Vested
    (559 )     8.17  
Forfeited
    (72 )     7.13  
                 
Non-vested RSUs outstanding at December 31, 2010
    1,236     $ 8.17  
                 
Vested and expected to vest at December 31, 2010
    1,289     $ 8.35  
                 
 
The fair value of the Company’s RSUs is determined based upon the closing common stock price on the grant date. The total fair value of RSUs vested for the years ended December 31, 2010, 2009 and 2008 was $4,562, $3,704 and $1,934, respectively.
 
Stock Options
 
Stock option awards granted were estimated to have a weighted average fair value per share of $7.17, $4.95 and $6.81 for the years ended December 31, 2010, 2009 and 2008, respectively. The fair value calculation is based on stock options granted during the period using the Black-Scholes option-pricing model on the date of grant. For the years ended December 31, 2010, 2009 and 2008 the following weighted average assumptions were used in determining the fair value:
 
                         
    2010   2009   2008
 
Risk-free interest rate
    2.5 %     2.4 %     2.9 %
Dividend yield
    %     %     %
Expected volatility
    68 %     60 %     69 %
Expected term in months
    96       66       66  
 
The Company determines the expected term of its stock option awards by periodic review of its historical stock option exercise experience. This calculation excludes pre-vesting forfeitures and uses assumed future exercise patterns to account for option holders’ expected exercise and post-vesting termination behavior for outstanding stock options over their remaining contractual terms. Expected volatility is calculated by weighting the Company’s historical stock price to calculate expected volatility over the expected term of each grant. The risk-free interest rate


99


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
for the expected term of each option granted is based on the U.S. Treasury yield curve in effect at the time of grant with a period that approximates the expected term of the option.
 
Option activity under the Plan for the year ended December 31, 2010, was as follows:
 
                                 
                Weighted-
       
                Average
       
          Weighted-
    Remaining
    Aggregate
 
          Average
    Contractual
    Intrinsic
 
    Options     Exercise Price     Term     Value  
    (In thousands)           (In years)     (In thousands)  
 
Outstanding at December 31, 2009
    2,134     $ 12.32       4.9          
Granted
    80       10.41                  
Exercised
    (227 )     9.31                  
Forfeited/expired
    (296 )     15.91                  
                                 
Outstanding at December 31, 2010
    1,691     $ 12.01       4.7     $ 5,240  
                                 
Vested and expected to vest at December 31, 2010
    1,691     $ 12.01       4.7     $ 5,240  
                                 
Exercisable at December 31, 2010
    1,501     $ 12.27       4.2     $ 4,304  
                                 
 
The aggregate intrinsic values in the table above represent the total pretax intrinsic value (the difference between Company’s closing stock price on the last trading day of 2010 and the exercise price, multiplied by the number of in-the-money options) that would have been received by the option holders had all option holders exercised their options on December 31, 2010. This amount changes based on the fair market value of the Company’s stock. The total intrinsic value of options exercised for the years ended December 31, 2010, 2009 and 2008 was $973, $210 and $1,433, respectively. The total fair value of the options vested for the years ended December 31, 2010, 2009 and 2008 was $1,608, $1,891 and $1,836, respectively.
 
A summary of options outstanding and options exercisable as of December 31, 2010, is as follows:
 
                                         
    Options Outstanding              
          Weighted
          Options Exercisable  
          Average
    Weighted
          Weighted
 
Range of Exercise
  Number
    Remaining
    Average
    Number
    Average
 
Prices
  Outstanding     Contractual Life     Exercise Price     Exercisable     Exercise Price  
    (In thousands)     (Years)           (In thousands)        
 
$2.76-$4.99
    38       2.2     $ 3.52       38     $ 3.52  
$5.00-$9.99
    323       5.7       8.15       227       7.99  
$10.00-$14.99
    1,163       4.4       12.67       1,069       12.77  
$15.00 and over
    167       5.3       16.82       167       16.82  
                                         
      1,691       4.7     $ 12.01       1,501     $ 12.27  
                                         
 
Foreign Employee Share Awards
 
Prior to the acquisition of the PCB Subsidiaries by the Company, there existed an employee share award scheme originally set up by the controlling shareholder of the PCB Subsidiaries to incentivize and reward the PCB Subsidiaries’ employees. In 2008, administration of this scheme was transferred to a small group of employees in order to carry on the aim of the program. After the close of the acquisition, the unvested Meadville Holdings shares remaining for vesting and/or granting purposes under that scheme were exchanged for the right to earn fractional shares of TTM common stock plus cash equal to the dividend distributed by Meadville Holdings to the holders of Meadville Holdings shares after the acquisition. These remaining grants will vest in five tranches, with two tranches vesting in 2011 and the remaining three tranches vesting annually thereafter, until 2014. As per ASC Topic 805,


100


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
Business Combinations, the fair value of the common stock plus cash consideration to be received by the employee, after adjustment for estimated forfeiture, that is attributed to pre-combination service is recognized as purchase consideration. The fair value, after adjustment for estimated forfeiture, that is attributed to post-combination service is recognized as an expense over the remaining vesting period and is included as a component of total stock-based compensation expense. At December 31, 2010, there were approximately 193 shares in the employee share award grants.
 
Foreign employee share award activity for the year ended December 31, 2010 was as follows:
 
                 
          Weighted
 
          Average
 
          Grant-Date
 
    Shares     Fair Value  
    (In thousands)        
 
Non-vested share awards outstanding at April 8, 2010
    198     $ 12.40  
Forfeited
    (5 )     12.40  
                 
Non-vested share awards outstanding at December 31, 2010
    193       12.40  
                 
Vested and expected to vest at December 31, 2010
    193     $ 12.40  
                 
 
For the years ended December 31, 2010, 2009 and 2008, the amounts recognized in the consolidated financial statements with respect to the stock-based compensation plan are as follows:
 
                         
    Year Ended December 31,  
    2010     2009     2008  
    (In thousands)  
 
Cost of goods sold
  $ 1,272     $ 1,675     $ 1,342  
Selling and marketing
    428       547       405  
General and administrative
    5,213       4,043       3,329  
                         
Stock-based compensation expense recognized
    6,913       6,265       5,076  
Income tax benefit recognized
    (2,054 )     (2,128 )     (1,713 )
                         
Total stock-based compensation expense after income taxes
  $ 4,859     $ 4,137     $ 3,363  
                         
 
The Company may become entitled to a deduction in its tax returns upon the future exercise of incentive stock options under certain circumstances; however, the value of this deduction will be recorded as an increase to additional paid-in capital and not as an income tax benefit. For the year ended December 31, 2010 and 2008, a net tax benefit of $218 and $313, respectively, related to fully vested stock option awards exercised and vested restricted stock units was recorded as an increase to additional paid-in capital. There was no such tax benefit for the year ended December 31, 2009, but rather a net tax shortfall of $621 related to fully vested stock option awards exercised and vested restricted stock units and was recorded as a decrease to additional paid-in capital.
 
The following is a summary of total unrecognized compensation costs as of December 31, 2010:
 
                 
    Unrecognized
    Remaining Weighted
 
    Stock-Based
    Average Recognition
 
    Compensation Cost     Period  
    (In thousands)     (In years)  
 
PRU awards
  $ 409       1.0  
RSU awards
    6,452       0.9  
Stock option awards
    830       1.4  
Foreign employee share awards
    629       1.1  
                 
    $ 8,320          
                 


101


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
(15)   Employee Benefit Plan
 
The Company has three separate retirement benefit plans; one in North America and two in Asia Pacific. In North America, the Company has a 401(k) savings plan in which eligible full-time employees can participate and contribute a percentage of compensation subject to the maximum allowed by the Internal Revenue Service. The Savings Plan provides for a matching contribution of employee contributions up to 5%; 100% up to the first 3% and 50% of the following 2% of employee contributions. In Asia Pacific, the Company contributes to either separate trust-administered funds or various government sponsored pension plans on a mandatory basis. For all retirement plans, the Company has no further payment obligation once the compulsory contributions have been made.
 
The Company recorded contributions to retirement benefit plans of $7,162, $3,174 and $4,265 during the years ended December 31, 2010, 2009, and 2008, respectively.
 
(16)   Asset Retirement Obligations
 
The Company has recorded estimated asset retirement obligations related to the restoration of its leased manufacturing facilities to shell condition upon termination of the leases in place at those facilities and for removal of asbestos at its owned Stafford, Connecticut and Santa Clara, California manufacturing plants. For the year ended December 31, 2009, an adjustment of $691 was recorded to the estimated asset retirement obligations and related assets for the Hayward and Los Angeles, California manufacturing facilities to restore the Company’s leased manufacturing facilities to shell condition, due to changes in the expected timing and amount of cash flows. The change in estimate was recorded as an addition to the corresponding asset, which was subsequently determined to be impaired. See Note 8.
 
Asset retirement obligations in the amount of $945 and $242 were settled during the years ended December 31, 2010 and 2009, respectively, relating to the termination and full settlement of obligations for the Hayward and Santa Clara, California production facility leases and the partial settlement of obligations related to the Los Angeles, California production facility leases.
 
Activity related to asset retirement obligations for the year ended December 31, 2010 and 2009, consists of the following and is included in other long-term liabilities:
 
         
    (In thousands)  
 
Asset retirement obligations at December 31, 2008
  $ 1,384  
Adjustment to estimate
    691  
Accretion expense
    68  
Settlement of asset retirement obligations
    (242 )
         
Asset retirement obligations at December 31, 2009
    1,901  
Accretion expense
    27  
Settlement of asset retirement obligations
    (945 )
         
Asset retirement obligations at December 31, 2010
  $ 983  
         
 
(17)   Preferred Stock
 
The board of directors has the authority, without action to stockholders, to designate and issue preferred stock in one or more series. The board of directors may also designate the rights, preferences and privileges of each series of preferred stock, any or all of which may be superior to the rights of the common stock. As of December 31, 2010, no shares of preferred stock are outstanding.


102


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
(18)   Segment Information
 
The operating segments reported below are the Company’s segments for which separate financial information is available and upon which operating results are evaluated by the chief operating decision maker on a timely basis to assess performance and to allocate resources. Prior to the Company’s acquisition of the PCB Subsidiaries, the Company had two operating segments, PCB Manufacturing and Backplane Assembly, consistent with the nature of its operations. Due to the acquisition, which was completed on April 8, 2010, the Company has reassessed its operating segments and now manages its worldwide operations based on two geographic operating segments: 1) North America, which consists of seven domestic PCB fabrication plants, including a facility that provides follow-on value-added services primarily for one of the PCB fabrication plants, and one backplane assembly plant in Shanghai, China, which is managed in conjunction with the Company’s U.S. operations and its related European sales support infrastructure; and 2) Asia Pacific, which consists of the PCB Subsidiaries and their seven PCB fabrication plants, which include a substrate facility. Each segment operates predominantly in the same industry with production facilities that produce similar customized products for its customers and use similar means of product distribution in their respective geographic regions.
 
The Company evaluates segment performance based on operating segment income, which is operating income before amortization of intangibles. Interest expense and interest income are not presented by segment since they are not included in the measure of segment profitability reviewed by the chief operating decision maker. All inter-segment transactions have been eliminated. Reportable segment assets exclude short-term investments, which are managed centrally.
 
                         
    Year Ended December 31,  
    2010     2009     2008  
    (In thousands)  
 
Net Sales:
                       
North America
  $ 581,828     $ 582,476     $ 680,981  
Asia Pacific
    604,748              
                         
Total sales
    1,186,576       582,476       680,981  
Inter-segment sales
    (6,905 )            
                         
Total net sales
  $ 1,179,671     $ 582,476     $ 680,981  
                         
Operating Segment Income (Loss):
                       
North America
  $ 52,998     $ 21,893     $ (46,073 )
Asia Pacific
    86,239              
                         
Total operating segment income (loss)
    139,237       21,893       (46,073 )
Amortization of definite-lived intangibles
    (13,678 )     (3,440 )     (3,799 )
                         
Total operating income (loss)
    125,559       18,453       (49,872 )
Total other (expense) income
    (16,922 )     (10,330 )     (11,499 )
                         
Income (loss) before income taxes
  $ 108,637     $ 8,123     $ (61,371 )
                         
Depreciation Expense:
                       
North America
  $ 15,528     $ 19,140     $ 21,324  
Asia Pacific
    33,219              
                         
Total depreciation expense
  $ 48,747     $ 19,140     $ 21,324  
                         
Capital Expenditures:
                       
North America
  $ 14,298     $ 10,623     $ 17,891  
Asia Pacific
    100,831              
                         
Total capital expenditures
  $ 115,129     $ 10,623     $ 17,891  
                         


103


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
The Company accounts for inter-segment sales and transfers as if the sale or transfer were to third parties; at arms length and in conjunction with the Company’s revenue recognition policy. The inter-segment sales for the year ended December 31, 2010 are sales from the Asia Pacific operating segment to the North America operating segment.
 
                         
    As of December 31,  
    2010     2009     2008  
    (In thousands)  
 
Segment Assets:
                       
North America
  $ 413,186     $ 541,707     $ 536,583  
Asia Pacific
    1,348,766              
Unallocated corporate assets
          1,351       3,657  
                         
Total assets
  $ 1,761,952     $ 543,058     $ 540,240  
                         
 
The Company markets and sells its products in approximately 45 countries. Other than in the United States and China, the Company does not conduct business in any country in which its net sales in that country exceed 10% of net sales. Net sales and long-lived assets are as follows:
 
                                                 
    2010     2009     2008  
          Long-Lived
          Long-Lived
          Long-Lived
 
    Net Sales     Assets     Net Sales     Assets     Net Sales     Assets  
    (In thousands)  
 
United States
  $ 416,159     $ 113,388     $ 430,866     $ 101,202     $ 504,294     $ 130,298  
China
    497,298       922,923       91,395       16,616       85,114       17,112  
Malaysia
    64,683             30,780             32,331        
Other
    201,531             29,435             59,242        
                                                 
Total
  $ 1,179,671     $ 1,036,311     $ 582,476     $ 117,818     $ 680,981     $ 147,410  
                                                 
 
For the years ended December 31, 2010 and 2009, there were no customers which accounted for 10% or greater of the Company’s net sales. For the year ended December 31, 2008, one North America segment customer, Flextronics, accounted for 12% of the Company’s net sales.
 
The Company’s customers include both OEMs and EMS companies. The Company’s OEM customers often direct a significant portion of their purchases through EMS companies. While the Company’s customers include both OEM and EMS providers, the Company measures customer concentration based on OEM companies, as they are the ultimate end customers.


104


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
(19)   Earnings Per Share
 
The following is a reconciliation of the numerator and denominator used to calculate basic earnings (loss) per share and diluted earnings (loss) per share for the years ended December 31, 2010, 2009 and 2008:
 
                         
    2010     2009     2008  
    (In thousands, except per share amounts)  
 
Net income (loss) attributable to TTM Technologies, Inc. stockholders
  $ 71,531     $ 4,857     $ (36,911 )
                         
Weighted average shares outstanding
    70,220       43,080       42,681  
Dilutive effect of performance-based stock units, restricted stock units and stock options
    599       499        
                         
Diluted shares
    70,819       43,579       42,681  
                         
Earnings (loss) per share attributable to TTM Technologies, Inc. stockholders:
                       
Basic
  $ 1.02     $ 0.11     $ (0.86 )
                         
Diluted
  $ 1.01     $ 0.11     $ (0.86 )
                         
 
For the years ended December 31, 2010 and 2009, performance-based stock units, restricted stock units and stock options to purchase 1,726 and 2,078 shares of common stock, respectively, were not considered in calculating diluted earnings per share because the options’ exercise prices or the total expected proceeds under the treasury stock method for performance-based stock units, restricted stock units or stock options was greater than the average market price of common shares during the year and, therefore, the effect would be anti-dilutive. For the year ended December 31, 2008, potential shares of common stock, consisting of stock options to purchase approximately 2,110 shares of common stock at exercise prices ranging from $2.76 to $16.82 per share and 818 restricted stock units, were not included in the computation of diluted earnings per share because the Company incurred a net loss from operations and, as a result, the impact would be anti-dilutive. There were no outstanding performance-based restricted stock units outstanding for the years ended December 31, 2009 and 2008.
 
Additionally, for the year ended December 31, 2010, the effect of 10,963 shares of common stock related to the Company’s Convertible Notes, the effect of the convertible note hedge to purchase 10,963 shares of common stock and the warrants sold to purchase 10,963 shares of the Company’s common stock were not included in the computation of dilutive earnings per share because the conversion price of the Convertible Notes and the strike price of the warrants to purchase the Company’s common stock were greater than the average market price of common shares during the year, and therefore, the effect would be anti-dilutive.
 
(20)   Related Party Transactions
 
Long-term Equity Investment
 
The Company, through its acquisition of the PCB Subsidiaries, acquired a 10% equity interest in a private company, Aspocomp Oulu Oy (Oulu), which is located in Finland. The majority owner of this private company is Aspocomp Group Oyj (Aspocomp), a Helsinki Stock Exchange traded Finnish company, which is therefore a related party. Aspocomp is also the 20% minority shareholder in Meadville Aspocomp (BVI) Holdings Limited, a majority-owned subsidiary of the Company. The Company consolidates the financial results of this majority-owned company.
 
The Company accounts for this 10% nonmarketable investment in Oulu using the cost method of accounting. Under the cost method of accounting, the investment is measured at cost subsequent to initial measurement, which for the Company was April 8, 2010, the acquisition date of the PCB Subsidiaries. The fair value assigned to this


105


Table of Contents

TTM TECHNOLOGIES, INC.
 
Notes to Consolidated Financial Statements — (Continued)
 
investment was $2,718, which was based on a market approach to estimate the enterprise value calculation and recorded as a component of non-current assets.
 
The equity investment is tested for impairment if there are impairment triggers. There was no impairment of the equity investment for the year ended December 31, 2010.
 
Supply and Lease Arrangements
 
In December 2009, one of the Company’s foreign subsidiaries (on behalf of itself and other foreign subsidiaries) entered into long-term supply arrangements to purchase laminate and prepreg from a related party (and its subsidiary) in which a significant shareholder of the Company holds an approximate 17% share. These supply arrangements commenced on January 1, 2010, and expire on December 31, 2012. The Company’s foreign subsidiaries also purchased laminate and prepreg from the laminate companies of the said significant shareholder of the Company. For the year ended December 31, 2010, the Company purchased $92,705 of laminate and prepreg from these related parties.
 
Additionally, a foreign subsidiary of the Company also leases warehouse space from a related party controlled by a significant shareholder of the Company. Likewise, a related party leases employee housing space from a foreign subsidiary of the Company. For the year ended December 31, 2010, the net income for these activities was $222.
 
At December 31, 2010, the Company’s consolidated balance sheet included $50,374 in accounts payable due to and $86 in accounts receivable due from a related party for the supply and lease arrangements.
 
(21)   Metal Reclamation
 
During 2008, the Company recognized $3,700 of income related to a pricing reconciliation of metal reclamation activity attributable to a single vendor. As a result of the pricing reconciliation, the Company discovered that the vendor had inaccurately compensated the Company for gold reclamations over several years.


106