10-K
Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

 

[X] Annual Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
     for the fiscal year ended December 26, 2014, or

 

[  ] Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
   for the transition period from                      to                     .

Commission File No. 001-09249

Graco Inc.

(Exact name of Registrant as specified in its charter)

 

Minnesota

41-0285640

(State or other jurisdiction of incorporation or organization)

(I.R.S. Employer Identification No.)

88 –11th Avenue Northeast

Minneapolis, MN 55413

(Address of principal executive offices) (Zip Code)

(612) 623-6000

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Common Stock, par value $1.00 per share

Shares registered on the New York Stock Exchange.

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  X   No    

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes      No  X 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes    X    No    

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data file required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes   X    No    

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [X]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer” and “accelerated filer” in Rule 12b-2 of the Exchange Act (Check one):

Large accelerated filer   X    Accelerated filer     Non-accelerated filer     Smaller reporting company    

Indicate by check mark whether the registrant is a shell company (as defined by Rule 12b-2 of the Act).

Yes      No   X 

The aggregate market value of 59,350,426 shares of common stock held by non-affiliates of the registrant was $4,615,089,158 as of June 27, 2014.

58,991,622 shares of common stock were outstanding as of February 3, 2015.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Company’s definitive Proxy Statement for its Annual Meeting of Shareholders to be held on April 24, 2015, are incorporated by reference into Part III, as specifically set forth in said Part III.

 


Table of Contents

INDEX TO ANNUAL REPORT

ON FORM 10-K

 

 

 

 

    Page  

Part I

Item 1

Business

  3   

Item 1A

Risk Factors

  6   

Item 1B

Unresolved Staff Comments

  9   

Item 2

Properties

  9   

Item 3

Legal Proceedings

  11   

Item 4

Mine Safety Disclosures

  11   

Executive Officers of Our Company

  12   

Part II

Item 5

Market for the Company’s Common Equity, Related Shareholder Matters and Issuer Purchases of Equity Securities

  14   

Item 6

Selected Financial Data

  15   

Item 7

Management’s Discussion and Analysis of Financial Condition and Results of Operations

  16   

Item 7A

Quantitative and Qualitative Disclosures About Market Risk

  27   

Item 8

Financial Statements and Supplementary Data

  29   

Management’s Report on Internal Control Over Financial Reporting

  29   

Reports of Independent Registered Public Accounting Firm

  30   

Consolidated Statements of Earnings

  32   

Consolidated Statements of Comprehensive Income

  32   

Consolidated Balance Sheets

  33   

Consolidated Statements of Cash Flows

  34   

Consolidated Statements of Shareholders’ Equity

  35   

Item 9

Changes in and Disagreements With Accountants on Accounting and Financial Disclosure

  58   

Item 9A

Controls and Procedures

  58   

Item 9B

Other Information

  58   

Part III

Item 10

Directors, Executive Officers and Corporate Governance

  59   

Item 11

Executive Compensation

  59   

Item 12

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

  59   

Item 13

Certain Relationships and Related Transactions, and Director Independence

  59   

Item 14

Principal Accounting Fees and Services

  59   

Part IV

Item 15

Exhibits, Financial Statement Schedule

  60   

Exhibit Index

  63   

 

ACCESS TO REPORTS
 
Investors may obtain access free of charge to the Graco Inc. Annual Report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, other reports and amendments to the reports by visiting the Graco website at www.graco.com. These reports will be available as soon as reasonably practicable following electronic filing with, or furnishing to, the Securities and Exchange Commission.

 

2


Table of Contents

PART I

Item 1. Business

Graco Inc., together with its subsidiaries (“Graco,” “us,” “we,” or “our Company”), is a multi-national manufacturing company. We design, manufacture and market equipment to pump, meter, mix and dispense a wide variety of fluids and coatings. Our equipment is used in the construction, automotive, industrial, mining, oil and natural gas, process, public works and other industries.

We classify our business into three reportable segments, each with a worldwide focus: Industrial, Contractor and Lubrication (more details below). Financial information concerning these segments is set forth in Part II, Item 7, Results of Operations and Note B to the Consolidated Financial Statements of this Form 10-K.

Each segments sells its products in North, Central and South America (the “Americas”), Europe, Middle East and Africa (“EMEA”), and Asia Pacific. Sales in the Americas represent approximately 56 percent of our Company’s total sales. Sales in EMEA represent approximately 25 percent. Sales in Asia Pacific represent approximately 19 percent. Part II, Item 7, Results of Operations and Note B to the Consolidated Financial Statements of this Form 10-K contain financial information about these geographic markets. We provide marketing and product design in each of these geographic regions. Our Company also provides application assistance to distributors and employs sales personnel in each of these geographic regions.

We specialize in providing equipment solutions for difficult-to-handle materials with high viscosities, abrasive or corrosive properties and multiple component materials that require precise ratio control. We aim to serve niche markets, providing high customer value through product differentiation. Our products enable customers to reduce their use of labor, material and energy, improve quality and achieve environmental compliance. We have particularly strong manufacturing and engineering capabilities.

We make significant investments in developing innovative, high quality products. We strive to grow into new geographic markets by strategically adding commercial resources and third party distribution in growing and emerging markets. We have grown our third party distribution to have specialized experience in particular end user applications. We leverage our product technologies for new applications and industries. We make targeted acquisitions, completing three acquisitions in fiscal year 2014 and three acquisitions in early fiscal year 2015. Together, these comprise our long-term growth strategies, which we coordinate and drive across our geographic regions.

Graco Inc. is a Minnesota corporation and was incorporated in 1926. For more information about our Company and our products, services and solutions, visit our website at www.graco.com. The information on the website is not part of this report nor any other report filed or furnished to the Securities and Exchange Commission (“SEC”).

Manufacturing and Distribution

We manufacture a majority of our products in the United States. We manufacture some of our products in Switzerland (Industrial segment), the United Kingdom (Industrial segment), the People’s Republic of China (“P.R.C.”) (all segments), Belgium (all segments), and Romania (Industrial segment). Our manufacturing is aligned with our business segments and is co-located with product development to accelerate technology improvements and improve our cost structure. We perform critical machining, assembly and testing in-house for most of our products to control quality, improve response time and maximize cost-effectiveness. We make our products in focused factories and product cells. We source raw materials and components from suppliers around the world.

For all segments, we primarily sell our equipment through third party distributors worldwide, positioned throughout our geographic regions. We also sell to selective retailers. We primarily distribute our products from our warehouses to distributors or retailers, who sell our products to end users. Outside of the United States, our subsidiaries located in Australia, Belgium, Japan, Italy, Korea, Mexico, the P.R.C., Switzerland and the United Kingdom distribute our Company’s products. Operations in Maasmechelen, Belgium; St. Gallen, Switzerland; Shanghai, P.R.C.; and Montevideo, Uruguay reinforce our commitment to their regions.

During 2014, manufacturing capacity met business demand. Production requirements in the immediate future are expected to be met through existing facilities, the installation of new automatic and semi-automatic machine tools, efficiency and productivity improvements, the use of leased space and available subcontract services.

For more details on our facilities, see Item 2, Properties.

Product Development

Our primary product development efforts are carried out in facilities located in Minneapolis, Anoka and Rogers, Minnesota; North Canton, Ohio; St. Gallen, Switzerland; Suzhou, P.R.C.; and Brighouse, United Kingdom. The product development and engineering

 

3


Table of Contents

groups focus on new product design, product improvements, new applications for existing products and technologies for their specific customer base. Our product development efforts focus on bringing new and supplemental return-on-investment value to end users of our products. Total product development expenditures for all segments were $54 million in 2014, $51 million in 2013, and $49 million in 2012.

Our Company consistently makes significant investments in new products, and in 2014 we invested $54 million, or 4.4 percent of sales, in our product development activities. Our product development activities are focused both on upgrades to our current product lines to provide features and benefits that will provide a return-on-investment to our end user customers and development of products that will reach into new industries and applications to incrementally grow our sales. Sales of products that refresh and upgrade our product lines are measured and compared to planned results. Sales of products that provide entry into new industries and applications are also measured, with additional focus on commercial resources and activities to build specialized third party distribution and market acceptance by end users.

Business Segments

Industrial Segment

The Industrial segment is our largest segment and represents approximately 59 percent of our total sales in 2014. It includes the Applied Fluid Technologies division, Industrial Products division and Process division. The Industrial segment makes products for industrial customers that manufacture their own products (such as appliances, vehicles, airplanes and furniture).

Most Industrial segment equipment is sold worldwide through specialized third party distributors, integrators, design centers, original equipment manufacturers and material suppliers. Some products are sold directly to end users. We work with material suppliers to develop or adapt our equipment for use with specialized and hard-to-handle materials. Distributors promote and sell the equipment, hold inventory, provide product application expertise and offer on-site service, technical support and integration capabilities. Integrators implement large individual installations in manufacturing plants where products and services from a number of different manufacturers are aggregated into a single system. Design centers engineer systems for their customers using our products. Original equipment manufacturers incorporate our Company’s Industrial segment products into systems and assemblies that they then supply to their customers.

Applied Fluid Technologies

The Applied Fluid Technologies division designs and sells equipment for use by industrial customers and specialty contractors. This equipment includes two component proportioning systems that are used to spray polyurethane foam (spray foam) and polyurea coatings. Spray foam is commonly used for insulating building walls, roofs, water heaters, refrigerators, hot tubs and other items. Polyurea coatings are applied on storage tanks, pipes, roofs, truck beds, concrete and other items. We offer a complete line of pumps and proportioning equipment that sprays specialty coatings on a variety of surfaces for protection and fireproofing. This division also manufactures vapor-abrasive blasting equipment, as well as equipment that pumps, meters, mixes and dispenses sealant, adhesive and composite materials. Our advanced composite equipment includes gel coat equipment, chop and wet-out systems, resin transfer molding systems and applicators. This equipment bonds, molds, seals, vacuum encapsulates, and laminates parts and devices in a wide variety of industrial applications.

Industrial Products

The Industrial Products division makes finishing equipment that applies paint and other coatings to products such as motor vehicles, appliances, furniture and other industrial and consumer products. A majority of this division’s business is outside of North America.

This division’s products include liquid finishing equipment that applies liquids on wood, metals and plastics. This equipment includes paint circulating and paint supply pumps, paint circulating advanced control systems, plural component coating proportioners, various accessories to filter, transport, agitate and regulate fluid, and spare parts such as spray tips, seals and filter screens. We also offer a variety of applicators that use different methods of atomizing and spraying the paint or other coatings depending on the viscosity of the fluid, the type of finish desired, and the need to maximize transfer efficiency, minimize overspray and minimize the release of volatile organic compounds into the air. Manufacturers in the automotive, automotive feeder, commercial and recreational vehicle, military and utility vehicle, aerospace, farm, construction, wood and general metals industries use our liquid finishing products.

We make powder finishing products that coat powder finishing on metals. These products are sold under the Gema® trademark. Gema powder systems coat window frames, metallic furniture, automotive components and sheet metal. Primary end users of our Gema powder finishing products include manufacturers in the construction, home appliance, automotive component and custom coater industries. We strive to provide innovative production solutions in powder coating for end users in emerging and developed markets.

 

4


Table of Contents

Process

Our Process division makes pumps of various technologies that move chemicals, water, waste water, petroleum, food and other fluids. Manufacturers and processors in the food and beverage, dairy, pharmaceutical, cosmetic, oil and gas, electronics, waste water, mining and ceramics industries use these pumps. This division makes environmental monitoring and remediation equipment that is used to conduct ground water sampling and ground water remediation, and for landfill liquid and gas management.

In 2014, we acquired the stock of Alco Valves Group. Alco Valves Group is based in the United Kingdom and manufactures high pressure valves used in the oil and natural gas industry. Subsequent to the 2014 fiscal year-end, we acquired High Pressure Equipment (HiP) company with facilities in the United States and the United Kingdom. HiP manufactures valves, fittings and other flow control equipment for use in ultra-high pressure environments such as the oil and natural gas industry. Also subsequent to the 2014 fiscal year-end, we purchased the White Knight Fluid Handling business, which is based in the United States and makes pumps that are used in a variety of chemical applications.

Contractor Segment

The Contractor segment generated approximately 31 percent of our Company’s 2014 total sales. Through this segment, we offer sprayers that apply paint to walls and other structures. We offer several models of professional grade handheld paint sprayers. We also make sprayers that apply texture to walls and ceilings, and sprayers that apply highly viscous coatings to roofs. Contractor equipment also includes sprayers that apply markings on roads, parking lots, fields, bike paths, crosswalks and floors.

This segment’s end users are primarily professional painters in the construction and maintenance industries, tradesmen and do-it-yourselfers. Contractor products are marketed and sold in all major geographic areas. We continue to add distributors throughout the world that specialize in the sale of Contractor products. Throughout the world, we are pursuing a broad strategy of converting contractors accustomed to manually applying paint and other coatings by brush-and-roller to spray technology.

Our Contractor products are distributed primarily through distributor outlets whose main products are paint and other coatings. Contractor products are also sold through general equipment distributors outside of North America. Certain sprayers and accessories are distributed globally through the home center channel.

Lubrication Segment

The Lubrication segment represented approximately 10 percent of our Company’s sales during 2014. The bulk of the Lubrication segment’s sales comes from North America.

Through the Lubrication segment, we offer equipment for use in vehicle servicing. We supply pumps, hose reels, meters, valves and accessories for use by fast oil change facilities, service garages, fleet service centers, automobile dealerships, auto parts stores, truck builders and heavy equipment service centers.

We offer systems, components and accessories for the automatic lubrication of industrial and commercial equipment, compressors, turbines and on- and off-road vehicles. We offer products that automatically lubricate bearings, gears and generators, and products that evacuate and dispense lubricants. Industries served include gas transmission and petrochemical, pulp and paper, mining and construction, agricultural equipment, food and beverage, material handling, metal manufacturing, wind energy and oil and gas exploration.

Raw Materials

The primary materials and components in our products are steel of various alloys, sizes and hardness; specialty stainless steel and aluminum bar stock, tubing and castings; tungsten carbide; electric and gas motors; injection molded plastics; sheet metal; forgings; powdered metal; hoses; and electronic components. The materials and components that we use are generally adequately available through multiple sources of supply. To manage cost, we source significant amounts of materials and components from outside the United States, primarily in the Asia Pacific region.

In 2014, our raw material and purchased component availability was strong, and our costs were fairly stable. We experienced price decreases in copper and rubber commodities, but had some significant increases in stainless steel, aluminum, plastics and chrome.

We endeavor to address fluctuations in the price and availability of various materials and components through adjustable surcharges and credits, close management of current suppliers, price negotiations and an intensive search for new suppliers. We have performed risk assessments of our key suppliers, and we factor the risks identified into our commodity plans.

 

5


Table of Contents

Intellectual Property

We own a number of patents across our segments and have patent applications pending both in the United States and in other countries, license our patents to others, and are a licensee of patents owned by others. In our opinion, our business is not materially dependent upon any one or more of these patents or licenses. Our Company also owns a number of trademarks in the United States and foreign countries, including registered trademarks for “GRACO,” “Gema,” several forms of a capital “G,” and various product trademarks that are material to our business, inasmuch as they identify Graco and our products to our customers.

Competition

We encounter a wide variety of competitors that vary by product, industry and geographic area. Each of our segments generally has several competitors. Our competitors are both U.S. and foreign companies and range in size. We believe that our ability to compete depends upon product quality, product reliability, innovation, design, customer support and service, personal relationships, specialized engineering and competitive pricing. Although no competitor duplicates all of our products, some competitors are larger than our Company, both in terms of sales of directly competing products and in terms of total sales and financial resources. We also face competitors with different cost structures and expectations of profitability and these companies may offer competitive products at lower prices. We may have to refresh our product line and continue development of our distribution channel to stay competitive. We are also facing competitors who illegally sell counterfeits of our products or otherwise infringe on our intellectual property rights. We may have to increase our intellectual property enforcement activities.

Environmental Protection

Our compliance with federal, state and local environmental laws and regulations did not have a material effect upon our capital expenditures, earnings or competitive position during the fiscal year ended December 26, 2014.

Employees

As of December 26, 2014, we employed approximately 3,100 persons, excluding the employees of the held separate Liquid Finishing businesses (see below). Of this total, approximately 1,050 were employees based outside the United States, and 900 were hourly factory workers in the United States. None of our Company’s United States employees are covered by a collective bargaining agreement. Various national industry-wide labor agreements apply to certain employees in various countries outside the United States. Compliance with such agreements has no material effect on our Company or our operations.

Acquisition and Planned Divestiture of ITW Liquid Finishing Businesses

In April 2012, we purchased the finishing businesses of Illinois Tool Works Inc. (“ITW”). The acquisition included powder finishing and liquid finishing equipment operations, technologies and brands (separately, the “Powder Finishing” and “Liquid Finishing” businesses). Results of the Powder Finishing businesses have been included in the Industrial segment since the date of acquisition. In March 2012, the United States Federal Trade Commission (“FTC”) issued an order for our Company to hold the Liquid Finishing assets separate from our other businesses. In May 2012, the FTC issued a proposed decision and order that required us to sell the held separate Liquid Finishing business assets no later than 180 days from the date the order becomes final. The FTC approved a final decision and order that became effective on October 9, 2014.

Pursuant to the final order, Graco must sell the Liquid Finishing business assets within 180 days of the effective date. On October 8, 2014, the Company announced it had signed a definitive agreement to sell the Liquid Finishing business assets for $590 million cash, subject to regulatory approval and other customary closing conditions. The sale transaction is expected to close in the first half of 2015. Graco will continue to hold the Liquid Finishing businesses separate and maintain them as viable and competitive until the sale process is complete.

Item 1A. Risk Factors

Growth Strategies and Acquisitions – Our growth strategies may not provide the return on investment desired if we are not successful in implementation of these strategies.

Making acquisitions, investing in new products, expanding geographically and targeting new industries are among our growth strategies. We may not obtain the return on investment desired if we are not successful in implementing these growth strategies. Suitable acquisitions must be located, completed and effectively integrated into or added to our existing businesses or corporate structure for this growth strategy to be successful. We may not be able to obtain financing at a reasonable cost. We may be unsuccessful in acquiring and effectively integrating into or adding businesses to our current operations or corporate structure. We

 

6


Table of Contents

may not realize projected efficiencies and cost-savings from the businesses we acquire. We cannot predict how customers, competitors, suppliers and employees will react to the acquisitions that we make. If acquired businesses do not meet performance expectations, assets acquired could be subject to impairment. We make significant investments in developing products that have innovative features and differentiated technology in their industries and in niche markets. We are adding to the geographies in which we do business with third party distributors. We cannot predict whether and when we will be able to realize the expected financial results and accretive effect of the acquisitions that we make, the new products that we develop and the channel expansions that we make.

Divestiture - Our acquisition of the finishing businesses of ITW includes a requirement that we divest the acquired Liquid Finishing businesses, which has not been completed and remains subject to FTC approval.

In April 2012, we completed our purchase of the finishing businesses of ITW. The acquisition included Powder Finishing and Liquid Finishing equipment operations, technologies and brands. Results of the Powder Finishing businesses have been included in the Industrial segment since the date of acquisition. Pursuant to a March 2012 order, the Liquid Finishing businesses were to be held separate from the rest of Graco’s businesses while the FTC considered a settlement with Graco and determined which portions of the Liquid Finishing business Graco must divest. The FTC approved a final decision and order on October 6, 2014, which became effective on October 9, 2014. Pursuant to the final order, Graco must sell the Liquid Finishing business assets within 180 days of the effective date. On October 8, 2014, the Company announced it had signed a definitive agreement to sell the Liquid Finishing business assets for $590 million cash, subject to regulatory approval and other customary closing conditions. The sale transaction is expected to close in the first half of 2015. Nonetheless, we cannot be certain to what extent or when the required regulatory approval of a buyer and terms of the sale will be obtained, or whether the Company will be able to complete a divestiture in a time frame that is satisfactory to the FTC. Graco will continue to hold the Liquid Finishing businesses separate and maintain them as viable and competitive until the sale process is complete.

Economic Environment – Demand for our products depends on the level of commercial and industrial activity worldwide.

An economic downturn or financial market turmoil may depress demand for our equipment in all major geographies and markets. If our distributors and original equipment manufacturers are unable to purchase our products because of unavailable credit or unfavorable credit terms or are simply unwilling to purchase our products, our net sales and earnings will be adversely affected. An economic downturn may affect our ability to satisfy the financial covenants in the terms of our financing arrangements.

Currency – Changes in currency translation rates could adversely impact our revenue and earnings.

Changes in exchange rates will impact our reported sales and earnings. A majority of our manufacturing and cost structure is based in the United States. In addition, decreased value of local currency may make it difficult for some of our distributors to purchase products.

Changes in Laws and Regulations – Changes may impact how we can do business and the cost of doing business around the world.

The speed and frequency of implementation and the complexity of new or revised laws and regulations globally appear to be increasing. In addition, as our business grows and/or geographically expands, we may become subject to laws and regulations previously inapplicable to our business. These laws and regulations increase our costs of doing business, may affect the manner in which our products will be produced or delivered and may impact our long-term ability to provide returns to our shareholders.

Anti-Corruption Laws – We may incur costs and suffer damages if our employees, agents, distributors or suppliers violate anti-bribery, anti-corruption or trade laws and regulations.

Bribery, corruption and trade laws and regulations, and enforcement thereof, is increasing in frequency, complexity and severity on a global basis. If our internal controls and compliance program do not adequately prevent or deter our employees, agents, distributors, suppliers and other third parties with whom we do business from violating anti-corruption laws, we may incur defense costs, fines, penalties and reputational damage.

Intellectual Property – Demand for our products may be affected by new entrants who copy our products and/or infringe on our intellectual property.

From time to time, we have been faced with instances where competitors have infringed or improperly used our intellectual property and/or taken advantage of our design and development efforts. The ability to protect and enforce intellectual property rights varies across jurisdictions. Competitors who copy our products are becoming more prevalent in Asia. If we are unable to effectively meet these challenges, they could adversely affect our revenues and profits and hamper our ability to grow.

 

7


Table of Contents

Foreign Operations – Conducting business internationally exposes our Company to risks that could harm our business.

In 2014, approximately 53 percent of our sales were generated by customers located outside the United States. We are increasing our presence in advancing economies. Operating and selling outside of the United States exposes us to certain risks that could adversely impact our sales volume, rate of growth or profitability. These risks include: complying with foreign legal and regulatory requirements, international trade factors (export controls, trade sanctions, duties, tariff barriers and other restrictions), protection of our proprietary technology in certain countries, potentially burdensome taxes, potential difficulties staffing and managing local operations, and changes in exchange rates.

Competition – Our success depends upon our ability to develop, market and sell new products that meet our customers’ needs, and anticipate industry changes.

Our profitability will be affected if we do not develop new products and technologies that meet our customers’ needs. Our ability to develop, market and sell products that meet our customers’ needs depends upon a number of factors, including anticipating the features and products that our customers will need in the future, identifying and entering into new markets, and training our distributors. Changes in industries in which we participate, including consolidation of competitors and customers, could affect our success. Price competition and competitor strategies could affect our success.

Suppliers – Risks associated with foreign sourcing, supply interruption, delays in raw material or component delivery, supply shortages and counterfeit components may adversely affect our production or profitability.

We are sourcing an increasing percentage of our materials and components from suppliers outside the United States, and from suppliers within the United States who engage in foreign sourcing. Long lead times or supply interruptions associated with a global supply base may reduce our flexibility and make it more difficult to respond promptly to fluctuations in demand or respond quickly to product quality problems. Changes in exchange rates between the U.S. dollar and other currencies and fluctuations in the price of commodities may impact the manufacturing costs of our products and affect our profitability. Protective tariffs, unpredictable changes in duty rates, and trade regulation changes may make certain foreign-sourced parts no longer competitively priced. Long supply chains may be disrupted by environmental events or other political factors. Raw materials may become limited in availability from certain regions. Port labor disputes may delay shipments. We source a large volume and a variety of electronic components, which exposes us to an increased risk of counterfeit components entering our supply chain. If counterfeit components unknowingly become part of our products, we may need to stop delivery and rebuild our products. We may be subject to warranty claims and may need to recall products.

Security Breaches – Intrusion into our information systems may impact our business.

Security breaches or intrusion into our information systems, and the breakdown, interruption in or inadequate upgrading or maintenance of our information processing software, hardware or networks may adversely affect our business. Security breaches or intrusion into the systems or data of the third parties with whom we conduct business may also harm our business.

Political Instability – Uncertainty surrounding political leadership may limit our growth opportunities.

Domestic political instability, including government shut downs, may limit our ability to grow our business. International political instability may prevent us from expanding our business into certain geographies and may also limit our ability to grow our business. Terrorist activities and civil disturbances may harm our business.

Legal Proceedings – Costs associated with claims, litigation, administrative proceedings and regulatory reviews, and potentially adverse outcomes, may affect our profitability.

As our Company grows, we are at an increased risk of being a target in litigation, administrative proceedings and regulatory reviews. The cost of defending such matters appears to be increasing, particularly in the United States. We may also need to pursue claims or litigation to protect our interests. Such costs may adversely affect our Company’s profitability. Our businesses expose us to potential toxic tort, product liability and commercial claims. Successful claims against the Company may adversely affect our results.

Major Customers – Our Contractor segment depends on a few large customers for a significant portion of its sales. Significant declines in the level of purchases by these customers could reduce our sales and impact segment profitability.

Our Contractor segment derives a significant amount of revenue from a few large customers. Substantial decreases in purchases by these customers, difficulty in collecting amounts due or the loss of their business would adversely affect the profitability of this segment. The business of these customers is dependent upon the economic vitality of the construction and home maintenance markets. If these markets decline, the business of our customers could be adversely affected and their purchases of our equipment could decrease.

 

8


Table of Contents

Variable Industries – Our success may be affected by variations in the construction and automotive industries.

Our business may be affected by fluctuations in residential, commercial and institutional building and remodeling activity. Changes in construction materials and techniques may also impact our business. Our business may also be affected by fluctuations of activity in the automotive industry.

Natural Disasters – Our operations are at risk of damage or destruction by natural disasters or fire.

The loss of, or substantial damage to, one of our facilities could make it difficult to supply our customers with product and provide our employees with work. Flooding, tornadoes, typhoons, unusually heavy precipitation, earthquakes or fire could adversely impact our operations.

Item  1B. Unresolved Staff Comments

None.

Item 2. Properties

Our facilities are in satisfactory condition, suitable for their respective uses, and are generally adequate to meet current needs. A description of our principal facilities as of February 17, 2015, is set forth in the chart below. Facilities are used by all segments, unless otherwise noted.

 

Facility

 

Owned or
Leased

Square
Footage
  Facility Activities

 

North America

 

Dunnville, Ontario, Canada

 

Leased   3,200   Manufacturing for Industrial segment
Guelph, Ontario, Canada Leased   3,300  

Warehouse and office for Industrial segment

 

Tlalnepantla, State of Mexico, Mexico Leased   4,000  

Manufacturing, warehouse and office for Industrial segment

 

San Leandro, California, United States Leased   12,100  

Manufacturing, warehouse and office for Industrial segment

 

Indianapolis, Indiana, United States Owned   63,500   Warehouse, office, product development and application laboratory for Industrial segment
Dexter, Michigan, United States Leased   31,300  

Manufacturing, warehouse, office and product development for Industrial segment

 

Minneapolis, Minnesota, United States Owned   142,000  

Corporate office; office and product development for Industrial segment

 

Minneapolis, Minnesota, United States Owned   42,000  

Corporate office

 

Minneapolis, Minnesota, United States Owned   405,000  

Manufacturing, warehouse and office for Industrial segment

 

Minneapolis, Minnesota, United States Owned   86,700  

Warehouse and assembly for Industrial segment

 

Anoka, Minnesota, United States Owned   207,000   Manufacturing, warehouse, office and product development for Lubrication segment
Rogers, Minnesota, United States Owned   333,000  

Manufacturing, office and product development for Contractor segment

 

 

9


Table of Contents
Rogers, Minnesota, United States Leased   227,100  

Warehouse and office

 

North Canton, Ohio, United States Owned   132,000  

Manufacturing, warehouse, office, product development and application laboratory for Industrial segment

 

Erie, Pennsylvania, United States Leased   43,000  

Manufacturing, warehouse, office and product development for Industrial segment

 

Sioux Falls, South Dakota, United States Owned   149,000  

Manufacturing and office for Industrial and Contractor segment spray guns and accessories

 

Houston, Texas, United States

 

Leased   4,500  

Warehouse and office for Industrial segment

 

Kamas, Utah, United States

 

Leased   20,000  

Manufacturing and office for Industrial segment

 

Chesapeake, Virginia, United States

 

Leased   9,600  

Manufacturing and office for Industrial segment

 

Chesapeake, Virginia, United States

 

Leased   3,300  

Warehouse for Industrial segment

 

South America

 

Porto Alegre, Rio Grande do Sul, Brazil

 

Leased   4,000   Manufacturing, office and product development for Industrial segment

Porto Alegre, Rio Grande do Sul, Brazil

 

Leased   2,900  

Manufacturing and warehouse for Industrial segment

 

Uruguay Free Zone, Montevideo, Uruguay

 

Leased   1,800  

Office

 

Europe

 

Maasmechelen, Belgium Owned   175,000  

Warehouse, office and assembly; European training, testing and education center

 

Valence, France

 

Leased   3,900  

Office for Industrial segment

 

Rödermark, Germany

 

Leased   8,600  

Warehouse and office for Industrial segment

 

Milan, Italy

 

Leased   7,500  

Office and warehouse for Industrial segment

 

Sibiu, Romania

 

Leased   31,000  

Manufacturing for Industrial segment

 

St. Gallen, Switzerland

 

Owned   78,000  

Manufacturing, warehouse, office, product development and application laboratory for Industrial segment

 

St. Gallen, Switzerland

 

Leased   9,000  

Manufacturing for Industrial segment

 

Poole, Dorset, United Kingdom

 

Leased   3,500   Office and warehouse for Industrial segment
Denton, Manchester, United Kingdom Leased   2,500  

Manufacturing, warehouse and office for Industrial segment

 

 

10


Table of Contents
Stoke-on-Trent, Staffordshire, United Kingdom Leased   7,300  

Manufacturing, warehouse, office and product development for Industrial segment

 

Brighouse, West Yorkshire, United Kingdom Leased   18,000  

Manufacturing, warehouse, office and product development for Industrial segment

 

Brighouse, West Yorkshire, United Kingdom Leased   10,800  

Manufacturing, warehouse and office for Industrial segment

 

Brighouse, West Yorkshire, United Kingdom Leased   6,000  

Warehouse for Industrial segment

Asia Pacific

 

Bundoora, Australia Leased   2,500  

Office

 

Derrimut, Australia Leased   7,500  

Warehouse

 

Shanghai, P.R.C. Leased   29,400  

Office; Asia Pacific training, testing and education center

 

Shanghai Waiqaoqiao Pilot Free Trade Zone, P.R.C. Leased   30,700  

Warehouse

 

Shanghai, P.R.C.

 

Leased   27,000   Office and warehouse for Industrial segment
Suzhou, P.R.C. Owned   79,000  

Manufacturing, warehouse, office and product development

 

Yokohama, Japan

 

Leased   18,500  

Office

 

Boon Lay Way, Singapore

 

Leased   2,100   Warehouse and office for Industrial segment

Anyang, South Korea

 

Leased   5,100  

Office

 

Gwangjoo, South Korea Leased   10,700   Warehouse

Item 3. Legal Proceedings

Our Company is engaged in routine litigation, administrative proceedings and regulatory reviews incident to our business. It is not possible to predict with certainty the outcome of these unresolved matters, but management believes that they will not have a material effect upon our operations or consolidated financial position.

Item 4. Mine Safety Disclosures

Not applicable.

 

11


Table of Contents

Executive Officers of Our Company

The following are all the executive officers of Graco Inc. as of February 17, 2015:

Patrick J. McHale, 53, is President and Chief Executive Officer, a position he has held since June 2007. He served as Vice President and General Manager, Lubrication Equipment Division from June 2003 to June 2007. He was Vice President, Manufacturing and Distribution Operations from April 2001 to June 2003. He served as Vice President, Contractor Equipment Division from February 2000 to April 2001. From September 1999 to February 2000, he was Vice President, Lubrication Equipment Division. Prior to September 1999, he held various manufacturing management positions in Minneapolis, Minnesota; Plymouth, Michigan; and Sioux Falls, South Dakota. Mr. McHale joined the Company in 1989.

David M. Ahlers, 56, became Vice President, Human Resources and Corporate Communications in April 2010. From September 2008 through March 2010, he served as the Company’s Vice President, Human Resources. Prior to joining Graco, Mr. Ahlers held various human resources positions, including, most recently, Chief Human Resources Officer and Senior Managing Director of GMAC Residential Capital, from August 2003 to August 2008. He joined the Company in 2008.

Caroline M. Chambers, 50, was elected Vice President, Corporate Controller and Information Systems on December 6, 2013. She has also served as the Company’s principal accounting officer since September 2007. From April 2009 to December 2013, she was Vice President and Corporate Controller. She served as Vice President and Controller from December 2006 to April 2009. She was Corporate Controller from October 2005 to December 2006 and Director of Information Systems from July 2003 through September 2005. Prior to becoming Director of Information Systems, she held various management positions in the internal audit and accounting departments. Prior to joining Graco, Ms. Chambers was an auditor with Deloitte & Touche in Minneapolis, Minnesota and Paris, France. Ms. Chambers joined the Company in 1992.

Mark D. Eberlein, 54, is Vice President and General Manager, Process Division, a position he has held since January 2013. From November 2008 to December 2012, he was Director, Business Development, Industrial Products Division. He was Director, Manufacturing Operations, Industrial Products Division from January to October 2008. From 2001 to 2008, he was Manufacturing Operations Manager of a variety of Graco business divisions. Prior to joining Graco, Mr. Eberlein worked as an engineer at Honeywell and at Sheldahl. He joined the Company in 1996.

Karen Park Gallivan, 58, became Vice President, General Counsel and Secretary in September 2005. She was Vice President, Human Resources from January 2003 to September 2005. Prior to joining Graco, she was Vice President of Human Resources and Communications at Syngenta Seeds, Inc. from January 1999 to January 2003. From 1988 through January 1999, she was the general counsel of Novartis Nutrition Corporation. Prior to joining Novartis, Ms. Gallivan was an attorney with the law firm of Rider, Bennett, Egan & Arundel, L.L.P. She joined the Company in 2003.

James A. Graner, 70, became Chief Financial Officer in September 2005, a position he held in conjunction with Treasurer from September 2005 to June 2011. He served as Vice President and Controller from March 1994 to September 2005. He was Treasurer from May 1993 through February 1994. Prior to becoming Treasurer, he held various managerial positions in the treasury, accounting and information systems departments. He joined the Company in 1974. Mr. Graner has announced his intention to retire in 2015.

Dale D. Johnson, 60, became Vice President and General Manager, Contractor Equipment Division in April 2001. From January 2000 through March 2001, he served as President and Chief Operating Officer. From December 1996 to January 2000, he was Vice President, Contractor Equipment Division. Prior to becoming the Director of Marketing, Contractor Equipment Division in June 1996, he held various marketing and sales positions in the Contractor Equipment division and the Industrial Equipment division. He joined the Company in 1976.

Jeffrey P. Johnson, 55, became Vice President and General Manager, EMEA in January 2013. From February 2008 to December 2012 he was Vice President and General Manager, Asia Pacific. He served as Director of Sales and Marketing, Applied Fluid Technologies Division, from June 2006 until February 2008. Prior to joining Graco, he held various sales and marketing positions, including, most recently, President of Johnson Krumwiede Roads, a full-service advertising agency, and European sales manager at General Motors Corp. He joined the Company in 2006.

David M. Lowe, 59, became Executive Vice President, Industrial Products Division in April 2012. From February 2005 to April 2012, he was Vice President and General Manager, Industrial Products Division. He was Vice President and General Manager, European Operations from September 1999 to February 2005. Prior to becoming Vice President, Lubrication Equipment Division in December 1996, he was Treasurer. Mr. Lowe joined the Company in 1995.

Bernard J. Moreau, 54, is Vice President and General Manager, South and Central America, a position he has held since January 2013. From November 2003 to December 2012, he was Sales and Marketing Director, EMEA, Industrial/Automotive Equipment Division. From January 1997 to October 2003, he was Sales Manager, Middle East, Africa and East Europe. Prior to 1997, he

 

12


Table of Contents

worked in various Graco sales engineering and sales management positions, mainly to support Middle East, Africa and southern Europe territories. He joined the Company in 1985.

Peter J. O’Shea, 50, became Vice President and General Manager, Asia Pacific in January 2013. From January 2012 until December 2012, he was Director of Sales and Marketing, Industrial Products Division, and from 2008 to 2012, he was Director of Sales and Marketing, Industrial Products Division and Applied Fluid Technologies Division. He was Country Manager, Australia - New Zealand from 2005 to 2008, and from 2002 to 2005 he served as Business Development Manager, Australia - New Zealand. Prior to becoming Business Development Manager, Australia - New Zealand, he worked in various Graco sales management positions. Mr. O’Shea joined the Company in 1995.

Charles L. Rescorla, 63, was elected Vice President, Corporate Manufacturing, Distribution Operations and Corporate Development on December 6, 2013. From June 2011 to December 2013, he was Vice President, Corporate Manufacturing, Information Systems and Distribution Operations. He was Vice President, Manufacturing, Information Systems and Distribution Operations from April 2009 to June 2011. He served as Vice President, Manufacturing and Distribution Operations from September 2005 to April 2009. From June 2003 to September 2005, he was Vice President, Manufacturing/Distribution Operations and Information Systems. From April 2001 until June 2003, he was Vice President and General Manager, Industrial/Automotive Equipment Division. Prior to April 2001, he held various positions in manufacturing and engineering management. Mr. Rescorla joined the Company in 1988.

Christian E. Rothe, 41, became Vice President and Treasurer in June 2011. Prior to joining Graco, he held various positions in business development, accounting and finance, including, most recently, at Gardner Denver, Inc., a manufacturer of highly engineered products, as Vice President, Treasurer from January 2011 to June 2011, Vice President - Finance, Industrial Products Group from October 2008 to January 2011, and Director, Strategic Planning and Development from October 2006 to October 2008. Mr. Rothe joined the Company in 2011.

Mark W. Sheahan, 50, became Vice President and General Manager, Applied Fluid Technologies Division in February 2008. He served as Chief Administrative Officer from September 2005 until February 2008, and was Vice President and Treasurer from December 1998 to September 2005. Prior to becoming Treasurer in December 1996, he was Manager, Treasury Services. He joined the Company in 1995.

Brian J. Zumbolo, 45, became Vice President and General Manager, Lubrication Equipment Division in August 2007. He was Director of Sales and Marketing, Lubrication Equipment and Applied Fluid Technologies, Asia Pacific, from November 2006 through July 2007. From February 2005 to November 2006, he was the Director of Sales and Marketing, High Performance Coatings and Foam, Applied Fluid Technologies Division. Mr. Zumbolo was the Director of Sales and Marketing, Finishing Equipment from May 2004 to February 2005. Prior to May 2004, he held various marketing positions in the Industrial Equipment division. Mr. Zumbolo joined the Company in 1999.

Except as otherwise noted above, the Board of Directors elected or re-elected the above executive officers to their current positions on December 7, 2012, effective January 1, 2013.

 

13


Table of Contents

PART II

Item 5. Market for the Company’s Common Equity, Related Shareholder Matters and Issuer Purchases of Equity Securities

Graco Common Stock

Graco common stock is traded on the New York Stock Exchange under the ticker symbol “GGG.” As of February 3, 2015, the share price was $71.65 and there were 58,991,622 shares outstanding and 2,788 common shareholders of record, which includes nominees or broker dealers holding stock on behalf of an estimated 78,000 beneficial owners.

High and low sales prices for the Company’s common stock and dividends declared for each quarterly period in the past two years were as follows:

 

  First
Quarter
  Second
Quarter
  Third
Quarter
  Fourth
Quarter
 

2014

Stock price per share

High

$ 78.97   $ 77.82   $ 79.88   $ 81.93  

Low

  65.18     70.39     72.29     67.06  

Dividends declared per share

  0.28     0.28     0.28     0.30  

2013

Stock price per share

High

$ 59.81   $ 65.43   $ 74.70   $ 79.66  

Low

  52.45     53.90     62.84     72.39  

Dividends declared per share

  0.25     0.25     0.25     0.28  

The graph below compares the cumulative total shareholder return on the common stock of the Company for the last five fiscal years with the cumulative total return of the S&P 500 Index and the Dow Jones US Industrial Machinery Index over the same period (assuming the value of the investment in Graco common stock and each index was $100 on December 25, 2009, and all dividends were reinvested).

 

LOGO

 

2009

2010

2011

2012

2013

2014

Dow Jones US Industrial Machinery

100 136 129 158 231 228

S&P 500

100 115 117 136 180 205

Graco Inc.

100 135 143 181 281 299

 

14


Table of Contents

Issuer Purchases of Equity Securities

On September 14, 2012, the Board of Directors authorized the Company to purchase up to 6,000,000 shares of its outstanding common stock, primarily through open-market transactions. The authorization expires on September 30, 2015.

In addition to shares purchased under the Board authorization, the Company purchases shares of common stock held by employees who wish to tender owned shares to satisfy the exercise price or tax withholding on stock option exercises.

Information on issuer purchases of equity securities follows:

 

Period

Total
Number
of Shares
Purchased
  Average
Price
Paid per
Share
  Total Number of
Shares Purchased
as Part of Publicly
Announced Plans
or Programs
  Maximum Number
of Shares that May
Yet Be Purchased
Under the Plans
or Programs
(at end of period)
 

Sep 27, 2014 - Oct 24, 2014

  277,035   $ 71.11     277,035     2,887,377  

Oct 25, 2014 - Nov 21, 2014

  200,000   $ 78.52     200,000     2,687,377  

Nov 22, 2014 - Dec 26, 2014

  230,000   $ 79.59     230,000     2,457,377  

Item 6. Selected Financial Data

Graco Inc. and Subsidiaries (in thousands, except per share amounts)

 

  2014   2013   2012   2011   2010  

Net sales

$   1,221,130   $   1,104,024   $   1,012,456   $   895,283   $   744,065  

Net earnings

  225,573     210,822     149,126     142,328     102,840  

Per common share

Basic net earnings

$ 3.75   $ 3.44   $ 2.47   $ 2.36   $ 1.71  

Diluted net earnings

  3.65     3.36     2.42     2.32     1.69  

Cash dividends declared

  1.13     1.03     0.93     0.86     0.81  

Total assets

$ 1,544,778   $ 1,327,228   $ 1,321,734   $ 874,309   $ 530,474  

Long-term debt (including current portion)

  615,000     408,370     556,480     300,000     70,255  

Net sales in 2012 included $93 million from Powder Finishing operations acquired in April 2012. The Company used long-term borrowings and available cash balances to complete the $668 million purchase of Powder Finishing and Liquid Finishing businesses in 2012.

 

15


Table of Contents

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following Management’s Discussion and Analysis reviews significant factors affecting the Company’s consolidated results of operations, financial condition and liquidity. This discussion should be read in conjunction with our financial statements and the accompanying notes to the financial statements. The discussion is organized in the following sections:

 

    Overview
    Acquisition and Planned Divestiture
    Results of Operations
    Segment Results
    Financial Condition and Cash Flow
    Critical Accounting Estimates
    Recent Accounting Pronouncements

Overview

Graco designs, manufactures and markets systems and equipment to pump, meter, mix and dispense a wide variety of fluids and coatings. The Company specializes in equipment for applications that involve difficult-to-handle materials with high viscosities, materials with abrasive or corrosive properties and multiple-component materials that require precise ratio control. Graco sells primarily through independent third-party distributors worldwide to industrial and contractor end users. More than half of our sales are outside of the United States. Graco’s business is classified by management into three reportable segments, each responsible for product development, manufacturing, marketing and sales of their products.

Graco’s key strategies include developing and marketing new products, leveraging products and technologies into additional, growing end user markets, expanding distribution globally and completing strategic acquisitions that provide additional channel and technologies. Long-term financial growth targets accompany these strategies, including our expectation of 10 percent revenue growth and 12 percent consolidated net earnings growth. We continued to develop new products in each operating division including products that are expected to drive incremental sales growth, such as the development of equipment for packaging applications as well as continued refresh and upgrades of existing product lines.

In January 2014, the Company paid $65 million cash to acquire QED Environmental Systems, a manufacturer of fluid management solutions for environmental monitoring and remediation, markets where Graco had little or no previous exposure. Results of operations are included in the Company’s Industrial segment starting from the date of acquisition.

In October 2014, we acquired the stock of Alco Valves Group (“Alco”) for £72 million cash. Alco is a United Kingdom based manufacturer of high quality, high pressure valves used in the oil and natural gas industry and in other industrial processes. Alco’s products and business relationships will enhance Graco’s position in the oil and natural gas industry and complement Graco’s core competencies of designing and manufacturing advanced flow control technologies. Results of Alco operations are included in the Company’s Industrial segment starting from the date of acquisition.

Manufacturing is a key competency of the Company. Our management team in Minneapolis provides strategic manufacturing expertise, and is also responsible for factories not fully aligned with a single division. Our primary manufacturing facilities are in the United States and Switzerland, and our primary distribution facilities are located in the United States, Belgium, Switzerland, United Kingdom, P.R.C., Japan, Korea and Australia.

Acquisition and Planned Divestiture of ITW Liquid Finishing Businesses

In April 2012, we purchased the finishing businesses of ITW. The acquisition included finishing equipment operations, technologies and brands of the Powder Finishing and Liquid Finishing businesses. Results of the Powder Finishing businesses have been included in the Industrial segment since the date of acquisition. In March 2012, the FTC issued an order to hold the Liquid Finishing assets separate from our other businesses. In May 2012, the FTC issued a proposed decision and order that required us to sell the held separate Liquid Finishing business assets no later than 180 days from the date the order becomes final. The FTC approved a final decision and order that became effective on October 9, 2014.

Pursuant to the final order, Graco must sell the Liquid Finishing business assets within 180 days of the effective date. On October 8, 2014, the Company announced it had signed a definitive agreement to sell the Liquid Finishing business assets for $590 million cash, subject to regulatory approval and other customary closing conditions. The sale transaction is expected to close in the first half of 2015, in compliance with the FTC’s final decision and order. Graco will continue to hold the Liquid Finishing businesses separate and maintain them as viable and competitive until the sale process is complete.

 

16


Table of Contents

Under terms of the hold separate order, the Company does not have the power to direct the activities of the Liquid Finishing businesses that most significantly impact the economic performance of those businesses. Therefore, we have determined that the Liquid Finishing businesses are variable interest entities for which the Company is not the primary beneficiary and that they should not be consolidated. Furthermore, the Company does not have a controlling interest in the Liquid Finishing businesses, nor is it able to exert significant influence over the Liquid Finishing businesses. Consequently, our investment in the shares of the Liquid Finishing businesses has been reflected as a cost-method investment on our Consolidated Balance Sheets as of December 26, 2014 and December 27, 2013, and their results of operations have not been consolidated with those of the Company. As a cost-method investment, income is recognized based on dividends received from current earnings of Liquid Finishing. Dividends of $28 million received in 2014, $28 million received in 2013 and $12 million received in 2012 are included in other expense (income) on the Consolidated Statements of Earnings. We evaluate our cost-method investment for other-than-temporary impairment at each reporting period. As of December 26, 2014, we evaluated our investment in the Liquid Finishing businesses and determined that there was no impairment.

Results of Operations

Net sales, operating earnings, net earnings and earnings per share were as follows (in millions except per share amounts):

 

  2014   2013   2012  

Net Sales

$   1,221   $   1,104   $   1,012  

Operating Earnings

  309     280     225  

Net Earnings

  226     211     149  

Diluted Net Earnings per Common Share

$ 3.65   $ 3.36   $ 2.42  

2014 Summary:

    Net sales grew by 11 percent, representing growth in all reportable segments and regions, including double digit growth in the Americas.
    Sales from acquired operations totaled $41 million for 2014, contributing 4 percentage points of the growth for the year.
    Changes in currency translation rates reduced sales and net earnings by approximately $3 million and $2 million, respectively.
    Gross profit margin, expressed as a percentage of sales, was 55 percent for the year, slightly lower than 2013 due to the effects of purchase accounting ($2.5 million) and lower margins from acquired operations.
    Investment in new product development was $54 million or 4 percent of sales in 2014.
    Operating expenses increased $30 million over 2013; approximately 75 percent of the increase relates to acquired operations and spending on regional and product growth initiatives.
    Operating earnings were consistent in 2014 and 2013 at 25 percent of sales.
    Other expense (income) included dividends received from the Liquid Finishing businesses that are held separate from the Company’s other businesses. Dividends for 2014 and 2013 were $28 million in each year.
    The effective tax rate was 28 12 percent, up from 27 percent in 2013. The effective rate was lower in 2013 primarily because it included two years of federal R&D credit as the credit was reinstated in the first quarter of 2013 retroactive to the beginning of 2012.
    Cash flows from operations totaled $241 million, compared to $243 million in the prior year; increases in accounts receivable and inventories were in line with volume growth.
    Long-term debt was $615 million at December 26, 2014, compared to $408 million at December 27, 2013.
    Dividends paid totaled $66 million in 2014.
    The Company repurchased $195 million of its stock in 2014 compared to $68 million in 2013.

2013 Summary:

    Net sales grew by 9 percent, including increases of 11 percent in the Americas, 10 percent in EMEA and 3 percent in Asia Pacific. Sales in the Industrial segment grew by 8 percent; sales in the Contractor segment grew by 15 percent and sales in the Lubrication segment decreased by 1 percent.
    First quarter 2013 sales from Powder Finishing operations acquired in April 2012 contributed approximately 3 percentage points to full-year 2013 sales growth.
    Changes in currency translation rates did not have a significant impact on sales or earnings in 2013.
    Gross profit margin as a percentage of sales increased to 55 percent from 54 percent. The effects of realized price increases and higher production volume offset the unfavorable effect of changes in product mix, including the effect of increased Powder Finishing equipment and Contractor segment sales. In 2012, non-recurring purchase accounting effects reduced gross margin for the year by approximately 1 percentage point.
    Investment in new product development was $51 million or 5 percent of sales in 2013.

 

17


Table of Contents
    Total operating expenses increased $2 million over 2012, with increases in product development and selling and marketing activities largely offset by decreases in general and administrative expenses, including a $14 million decrease in acquisition and divestiture costs.
    Operating earnings were 25 percent of sales in 2013 as compared to 22 percent in 2012.
    Other expense (income) included dividends received from the Liquid Finishing businesses that are held separate from the Company’s other businesses. Dividends for 2013 and 2012 totaled $28 million and $12 million, respectively.
    The effective tax rate was 27 percent, down from 31 percent in 2012. The lower rate for 2013 reflected the effects of higher after-tax dividend income received from the Liquid Finishing businesses and the federal R&D credit that was renewed in 2013, effective retroactive to the beginning of 2012. There was no R&D credit recognized in 2012.
    Cash flows from operations grew to $243 million compared to $190 million in the prior year, with increases in working capital in line with volume growth.
    Long-term debt was $408 million at December 27, 2013, compared to $556 million at December 28, 2012.
    Dividends paid totaled $61 million in 2013.
    The Company repurchased $68 million of its stock in 2013 compared to $1 million in 2012.

The following table presents net sales by geographic region (in millions):

  2014   2013   2012  

Americas

$ 684   $ 595   $ 536  

EMEA

  305     283     257  

Asia Pacific

  232     226     219  
  

 

 

    

 

 

    

 

 

 

Total

$   1,221   $   1,104   $   1,012  
  

 

 

    

 

 

    

 

 

 

 

1  North, South and Central America, including the United States. Sales in the United States were $577 million in 2014, $498 million in 2013 and $441 million in 2012.
2  Europe, Middle East and Africa

In 2014, sales in the Americas increased by 15 percent in total, with increases of 18 percent in the Industrial segment, 12 percent in the Contractor segment and 13 percent in the Lubrication segment as compared to the prior year. Sales from acquired operations totaled $32 million in the Americas, contributing 6 percentage points of growth. All of the growth from acquisitions is included the Industrial segment. Excluding acquisitions the Industrial segment grew by 7 percent in the region, with strength broadly across industrial end user markets and successful new product launches. The Contractor segment continues to benefit from the recovery of the U.S. housing and construction markets. Sales in the Lubrication segment reflected double digit growth in both vehicle service applications and industrial lubrication customers.

In 2014, sales in EMEA increased by 8 percent (7 percent at consistent translation rates). Sales in the Industrial segment increased by 9 percent (8 percent at consistent translation rates). Sales increased by 5 percent in the Contractor segment (4 percent at consistent translation rates) and decreased by 1 percent in the Lubrication segment (2 percent at consistent translation rates). Growth in EMEA came primarily from the developed economies in the West. The emerging markets increased slightly over 2013, with gains in Eastern Europe and the Middle East, partially offset by declines in Russia.

In 2014, sales in Asia Pacific grew by 3 percent. Sales increased by 3 percent in the Industrial segment (4 percent at consistent translation rates). Sales in the Contractor segment decreased by 3 percent (4 percent at consistent translation rates) and sales in the Lubrication segment decreased by 7 percent (4 percent at consistent translation rates). China grew by 3 12 percent, with good growth in the automotive industry. However, we continue to see lack of growth in a number of other markets throughout the region and continue to see variability in bookings and billings by country and product line.

In 2013, sales in the Americas increased by 11 percent in total, with increases of 6 percent in the Industrial segment, 22 percent in the Contractor segment and flat in the Lubrication segment as compared to the prior year. The increase in the Americas was led by the Contractor segment, which benefited from growth in U.S. housing starts and construction spending. Increased sales in the Industrial segment were driven by improvement in a variety of general industrial, construction and process-related end-markets. Sales in the Lubrication segment reflected modest demand growth in vehicle service applications and a low rate of investment by industrial lubrication customers.

In 2013, sales in EMEA increased by 10 percent (8 percent at consistent translation rates). Sales in the Industrial segment increased by 12 percent (9 percent at consistent translation rates). Sales increased by 4 percent in the Contractor segment (2 percent at consistent translation rates) and increased by 14 percent in the Lubrication segment (12 percent at consistent translation rates). We saw growth during 2013 in the emerging markets of EMEA, though end-markets in many industries remained weak in Western Europe throughout much of the year.

 

18


Table of Contents

In 2013, sales in Asia Pacific grew by 3 percent (5 percent at consistent translation rates). Sales increased by 7 percent in the Industrial segment (10 percent at consistent translation rates). Sales in the Contractor segment decreased by 4 percent (3 percent at consistent translation rates) and sales in the Lubrication segment decreased by 13 percent (10 percent at consistent translation rates). Industrial project activity was strong in the fourth quarter, which brought the Industrial segment back to modest growth for the year. However, we saw lack of growth in a number of end user markets throughout Asia Pacific, including shipyards, container manufacturing, heavy machinery, general manufacturing, housing, paint and mining.

The following table presents components of net sales change:

 

  2014  
  Segment   Region      
  Industrial   Contractor   Lubrication   Americas   Europe   Asia Pacific   Consolidated  

Volume and Price

  6 %      10 %      9 %      10 %      5 %      2 %      7 %   

Acquisitions

  6 %      -  %      -  %      6 %      2 %      2 %      4 %   

Currency

  -  %      -  %      (1)%      (1)%      1 %      (1)%      -  %   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total

  12 %      10 %      8 %      15 %      8 %      3 %      11 %   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 
  2013  
  Segment   Region      
  Industrial   Contractor   Lubrication   Americas   Europe   Asia Pacific   Consolidated  

Volume and Price

  3 %      14 %      -  %      10 %      2 %      1 %      6 %   

Acquisitions

  5 %      -  %      -  %      1 %      6 %      4 %      3 %   

Currency

  -  %      1 %      (1)%      -  %      2 %      (2)%      -  %   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total

  8 %      15 %      (1)%      11 %      10 %      3 %      9 %   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

The following table presents an overview of components of operating earnings as a percentage of net sales:

 

  2014   2013   2012  

Net Sales

  100.0  %    100.0    100.0 

Cost of products sold

  45.4     45.0     45.6  
  

 

 

   

 

 

   

 

 

 

Gross profit

  54.6     55.0     54.4  

Product development

  4.4     4.7     4.8  

Selling, marketing and distribution

  16.0     16.1     16.2  

General and administrative

  8.9     8.9     11.2  
  

 

 

   

 

 

   

 

 

 

Operating earnings

  25.3     25.3     22.2  

Interest expense

  1.5     1.6     1.9  

Other expense (income), net

  (2.0)      (2.5)      (1.1)   
  

 

 

   

 

 

   

 

 

 

Earnings before income taxes

  25.8     26.2     21.4  

Income taxes

  7.3     7.1     6.7  
  

 

 

   

 

 

   

 

 

 

Net Earnings

  18.5  %    19.1    14.7 
  

 

 

   

 

 

   

 

 

 

2014 Compared to 2013

Operating earnings as a percentage of sales were 25 percent in 2014, consistent with 2013. The impact of purchase accounting, acquisition and divestiture costs, and spending on regional and product expansion offset the improvement in operating expense leverage from higher sales.

Gross profit margin as a percentage of sales decreased approximately one-half percentage point from 2013. Acquisitions negatively impacted the margin rate in 2014, decreasing the rate by 0.2 percentage point for purchase accounting, and 0.3 percentage point for lower margins in the acquired businesses. The favorable effect of realized price increases and higher production volume offset the unfavorable effect of changes in product mix.

Operating expenses for 2014 increased $30 million. The increase included $15 million from acquired operations, $8 million from regional and product expansion initiatives and a $2 million increase in divestiture and acquisition costs. Product development spending increased $3 million (including approximately $1 million from acquired operations), and represents 4 percent of sales, down slightly from 2013.

 

19


Table of Contents

Interest expense was $19 million in 2014, compared to $18 million in 2013. Other expense (income) included dividends received from the Liquid Finishing businesses that are held separate from the Company’s other businesses. These dividends totaled $28 million for the year, consistent with 2013.

The effective income tax rate was 28  12 percent in 2014, compared to 27 percent in 2013. Last year’s effective rate was lower primarily because it included two years of federal R&D credit as the credit was reinstated in the first quarter of 2013 retroactive to the beginning of 2012.

2013 Compared to 2012

Operating earnings as a percentage of sales were 25 percent in 2013 as compared to 22 percent in 2012. Expense leverage and reductions of acquisition and divestiture costs led to the improvements in operating earnings as a percentage of sales.

Gross profit margin as a percentage of sales was 55 percent in 2013 as compared to 54 percent in 2012. The favorable effect of realized price increases and higher production volume offset the unfavorable effect of changes in product mix, including increased sales of powder finishing equipment and Contractor segment sales. For 2012, non-recurring purchase accounting effects reduced the gross margin percentage by approximately 1 percentage point.

Operating expenses for the year increased $2 million over 2012 with business activity-related increases largely offset by decreases in acquisition and divestiture costs in 2013. Acquisition and divestiture costs were $2 million in 2013, as compared to $16 million in 2012. Overall, product development spending was 5 percent of sales in 2013, consistent with 2012.

Interest expense was $18 million in 2013, a decrease of $1 million from 2012. Other expense (income) included dividends received from the Liquid Finishing businesses that are held separate from the Company’s other businesses. Dividends for the year totaled $28 million in 2013 and $12 million in 2012.

The effective income tax rate was 27 percent for the year as compared to 31 percent in 2012. The lower rate for 2013 reflected the effects of higher after-tax dividend income received from the Liquid Finishing businesses and the federal R&D credit that was renewed in 2013, effective retroactive to the beginning of 2012. There was no R&D credit recognized in 2012.

Segment Results

The following table presents net sales and operating earnings by business segment (in millions):

 

  2014   2013   2012  

Sales

Industrial

$ 727   $ 652   $ 603  

Contractor

  376     343     299  

Lubrication

  118     109     110  
  

 

 

    

 

 

    

 

 

 

Total

$   1,221   $   1,104   $   1,012  
  

 

 

    

 

 

    

 

 

 

Operating Earnings

Industrial

$ 225   $ 211   $ 186  

Contractor

  82     72     54  

Lubrication

  26     23     23  

Unallocated corporate

  (24   (26   (38
  

 

 

    

 

 

    

 

 

 

Total

$ 309   $ 280   $ 225  
  

 

 

    

 

 

    

 

 

 

Management looks at economic and financial indicators relevant to each segment and geography to gauge the business environment, as noted in the discussion below for each segment.

 

20


Table of Contents

Industrial

The following table presents net sales, components of net sales change and operating earnings as a percentage of sales for the Industrial segment (dollars in millions):

 

  2014   2013   2012  

Sales

Americas

$ 327   $ 276   $ 261  

EMEA

  224     206     184  

Asia Pacific

  176     170     158  
  

 

 

    

 

 

    

 

 

 

Total

$ 727   $ 652   $ 603  
  

 

 

    

 

 

    

 

 

 
Components of Net Sales Change

Volume and Price

  6 %      3 %      3 %   

Acquisitions

  6 %      5 %      19 %   

Currency

  -  %      -  %      (2)%   
  

 

 

    

 

 

    

 

 

 

Total

  12 %      8 %      20 %   
  

 

 

    

 

 

    

 

 

 
Operating Earnings as a Percentage of Sales   31 %      32 %      31 %   
  

 

 

    

 

 

    

 

 

 

In 2014, sales in the Industrial segment totaled $727 million, an increase of 12 percent from the prior year. Sales for the year increased 18 percent in the Americas, 9 percent in EMEA and 3 percent in Asia Pacific. Results for 2014 included the operations of EcoQuip, acquired at the end of 2013, QED Environmental Systems, acquired at the beginning of fiscal 2014, and Alco, acquired at the beginning of the fourth quarter. Acquired operations contributed $41 million (6 percentage points of growth) in the Industrial segment for the year.

Operating margin rates for 2014 decreased by 1 percentage point compared to last year due to lower margins on acquired operations, including the impact of acquisition-related inventory valuation adjustments, acquisition expense and spending on regional and product expansion.

In 2013, sales in the Industrial segment totaled $652 million, an increase of 8 percent from the prior year. First quarter 2013 sales from the acquired Powder Finishing operations contributed approximately 5 percentage points to the 2013 sales growth. Overall for the Industrial segment, sales increased by 6 percent in the Americas, increased 12 percent in EMEA (9 percent at consistent translation rates) and increased 7 percent in Asia Pacific (10 percent at consistent translation rates).

Operating earnings as a percentage of sales were 32 percent in 2013 as compared to 31 percent in 2012. The effects of purchase accounting related to inventory reduced the operating margin rate for 2012 by approximately 1 percentage point.

In this segment, sales in each geographic region are significant and management looks at economic and financial indicators in each region, including gross domestic product, industrial production, capital investment rates, automobile production, building construction and the level of the U.S. dollar versus the euro, the Swiss franc, the Canadian dollar, the Australian dollar and various Asian currencies.

 

21


Table of Contents

Contractor

The following table presents net sales, components of net sales change and operating earnings as a percentage of sales for the Contractor segment (dollars in millions):

 

  2014   2013   2012  

Sales

Americas

$ 265   $ 237   $ 194  

EMEA

  71     67     64  

Asia Pacific

  40     39     41  
  

 

 

    

 

 

    

 

 

 

Total

$ 376   $ 343   $ 299  
  

 

 

    

 

 

    

 

 

 

Components of Net Sales Change

Volume and Price

  10 %      14 %      4 %   

Currency

  -  %      1 %      (1)%   
  

 

 

    

 

 

    

 

 

 

Total

  10 %      15 %      3 %   
  

 

 

    

 

 

    

 

 

 

Operating Earnings as a Percentage of Sales

  22 %      21 %      18 %   
  

 

 

    

 

 

    

 

 

 

Sales in the Contractor segment increased 10 percent for the year, which included increases of 12 percent in the Americas, 5 percent in EMEA and 3 percent in Asia Pacific. The growth in the Contractor segment was led by the Americas, which continued to benefit from the recovery of the U.S. housing and construction markets.

Operating earnings as a percentage of sales were 22 percent, up 1 percentage point from 2013. Higher sales and the leverage on expenses drove improvements in operating earnings in the Contractor Segment.

In 2013, sales in the Contractor segment increased 15 percent as compared to 2012. By geography, sales increased by 22 percent in the Americas, increased 4 percent in Europe (2 percent at consistent translation rates) and decreased 4 percent in Asia Pacific.

Operating earnings as a percentage of sales were 21 percent in 2013 as compared to 18 percent in 2012. Higher sales and the leveraging of expenses drove the improvement of operating earnings as a percentage of sales.

In this segment, sales in all regions are significant and management reviews economic and financial indicators in each region, including levels of residential, commercial and institutional construction, remodeling rates and interest rates. Management also reviews gross domestic product for the regions and the level of the U.S. dollar versus the euro and other currencies.

Lubrication

The following table presents net sales, components of net sales change and operating earnings as a percentage of sales for the Lubrication segment (dollars in millions):

 

  2014   2013   2012  

Sales

Americas

$ 92   $ 82   $ 81  

EMEA

  10     10     9  

Asia Pacific

  16     17     20  
  

 

 

    

 

 

    

 

 

 

Total

$ 118   $ 109   $ 110  
  

 

 

    

 

 

    

 

 

 

Components of Net Sales Change

Volume and Price

  9 %      -  %      8 %   

Currency

  (1)%      (1)%      (1)%   
  

 

 

    

 

 

    

 

 

 

Total

  8 %      (1)%      7 %   
  

 

 

    

 

 

    

 

 

 

Operating Earnings as a Percentage of Sales

  22 %      21 %      20 %   
  

 

 

    

 

 

    

 

 

 

 

22


Table of Contents

In 2014, sales in the Lubrication segment increased by 8 percent for the year. Sales increased 13 percent in the Americas, decreased 1 percent in EMEA and 7 percent in Asia Pacific.

Operating earnings increased by 1 percentage point in 2014. Higher sales volume and expense leverage led to higher operating margin in the Lubrication segment.

In 2013, sales in the Lubrication segment decreased by 1 percentage point compared to 2012. By geography, sales were flat in the Americas, increased 14 percent in EMEA, and decreased 13 percent in Asia Pacific.

Although the Americas represent the substantial majority of sales for the Lubrication segment, and indicators in that region are the most significant, management monitors indicators such as levels of gross domestic product, capital investment, industrial production and mining activity worldwide.

Unallocated corporate

(in millions)

 

  2014   2013   2012  

Unallocated corporate (expense)

$ (24 $ (26 $ (38

Unallocated corporate includes such items as stock compensation, divestiture and certain acquisition transaction costs, bad debt expense, charitable contributions, certain portions of pension expense, and in 2014, central warehouse startup expenses. In 2014, unallocated corporate expenses included $17 million of stock compensation expense, $3 million of acquisition and divestiture costs, and $2 12 million of contributions to the Company’s charitable foundation, and $1  12 million related to the new central warehouse. In 2013, unallocated corporate included $16 million of stock compensation, $6 million related to the non-service cost portion of pension expense, $2 million related to acquisition/divestiture activities, and $2 million of contributions to the Company’s charitable foundation.

Financial Condition and Cash Flow

Working Capital. The following table highlights several key measures of asset performance (dollars in millions):

 

  2014   2013  

Working capital

$   685   $   624  

Current ratio

  4.9     4.7  

Days of sales in receivables outstanding

  64     60  

Inventory turnover (LIFO)

  3.8     3.8  

Accounts receivable and inventory balances increased in both 2014 and 2013 due to increases in business activity.

Changes in receivables and inventories increased in line with volume growth.

Capital Structure. At December 26, 2014, the Company’s capital structure included current notes payable of $5 million, long-term debt of $615 million and shareholders’ equity of $596 million. At December 27, 2013, the Company’s capital structure included current notes payable of $10 million, long-term debt of $408 million and shareholders’ equity of $634 million.

Shareholders’ equity decreased by $38 million in 2014. The decreases in shareholders’ equity include $195 million of shares repurchased, $67 million of dividends declared, and decreases of $54 million in other comprehensive income (loss) due to pension and post-retirement medical liability adjustments and foreign currency translation. The decreases in shareholders’ equity were offset by current year earnings of $226 million and $30 million for shares issued.

Liquidity and Capital Resources. The Company had cash totaling $24 million at December 26, 2014 and $20 million at December 27, 2013, held in deposit accounts.

In January 2014, the Company paid $65 million cash to acquire QED Environmental Systems, a manufacturer of fluid management solutions for environmental monitoring and remediation, markets where Graco had little or no previous exposure. The acquired business will expand and complement the Company’s Industrial segment.

On June 26, 2014, the Company executed an amendment to its revolving credit agreement, extending the expiration date to June 26, 2019, and increasing the amount of credit available to $500 million, a $50 million increase. The credit facility is with a syndicate of

 

23


Table of Contents

lenders and is available for general corporate purposes, working capital needs, share repurchases and acquisitions. The Company may borrow up to $50 million under the swingline portion of the facility for daily working capital needs.

Under the amended agreement, the base rate applied to borrowings is an annual rate equal to a margin ranging from zero percent to 0.875 percent (down from zero to 1 percent under the prior agreement), depending on the Company’s cash flow leverage ratio, plus the highest of (i) the bank’s prime rate, (ii) the federal funds rate plus 0.5 percent or (iii) one-month LIBOR plus 1.5 percent. In general, LIBOR-based loans bear interest at LIBOR plus 1 percent to 1.875 percent (down from 1 to 2 percent), depending on the Company’s cash flow leverage ratio. Fees on the undrawn amount of the loan commitment decreased to a range of 0.15 percent to 0.30 percent (down from 0.15 percent to 0.40 percent), depending on the Company’s cash flow leverage ratio.

On October 1, 2014, the Company used proceeds from its revolving line of credit to acquire the stock of Alco Valves Group for £72 million cash, subject to normal post-closing purchase price adjustments. Alco is a United Kingdom based manufacturer of high quality, high pressure valves used in the oil and natural gas industry and in other industrial processes. Alco’s products and business relationships will enhance Graco’s position in the oil and natural gas industry and complement Graco’s core competencies of designing and manufacturing advanced flow control technologies. Alco revenues for the most recent trailing twelve months were approximately £19 million. Results of Alco operations have been included in the Company’s Industrial segment starting from the date of acquisition.

Pursuant to a final order from the FTC that became effective on October 9, 2014, Graco must sell the Liquid Finishing business assets acquired in 2012 within 180 days of the effective date. Graco will continue to hold the Liquid Finishing businesses separate and maintain them as viable and competitive until a sale process is complete. The Liquid Finishing business assets are held as a cost-method investment on Graco’s balance sheet, and income is recognized based on dividends received from current earnings. Since the date of acquisition, the Company received $68 million of dividends from current earnings of the Liquid Finishing businesses, including $28 million in 2014. Once the Company completes the sale of its investment, there will be no further dividends from Liquid Finishing.

On October 8, 2014, the Company announced it had signed a definitive agreement to sell the Liquid Finishing business assets for $590 million cash, subject to regulatory approval and other customary closing conditions. The sale transaction is expected to close in the first half of 2015, in compliance with the FTC’s final decision and order. Graco expects to use the proceeds from the sale of the Liquid Finishing assets for reduction of outstanding debt, ongoing share repurchases, and to make investments in strategic acquisitions that provide synergistic opportunities.

On December 26, 2014, the Company had $550 million in lines of credit, including the $500 million revolving credit agreement noted above, of which $200 million was unused. Internally generated funds and unused financing sources are expected to provide the Company with the flexibility to meet its liquidity needs in 2015, including its capital expenditure plan of approximately $35 million, planned dividends (estimated at $70 million) and acquisitions. In January 2015, the Company used proceeds from its revolving line of credit to acquire High Pressure Equipment Holdings, LLC (HiP) for $160 million. The Company completed two additional business acquisitions in January 2015, for cash consideration totaling approximately $20 million. If acquisition opportunities increase, the Company believes that reasonable financing alternatives are available for the Company to execute on those opportunities.

In December 2014, the Company’s Board of Directors increased the Company’s regular common dividend from an annual rate of $1.10 to $1.20 per share, a 9 percent increase.

 

24


Table of Contents

Cash Flow. A summary of cash flow follows (in millions):

 

  2014   2013   2012  

Operating Activities

$ 241   $ 243   $ 190  

Investing Activities

  (217   (31   (695

Financing Activities

  (23   (226   233  

Effect of exchange rates on cash

  3     3     -    
  

 

 

    

 

 

    

 

 

 

Net cash provided (used)

  4     (11   (272
  

 

 

    

 

 

    

 

 

 

Cash and cash equivalents at year-end

$ 24   $ 20   $ 31  
  

 

 

    

 

 

    

 

 

 

Cash Flows From Operating Activities. Net cash provided by operating activities was $241 million in 2014 and $243 million in 2013. The increase in accounts receivable and inventories was $20 million higher in 2014 than the increase in the comparable period of 2013. Accounts receivable and inventory balances have increased since the end of 2013 due to increases in business activity.

Net cash provided by operating activities was $243 million in 2013 and $190 million in 2012. During 2013, changes in receivables and inventories increased in line with volume growth. Net cash provided by operating activities in 2013 was driven by net income of $211 million and adjustments for depreciation and amortization and share-based compensation.

Cash Flows Used in Investing Activities. Cash flows used in investing activities totaled $217 million in 2014, compared to $31 million in 2013. During 2014, cash outflows consisted of acquisitions of $185 million and additions to property, plant and equipment of $31 million. During 2013, cash used in investing activities was $31 million compared to $695 million in 2012. During 2013, cash outflows consisted of $23 million of additions to property, plant and equipment, and business acquisitions of $12 million.

Cash Flows Used in Financing Activities. Cash flows used in financing activities totaled $24 million in 2014, compared to $226 million in 2013. Cash inflows were generated by borrowings on outstanding lines of credit of $202 million and share issuances of $30 million. This was offset by share repurchases of $195 million and dividends paid of $66 million. During 2013, cash used in financing activities was $226 million. Net payments on outstanding lines of credit were $148 million, share repurchases totaled $68 million and cash dividends paid were $61 million in 2013. These cash uses were offset by the issuance of stock of $42 million.

In September 2012, the Board of Directors authorized the Company to purchase up to 6 million shares of its outstanding stock, primarily through open-market transactions. This authorization will expire on September 30, 2015. Under the current authorization, 2.5 million shares remain available for purchase as of December 26, 2014.

The Company repurchased and retired 2.6 million shares at a cost of $195 million in 2014, compared to repurchasing nearly 1 million shares at a cost of $68 million in 2013 and $1 million of share repurchases in 2012. Share repurchases are expected to continue in 2015 with a goal of weighted average dilutive shares outstanding at or below 60 million shares.

Off-Balance Sheet Arrangements and Contractual Obligations. As of December 26, 2014, the Company is obligated to make cash payments in connection with its long-term debt, operating leases and purchase obligations in the amounts listed below. The Company has no significant off-balance sheet debt or other unrecorded obligations other than the items noted in the following table. In addition to the commitments noted in the following table, the Company could be obligated to perform under standby letters of credit totaling $2 million at December 26, 2014. The Company has also guaranteed the debt of its subsidiaries up to $9 million. All debt of subsidiaries is reflected in the consolidated balance sheets.

 

  Payments due by period (in millions)  
  Total   Less than
1 year
  1-3
years
  3-5
years
  More than
5 years
 

Long-term debt

$ 615   $ -   $ -   $ 390   $ 225  

Operating leases

  29     6     9     6     8  

Purchase obligations

  112     112     -     -     -  

Interest on long-term debt

  125     18     37     30     40  

Unfunded pension and postretirement medical benefits

  30     2     5     6     17  
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total

$   911   $   138   $   51   $   432   $   290  
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

 

1  The Company is committed to pay suppliers under the terms of open purchase orders issued in the normal course of business. The Company also has commitments with certain suppliers to purchase minimum quantities, and under the terms of certain agreements, the Company is committed for certain portions of the supplier’s inventory. The Company does not purchase, or commit to purchase, quantities in excess of normal usage or amounts that cannot be used within one year.

 

25


Table of Contents
2  The amounts and timing of future Company contributions to the funded qualified defined benefit pension plan are unknown because they are dependent on pension fund asset performance.

Critical Accounting Estimates

The Company prepares its consolidated financial statements in conformity with generally accepted accounting principles in the United States of America (“U.S. GAAP”). The Company’s most significant accounting policies are disclosed in Note A to the consolidated financial statements. The preparation of the consolidated financial statements, in conformity with U.S. GAAP, requires management to make estimates and judgments that affect the amounts reported in the consolidated financial statements and accompanying notes. Actual amounts will differ from those estimates. The Company considers the following policies to involve the most judgment in the preparation of the Company’s consolidated financial statements.

Excess and Discontinued Inventory. The Company’s inventories are valued at the lower of cost or market. Reserves for excess and discontinued products are estimated. The amount of the reserve is determined based on projected sales information, plans for discontinued products and other factors. Though management considers these balances adequate, changes in sales volumes due to unanticipated economic or competitive conditions are among the factors that would result in materially different amounts for this item.

Goodwill and Other Intangible Assets. The Company performs impairment testing for goodwill and other intangible assets annually, or more frequently if events or changes in circumstances indicate that the asset might be impaired. For goodwill, the Company performs impairment reviews for the Company’s reporting units using a fair-value method based on management’s judgments and assumptions. The Company estimates the fair value of the reporting units by an allocation of market capitalization value, cross-checked by a present value of future cash flows calculation. The estimated fair value is then compared with the carrying amount of the reporting unit, including recorded goodwill. Based on our most recent goodwill impairment assessment performed during the fourth quarter of 2014, the fair value of each reporting unit significantly exceeded its carrying value, except for the businesses acquired in 2014. The fair value of those businesses still exceeded their carrying value, and the results related to the analyses for those businesses are in line with management’s expectations given the recent date of appraisal and purchase price allocation. Accordingly, step two of the impairment analysis was not required.

The Company also performs a separate impairment test for each other intangible asset with indefinite life, based on estimated future use and discounting estimated future cash flows. A considerable amount of management judgment and assumptions are required in performing the impairment tests. Though management considers its judgments and assumptions to be reasonable, changes in economic or market conditions, product offerings or marketing strategies could change the estimated fair values and result in impairment charges.

Income Taxes. In the preparation of the Company’s consolidated financial statements, management calculates income taxes. This includes estimating current tax liability as well as assessing temporary differences resulting from different treatment of items for tax and financial statement purposes. These differences result in deferred tax assets and liabilities, which are recorded on the balance sheet using statutory rates in effect for the year in which the differences are expected to reverse. These assets and liabilities are analyzed regularly and management assesses the likelihood that deferred tax assets will be recoverable from future taxable income. A valuation allowance is established to the extent that management believes that recovery is not likely. Liabilities for uncertain tax positions are also established for potential and ongoing audits of federal, state and international issues. The Company routinely monitors the potential impact of such situations and believes that liabilities are properly stated. Valuations related to amounts owed and tax rates could be impacted by changes to tax codes, changes in statutory rates, the Company’s future taxable income levels and the results of tax audits.

Retirement Obligations. The measurements of the Company’s pension and postretirement medical obligations are dependent on a number of assumptions including estimates of the present value of projected future payments, taking into consideration future events such as salary increase and demographic experience. These assumptions may have an impact on the expense and timing of future contributions.

The assumptions used in developing the required estimates for pension obligations include discount rate, inflation, salary increases, retirement rates, expected return on plan assets and mortality rates. The assumptions used in developing the required estimates for postretirement medical obligations include discount rates, rate of future increase in medical costs and participation rates.

For U.S. plans, the Company establishes its discount rate assumption by reference to a yield curve published by an actuary and projected plan cash flows. For plans outside the U.S., the Company establishes a rate by country by reference to highly rated corporate bonds. These reference points have been determined to adequately match expected plan cash flows. The Company bases its inflation assumption on an evaluation of external market indicators. The salary assumptions are based on actual historical experience, the near-term outlook and assumed inflation. Retirement rates are based on experience. The investment return assumption is based on the expected long-term performance of plan assets. In setting this number, the Company considers the input of actuaries and

 

26


Table of Contents

investment advisors, its long-term historical returns, the allocation of plan assets and projected returns on plan assets. The Company changed its investment return assumption for its U.S. plan to 7.8 percent for 2015. Mortality rates are based on current common group mortality tables for males and females.

Net pension cost in 2014 was $7 million and was allocated to cost of products sold and operating expenses based on salaries and wages. At December 26, 2014, a one-half percentage point decrease in the indicated assumptions would have the following effects (in millions):

 

Assumption

Funded Status   Expense  

Discount rate

$ (29 $ 2  

Expected return on assets

  -       1  

Recent Accounting Pronouncements

In May 2014, the Financial Accounting Standards Board issued a final standard on revenue from contracts with customers. The new standard sets forth a single comprehensive model for recognizing and reporting revenue. The new standard is effective for the Company in its fiscal year 2017, and permits the use of either a retrospective or cumulative effect transition method. The Company is evaluating the effect of the new standard on its consolidated financial statements and related disclosures, and has not yet selected a transition method.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

The Company sells and purchases products and services in currencies other than the U.S. dollar and pays variable interest rates on borrowings under certain credit facilities. Consequently, the Company is subject to profitability risk arising from exchange and interest rate movements. The Company may use a variety of financial and derivative instruments to manage foreign currency and interest rate risks. The Company does not enter into any of these instruments for trading purposes to generate revenue. Rather, the Company’s objective in managing these risks is to reduce fluctuations in earnings and cash flows associated with changes in foreign currency exchange and interest rates.

The Company may use forward exchange contracts, options and other hedging activities to hedge the U.S. dollar value resulting from anticipated currency transactions and net monetary asset and liability positions. At December 26, 2014, the currencies to which the Company had the most significant balance sheet exchange rate exposure were the euro, Swiss franc, Canadian dollar, British pound, Japanese yen, Australian dollar, Chinese yuan renminbi and South Korean won. It is not possible to determine the true impact of currency rate changes; however, the direct translation effect on net sales and net earnings can be estimated. In 2014, changes in currency translation rates reduced sales and earnings by approximately $3 million and $2 million, respectively. Changes in translation rates had no significant effect on 2013 net sales or earnings. In 2012, the effect of the stronger U.S. dollar compared to other currencies (primarily the euro) resulted in a decrease in sales and net earnings of approximately $15 million and $5 million, respectively.

 

27


Table of Contents

2015 Outlook

Worldwide demand levels were resilient throughout 2014. We expect demand levels in 2015 will continue to be supportive of growth in every reportable segment and geography, although currency fluctuations and ongoing geopolitical instability remain a concern. Our long-term growth initiatives continue to be our priority, providing a cornerstone for our mid-single digit organic growth expectations for the first quarter and full year 2015. Acquisitions completed in recent months are expected to add approximately 5 percentage points to the Company’s sales growth in 2015 and provide earnings accretion of 13 to 15 cents per share for the full year before purchase accounting and transaction costs. At current exchange rates, unfavorable movement in foreign currencies would be a headwind of approximately 4 percent on sales and 10 percent on earnings in 2015.

The Company’s backlog is typically small compared to annual sales and is not a good indicator of future business levels. In addition to economic growth, the successful launch of new products and expanded distribution coverage, the sales outlook is dependent on many factors, including realization of price increases and stable foreign currency exchange rates.

Forward-Looking Statements

The Company desires to take advantage of the “safe harbor” provisions regarding forward-looking statements of the Private Securities Litigation Reform Act of 1995 and is filing this Cautionary Statement in order to do so. From time to time various forms filed by our Company with the Securities and Exchange Commission, including this Form 10-K and our Form 10-Qs and Form 8-Ks, and other disclosures, including our 2014 Overview report, press releases, earnings releases, analyst briefings, conference calls and other written documents or oral statements released by our Company, may contain forward-looking statements. Forward-looking statements generally use words such as “expect,” “foresee,” “anticipate,” “believe,” “project,” “should,” “estimate,” “will,” and similar expressions, and reflect our Company’s expectations concerning the future. All forecasts and projections are forward-looking statements. Forward-looking statements are based upon currently available information, but various risks and uncertainties may cause our Company’s actual results to differ materially from those expressed in these statements. The Company undertakes no obligation to update these statements in light of new information or future events.

Future results could differ materially from those expressed, due to the impact of changes in various factors. These risk factors include, but are not limited to: our Company’s growth strategies, which include making acquisitions, investing in new products, expanding geographically and targeting new industries; whether we are able to effectively complete a divestiture of the acquired Liquid Finishing businesses, which has not been completed and remains subject to FTC approval; economic conditions in the United States and other major world economies; changes in currency translation rates; changes in laws and regulations; compliance with anti-corruption laws; new entrants who copy our products or infringe on our intellectual property; risks incident to conducting business internationally; the ability to meet our customers’ needs and changes in product demand; supply interruptions or delays; security breaches; political instability; results of and costs associated with, litigation, administrative proceedings and regulatory reviews incident to our business; the possibility of decline in purchases from few large customers of the Contractor segment; variations in activity in the construction and automotive industries; and natural disasters. Please refer to Item 1A of this Annual Report on Form 10-K for fiscal year 2014 for a more comprehensive discussion of these and other risk factors. Shareholders, potential investors and other readers are urged to consider these factors in evaluating forward-looking statements and are cautioned not to place undue reliance on such forward-looking statements.

Investors should realize that factors other than those identified above and in Item 1A might prove important to the Company’s future results. It is not possible for management to identify each and every factor that may have an impact on the Company’s operations in the future as new factors can develop from time to time.

 

28


Table of Contents

Item 8. Financial Statements and Supplementary Data

Management’s Report on Internal Control Over Financial Reporting

Management is responsible for establishing and maintaining adequate internal control over financial reporting. The internal control system was designed to provide reasonable assurance to management and the board of directors regarding the reliability of financial reporting and preparation of financial statements in accordance with generally accepted accounting principles.

Management assessed the effectiveness of the Company’s internal control over financial reporting as of December 26, 2014. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control-Integrated Framework (2013).

Based on our assessment and those criteria, management believes the Company’s internal control over financial reporting is effective as of December 26, 2014.

The Company’s independent auditors have issued an attestation report on the Company’s internal control over financial reporting. That report appears in this Form 10-K.

 

29


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Shareholders and Board of Directors of

Graco Inc.

We have audited the internal control over financial reporting of Graco Inc. and Subsidiaries (the “Company”) as of December 26, 2014, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed by, or under the supervision of, the company’s principal executive and principal financial officers, or persons performing similar functions, and effected by the company’s board of directors, management, and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of the inherent limitations of internal control over financial reporting, including the possibility of collusion or improper management override of controls, material misstatements due to error or fraud may not be prevented or detected on a timely basis. Also, projections of any evaluation of the effectiveness of the internal control over financial reporting to future periods are subject to the risk that the controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 26, 2014, based on the criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated financial statements and financial statement schedule as of and for the year ended December 26, 2014, of the Company and our report dated February 17, 2015, expressed an unqualified opinion on those consolidated financial statements and financial statement schedule.

/s/ DELOITTE & TOUCHE LLP

Minneapolis, Minnesota

February 17, 2015

 

30


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Shareholders and Board of Directors of

Graco Inc.

We have audited the accompanying consolidated balance sheets of Graco Inc. and Subsidiaries (the “Company”) as of December 26, 2014 and December 27, 2013, and the related consolidated statements of earnings, comprehensive income, shareholders’ equity, and cash flows for each of the three years in the period ended December 26, 2014. Our audits also included the financial statement schedule listed in the Index at Item 15. These financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on the financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of Graco Inc. and Subsidiaries as of December 26, 2014 and December 27, 2013, and the results of their operations and their cash flows for each of the three years in the period ended December 26, 2014, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of December 26, 2014, based on the criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 17, 2015, expressed an unqualified opinion on the Company’s internal control over financial reporting.

/s/ DELOITTE & TOUCHE LLP

Minneapolis, Minnesota

February 17, 2015

 

31


Table of Contents

GRACO INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF EARNINGS

(In thousands except per share amounts)

 

  Years Ended  
  December 26,
2014
  December 27,
2013
  December 28,
2012
 

Net Sales

$ 1,221,130   $ 1,104,024   $ 1,012,456  

Cost of products sold

  554,394     496,569     461,926  
  

 

 

   

 

 

   

 

 

 

Gross Profit

  666,736     607,455     550,530  

Product development

  54,246     51,428     48,921  

Selling, marketing and distribution

  194,751     177,853     163,523  

General and administrative

  108,814     98,405     113,409  
  

 

 

   

 

 

   

 

 

 

Operating Earnings

  308,925     279,769     224,677  

Interest expense

  18,733     18,147     19,273  

Other expense (income), net

  (24,881   (27,200   (11,922
  

 

 

   

 

 

   

 

 

 

Earnings Before Income Taxes

  315,073     288,822     217,326  

Income taxes

  89,500     78,000     68,200  
  

 

 

   

 

 

   

 

 

 

Net Earnings

$ 225,573   $ 210,822   $ 149,126  
  

 

 

   

 

 

   

 

 

 

Basic Net Earnings per Common Share

$ 3.75   $ 3.44   $ 2.47  

Diluted Net Earnings per Common Share

$ 3.65   $ 3.36   $ 2.42  

Cash Dividends Declared per Common Share

$ 1.13   $ 1.03   $ 0.93  

See notes to consolidated financial statements.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(In thousands)

 

  Years Ended  
  December 26,
2014
  December 27,
2013
  December 28,
2012
 

Net Earnings

$ 225,573   $ 210,822   $ 149,126  

Other comprehensive income (loss)

Cumulative translation adjustment

  (27,935   7,812     (3,206

Pension and postretirement medical liability adjustment

  (39,164   46,955     (6,171

Income taxes

Pension and postretirement medical liability adjustment

  12,712     (17,371   2,113  
  

 

 

   

 

 

   

 

 

 

Other comprehensive income (loss)

  (54,387   37,396     (7,264
  

 

 

   

 

 

   

 

 

 

Comprehensive Income

$ 171,186   $ 248,218   $ 141,862  
  

 

 

   

 

 

   

 

 

 

See notes to consolidated financial statements.

 

32


Table of Contents

GRACO INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(In thousands, except share and per share amounts)

 

  December 26,   December 27,  
  2014   2013  

ASSETS

Current Assets

Cash and cash equivalents

$ 23,656   $ 19,756  

Accounts receivable, less allowances of $8,100 and $6,300

  214,944     183,293  

Inventories

  159,797     133,787  

Deferred income taxes

  19,969     18,827  

Investment in businesses held separate

  421,767     422,297  

Other current assets

  19,374     14,633  
  

 

 

   

 

 

 

Total current assets

  859,507     792,593  

Property, Plant and Equipment, net

  161,230     151,717  

Goodwill

  292,574     189,967  

Other Intangible Assets, net

  176,278     147,940  

Deferred Income Taxes

  28,982     20,366  

Other Assets

  26,207     24,645  
  

 

 

   

 

 

 

Total Assets

$ 1,544,778   $ 1,327,228  
  

 

 

   

 

 

 

LIABILITIES AND SHAREHOLDERS’ EQUITY

Current Liabilities

Notes payable to banks

$ 5,016   $ 9,584  

Trade accounts payable

  39,306     34,282  

Salaries and incentives

  40,775     38,939  

Dividends payable

  17,790     16,881  

Other current liabilities

  71,593     69,167  
  

 

 

   

 

 

 

Total current liabilities

  174,480     168,853  

Long-term Debt

  615,000     408,370  

Retirement Benefits and Deferred Compensation

  136,812     94,705  

Deferred Income Taxes

  22,454     20,935  

Commitments and Contingencies (Note K)

Shareholders’ Equity

Common stock, $1 par value; 97,000,000 shares authorized; 59,198,527 and 61,003,203 shares outstanding in 2014 and 2013

  59,199     61,003  

Additional paid-in-capital

  384,704     347,058  

Retained earnings

  252,865     272,653  

Accumulated other comprehensive income (loss)

  (100,736   (46,349
  

 

 

   

 

 

 

Total shareholders’ equity

  596,032     634,365  
  

 

 

   

 

 

 

Total Liabilities and Shareholders’ Equity

$ 1,544,778   $ 1,327,228  
  

 

 

   

 

 

 

See notes to consolidated financial statements.

 

33


Table of Contents

GRACO INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)

 

     Years Ended  
     December 26,
2014
    December 27,
2013
    December 28,
2012
 

Cash Flows From Operating Activities

      

Net earnings

   $ 225,573     $ 210,822     $ 149,126  

Adjustments to reconcile net earnings to net cash provided by operating activities Depreciation and amortization

     35,515       37,316       38,762  

Deferred income taxes

     329       (1,715     (10,786

Share-based compensation

     17,249       16,545       12,409  

Excess tax benefit related to share-based payment arrangements

     (6,634     (8,347     (4,217

Change in

      

Accounts receivable

     (26,557     (11,880     (2,752

Inventories

     (15,079     (10,186     5,941  

Trade accounts payable

     450       2,436       (952

Salaries and incentives

     1,520       2,022       (4,251

Retirement benefits and deferred compensation

     5,052       3,629       3,209  

Other accrued liabilities

     6,151       5,556       3,288  

Other

     (2,314     (3,143     (95
  

 

 

   

 

 

   

 

 

 

Net cash from operating activities

  241,255     243,055     189,682  
  

 

 

   

 

 

   

 

 

 

Cash Flows From Investing Activities

Property, plant and equipment additions

  (30,636   (23,319   (18,234

Acquisition of businesses, net of cash acquired

  (185,462   (11,560   (240,068

Investment in businesses held separate

  530     4,516     (426,813

Proceeds from sale of assets

  -       1,600     -    

Other

  (1,163   (2,475   (9,405
  

 

 

   

 

 

   

 

 

 

Net cash used in investing activities

  (216,731   (31,238   (694,520
  

 

 

   

 

 

   

 

 

 

Cash Flows From Financing Activities

Borrowings (payments) on short-term lines of credit, net

  (4,459   1,280     (619

Borrowings on notes and long-term line of credit

  717,845     419,905     649,325  

Payments on long-term line of credit

  (511,215   (568,122   (392,845

Payments of debt issuance costs

  (890   -       (1,921

Excess tax benefit related to share-based payment arrangements

  6,634     8,347     4,217  

Common stock issued

  30,199     41,664     30,194  

Common stock repurchased

  (195,326   (67,827   (1,378

Cash dividends paid

  (66,362   (61,139   (54,302
  

 

 

   

 

 

   

 

 

 

Net cash from (used in) financing activities

  (23,574   (225,892   232,671  
  

 

 

   

 

 

   

 

 

 

Effect of exchange rate changes on cash

  2,950     2,711     137  
  

 

 

   

 

 

   

 

 

 

Net increase (decrease) in cash and cash equivalents

  3,900     (11,364   (272,030

Cash and Cash Equivalents

Beginning of year

  19,756     31,120     303,150  
  

 

 

   

 

 

   

 

 

 

End of year

$ 23,656   $ 19,756   $ 31,120  
  

 

 

   

 

 

   

 

 

 

See notes to consolidated financial statements.

 

34


Table of Contents

GRACO INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

(In thousands)

 

  Common
Stock
  Additional
Paid-In
Capital
  Retained
Earnings
  Accumulated
Other
Compre-
hensive
Income (Loss)
  Total  

Balance December 30, 2011

$ 59,747   $ 242,007   $ 97,467   $ (76,481 $ 322,740  

Shares issued

  1,048     29,146     -       -       30,194  

Shares repurchased

  (28   (116   (1,234   -       (1,378

Stock compensation cost

  -       11,941     -       -       11,941  

Tax benefit related to stock options exercised

  -       4,817     -       -       4,817  

Net earnings

  -       -       149,126     -       149,126  

Dividends declared

  -       -       (56,062   -       (56,062

Other comprehensive income (loss)

  -       -       -       (7,264   (7,264
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance December 28, 2012

  60,767     287,795     189,297     (83,745   454,114  

Shares issued

  1,196     41,146     -       -       42,342  

Shares repurchased

  (960   (4,545   (64,652   -       (70,157

Stock compensation cost

  -       14,693     -       -       14,693  

Tax benefit related to stock options exercised

  -       8,647     -       -       8,647  

Restricted stock issued

  -       (678   -       -       (678

Net earnings

  -       -       210,822     -       210,822  

Dividends declared

  -       -       (62,814   -       (62,814

Other comprehensive income (loss)

  -       -       -       37,396     37,396  
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance December 27, 2013

  61,003     347,058     272,653     (46,349   634,365  

Shares issued

  789     29,410     -       -       30,199  

Shares repurchased

  (2,593   (14,751   (178,090   -       (195,434

Stock compensation cost

  -       16,253     -       -       16,253  

Tax benefit related to stock options exercised

  -       6,734     -       -       6,734  

Net earnings

  -       -       225,573     -       225,573  

Dividends declared

  -       -       (67,271   -       (67,271

Other comprehensive income (loss)

  -       -       -       (54,387   (54,387
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance December 26, 2014

$ 59,199   $ 384,704   $ 252,865   $ (100,736 $ 596,032  
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

See notes to consolidated financial statements.

 

35


Table of Contents

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Graco Inc. and Subsidiaries

Years Ended December 26, 2014, December 27, 2013 and December 28, 2012

A. Summary of Significant Accounting Policies

Fiscal Year. The fiscal year of Graco Inc. and Subsidiaries (the “Company”) is 52 or 53 weeks, ending on the last Friday in December. The years ended December 26, 2014, December 27, 2013 and December 28, 2012, were 52-week years.

Basis of Statement Presentation. The consolidated financial statements include the accounts of the parent company and its subsidiaries after elimination of intercompany balances and transactions. As of December 26, 2014, all subsidiaries are 100 percent owned.

As more fully described in Note L, the Company purchased the Powder Finishing and Liquid Finishing businesses in April 2012. The FTC issued an order requiring the Company to hold the Liquid Finishing businesses separate from the rest of the Company’s businesses. Under terms of the hold separate order, the Company does not have the power to direct the activities of the Liquid Finishing businesses that most significantly impact the economic performance of those businesses. Therefore, the Company has determined that the Liquid Finishing businesses are variable interest entities for which the Company is not the primary beneficiary, and that they should not be consolidated. Furthermore, the Company does not have a controlling interest in the Liquid Finishing businesses, nor is it able to exert significant influence over the Liquid Finishing businesses. Consequently, the Company’s investment in the shares of the Liquid Finishing businesses, totaling $422 million, has been reflected as a cost-method investment on the Consolidated Balance Sheet as of December 26, 2014, and their results of operations have not been consolidated with those of the Company.

Foreign Currency Translation. The functional currency of certain subsidiaries is the local currency. Accordingly, adjustments resulting from the translation of those subsidiaries’ financial statements into U.S. dollars are charged or credited to accumulated other comprehensive income (loss). The U.S. dollar is the functional currency for all other foreign subsidiaries. Accordingly, gains and losses from the translation of foreign currency balances and transactions of those subsidiaries are included in other expense (income), net.

Accounting Estimates. The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements. Such estimates and assumptions also affect the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Fair Value Measurements. The three levels of inputs in the fair value measurement hierarchy are as follows:

Level 1 – based on quoted prices in active markets for identical assets

Level 2 – based on significant observable inputs

Level 3 – based on significant unobservable inputs

Assets and liabilities measured at fair value on a recurring basis and fair value measurement level were as follows (in thousands):

 

    Level   2014   2013  

Assets

Cash surrender value of life insurance

2 $ 13,187   $ 12,611  

Forward exchange contracts

2   280     291  
     

 

 

    

 

 

 

Total assets at fair value

$   13,467   $   12,902  
     

 

 

    

 

 

 

Liabilities

Deferred compensation

2 $ 2,676   $ 2,296  
     

 

 

    

 

 

 

Contracts insuring the lives of certain employees who are eligible to participate in certain non-qualified pension and deferred compensation plans are held in trust. Cash surrender value of the contracts is based on performance measurement funds that shadow the deferral investment allocations made by participants in certain deferred compensation plans. The deferred compensation liability balances are valued based on amounts allocated by participants to the underlying performance measurement funds.

The Company’s policy and accounting for forward exchange contracts are described below, in Derivative Instruments and Hedging Activities.

 

36


Table of Contents

Disclosures related to other fair value measurements are included below in Impairment of Long-Lived Assets, in Note F (Debt) and in Note J (Retirement Benefits).

Cash Equivalents. All highly liquid investments with a maturity of three months or less at the date of purchase are considered to be cash equivalents.

Accounts Receivable. Accounts receivable includes trade receivables of $207 million in 2014 and $178 million in 2013. Other receivables totaled $8 million in 2014 and $5 million in 2013.

Inventory Valuation. Inventories are stated at the lower of cost or market. The last-in, first-out (LIFO) cost method is used for valuing most U.S. inventories. Inventories of foreign subsidiaries are valued using the first-in, first-out (FIFO) cost method.

Other Current Assets. Amounts included in other current assets were (in thousands):

 

  2014   2013  

Prepaid income taxes

$ 10,849   $ 7,894  

Prepaid expenses and other

  8,525     6,739  
  

 

 

    

 

 

 

Total

$   19,374   $   14,633  
  

 

 

    

 

 

 

Property, Plant and Equipment. For financial reporting purposes, plant and equipment are depreciated over their estimated useful lives, primarily by using the straight-line method as follows:

 

Buildings and improvements 10 to 30 years
Leasehold improvements lesser of 5 to 10 years or life of lease
Manufacturing equipment lesser of 5 to 10 years or life of equipment
Office, warehouse and automotive equipment 3 to 10 years

Goodwill and Other Intangible Assets. Goodwill has been assigned to reporting units. Changes in the carrying amounts of goodwill for each reportable segment were (in thousands):

 

  Industrial   Contractor   Lubrication   Total  

December 26, 2014

               

Beginning balance

$ 157,738   $ 12,732   $ 19,497   $ 189,967  

Additions from business acquisitions

  114,331     -     -     114,331  

Foreign currency translation

  (11,724   -     -     (11,724
  

 

 

    

 

 

    

 

 

    

 

 

 

Ending balance

$ 260,345   $ 12,732   $ 19,497   $ 292,574  
  

 

 

    

 

 

    

 

 

    

 

 

 

December 27, 2013

               

Beginning balance

$ 148,999   $ 12,732   $ 19,497   $ 181,228  

Additions from business acquisitions

  6,626     -     -     6,626  

Foreign currency translation

  2,998     -     -     2,998  

Other

  (885   -     -     (885
  

 

 

    

 

 

    

 

 

    

 

 

 

Ending balance

$ 157,738   $ 12,732   $ 19,497   $ 189,967  
  

 

 

    

 

 

    

 

 

    

 

 

 

 

37


Table of Contents

Components of other intangible assets were (dollars in thousands):

 

  Estimated
Life
(years)
Cost   Accumulated
Amortization
  Foreign
Currency
Translation
  Book
Value
 

December 26, 2014

                 

Customer relationships

3 - 14 $ 143,144   $ (21,948 $ (7,334 $ 113,862  

Patents, proprietary technology and product documentation

3 - 11   18,268     (7,126   (655   10,487  

Trademarks, trade names and other

5   175     (44   -     131  
     

 

 

    

 

 

   

 

 

   

 

 

 
  161,587     (29,118   (7,989   124,480  

Not Subject to Amortization Brand names

  55,265     -     (3,467   51,798  
     

 

 

    

 

 

   

 

 

   

 

 

 

Total

$ 216,852   $ (29,118 $ (11,456 $ 176,278  
     

 

 

    

 

 

   

 

 

   

 

 

 

December 27, 2013

                 

Customer relationships

3 - 14 $ 121,205   $ (26,377 $ 1,458   $ 96,286  

Patents, proprietary technology and product documentation

3 - 11   16,125     (5,869   118     10,374  

Trademarks, trade names and other

5   175     (9   -     166  
     

 

 

    

 

 

   

 

 

   

 

 

 
  137,505     (32,255   1,576     106,826  

Not Subject to Amortization Brand names

  40,400     -     714     41,114  
     

 

 

    

 

 

   

 

 

   

 

 

 

Total

$ 177,905   $ (32,255 $ 2,290   $ 147,940  
     

 

 

    

 

 

   

 

 

   

 

 

 

Amortization of intangibles was $11.6 million in 2014, $12.5 million in 2013 and $15.0 million in 2012. Estimated future annual amortization is as follows (excluding amounts related to businesses acquired subsequent to the end of 2014): $12.4 million in 2015, $12.1 million in 2016, $11.8 million in 2017, $11.7 million in 2018, $11.6 million in 2019 and $64.9 million thereafter.

Other Assets. Components of other assets were (in thousands):

 

  2014   2013  

Cash surrender value of life insurance

$ 13,187   $ 12,611  

Capitalized software

  3,596     3,448  

Equity method investment

  5,859     5,569  

Deposits and other

  3,565     3,017  
  

 

 

    

 

 

 

Total

$   26,207   $   24,645  
  

 

 

    

 

 

 

The Company paid $1.5 million in 2013 for contracts insuring the lives of certain employees who are eligible to participate in certain non-qualified pension and deferred compensation plans. These insurance contracts will be used to fund the non-qualified pension and deferred compensation arrangements. The insurance contracts are held in a trust and are available to general creditors in the event of the Company’s insolvency. Changes in cash surrender value are recorded in operating expense and were not significant in 2014 and 2012. In 2013, increases in cash surrender value totaled $1.6 million and were offset by expenses related to the non-qualified pension and deferred compensation plans funded by the insurance contracts.

Capitalized software is amortized over its estimated useful life (generally 2 to 5 years) beginning at date of implementation.

Impairment of Long-Lived Assets. The Company evaluates long-lived assets (including property and equipment, goodwill and other intangible assets) for impairment whenever events or changes in business circumstances indicate the carrying value of the assets may not be recoverable. Goodwill and other intangible assets not subject to amortization are also reviewed for impairment annually in the fourth quarter. There were no write-downs of long-lived assets in the periods presented.

 

38


Table of Contents

Other Current Liabilities. Components of other current liabilities were (in thousands):

 

  2014   2013  

Accrued self-insurance retentions

$ 7,089   $ 6,381  

Accrued warranty and service liabilities

  7,609     7,771  

Accrued trade promotions

  7,697     7,245  

Payable for employee stock purchases

  9,126     7,908  

Customer advances and deferred revenue

  8,918     11,693  

Income taxes payable

  5,997     4,561  

Other

  25,157     23,608  
  

 

 

    

 

 

 

Total

$   71,593   $   69,167  
  

 

 

    

 

 

 

Self-Insurance. The Company is self-insured for certain losses and costs relating to product liability, workers’ compensation and employee medical benefits claims. The Company has purchased stop-loss coverage in order to limit its exposure to significant claims. Accrued self-insured retentions are based on claims filed and estimates of claims incurred but not reported.

Product Warranties. A liability is established for estimated future warranty and service claims that relate to current and prior period sales. The Company estimates warranty costs based on historical claim experience and other factors including evaluating specific product warranty issues. Following is a summary of activity in accrued warranty and service liabilities (in thousands):

 

  2014   2013  

Balance, beginning of year

$ 7,771   $ 7,943  

Assumed in business acquisition

  12     -  

Charged to expense

  6,069     6,119  

Margin on parts sales reversed

  1,920     3,819  

Reductions for claims settled

  (8,163   (10,110
  

 

 

    

 

 

 

Balance, end of year

$ 7,609   $ 7,771  
  

 

 

    

 

 

 

Revenue Recognition. Sales are recognized when revenue is realized or realizable and has been earned. The Company’s policy is to recognize revenue when risk and title passes to the customer. This is generally on the date of shipment, however certain sales have terms requiring recognition when received by the customer. In cases where there are specific customer acceptance provisions, revenue is recognized at the later of customer acceptance or shipment (subject to shipping terms). Payment terms are established based on the type of product, distributor capabilities and competitive market conditions. Rights of return are typically contractually limited, amounts are estimable, and the Company records provisions for anticipated returns and warranty claims at the time revenue is recognized. Historically, sales returns have been approximately 2 percent of sales. Provisions for sales returns are recorded as a reduction of net sales, and provisions for warranty claims are recorded in selling, marketing and distribution expenses. From time to time, the Company may promote the sale of new products by agreeing to accept returns of superseded products. In such cases, provisions for estimated returns are recorded as a reduction of net sales.

Trade promotions are offered to distributors and end users through various programs, generally with terms of one year or less. Such promotions include cooperative advertising arrangements, rebates based on annual purchases and sales growth, coupons and reimbursement for competitive products. Payment of incentives may take the form of cash, trade credit, promotional merchandise or free product. Under cooperative advertising arrangements, the Company reimburses the distributor for a portion of its advertising costs related to the Company’s products; estimated costs are accrued at the time of sale and classified as selling, marketing and distribution expense. Rebates are accrued based on the program rates and progress toward the estimated annual sales amount and sales growth, and are recorded as a reduction of sales (cash, trade credit) or cost of products sold (free goods). The estimated costs related to coupon programs are accrued at the time of sale and classified as selling, marketing and distribution expense or cost of products sold, depending on the type of incentive offered.

Shipping and Handling. Shipping and handling costs incurred for the delivery of goods to customers are included in cost of goods sold in the accompanying Consolidated Statements of Income. Amounts billed to customers for shipping and handling are included in net sales.

Earnings Per Common Share. Basic net earnings per share is computed by dividing earnings available to common shareholders by the weighted average number of shares outstanding during the year. Diluted net earnings per share is computed after giving effect to the exercise of all dilutive outstanding option grants.

 

39


Table of Contents

Comprehensive Income. Comprehensive income is a measure of all changes in shareholders’ equity except those resulting from investments by and distributions to owners, and includes such items as net earnings, certain foreign currency translation items, changes in the value of qualifying hedges and pension liability adjustments.

Derivative Instruments and Hedging Activities. The Company accounts for all derivatives, including those embedded in other contracts, as either assets or liabilities and measures those financial instruments at fair value. The accounting for changes in the fair value of derivatives depends on their intended use and designation.

As part of its risk management program, the Company may periodically use forward exchange contracts to manage known market exposures. Terms of derivative instruments are structured to match the terms of the risk being managed and are generally held to maturity. The Company does not hold or issue derivative financial instruments for trading purposes. All other contracts that contain provisions meeting the definition of a derivative also meet the requirements of, and have been designated as, normal purchases or sales. The Company’s policy is to not enter into contracts with terms that cannot be designated as normal purchases or sales.

The Company periodically evaluates its monetary asset and liability positions denominated in foreign currencies. The Company enters into forward contracts or options, or borrows in various currencies, in order to hedge its net monetary positions. These instruments are recorded at fair value and the gains and losses are included in other expense, net. The notional amounts of contracts outstanding as of December 26, 2014 totaled $22 million. The Company believes it uses strong financial counterparties in these transactions and that the resulting credit risk under these hedging strategies is not significant.

The Company uses significant other observable inputs (level 2 in the fair value hierarchy) to value the derivative instruments used to hedge interest rate volatility and net monetary positions, including reference to market prices and financial models that incorporate relevant market assumptions. The fair market value and balance sheet classification of such instruments follows (in thousands):

 

   Balance Sheet Classification        2014                 2013          

Gain (loss) on foreign currency forward contracts

Gains

$ 280    $ 306  

Losses

  -     (15)   
     

 

 

    

 

 

 

Net

Accounts receivable $ 280   $ 291  
     

 

 

    

 

 

 

Recent Accounting Pronouncements. In May 2014, the Financial Accounting Standards Board issued a final standard on revenue from contracts with customers. The new standard sets forth a single comprehensive model for recognizing and reporting revenue. The new standard is effective for the Company in its fiscal year 2017, and permits the use of either a retrospective or a cumulative effect transition method. The Company is evaluating the effect of the new standard on its consolidated financial statements and related disclosures, and has not yet selected a transition method.

B. Segment Information

The Company has three reportable segments: Industrial (which aggregates six operating segments), Contractor and Lubrication. The Industrial segment markets equipment and pre-engineered packages for moving and applying paints, coatings, sealants, adhesives and other fluids. Markets served include automotive and vehicle assembly and components production, wood and metal products, process, rail, marine, aerospace, farm, construction, bus, recreational vehicles, oil and natural gas, and various other industries. The Contractor segment markets sprayers for architectural coatings for painting, corrosion control, texture, and line striping. The Lubrication segment markets products to move and dispense lubricants for fast oil change facilities, service garages, fleet service centers, automobile dealerships, the mining industry and industrial lubrication applications. All segments market parts and accessories for their products.

The accounting policies of the segments are the same as those described in the summary of significant accounting policies. The cost of manufacturing for each segment is based on product cost, and expenses are based on actual costs incurred along with cost allocations of shared and centralized functions based on activities performed, sales or space utilization. Depreciation expense is charged to the manufacturing or operating cost center that utilizes the asset, and is then allocated to segments on the same basis as other expenses within that cost center.

Reportable segments are defined by product. Segments are responsible for development, manufacturing, marketing and sales of their products. This allows for focused marketing and efficient product development. The segments share common purchasing, certain manufacturing, distribution and administration functions.

 

40


Table of Contents

Reportable Segments (in thousands)

      2014        

 

      2013        

 

      2012        

 

Net Sales

Industrial

$ 727,389   $ 652,344   $ 603,398  

Contractor

  375,574     342,546     298,811  

Lubrication

  118,167     109,134     110,247  
  

 

 

   

 

 

   

 

 

 

Total

$ 1,221,130   $ 1,104,024   $ 1,012,456  
  

 

 

   

 

 

   

 

 

 

Operating Earnings

Industrial

$ 225,337   $ 211,265   $ 186,129  

Contractor

  81,892     72,245     54,310  

Lubrication

  26,403     22,512     22,535  

Unallocated corporate (expense)

  (24,707   (26,253   (38,297
  

 

 

   

 

 

   

 

 

 

Total

$ 308,925   $ 279,769   $ 224,677  
  

 

 

   

 

 

   

 

 

 

Assets

Industrial

$ 770,623   $ 591,135  

Contractor

  176,757     152,300  

Lubrication

  83,148     82,503  

Unallocated corporate

  514,250     501,290  
  

 

 

   

 

 

   

Total

$ 1,544,778   $ 1,327,228  
  

 

 

   

 

 

   

Unallocated corporate (expense) is not included in management’s measurement of segment performance and includes such items as stock compensation, divestiture and certain acquisition transaction costs, bad debt expense, charitable contributions, certain portions of pension expense and in 2014, central warehouse startup expenses. Unallocated assets include cash, allowances and valuation reserves, deferred income taxes, certain capital items and other assets.

 

Geographic Information (in thousands)

      2014        

 

      2013        

 

      2012        

 

Net Sales (based on customer location)

United States

$ 577,359   $ 498,478   $ 440,757  

Other countries

  643,771     605,546     571,699  
  

 

 

    

 

 

    

 

 

 

Total

$ 1,221,130   $ 1,104,024   $ 1,012,456  
  

 

 

    

 

 

    

 

 

 

Long-lived Assets

United States

$ 131,131   $ 120,262  

Other countries

  30,099     31,455  
  

 

 

    

 

 

    

Total

$ 161,230   $ 151,717  
  

 

 

    

 

 

    

Sales to Major Customers

There were no customers that accounted for 10 percent or more of consolidated sales in 2014, 2013 or 2012.

 

41


Table of Contents

C. Inventories

Major components of inventories were as follows (in thousands):

 

  2014   2013  

Finished products and components

$ 87,384   $ 65,963  

Products and components in various stages of completion

  47,682     41,458  

Raw materials and purchased components

  69,212     69,051  
  

 

 

    

 

 

 
  204,278     176,472  

Reduction to LIFO cost

  (44,481   (42,685
  

 

 

    

 

 

 

Total

$   159,797   $   133,787  
  

 

 

    

 

 

 

Inventories valued under the LIFO method were $84.0 million in 2014 and $76.9 million in 2013. All other inventory was valued on the FIFO method.

D. Property, Plant and Equipment

Property, plant and equipment were as follows (in thousands):

 

  2014   2013  

Land and improvements

$ 16,311   $ 16,506  

Buildings and improvements

  123,126     118,460  

Manufacturing equipment

  242,978     222,810  

Office, warehouse and automotive equipment

  39,219     35,887  

Additions in progress

  12,117     14,224  
  

 

 

    

 

 

 

Total property, plant and equipment

  433,751     407,887  

Accumulated depreciation

  (272,521   (256,170
  

 

 

    

 

 

 

Net property, plant and equipment

$ 161,230   $ 151,717  
  

 

 

    

 

 

 

Depreciation expense was $24.1 million in 2014, $23.4 million in 2013 and $22.2 million in 2012.

E. Income Taxes

Earnings before income tax expense consist of (in thousands):

 

  2014   2013   2012  

Domestic

$ 266,627   $ 238,928   $ 184,132  

Foreign

  48,446     49,894     33,194  
  

 

 

    

 

 

    

 

 

 

Total

$   315,073   $   288,822   $   217,326  
  

 

 

    

 

 

    

 

 

 

 

42


Table of Contents

Income tax expense consists of (in thousands):

 

  2014   2013   2012  

Current

Domestic

Federal

$ 73,584   $ 64,753   $ 61,989  

State and local

  2,775     2,470     5,180  

Foreign

  12,263     11,569     11,218  
  

 

 

    

 

 

    

 

 

 
  88,622     78,792     78,387  
  

 

 

    

 

 

    

 

 

 

Deferred

Domestic

  2,497     (553   (5,431

Foreign

  (1,619   (239   (4,756
  

 

 

    

 

 

    

 

 

 
  878     (792   (10,187
  

 

 

    

 

 

    

 

 

 

Total

$ 89,500   $ 78,000   $ 68,200  
  

 

 

    

 

 

    

 

 

 

Income taxes paid were $92.1 million, $78.0 million and $71.7 million in 2014, 2013 and 2012.

A reconciliation between the U.S. federal statutory tax rate and the effective tax rate follows:

 

  2014   2013   2012  

Statutory tax rate

  35   35   35

Tax effect of international operations

  (1   (1   (1

State taxes, net of federal effect

  1      1      1  

U.S. general business tax credits

  (1   (2   -    

Domestic production deduction

  (3   (3   (2

Dividends from Liquid Finishing

  (3   (3   (2
  

 

 

   

 

 

   

 

 

 

Effective tax rate

  28   27   31
  

 

 

   

 

 

   

 

 

 

Deferred income taxes are provided for temporary differences between the financial reporting and the tax basis of assets and liabilities. The deferred tax assets (liabilities) resulting from these differences are as follows (in thousands):

 

  2014   2013  

Inventory valuations

$ 9,163   $ 8,825  

Self-insurance retention accruals

  2,098     1,887  

Warranty reserves

  2,074     2,089  

Vacation accruals

  3,023     2,740  

Bad debt reserves

  2,409     1,961  

Other

  1,202     1,325  
  

 

 

    

 

 

 

Deferred income taxes, current

  19,969     18,827  

Included in other current liabilities

  (1,743   (1,095
  

 

 

    

 

 

 

Total Current

  18,226     17,732  
  

 

 

    

 

 

 

Unremitted earnings of consolidated foreign subsidiaries

  (7,316   (6,316

Excess of tax over book depreciation

  (50,664   (42,322

Pension liability

  35,247     20,798  

Postretirement medical

  7,743     8,097  

Acquisition costs

  3,369     3,644  

Stock compensation

  16,657     14,401  

Deferred compensation

  1,350     1,193  

Other

  142     (64
  

 

 

    

 

 

 

Total Non-current

  6,528     (569
  

 

 

    

 

 

 

Net deferred tax assets

$ 24,754   $ 17,163  
  

 

 

    

 

 

 

 

43


Table of Contents

Total deferred tax assets were $95.3 million and $78.6 million, and total deferred tax liabilities were $70.6 million and $61.4 million on December 26, 2014 and December 27, 2013. The difference between the deferred income tax provision and the change in net deferred income taxes is due to the change in other comprehensive income (loss) items and the impact of acquisitions.

The Company files income tax returns in the U.S. federal jurisdiction, and various states and foreign jurisdictions. With few exceptions, the Company is no longer subject to U.S. federal, state and local, or non-U.S. income tax examinations by tax authorities for years before 2008.

The Company records penalties and accrued interest related to uncertain tax positions in income tax expense. Total reserves for uncertain tax positions were not material.

F. Debt

A summary of debt follows (dollars in thousands):

 

  Average
Interest Rate
December 26,
2014
  Maturity   2014   2013  

Private placement unsecured fixed-rate notes

Series A

  4.00   March 2018    $ 75,000   $ 75,000  

Series B

  5.01   March 2023      75,000     75,000  

Series C

  4.88   January 2020      75,000     75,000  

Series D

  5.35   July 2026      75,000     75,000  

Unsecured revolving credit facility

  1.28   June 2019      315,000     108,370  

Notes payable to banks

  0.85   2015      5,016     9,584  
       

 

 

    

 

 

 

Total debt, including current portion

$   620,016   $   417,954  
       

 

 

    

 

 

 

The estimated fair value of debt with fixed interest rates was $330 million on December 26, 2014 and $320 million on December 27, 2013. The fair value of variable rate borrowings approximates carrying value. The Company uses significant other observable inputs to estimate fair value (level 2 of the fair value hierarchy) based on the present value of future cash flows and rates that would be available for issuance of debt with similar terms and remaining maturities.

On June 26, 2014, the Company executed an amendment to its revolving credit agreement, extending the expiration date to June 26, 2019. The amended agreement with a syndicate of lenders provides up to $500 million of committed credit, available for general corporate purposes, working capital needs, share repurchases and acquisitions. The Company may borrow up to $50 million under the swingline portion of the facility for daily working capital needs.

Under terms of the amended revolving credit agreement, loans denominated in U.S. dollars bear interest, at the Company’s option, at either a base rate or a LIBOR-based rate. Loans denominated in currencies other than U.S. dollars bear interest at a LIBOR-based rate. The base rate is an annual rate equal to a margin ranging from zero percent to 0.875 percent, depending on the Company’s cash flow leverage ratio (debt to earnings before interest, taxes, depreciation, amortization and extraordinary non-operating or non-cash charges and expenses) plus the highest of (i) the bank’s prime rate, (ii) the federal funds rate plus 0.5 percent or (iii) one-month LIBOR plus 1.5 percent. In general, LIBOR-based loans bear interest at LIBOR plus 1 percent to 1.875 percent, depending on the Company’s cash flow leverage ratio. The Company is also required to pay a fee on the undrawn amount of the loan commitment at an annual rate ranging from 0.15 percent to 0.30 percent, depending on the Company’s cash flow leverage ratio.

On December 26, 2014, the Company had $550 million in lines of credit, including the $500 million in committed credit facilities described above and $50 million with foreign banks. The unused portion of committed credit lines was $200 million as of December 26, 2014. In addition, the Company has unused, uncommitted lines of credit with foreign banks totaling $31 million. Borrowing rates under these credit lines vary with the prime rate, rates on domestic certificates of deposit and the London Interbank market. The Company pays facility fees of up to 0.15 percent per annum on certain of these lines. No compensating balances are required.

Various debt agreements require the Company to maintain certain financial ratios as to cash flow leverage and interest coverage. The Company is in compliance with all financial covenants of its debt agreements.

 

44


Table of Contents

Annual maturities of debt are as follows (in thousands):

 

            
 

          2015

   $ 5,016  
 

          2016

     -    
 

          2017

     -    
 

          2018

     75,000  
 

          2019

     315,000  
 

Thereafter

     225,000  

Interest paid on debt during 2014, 2013 and 2012 was $18.6 million, $18.3 million and $19.0 million.

G. Shareholders’ Equity

At December 26, 2014, the Company had 22,549 authorized, but not issued, cumulative preferred shares, $100 par value. The Company also has authorized, but not issued, a separate class of 3 million shares of preferred stock, $1 par value.

Changes in components of accumulated other comprehensive income (loss), net of tax were (in thousands):

 

     Pension
and Post-
retirement
Medical
     Cumulative
Translation
Adjustment
     Total  

2012

                    

Beginning balance

   $ (75,658    $ (823    $ (76,481

Other comprehensive income (loss)
before reclassifications

     (10,993      (3,206      (14,199

Amounts reclassified from accumulated
other comprehensive income

     6,935        -          6,935  
  

 

 

    

 

 

    

 

 

 

Ending balance

$ (79,716 $ (4,029 $ (83,745
  

 

 

    

 

 

    

 

 

 

2013

           

Beginning balance

$ (79,716 $ (4,029 $ (83,745

Other comprehensive income (loss)
before reclassifications

  23,103     7,812     30,915  

Amounts reclassified from accumulated
other comprehensive income

  6,481     -       6,481  
  

 

 

    

 

 

    

 

 

 

Ending balance

$ (50,132 $ 3,783   $ (46,349
  

 

 

    

 

 

    

 

 

 

2014

           

Beginning balance

$ (50,132 $ 3,783   $ (46,349

Other comprehensive income (loss)
before reclassifications

  (29,563   (27,935   (57,498

Amounts reclassified from accumulated
other comprehensive income

  3,111     -       3,111  
  

 

 

    

 

 

    

 

 

 

Ending balance

$ (76,584 $ (24,152 $ (100,736
  

 

 

    

 

 

    

 

 

 

 

45


Table of Contents

Amounts related to pension and postretirement medical adjustments are reclassified to pension cost, which is allocated to cost of products sold and operating expenses based on salaries and wages, approximately as follows (in thousands):

 

  2014   2013   2012  

Cost of products sold

$ 1,701   $ 3,635   $ 3,900  

Product development

  714     1,699     1,728  

Selling, marketing and distribution

  1,371     2,828     2,886  

General and administrative

  820     2,124     2,032  
  

 

 

    

 

 

    

 

 

 

Total before tax

$ 4,606   $ 10,286   $ 10,546  

Income tax (benefit)

  (1,495   (3,805   (3,611
  

 

 

    

 

 

    

 

 

 

Total after tax

$ 3,111   $ 6,481   $ 6,935  
  

 

 

    

 

 

    

 

 

 

H. Share-Based Awards, Purchase Plans and Compensation Cost

Stock Option and Award Plan. The Company has a stock incentive plan under which it grants stock options and share awards to directors, officers and other employees. Option price is the market price on the date of grant. Options become exercisable at such time, generally over three or four years, and in such installments as set by the Company, and expire ten years from the date of grant.

Restricted share awards have been made to certain key employees under the plan. The market value of restricted stock at the date of grant is charged to operations over the vesting period. Compensation cost charged to operations for restricted share awards was $0.3 million in 2014, $0.5 million in 2013 and $0.4 million in 2012. Individual nonemployee directors of the Company may elect to receive, either currently or deferred, all or part of their annual retainer, and/or payment for attendance at Board or Committee meetings, in the form of shares of the Company’s common stock instead of cash. Under this arrangement, the Company issued 4,867 shares in 2014, 6,079 shares in 2013 and 7,656 shares in 2012. The expense related to this arrangement is not significant. The Company has a stock appreciation plan that provides for payments of cash to eligible foreign employees based on the change in the market price of the Company’s common stock over a period of time. Compensation cost related to this plan was $1.0 million in 2014, $1.9 million in 2013 and $0.5 million in 2012.

Options on common shares granted and outstanding, as well as the weighted average exercise price, are shown below (in thousands, except exercise prices):

 

                                                                                           
  Option
Shares
Weighted
Average
Exercise
Price
  Options
Exercisable
Weighted
Average
Exercise
Price

Outstanding, December 30, 2011

  5,478   $ 32.12      3,211    $ 32.27   

Granted

  566     50.33   

Exercised

  (805   27.14   

Canceled

  (47   35.24   
  

 

 

 

  

 

 

    

 

 

 

  

 

 

 

Outstanding, December 28, 2012

  5,192     34.85      3,194      32.99   

Granted

  969     65.97   

Exercised

  (990   33.04   

Canceled

  (22   40.71   
  

 

 

 

  

 

 

    

 

 

 

  

 

 

 

Outstanding, December 27, 2013

  5,149     41.03      3,311      33.20   

Granted

  475     74.62   

Exercised

  (607   35.73   

Canceled

  (42   61.35   
  

 

 

 

  

 

 

    

 

 

 

  

 

 

 

Outstanding, December 26, 2014

  4,975   $ 44.72      3,318    $ 34.86   
  

 

 

 

  

 

 

    

 

 

 

  

 

 

 

 

46


Table of Contents

The following table summarizes information for options outstanding and exercisable at December 26, 2014 (in thousands, except exercise prices and contractual term amounts):

 

  Range of  
Prices

Options
Outstanding
  Options
Outstanding
Weighted Avg.
Remaining
Contractual Term
in Years
Options
Outstanding
Weighted Avg.
Exercise Price
  Options
Exercisable
  Options
Exercisable
Weighted Avg.
Exercise Price
 
$  16-30   1,352   4 $ 23.60     1,352   $ 23.60  
$  30-45   1,585   4   39.31     1,458     39.01  
$  45-60   1,177   7   53.99     491     52.24  
$  60-76   861   9   75.19     17     74.89  

 

 

 

 

   

 

 

 

 

   

 

 

   

 

 

 
$  16-76   4,975   6 $ 44.72     3,318   $ 34.86  

 

 

 

 

   

 

 

 

 

   

 

 

   

 

 

 

The aggregate intrinsic value of exercisable option shares was $154.5 million as of December 26, 2014, with a weighted average contractual term of 4.6 years. There were approximately 4.9 million vested share options and share options expected to vest as of December 26, 2014, with an aggregate intrinsic value of $182.2 million, a weighted average exercise price of $44.50 and a weighted average contractual term of 5.8 years.

Information related to options exercised follows (in thousands):

 

  2014   2013   2012  

Cash received

$   20,343   $   33,630   $   21,687  

Aggregate intrinsic value

  25,284     33,028     18,195  

Tax benefit realized

  8,200     11,200     6,200  

Stock Purchase Plan. Under the Company’s Employee Stock Purchase Plan, the purchase price of the shares is the lesser of 85 percent of the fair market value on the first day or the last day of the plan year. The Company issued 193,084 shares under this plan in 2014, 196,913 shares in 2013 and 238,621 shares in 2012.

Authorized Shares. Shares authorized for issuance under the stock option and purchase plans are shown below (in thousands):

 

  Total Shares
Authorized
  Available for Future
Issuance as of
December 26, 2014
 

Stock Incentive Plan (2010)

  5,100     2,031  

Employee Stock Purchase Plan (2006)

  7,000     5,094  
  

 

 

    

 

 

 

Total

  12,100     7,125  
  

 

 

    

 

 

 

Amounts available for future issuance exclude outstanding options. Options outstanding as of December 26, 2014, include options granted under three plans that were replaced by subsequent plans. No shares are available for future grants under those plans.

Share-based Compensation. The Company recognized share-based compensation cost of $17.2 million in 2014, $16.5 million in 2013 and $12.4 million in 2012, which reduced net income by $12.8 million, or $0.21 per weighted diluted common share in 2014, $12.6 million, or $0.20 per weighted diluted common share in 2013 and $9.5 million, or $0.15 per weighted diluted common share in 2012. As of December 26, 2014, there was $13.7 million of unrecognized compensation cost related to unvested options, expected to be recognized over a weighted average period of approximately 1.6 years.

 

47


Table of Contents

The fair value of each option grant is estimated on the date of grant using the Black-Scholes option-pricing model with the following weighted average assumptions and results:

 

  2014   2013   2012  

Expected life in years

  6.5     5.9     6.5  

Interest rate

  2.0   1.3   1.3

Volatility

  36.1   35.4   36.6

Dividend yield

  1.5   1.6   1.8

Weighted average fair value per share

$   24.83   $   19.44   $   15.60  

Expected life is estimated based on vesting terms and exercise and termination history. Interest rate is based on the U.S. Treasury rate on zero-coupon issues with a remaining term equal to the expected life of the option. Expected volatility is based on historical volatility over a period commensurate with the expected life of options.

The fair value of employees’ purchase rights under the Employee Stock Purchase Plan was estimated on the date of grant. The benefit of the 15 percent discount from the lesser of the fair market value per common share on the first day and the last day of the plan year was added to the fair value of the employees’ purchase rights determined using the Black-Scholes option-pricing model with the following assumptions and results:

 

  2014   2013   2012  

Expected life in years

  1.0     1.0     1.0  

Interest rate

  0.1   0.2   0.2

Volatility

  21.4   26.0   40.6

Dividend yield

  1.4   1.7   1.7

Weighted average fair value per share

$   17.81   $   14.16   $   15.58  

I. Earnings per Share

The following table sets forth the computation of basic and diluted earnings per share (in thousands, except per share amounts):

 

  2014   2013   2012  

Net earnings available to common shareholders

$   225,573   $   210,822   $   149,126  
  

 

 

    

 

 

    

 

 

 

Weighted average shares outstanding for basic earnings per share

  60,148     61,203     60,451  

Dilutive effect of stock options computed based on the treasury stock method using the average market price

  1,597     1,587     1,260  
  

 

 

    

 

 

    

 

 

 

Weighted average shares outstanding for diluted earnings per share

  61,745     62,790     61,711  
  

 

 

    

 

 

    

 

 

 

Basic earnings per share

$ 3.75   $ 3.44   $ 2.47  

Diluted earnings per share

$ 3.65   $ 3.36   $ 2.42  

Stock options to purchase 0.6 million, 0.4 million and 0.6 million shares were not included in the 2014, 2013 and 2012 computations of diluted earnings per share, respectively, because they would have been anti-dilutive.

J. Retirement Benefits

The Company has a defined contribution plan, under Section 401(k) of the Internal Revenue Code, which provides retirement benefits to most U.S. employees. For all employees who choose to participate, the Company matches employee contributions at a 100 percent rate, up to 3 percent of the employee’s compensation. For employees not covered by a defined benefit plan, the Company contributes an amount equal to 1.5 percent of the employee’s compensation. Employer contributions totaled $6.9 million in 2014, $6.3 million in 2013 and $5.6 million in 2012.

The Company’s postretirement medical plan provides certain medical benefits for retired U.S. employees. Employees hired before January 1, 2005, are eligible for these benefits upon retirement and fulfillment of other eligibility requirements as specified by the plan.

The Company has both funded and unfunded noncontributory defined benefit pension plans that together cover most U.S. employees hired before January 1, 2006, certain directors and some of the employees of the Company’s non-U.S. subsidiaries. For U.S. plans,

 

48


Table of Contents

benefits are based on years of service and the highest five consecutive years’ earnings in the ten years preceding retirement. The Company funds annually in amounts consistent with minimum funding levels and maximum tax deduction limits.

The Company maintains a defined contribution plan covering employees of a Swiss subsidiary, funded by Company and employee contributions. In 2013, the Company transferred responsibility for pension coverage under Swiss law to a reputable Swiss insurance company. To effect the change, plan assets were converted to cash and deposited with the insurance company for investment under an insurance contract that guarantees a federally mandated annual rate of return. The value of the plan assets is effectively the value of the insurance contract. The performance of the underlying assets held by the insurance company has no direct impact on the surrender value of the insurance contract. The insurance backed assets have no active market and are classified in the “other” assets category, level 3 in the fair value hierarchy. The transfer of responsibility for current retirees to the new plan carrier was treated as a settlement under ASC 715 and resulted in a reduction of plan obligations and assets, and a small settlement gain in 2013.

Investment policies and strategies of the U.S. funded pension plan are based on a long-term view of economic growth and heavily weighted toward equity securities. The primary goal of the plan’s investments is to ensure that the plan’s liabilities are met over time. In developing strategic asset allocation guidelines, an emphasis is placed on the long-term characteristics of individual asset classes, and the benefits of diversification among multiple asset classes. The plan invests primarily in domestic and international equities, fixed income securities, which include treasuries, highly-rated corporate bonds and high-yield bonds and real estate. The midpoints of the ranges of strategic target allocations for plan assets are 58 percent equity securities, 31 percent fixed income securities and 11 percent real estate and alternative investments.

Plan assets are held in a trust for the benefit of plan participants and are invested in various commingled funds, most of which are sponsored by the trustee. Equity securities are valued using quoted prices in active markets. The fair values for commingled equity and fixed-income funds, international equity funds, and real estate investments are measured using net asset values, which take into consideration the value of underlying fund investments, as well as the other accrued assets and liabilities of a fund, in order to determine a per share market value. Commingled fund and international equity funds are classified as level 2 because the net asset value is not directly traded on an active exchange. Certain trustee-sponsored funds allow redemptions monthly or quarterly, with 10 or 60 days advance notice, while most of the funds allow redemptions daily.

Level 3 assets in the U.S. funded pension plan consist primarily of investments in real estate investment trust funds whose assets are valued at least annually by independent appraisal firms, using market, income and cost approaches. Significant unobservable quantitative inputs used in determining the fair value of each investment include cash flow assumptions, capitalization rates and discount rates. These inputs are subject to change based on changes in economic and market conditions and/or changes in use or timing of exit. Changes in cash flows, discount rates and terminal capitalization rates will result in increases or decreases in the fair values of these investments. It is not possible for us to predict the effect of future economic or market conditions on the estimated fair values of plan assets.

 

49


Table of Contents

Plan assets by category and fair value measurement level were as follows (in thousands):

 

  Total   Level 1   Level 2   Level 3  

December 26, 2014

               

Equity

U.S. Large Cap

$ 92,272   $ -     $ 92,272   $ -    

U.S. Small/Mid Cap

  14,948     -       14,948     -    

International

  45,958     -       45,958     -    
  

 

 

    

 

 

    

 

 

    

 

 

 

Total Equity

  153,178     -       153,178     -    

Fixed income

  53,548     -       40,693     12,855  

Insurance contract

  28,899     -       -       28,899  

Real estate and other

  41,583     1,356     15,008     25,219  
  

 

 

    

 

 

    

 

 

    

 

 

 

Total

$ 277,208   $ 1,356   $ 208,879   $ 66,973  
  

 

 

    

 

 

    

 

 

    

 

 

 

December 27, 2013

               

Equity

U.S. Large Cap

$ 95,025   $ -     $ 95,025   $ -    

U.S. Small/Mid Cap

  18,020     -       18,020     -    

International

  69,140     -       69,140     -    
  

 

 

    

 

 

    

 

 

    

 

 

 

Total Equity

  182,185     -       182,185     -    

Fixed income

  48,718     -       40,158     8,560  

Real estate and other

  49,704     1,149     31,271     17,284  
  

 

 

    

 

 

    

 

 

    

 

 

 

Total

$   280,607   $   1,149   $   253,614   $   25,844  
  

 

 

    

 

 

    

 

 

    

 

 

 

A reconciliation of the beginning and ending balances of level 3 plan assets follows:

 

  2014   2013  

Balance, beginning of year

$ 25,844   $ 15,138  

Transfer from level 2 (insurance contract)

  31,271     -    

Purchases

  12,914     14,277  

Redemptions

  (3,849   (5,351

Change in unrealized gains (losses)

  793     1,780  
  

 

 

    

 

 

 

Balance, end of year

$ 66,973   $ 25,844  
  

 

 

    

 

 

 

 

50


Table of Contents

The Company uses a fiscal year-end measurement date for all of its plans. The following provides a reconciliation of the changes in the plans’ benefit obligations and fair value of assets over the periods ending December 26, 2014, and December 27, 2013, and a statement of the funded status as of the same dates (in thousands):

 

  Pension Benefits   Postretirement Medical Benefits  
  2014   2013   2014   2013  

Change in benefit obligation

Obligation, beginning of year

$ 352,271   $ 359,701   $ 21,342   $ 23,472  

Service cost

  6,846     7,447     486     626  

Interest cost

  15,944     14,149     981     961  

Actuarial loss (gain)

  44,290     (15,653   1,037     (2,582

Plan changes

  -       3,197     -       -    

Benefit payments

  (23,593   (10,762   (1,082   (1,135

Settlements

  -       (7,430   -       -    

Exchange rate changes

  (6,066   1,622     -       -    
  

 

 

    

 

 

    

 

 

    

 

 

 

Obligation, end of year

$ 389,692   $ 352,271   $ 22,764   $ 21,342  
  

 

 

    

 

 

    

 

 

    

 

 

 

Change in plan assets

Fair value, beginning of year

$ 280,607   $ 246,606   $ -     $ -    

Actual return on assets

  21,622     40,280     -       -    

Employer contributions

  1,814     10,728     1,082     1,135  

Benefit payments

  (23,593   (10,762   (1,082   (1,135

Settlements

  -       (7,241   -       -    

Exchange rate changes

  (3,242   996     -       -    
  

 

 

    

 

 

    

 

 

    

 

 

 

Fair value, end of year

$ 277,208   $ 280,607   $ -     $ -    
  

 

 

    

 

 

    

 

 

    

 

 

 

Funded status

$ (112,484 $ (71,664 $ (22,764 $ (21,342
  

 

 

    

 

 

    

 

 

    

 

 

 

Amounts recognized in consolidated balance sheets

Current liabilities

$ 1,308   $ 1,116   $ 1,165   $ 1,256  

Non-current liabilities

  111,176     70,548     21,599     20,086  
  

 

 

    

 

 

    

 

 

    

 

 

 

Total liabilities

$ 112,484   $ 71,664   $ 22,764   $ 21,342  
  

 

 

    

 

 

    

 

 

    

 

 

 

The accumulated benefit obligation as of year-end for all defined benefit pension plans was $361 million for 2014 and $326 million for 2013. Information for plans with an accumulated benefit obligation in excess of plan assets follows (in thousands):

 

  2014   2013  

Projected benefit obligation

$   389,692   $   352,271  

Accumulated benefit obligation

  360,945     326,030  

Fair value of plan assets

  277,208     280,607  

The components of net periodic benefit cost for the plans for 2014, 2013 and 2012 were as follows (in thousands):

 

  Pension Benefits   Postretirement Medical Benefits  
  2014   2013   2012   2014   2013   2012  

Service cost-benefits earned during the period

$ 6,846   $ 7,447   $ 6,414   $ 486   $ 626   $ 589  

Interest cost on projected benefit obligation

  15,944     14,149     13,729     981     961     986  

Expected return on assets

  (21,253   (18,508   (15,907   -       -       -    

Amortization of prior service cost (credit)

  320     8     (5   (658   (658   (658

Amortization of net loss (gain)

  4,929     10,456     10,814     15     480     395  

Cost of pension plans which are not significant and have not adopted ASC 715

  80     94     121     N/A      N/A      N/A   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Net periodic benefit cost

$ 6,866   $ 13,646   $ 15,166   $ 824   $ 1,409   $ 1,312  
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

 

51


Table of Contents

Amounts recognized in other comprehensive (income) loss in 2014 and 2013 were as follows (in thousands):

 

  Pension Benefits   Postretirement Medical Benefits  
  2014   2013   2014   2013  

Net loss (gain) arising during the period

$ 42,733   $ (37,284 $ 1,037   $ (2,582

Prior service cost (credit) arising during the period

  -     3,197     -     -   

Amortization of net gain (loss)

  (4,929   (10,456   (15   (480

Amortization of prior service credit (cost)

  (320   (8   658     658  
  

 

 

   

 

 

   

 

 

   

 

 

 

Total

$ 37,484   $ (44,551 $ 1,680   $ (2,404
  

 

 

   

 

 

   

 

 

   

 

 

 

Amounts included in accumulated other comprehensive (income) loss as of December 26, 2014 and December 27, 2013, that had not yet been recognized as components of net periodic benefit cost, were as follows (in thousands):

 

  Pension Benefits   Postretirement Medical Benefits  
  2014   2013   2014   2013  

Prior service cost (credit)

$ 2,658   $ 3,271   $ (1,786 $ (2,444

Net loss

  111,298     73,200     4,347     3,325  
  

 

 

   

 

 

   

 

 

   

 

 

 

Net before income taxes

  113,956     76,471     2,561     881  

Income taxes

  (39,011   (26,903   (922   (317
  

 

 

   

 

 

   

 

 

   

 

 

 

Net

$ 74,945   $ 49,568   $ 1,639   $ 564  
  

 

 

   

 

 

   

 

 

   

 

 

 

Amounts included in accumulated other comprehensive (income) loss that are expected to be recognized as components of net periodic benefit cost in 2015 were as follows (in thousands):

 

  Pension
Benefits
  Postretirement
Medical
Benefits
 

Prior service cost (credit)

$ 295   $ (676

Net loss (gain)

  8,922     271  
  

 

 

    

 

 

 

Net before income taxes

  9,217     (405

Income taxes

  (3,318   146  
  

 

 

    

 

 

 

Net

$ 5,899   $ (259
  

 

 

    

 

 

 

Assumptions used to determine the Company’s benefit obligations are shown below:

 

  Pension Benefits   Postretirement Medical Benefits  

Weighted average assumptions

    2014           2013           2014       2013  

U.S. Plans

Discount rate

  4.2   5.0   4.2   5.0 

Rate of compensation increase

  3.0   3.0   N/A      N/A   

Non-U.S. Plans

Discount rate

  1.5   2.5   N/A      N/A   

Rate of compensation increase

  1.3   1.3   N/A      N/A   

 

52


Table of Contents

Assumptions used to determine the Company’s net periodic benefit cost are shown below:

 

  Pension Benefits   Postretirement Medical Benefits  

Weighted average assumptions            

    2014           2013           2012           2014           2013           2012      

U.S. Plans

Discount rate

  5.0    4.2    4.6    5.0    4.2    4.6 

Rate of compensation increase

  3.0    3.0    3.0    N/A      N/A      N/A   

Expected return on assets

  8.5    8.5    8.5    N/A      N/A      N/A   

Non-U.S. Plans

Discount rate

  2.5    2.3    2.9    N/A      N/A      N/A   

Rate of compensation increase

  1.3    1.2    1.2    N/A      N/A      N/A   

Expected return on assets

  2.0    3.0    3.0  %   N/A      N/A      N/A   

Several sources of information are considered in determining the expected rate of return assumption, including the allocation of plan assets, the input of actuaries and professional investment advisors, and historical long-term returns. In setting the return assumption, the Company recognizes that historical returns are not always indicative of future returns and also considers the long-term nature of its pension obligations.

The Company’s U.S. retirement medical plan limits the annual cost increase that will be paid by the Company to 3 percent. In measuring the accumulated postretirement benefit obligation (APBO), the annual trend rate for health care costs was assumed to be 7.0 percent for 2015, decreasing each year to a constant rate of 4.5 percent for 2026 and thereafter, subject to the plan’s annual increase limitation.

At December 26, 2014, a one percent change in assumed health care cost trend rates would not have a significant impact on the service and interest cost components of net periodic postretirement health care benefit cost or the APBO for health care benefits.

The Company expects to contribute $2.3 million to its unfunded pension plans and $1.2 million to the postretirement medical plan in 2015. The Company will not be required to make contributions to the funded pension plan under minimum funding requirements for 2015. Estimated future benefit payments are as follows (in thousands):

 

  Pension
Benefits
  Postretirement
Medical
Benefits
 

2015

$ 15,290   $ 1,165  

2016

  17,085     1,259  

2017

  16,299     1,310  

2018

  17,417     1,373  

2019

  18,248     1,440  

Years 2020 - 2024

  105,418     7,873  

 

53


Table of Contents

K. Commitments and Contingencies

Lease Commitments. Aggregate annual rental commitments under operating leases with noncancelable terms of more than one year were as follows at December 26, 2014 (in thousands):

 

  Buildings   Vehicles &
Equipment
  Total  

2015

$ 3,472   $ 2,896   $ 6,368  

2016

  2,556     2,086     4,642  

2017

  2,307     1,481     3,788  

2018

  1,983     882     2,865  

2019

  2,023     607     2,630  

Thereafter

  7,942     442     8,384  
  

 

 

    

 

 

    

 

 

 

Total

$ 20,283   $ 8,394   $ 28,677  
  

 

 

    

 

 

    

 

 

 

Total rental expense was $5.0 million for 2014, $3.6 million for 2013 and $3.3 million for 2012.

Other Commitments. The Company is committed to pay suppliers under the terms of open purchase orders issued in the normal course of business totaling approximately $76 million at December 26, 2014. The Company also has commitments with certain suppliers to purchase minimum quantities, and under the terms of certain agreements, the Company is committed for certain portions of the supplier’s inventory. The Company does not purchase, or commit to purchase, quantities in excess of normal usage or amounts that cannot be used within one year. The Company estimates that the maximum commitment amount under such agreements does not exceed $36 million. In addition, the Company could be obligated to perform under standby letters of credit totaling $2 million at December 26, 2014. The Company has also guaranteed the debt of its subsidiaries for up to $9 million. All debt of subsidiaries is reflected in the consolidated balance sheets.

Contingencies. The Company is party to various legal proceedings arising in the normal course of business. The Company is actively pursuing and defending these matters and has recorded an estimate of the probable costs. Management does not expect that resolution of these matters will have a material adverse effect on the Company, although the ultimate outcome cannot be determined based on available information.

As more fully described in Note L, under terms of orders issued by the FTC, the Company is required to separately maintain the Liquid Finishing businesses as viable and competitive while it seeks a buyer for those businesses. The Company’s maximum exposure to loss as a result of its involvement with the Liquid Finishing businesses would include the entirety of its investment of $422 million and reimbursement of losses of the operations of the Liquid Finishing businesses in accordance with the hold separate order, which cannot be quantified. The operating earnings of the Liquid Finishing businesses exceed $160 million (unaudited) since the date of acquisition, and no additional financial resources were required to be funded by the Company.

L. Acquisitions and Divestitures

On October 1, 2014, the Company acquired the stock of Alco Valves Group for £72 million cash, subject to normal post-closing purchase price adjustments. Alco is a United Kingdom based manufacturer of high quality, high pressure valves used in the oil and natural gas industry and in other industrial processes. Alco’s products and business relationships will enhance Graco’s position in the oil and natural gas industry and complement Graco’s core competencies of designing and manufacturing advanced flow control technologies. Alco revenues for the twelve months preceding the acquisition were approximately £19 million. Results of Alco operations, including $6 million of sales, have been included in the Company’s Industrial segment starting from the date of acquisition.

 

54


Table of Contents

Purchase consideration was allocated to assets acquired and liabilities assumed based on estimated fair values as follows (in thousands):

 

            
 

Cash and cash equivalents

   $ 1,929  
 

Accounts receivable

     9,821  
 

Inventories

     9,565  
 

Other current assets

     343  
 

Property, plant and equipment

     1,047  
 

Other non-current assets

     225  
 

Identifiable intangible assets

     30,348  
 

Goodwill

     73,445  
    

 

 

 

Total assets acquired

  126,723  

Current liabilities assumed

  (3,291)   

Deferred income taxes

  (6,266)   
    

 

 

 

Net assets acquired

$ 117,166  
    

 

 

 

None of the goodwill acquired with Alco is deductible for tax purposes.

Identifiable intangible assets and estimated useful life are as follows (dollars in thousands):

 

                  
            Estimated
Life (years)
  

Customer relationships

   $ 22,883      10   

Trade names

     7,465      Indefinite   
  

 

 

       

Total identifiable intangible assets

$ 30,348  
  

 

 

       

In the first quarter of 2014, the Company paid $65 million cash to acquire a manufacturer of fluid management solutions for environmental monitoring and remediation, markets where Graco had little or no previous exposure. The acquired business expands and complements the Company’s Industrial segment. The purchase price was allocated based on estimated fair values, including $37 million of goodwill, $22 million of other identifiable intangible assets and $6 million of net tangible assets.

In April 2012, the Company completed the purchase of the finishing businesses of Illinois Tool Works Inc. The acquisition included finishing equipment operations, technologies and brands of the Powder Finishing and Liquid Finishing businesses. Results of the Powder Finishing businesses have been included in the Industrial segment since the date of acquisition. Pursuant to a March 2012 order, the Liquid Finishing businesses were to be held separate from the rest of Graco’s businesses while the FTC considered a settlement with Graco and determined which portions of the Liquid Finishing business Graco must divest.

The Company transferred cash purchase consideration of $660 million to the seller on April 2, 2012. In July 2012, the Company transferred additional cash purchase consideration of $8 million, representing the difference between cash balances acquired and the amount estimated at the time of closing. In 2013, the seller reimbursed Graco approximately $5 million for payments of pre-acquisition tax liabilities paid by Liquid Finishing businesses after the acquisition date. This reimbursement was recorded as a reduction of the cost-method investment.

 

55


Table of Contents

Purchase consideration was allocated to assets acquired and liabilities assumed based on estimated fair values as follows (in thousands):

 

            
 

Cash and cash equivalents

   $ 6,007  
 

Accounts receivable

     17,835  
 

Inventories

     21,733  
 

Other current assets

     2,534  
 

Property, plant and equipment

     18,359  
 

Other non-current assets

     50  
 

Identifiable intangible assets

     150,500  
 

Goodwill

     86,056  
    

 

 

 

Total assets acquired

  303,074  

Current liabilities assumed

  (27,434

Non-current liabilities assumed

  (7,984

Deferred income taxes

  (26,105
    

 

 

 

Net assets acquired, Powder Finishing

  241,551  

Investment in businesses held separate

  426,813  
    

 

 

 

Total purchase consideration

$   668,364  
    

 

 

 

Identifiable intangible assets and estimated useful life are as follows (dollars in thousands):

 

                  
            Estimated
     Life (years)     
  

Customer relationships

   $ 103,500      14   

Developed technology

     9,600      11   

Trade names

     37,400      Indefinite   
  

 

 

       

Total identifiable intangible assets

$   150,500  
  

 

 

       

The Company adjusted the preliminary purchase price allocation in the fourth quarter of 2012 to recognize deferred tax liability on certain identifiable intangible assets, which resulted in an $8 million increase in goodwill. Substantially none of the goodwill acquired in 2012 is deductible for tax purposes.

In the fourth quarter of 2014, the FTC approved a final decision and order that became effective on October 9, 2014. Pursuant to the final order, Graco must sell the Liquid Finishing business assets within 180 days of the effective date. On October 8, 2014, the Company announced it had signed a definitive agreement to sell the Liquid Finishing business assets for $590 million cash, subject to regulatory approval and other customary closing conditions. The sale transaction is expected to close in the first half of 2015, in compliance with the FTC’s final decision and order. Graco will continue to hold the Liquid Finishing businesses separate and maintain them as viable and competitive until the sale process is complete.

The Liquid Finishing business assets are held as a cost-method investment on the Consolidated Balance Sheets. Income is recognized based on dividends received from after-tax earnings of Liquid Finishing and included in other expense (income) on the Consolidated Statements of Earnings. Dividends received totaled $28 million in 2014, $28 million in 2013 and $12 million in 2012. Once the Company completes the sale of its investment, there will be no further dividends from Liquid Finishing.

The Company evaluates its cost-method investment for other-than-temporary impairment at each reporting period. As of December 26, 2014, the Company evaluated its investment in Liquid Finishing and determined that there is no impairment.

Sales and operating earnings of the Liquid Finishing businesses were as follows (unaudited, in thousands):

 

    2014   2013   2012  

Net Sales

$   288,231   $   278,543   $   269,099  

Operating Earnings

  62,605     61,174     52,256  

 

56


Table of Contents

The Company completed other business acquisitions in 2014, 2013 and 2012 that were not material to the consolidated financial statements.

Subsequent events: In January 2015, the Company completed the acquisition of High Pressure Equipment Holdings, LLC (HiP) for $160 million. HiP designs and manufactures valves, fittings and other flow control equipment engineered to perform in ultra-high pressure environments. The Company also acquired White Knight Fluid Handling, a manufacturer of high purity, metal free pumps used in the production process of manufacturing semiconductors, solar panels, LED flat panel displays and various other electronics, and Multimaq-Pistolas e Equipamentos Para Pintura Ltda., a manufacturer and distributor of finishing products in the Brazilian market.

M. Quarterly Financial Information (unaudited)

 

  First
Quarter
  Second
Quarter
  Third
Quarter
  Fourth
Quarter
 

2014

Net Sales

$ 289,962   $ 322,549   $ 302,614   $ 306,005  

Gross Profit

  159,312     176,850     165,814     164,760  

Net Earnings

  50,745     66,236     59,551     49,041  

Basic Net Earnings per Common Share

$ 0.83   $ 1.10   $ 0.99   $ 0.83  

Diluted Net Earnings per Common Share

  0.81     1.07     0.97     0.80  

Cash Dividends Declared per Common Share

  0.28     0.28     0.28     0.30  

2013

Net Sales

$ 269,046   $ 286,020   $ 277,035   $ 271,923  

Gross Profit

  150,644     158,739     150,873     147,199  

Net Earnings

  52,130     57,843     56,101     44,748  

Basic Net Earnings per Common Share

$ 0.86   $ 0.94   $ 0.91   $ 0.73  

Diluted Net Earnings per Common Share

  0.84     0.92     0.89     0.71  

Cash Dividends Declared per Common Share

  0.25     0.25     0.25     0.28  

 

57


Table of Contents

Item 9. Changes in and Disagreements With Accountants on Accounting and Financial Disclosure

None.

Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

As of the end of the fiscal year covered by this report, the Company carried out an evaluation of the effectiveness of the design and operation of its disclosure controls and procedures. This evaluation was done under the supervision and with the participation of the Company’s President and Chief Executive Officer, the Chief Financial Officer, the Vice President, Corporate Controller and Information Systems, and the Vice President, General Counsel and Secretary. Based upon that evaluation, they concluded that the Company’s disclosure controls and procedures are effective.

Management’s Annual Report on Internal Control Over Financial Reporting

The information under the heading “Management’s Report on Internal Control Over Financial Reporting” in Part II, Item 8, of this 2014 Annual Report on Form 10-K is incorporated herein by reference.

Reports of Independent Registered Public Accounting Firm

The information under the heading “Reports of Independent Registered Public Accounting Firm: Internal Control Over Financial Reporting” in Part II, Item 8, of this 2014 Annual Report on Form 10-K is incorporated herein by reference.

Changes in Internal Control Over Financial Reporting

During the fourth quarter, there was no change in the Company’s internal control over financial reporting that has materially affected or is reasonably likely to materially affect the Company’s internal control over financial reporting.

Item  9B. Other Information

Not applicable.

 

58


Table of Contents

PART III

Item 10. Directors, Executive Officers and Corporate Governance

The information under the heading “Executive Officers of Our Company” in Part I of this 2014 Annual Report on Form 10-K and the information under the heading “Board of Directors” in our Company’s Proxy Statement for its 2015 Annual Meeting of Shareholders to be held on April 24, 2015 (the “Proxy Statement”), is incorporated herein by reference.

Audit Committee Members and Audit Committee Financial Expert

The information under the heading “Committees of the Board of Directors” in our Company’s Proxy Statement is incorporated herein by reference.

Corporate Governance Guidelines, Committee Charters and Code of Ethics

Our Company has adopted Corporate Governance Guidelines and Charters for each of the Audit, Governance, and Management Organization and Compensation Committees of the Board of Directors. We have also issued a Code of Ethics and Business Conduct (“Code of Ethics”) that applies to our principal executive officer, principal financial officer, principal accounting officer, all officers, directors, and employees of Graco Inc. and all of its subsidiaries, representative offices and branches worldwide. The Corporate Governance Guidelines, Committee Charters, and Code of Ethics, with any amendments or waivers thereto, may be accessed free of charge by visiting the Graco website at www.graco.com.

Our Company intends to post on the Graco website any amendment to, or waiver from, a provision of the Code of Ethics that applies to our principal executive officer, principal financial officer, principal accounting officer, controller and other persons performing similar functions within four business days following the date of such amendment or waiver.

Section 16(a) Reporting Compliance

The information under the heading “Section 16(a) Beneficial Ownership Reporting Compliance” in the Company’s Proxy Statement is incorporated herein by reference.

Item 11. Executive Compensation

The information contained under the headings “Director Compensation,” “Executive Compensation,” “Compensation Committee Interlocks and Insider Participation” and “Report of the Management Organization and Compensation Committee” in the Proxy Statement is incorporated herein by reference.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information contained under the headings “Equity Compensation Plan Information” and “Beneficial Ownership of Shares” in the Proxy Statement is incorporated herein by reference.

Item 13. Certain Relationships and Related Transactions, and Director Independence

The information under the headings “Related Person Transaction Approval Policy” and “Director Independence” in the Proxy Statement is incorporated herein by reference.

Item 14. Principal Accounting Fees and Services

The information under the headings “Independent Registered Public Accounting Firm Fees and Services” and “Pre-Approval Policies” in the Proxy Statement is incorporated herein by reference.

 

59


Table of Contents

PART IV

Item 15. Exhibits, Financial Statement Schedule

 

(a) The following documents are filed as part of this report:

 

    (1)

Financial Statements

See Part II

(2) Financial Statement Schedule
Schedule II – Valuation and Qualifying Accounts   61   
All other schedules are omitted because they are not applicable, or are not required, or because the required information is included in the Consolidated Financial Statements or Notes thereto.
(3)

Management Contract, Compensatory Plan or Arrangement. (See Exhibit Index)

Those entries marked by an asterisk are Management Contracts, Compensatory Plans

or Arrangements.

 
63
  

 

60


Table of Contents

Schedule II - Valuation and Qualifying Accounts

Graco Inc. and Subsidiaries

(in thousands)

 

  Balance at
beginning
of year
  Additions
charged to
costs and
expenses
  Deductions
from
reserves
  Other
add
(deduct)
  Balance
at end
of year
 

Year ended

December 26, 2014

Allowance for doubtful accounts

$ 1,300   $ 800   $ 300   $ 600   $ 2,400  

Allowance for returns and credits

  5,000     22,400     21,700     -       5,700  
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 
$ 6,300   $ 23,200   $ 22,000   $ 600   $ 8,100  
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

December 27, 2013

Allowance for doubtful accounts

$ 2,100   $ 600   $ 1,400   $ -     $ 1,300  

Allowance for returns and credits

  4,500     17,300     16,800     -       5,000  
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 
$ 6,600   $ 17,900   $ 18,200   $ -     $ 6,300  
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

December 28, 2012

Allowance for doubtful accounts

$ 1,400   $ 500   $ 100   $ 300   $ 2,100  

Allowance for returns and credits

  4,100     13,700     13,300     -       4,500  
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 
$ 5,500   $ 14,200   $ 13,400   $ 300   $ 6,600  
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

 

1 For doubtful accounts, represents amounts determined to be uncollectible and charged against reserve, net of collections on accounts previously charged against reserves. For returns and credits, represents amounts of credits issued and returns processed.

 

2  Includes amounts assumed or established in connection with acquisitions and effects of foreign currency translation.

 

61


Table of Contents

Signatures

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

Graco Inc.

   /s/ PATRICK J. MCHALE

February 17, 2015
   Patrick J. McHale
   President and Chief Executive Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.

 

   /s/ PATRICK J. MCHALE

February 17, 2015
   Patrick J. McHale
   President and Chief Executive Officer
   (Principal Executive Officer)

   /s/ JAMES A. GRANER

February 17, 2015
   James A. Graner
   Chief Financial Officer
   (Principal Financial Officer)

   /s/ CAROLINE M. CHAMBERS

February 17, 2015
   Caroline M. Chambers
   Vice President, Corporate Controller and    Information Systems
   (Principal Accounting Officer)

 

Lee R. Mitau Director, Chairman of the Board
William J. Carroll Director
Jack W. Eugster Director
Eric P. Etchart Director
J. Kevin Gilligan Director
Patrick J. McHale Director
Martha A. Morfitt Director
R. William Van Sant Director

Patrick J. McHale, by signing his name hereto, does hereby sign this document on behalf of himself and each of the above named directors of the Registrant pursuant to powers of attorney duly executed by such persons.

 

   /s/ PATRICK J. MCHALE

February 17, 2015
   Patrick J. McHale
   (For himself and as attorney-in-fact)

 

62


Table of Contents

Exhibit Index

 

Exhibit
Number

Description

2.1

Asset Purchase Agreement, dated April 14, 2011, by and among Graco Inc., Graco Holdings Inc., Graco Minnesota Inc., Illinois Tool Works Inc. and ITW Finishing LLC (excluding schedules and exhibits, which the Company agrees to furnish supplementally to the Securities and Exchange Commission upon request). (Incorporated by reference to Exhibit 2.1 to the Company’s Report on Form 8-K filed April 15, 2011.) First Amendment dated April 2, 2012. (Incorporated by reference to Exhibit 2.1 to the Company’s Report on Form 8-K filed April 2, 2012.)

2.2

Asset Purchase Agreement, dated October 7, 2014, by and among Carlisle Companies Incorporated, Carlisle Fluid Technologies, Inc., Graco Inc. and Finishing Brands Holdings Inc. (excluding schedules and exhibits, which the Company agrees to furnish supplementally to the Securities and Exchange Commission upon request). (Incorporated by reference to Exhibit 2.1 to the Company’s Report on Form 8-K filed October 9, 2014.)
**2.3 Agreement relating to the sale and purchase of the entire issued share capital of Xamol Limited to acquire Alco Valves Group, dated as of October 1, 2014 (excluding certain schedules and exhibits, which the Company agrees to furnish supplementally to the Securities and Exchange Commission upon request). (Incorporated by reference to Exhibit 2.1 to the Company’s Report on Form 10-Q for the thirteen weeks ended September 26, 2014.)

2.4

Purchase and Sale Agreement, dated as of December 31, 2014, by and among High Pressure Equipment Holdings LLC, Wasserstein Partners III, LP, Wasserstein Partners III (Offshore), L.P., Wasserstein Partners III (Offshore), LTD, Audax Mezzanine Fund III, L.P., Audax Co-Invest III, L.P., Audax Trust Co-Invest, L.P., certain other Sellers, Wasserstein Partners III (GP), LP, Graco Fluid Handling (C) Inc. and Graco Inc. (excluding certain schedules and exhibits, which the Company agrees to furnish supplementally to the Securities and Exchange Commission upon request). (Incorporated by reference to Exhibit 2.1 to the Company’s Report on Form 8-K filed January 6, 2015.)

3.1

Restated Articles of Incorporation as amended June 13, 2014. (Incorporated by reference to Exhibit 3.1 to the Company’s Report on Form 8-K filed June 16, 2014.)

3.2

Restated Bylaws as amended February 14, 2014. (Incorporated by reference to Exhibit 3.2 to the Company’s 2013 Annual Report on Form 10-K.)

*10.1

Graco Inc. Incentive Bonus Plan. (Incorporated by reference to Appendix A to the Company’s Definitive Proxy Statement on Schedule 14A filed March 7, 2012.)

*10.2

Employee Stock Incentive Plan, as adopted by the Board of Directors on February 19, 1999. (Incorporated by reference to Exhibit 10.23 to the Company’s 2002 Annual Report on Form 10-K.) Amended and restated June 18, 2004. (Incorporated by reference to Exhibit 10.3 to the Company’s Report on Form 10-Q for the thirteen weeks ended April 1, 2005.)

*10.3

Graco Inc. Stock Incentive Plan. (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 10-Q for the thirteen weeks ended June 29, 2001.) Amended and restated June 18, 2004. (Incorporated by reference to Exhibit 10.2 to the Company’s Report on Form 10-Q for the thirteen weeks ended April 1, 2005.)

*10.4

Graco Inc. Amended and Restated Stock Incentive Plan (2006). (Incorporated by reference to Appendix A to the Company’s Definitive Proxy Statement on Schedule 14A filed March 14, 2006.)

*10.5

Graco Inc. 2010 Stock Incentive Plan. (Incorporated by reference to Appendix A to the Company’s Definitive Proxy Statement on Schedule 14A filed March 11, 2010.)

*10.6

Deferred Compensation Plan Restated, effective December 1, 1992. (Incorporated by reference to Exhibit 2 to the Company’s Report on Form 8-K dated March 11, 1993.) First Amendment dated September 1, 1996. (Incorporated by reference to Exhibit 10.2 to the Company’s Report on Form 10-Q for the thirteen weeks ended June 27, 1997.) Second Amendment dated May 27, 2000. (Incorporated by reference to Exhibit 10.7 to the Company’s 2005 Annual Report on Form 10-K.) Third Amendment adopted on December 19, 2002. (Incorporated by reference to Exhibit 10.7 to the Company’s 2005 Annual Report on Form 10-K.) Fourth Amendment adopted June 14, 2007. (Incorporated by reference to Exhibit 10.2 to the Company’s Report on Form 10-Q for the thirteen weeks ended June 29, 2007.)

*10.7

Deferred Compensation Plan (2005 Statement) as amended and restated on April 4, 2005. (Incorporated by reference to Exhibit 10.1 of the Company’s Report on Form 10-Q for the thirteen weeks ended July 1, 2005.) Second Amendment

 

63


Table of Contents
dated November 1, 2005. (Incorporated by reference to Exhibit 10.8 to the Company’s 2005 Annual Report on Form 10-K.) Third Amendment adopted on December 29, 2008. (Incorporated by reference to Exhibit 10.8 to the Company’s 2008 Annual Report on Form 10-K.) Second Amendment dated October 25, 2012. (Incorporated by reference to Exhibit 10.9 to the Company’s 2012 Annual Report on Form 10-K.)
  *10.8    Graco Restoration Plan (2005 Statement). (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 10-Q for the thirteen weeks ended September 29, 2006.) First Amendment adopted December 8, 2006. (Incorporated by reference to Exhibit 10.12 to the Company’s 2006 Annual Report on Form 10-K.) Second Amendment adopted August 15, 2007. (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 10-Q for the thirteen weeks ended September 28, 2007.) Third Amendment adopted March 27, 2008. (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 10-Q for the thirteen weeks ended March 28, 2008.) Fourth Amendment adopted December 29, 2008. (Incorporated by reference to Exhibit 10.11 to the Company’s 2008 Annual Report on Form 10-K.) Fifth Amendment adopted September 16, 2010. (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 10-Q for the thirteen weeks ended September 24, 2010.)
  *10.9    Graco Inc. Retirement Plan for Nonemployee Directors. (Incorporated by reference to Attachment C to Item 5 to the Company’s Report on Form 10-Q for the thirteen weeks ended March 29, 1991.) First Amendment adopted on December 29, 2008. (Incorporated by reference to Exhibit 10.10 to the Company’s 2008 Annual Report on Form 10-K.)
  *10.10    Form of Amendment to Executive Officer and Non-Employee Director Stock Options to Permit Net Exercises, as adopted by the Board of Directors February 17, 2012. (Incorporated by reference to Exhibit 10.1 of the Company’s Report on Form 10-Q for the thirteen weeks ended March 30, 2012.)
  *10.11    Stock Option Agreement. Form of agreement for award of nonstatutory stock options to nonemployee directors under the Graco Inc. Stock Incentive Plan in 2005 and 2006. (Incorporated by reference to Exhibit 10.3 to the Company’s Report on Form 10-Q for the thirteen weeks ended March 26, 2004.)
  *10.12    Stock Option Agreement. Form of agreement used for award of nonstatutory stock options to nonemployee directors under the Graco Inc. Amended and Restated Stock Incentive Plan (2006). (Incorporated by reference to Exhibit 10.3 to the Company’s Report on Form 10-Q for the thirteen weeks ended June 29, 2007.) Amended form of agreement for awards made to nonemployee directors in 2008. (Incorporated by reference to Exhibit 10.2 to the Company’s Report on Form 10-Q for the thirteen weeks ended June 27, 2008.) Amended and restated form of agreement for awards made to nonemployee directors in 2009. (Incorporated by reference to Exhibit 10.14 to the Company’s 2009 Annual Report on Form 10-K/A.)
  *10.13    Stock Option Agreement. Form of agreement used for award of nonstatutory stock options to nonemployee directors under the Graco Inc. 2010 Stock Incentive Plan in 2011. (Incorporated by reference to Exhibit 10.16 to the Company’s 2010 Annual Report on Form 10-K.) Amended form of agreement for awards made to nonemployee directors commencing in 2012. (Incorporated by reference to Exhibit 10.4 of the Company’s Report on Form 10-Q for the thirteen weeks ended March 30, 2012.)
  *10.14    Stock Option Agreement. Form of agreement for award of non-incentive stock options to executive officers under the Graco Inc. Stock Incentive Plan in 2005 and 2006. (Incorporated by reference to Exhibit 10.2 to the Company’s Report on Form 10-Q for the thirteen weeks ended March 26, 2004.)
  *10.15    Stock Option Agreement. Form of agreement used for award of non-incentive stock options to executive officers under the Graco Inc. Amended and Restated Stock Incentive Plan (2006) in 2007. (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 10-Q for the thirteen weeks ended March 30, 2007.) Amended form of agreement for awards made to executive officers in 2008, 2009 and 2010. (Incorporated by reference to Exhibit 10.2 to the Company’s Report on Form 10-Q for the thirteen weeks ended March 28, 2008.)
  *10.16    Stock Option Agreement. Form of agreement used for award of non-incentive stock options to Chief Executive Officer under the Graco Inc. Amended and Restated Stock Incentive Plan (2006) in 2007. (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 10-Q for the thirteen weeks ended March 30, 2007.) Amended form of agreement for awards made to Chief Executive Officer in 2008, 2009 and 2010. (Incorporated by reference to Exhibit 10.2 to the Company’s Report on Form 10-Q for the thirteen weeks ended March 28, 2008.)
  *10.17    Stock Option Agreement. Form of agreement used for award of non-incentive stock options to executive officers under the Graco Inc. 2010 Stock Incentive Plan in 2011. (Incorporated by reference to Exhibit 10.4 to the Company’s Report on Form 10-Q for the thirteen weeks ended April 1, 2011.) Amended form of agreement for awards made to executive officers commencing in 2012. (Incorporated by reference to Exhibit 10.3 of the Company’s Report on Form 10-Q for the thirteen weeks ended March 30, 2012.)

 

64


Table of Contents
  *10.18    Stock Option Agreement. Form of agreement used for award of non-incentive stock options to Chief Executive Officer under the Graco Inc. 2010 Stock Incentive Plan in 2011. (Incorporated by reference to Exhibit 10.3 to the Company’s Report on Form 10-Q for the thirteen weeks ended April 1, 2011.) Amended form of agreement for awards made to Chief Executive Officer commencing in 2012. (Incorporated by reference to Exhibit 10.2 of the Company’s Report on Form 10-Q for the thirteen weeks ended March 30, 2012.)
  *10.19    Nonemployee Director Stock and Deferred Stock Program. (Incorporated by reference to Exhibit 10.22 to the Company’s 2009 Annual Report on Form 10-K/A.)
  *10.20    Key Employee Agreement. Form of agreement used with Chief Executive Officer. (Incorporated by reference to Exhibit 10.24 to the Company’s 2007 Annual Report on Form 10-K.)
  *10.21    Key Employee Agreement. Form of agreement used with executive officers other than the Chief Executive Officer. (Incorporated by reference to Exhibit 10.25 to the Company’s 2007 Annual Report on Form 10-K.)
  *10.22    Executive Group Long-Term Disability Policy as revised in 1995. (Incorporated by reference to Exhibit 10.23 to the Company’s 2004 Annual Report on Form 10-K.) Enhanced by Supplemental Income Protection Plan in 2004. (Incorporated by reference to Exhibit 10.28 to the Company’s 2007 Annual Report on Form 10-K.)
  *10.23    Amendment to the 2003 through 2006 Nonstatutory Stock Option Agreements of one nonemployee director. (Incorporated by reference to Exhibit 10.27 to the Company’s 2009 Annual Report on Form 10-K/A.)
  10.24    Omnibus Amendment, dated June 26, 2014, amending and restating the Credit Agreement among Graco Inc., the borrowing subsidiaries from time to time party thereto, the banks from time to time party thereto and U.S. Bank National Association, as administrative agent. (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 8-K filed July 1, 2014.)
  10.25    Note Agreement, dated March 11, 2011, between Graco Inc. and the Purchasers listed on the Purchaser Schedule attached thereto, which includes as exhibits the form of Senior Notes. (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 8-K filed March 16, 2011.) Amendment No. 1 dated May 23, 2011. (Incorporated by reference to Exhibit 10.2 to the Company’s Report on Form 10-Q for the thirteen weeks ended July 1, 2011.) Amendment and Restatement No. 1 to Note Agreement dated as of March 27, 2012. (Incorporated by reference to Exhibit 10.2 to the Company’s Report on Form 8-K filed April 2, 2012.) Amendment No. 2 dated as of June 26, 2014 to Note Agreement dated as of March 11, 2011. (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 10-Q filed July 23, 2014.)
  10.26    Agreement between Graco Inc., Illinois Tool Works Inc., and ITW Finishing LLC, as the Respondents, and Counsel for the Federal Trade Commission. (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 8-K filed March 27, 2012.)
  10.27    Agreement Containing Consent Orders, by and between Graco Inc., Illinois Tool Works Inc., and ITW Finishing LLC, as the Respondents, and Counsel for the Federal Trade Commission. (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 8-K filed June 6, 2012.)
  10.28    Decision and Order by the U.S. Federal Trade Commission in the matter of Graco Inc., Illinois Tool Works Inc. and ITW Finishing LLC. (Incorporated by reference to Exhibit 10.1 to the Company’s Report on Form 8-K filed October 8, 2014.)
  11    Statement of Computation of Earnings per share included in Note I on page 48.
  21    Subsidiaries of the Company included herein on page 67.
  23    Independent Registered Public Accounting Firm’s Consent included herein on page 69.
  24    Power of Attorney included herein on page 70.
  31.1    Certification of President and Chief Executive Officer pursuant to Rule 13a-14(a) included herein on page 71.
  31.2    Certification of Chief Financial Officer pursuant to Rule 13a-14(a) included herein on page 72.

 

65


Table of Contents
  32    Certification of President and Chief Executive Officer and Chief Financial Officer pursuant to Section 1350 of Title 18, U.S.C. included herein on page 73.
      101    Interactive Data File.

Except as otherwise noted, all documents incorporated by reference above relate to File No. 001-09249.

* Management Contracts, Compensatory Plans or Arrangements.

** Certain portions of this exhibit have been omitted pursuant to a request for confidential treatment and have been filed separately with the Securities and Exchange Commission.

Pursuant to Item 601(b)(4)(iii) of Regulation S-K, copies of certain instruments defining the rights of holders of certain long-term debt of the Company and its subsidiaries are not filed as exhibits because the amount of debt authorized under any such instrument does not exceed 10 percent of the total assets of the Company and its subsidiaries. The Company agrees to furnish copies thereof to the Securities and Exchange Commission upon request.

 

66