Filed Pursuant to Rule 424(b)(2)

Registration Statement No. 333-159479

 

 

 

PROSPECTUS SUPPLEMENT
(To Prospectus Dated May 26, 2009)

 

 

$350,000,000

 

Allegheny Technologies Incorporated

 

4.25% Convertible Senior Notes due 2014

 

 

The notes will bear interest at the rate of 4.25% per year. Interest on the notes is payable semiannually in arrears on June 1 and December 1 each year, beginning on December 1, 2009. The notes will mature on June 1, 2014 unless earlier repurchased or converted.

 

Holders may convert their notes at their option at any time prior to the close of business on the second scheduled trading day immediately preceding the stated maturity date for the notes. The initial conversion rate for the notes will be 23.9263 shares of our common stock per $1,000 principal amount of notes, equivalent to an initial conversion price of approximately $41.795 per share of common stock. Such conversion rate will be subject to adjustment in certain events but will not be adjusted for accrued interest.

 

Following certain corporate transactions, we will increase the applicable conversion rate for a holder that elects to convert its notes in connection with such corporate transaction by a number of additional shares of our common stock as described in this prospectus supplement.

 

We may not redeem the notes prior to their stated maturity date. If we undergo a fundamental change, holders may require us to repurchase the notes in whole or in part for cash at a price equal to 100% of the principal amount of the notes to be purchased plus any accrued and unpaid interest to, but excluding, the repurchase date.

 

The notes will not be listed on any securities exchange. Our common stock is listed on the New York Stock Exchange under the symbol “ATI.” On May 27, 2009, the last reported sale price of our common stock on the New York Stock Exchange was $32.15 per share.

 

The notes will be our unsecured senior obligations and will rank equally with all of our other unsecured senior indebtedness.

 

Concurrent with the offering of notes pursuant to this prospectus supplement, we are also offering by a separate prospectus supplement $350 million aggregate principal amount of 9.375% Senior Notes due 2019. On May 26, 2009, we announced that we had commenced a cash tender offer to purchase any and all of our outstanding 8.375% Notes due 2011, of which $300 million in aggregate principal amount was outstanding as of March 31, 2009, at a purchase price of $1,060 per $1,000 principal amount of 8.375% notes plus accrued and unpaid interest.

 

 

Investing in the notes involves risks. See “Risk Factors” beginning on page S-9 of this prospectus supplement and page 2 of the accompanying prospectus.

 

Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this prospectus supplement or the related prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

 

 

 

 

 

Interest on the notes will accrue from June 2, 2009.

 

We have granted the underwriters an option to purchase from us within 30 days after the date of this prospectus supplement up to an additional $52,500,000 principal amount of notes, solely to cover over-allotments, if any.

 

 

 

 

We expect delivery of the notes will be made to investors in book-entry form through The Depository Trust Company for the accounts of its participants, including Clearstream Banking, societé anonyme, and Euroclear Bank, S.A./N.V., on or about June 2, 2009.

 

 

Joint Book-Running Managers

 

 

Joint Lead Manager

Merrill Lynch & Co.

 

 

 

Senior Co-Managers

 

 

 

Co-Managers

 

The date of this prospectus supplement is May 27, 2009

 

TABLE OF CONTENTS

 

Prospectus Supplement

 

 

You should rely only on the information contained in or incorporated by reference in this prospectus supplement and the accompanying prospectus. We have not authorized anyone to provide you with different information. We are not making an offer to sell these securities in any state where the offer is not permitted. You should not assume that the information contained in this prospectus supplement or the accompanying prospectus is accurate as of any date other than the dates on the front covers of these documents.

 

You should carefully review the information contained in or incorporated by reference into this prospectus supplement and the accompanying prospectus. In this prospectus supplement and the accompanying prospectus, statements that are not reported financial results or other historical information are “forward-looking statements.” Forward-looking statements give current expectations or forecasts of future events and are not guarantees of future performance. They are based on our management’s expectations that involve a number of business risks and uncertainties, any of which could cause actual results to differ materially from those expressed in or implied by the forward-looking statements.

 

You can identify these forward-looking statements by the fact that they do not relate strictly to historic or current facts. They use words such as “anticipates,” “believes,” “estimates,” “expects,” “would,” “should,” “will,” “will likely result,” “forecast,” “outlook,” “projects,” and similar expressions in connection with any discussion of future operating or financial performance.

 

We cannot guarantee that any forward-looking statements will be realized, although we believe that we have been prudent in our plans and assumptions. Achievement of future results is subject to risks, uncertainties and assumptions that may prove to be inaccurate. Among others, the factors discussed in the “Risk Factors” section of our Annual Report on Form 10-K for our fiscal year ended December 31, 2008 and any of our subsequently filed Quarterly Reports on Form 10-Q and “Risk Factors” could cause actual results to differ from those in forward-looking statements included in or incorporated by reference into this prospectus supplement and the accompanying prospectus or that we otherwise make. Important factors that could cause actual results to differ materially from those in the forward-looking statements include: (a) material adverse changes in economic or industry conditions generally, including credit market conditions and related issues, and global supply and demand conditions and prices for our specialty metals; (b) material adverse changes in the markets we serve, including the aerospace and defense, construction and mining, automotive, electrical energy, chemical process industry, oil and gas, medical and other markets; (c) our inability to achieve the level of cost savings, productivity improvements, synergies, growth or other benefits anticipated by management, including those anticipated from strategic investments and the integration of acquired businesses, whether due to significant increases in energy, raw materials or prices and availability of supply of the raw materials that are critical to the manufacture of our products; (e) declines in the value of our defined benefit pension plan assets or unfavorable changes in laws or regulations that govern pension plan funding; (f) significant legal proceedings or investigations adverse to us; (g) other risk factors summarized in our Annual Report on Form 10-K for the year ended December 31, 2008, and in other reports filed with the Securities and Exchange Commission (the “SEC”). Should known or unknown risks or uncertainties materialize, or should underlying assumptions prove to be inaccurate, actual results could vary materially from those anticipated, estimated or projected. You should bear this in mind as you consider any forward-looking statements.

 

We undertake no obligation to publicly update forward-looking statements, whether as a result of new information, future events or otherwise, except as may be required by law. You are advised, however, to consider any additional disclosures that we may make on related subjects in future filings with the SEC. You should understand that it is not possible to predict or identify all factors that could cause our actual results to differ. Consequently, you should not consider any list of factors to be a complete set of all potential risks or uncertainties.

 

Available Information

 

We file reports, proxy statements and other information with the SEC. These reports, proxy statements and other information that we file with the SEC can be read and copied at the SEC’s Public Reference Room at 100 F Street, N.E., Washington, D.C. 20549. Please call the SEC at 1-800-SEC-0330 to obtain further information on the operation of the Public Reference Room. The SEC maintains an internet site that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC, including us. The SEC’s internet address is http://www.sec.gov. In addition, our common stock is listed on the New York Stock Exchange, and our reports and other information can be inspected at the offices of the New York Stock Exchange, 20 Broad Street, New York, New York 10005. Our Internet website is www.alleghenytechnologies.com. Information contained on our website is not part of, and should not be construed as being incorporated by reference into, this prospectus supplement and the accompanying prospectus.

 

Incorporation by Reference

 

The SEC allows us to “incorporate by reference” information that we file with it. This means that we can disclose important information to you by referring you to other documents. Any information we incorporate in this manner is considered part of this prospectus supplement and the accompanying prospectus except to the extent updated and superseded by information contained in this prospectus supplement and the accompanying prospectus. Some information that we file with the SEC after the date of this prospectus supplement and until we sell all of the securities covered by this prospectus supplement will automatically update and supersede the information contained in this prospectus supplement and the accompanying prospectus.

 

We incorporate by reference the following documents that we have filed with the SEC and any filings that we make with the SEC in the future under Sections 13(a), 13(c), 14 or 15(d) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), until we sell all of the securities covered by this prospectus supplement, including between the date of this prospectus supplement and the date on which the offering of the securities under this prospectus supplement is terminated, except as noted in the paragraph below:

 

 

Pursuant to General Instruction B of Form 8-K, any information submitted under Item 2.02, Results of Operations and Financial Condition, or Item 7.01, Regulation FD Disclosure, of Form 8-K is not deemed to be “filed” for the purpose of Section 18 of the Exchange Act, and we are not subject to the liabilities of Section 18 with respect to information submitted under Item 2.02 or Item 7.01 of Form 8-K. We are not incorporating by reference any information submitted under Item 2.02 or Item 7.01 of Form 8-K into any filing under the Securities Act of 1933, as amended (the “Securities Act”) or the Exchange Act or into this prospectus supplement or the accompanying prospectus.

 

Statements contained in this prospectus supplement or the accompanying prospectus as to the contents of any contract, agreement or other document referred to in this prospectus supplement or the accompanying prospectus do not purport to be complete, and where reference is made to the particular provisions of that contract, agreement or other document, those references are qualified in all respects by reference to all of the provisions contained in that contract or other document. For a more complete understanding and description of each such contract, agreement or other document, we urge you to read the documents contained in the exhibits to the registration statement of which the accompanying prospectus is a part.

 

Any statement contained in a document incorporated by reference, or deemed to be incorporated by reference, into this prospectus supplement and the accompanying prospectus will be deemed to be modified or

superseded for purposes of this prospectus supplement and the accompanying prospectus to the extent that a statement contained herein, therein or in any other subsequently filed document which also is incorporated by reference in this prospectus supplement and the accompanying prospectus modifies or supersedes that statement. Any such statement so modified or superseded will not be deemed, except as so modified or superseded, to constitute a part of this prospectus supplement and the accompanying prospectus.

 

We will provide without charge, upon written or oral request, a copy of any or all of the documents that are incorporated by reference into this prospectus supplement and the accompanying prospectus and a copy of any or all other contracts, agreements or documents which are referred to in this prospectus supplement or the accompanying prospectus. Requests should be directed to: Allegheny Technologies Incorporated, 1000 Six PPG Place, Pittsburgh, PA 15222-5479, Attention: Corporate Secretary; telephone number: (412) 394-2800. You also may review a copy of the registration statement and its exhibits at the SEC’s Public Reference Room in Washington, D.C., as well as through the SEC’s internet site.

 

SUMMARY

Issuer		Allegheny Technologies Incorporated, a Delaware corporation.
Notes Offered		$350 million aggregate principal amount of 4.25% Convertible Senior Notes due 2014. We have also granted the underwriters an option to purchase within 30 days after the date of this prospectus supplement up to an additional $52.5 million aggregate principal amount of notes, solely to cover over-allotments, if any.
Maturity		June 1, 2014.
Interest Payment Dates		June 1 and December 1 of each year, beginning on December 1, 2009.
Ranking		The notes will be:
		• our unsecured senior obligations;
		• pari passu in right of payment with all of our existing and future senior debt; and
		• senior in right of payment to all of our existing and future subordinated obligations.
		After giving effect to this offering, the senior notes offering and the application of the proceeds therefrom as described under the caption “Use of Proceeds,” including to purchase our 8.375% notes pursuant to the tender offer (assuming all the outstanding 8.375% notes are purchased pursuant to the tender offer), as of March 31, 2009, we would have had an aggregate of approximately $882.8 million of indebtedness outstanding ($933.7 million if the underwriters exercise in full their option to purchase additional notes). If fewer than all the 8.375% notes are purchased in the tender offer, our indebtedness will be higher.
Optional Redemption		We may not redeem the notes prior to their stated maturity date.
Conversion Rights		Holders may convert their notes at their option at any time prior to the close of business on the second scheduled trading day immediately preceding the stated maturity date of the notes in equal multiples of $1,000 principal amount.
		The initial conversion rate for the notes will be 23.9263 shares of our common stock per $1,000 principal amount of notes, equivalent to an initial conversion price of approximately $41.795 per share of common stock. Such conversion rate will be subject to adjustment in certain events but will not be adjusted for accrued interest.
		In addition, following certain corporate transactions, we will increase the applicable conversion rate for a holder who elects to convert in connection with such corporate transactions by a number of additional shares of our common stock as described under “Description of Notes — Conversion Rights — Adjustment to Shares Delivered upon Conversion upon Certain Fundamental Changes.”

Fundamental Change		Under certain circumstances following a fundamental change, we will be required to make an offer to purchase all of the notes at a purchase price of 100% of their principal amount, plus accrued and unpaid interest, if any, to the date of repurchase.
Use of Proceeds		We intend to use the net proceeds of this offering to manage our liabilities and other obligations, such as by making contributions to our defined benefit pension trust and contributions to trusts established to fund retiree medical benefits, and the balance for general corporate purposes. See “Use of Proceeds.”
Trading Symbol for Our Common Stock		Our common stock is listed on the New York Stock Exchange under the symbol “ATI.”
Risk Factors		You should carefully consider the information set forth in the section entitled “Risk Factors” and the other information included or incorporated by reference into this prospectus supplement and the accompanying prospectus in deciding whether to purchase the notes.
Governing Law		State of New York.

														Three Months Ended
		Year Ended December 31,												March 31,
		2006				2007				2008				2008				2009
		(Dollars in millions)
														(Unaudited)
Statement of income data:
Sales:
High Performance Metals		$	1,806.6			$	2,067.6			$	1,944.9			$	481.0			$	387.9
Flat-Rolled Products			2,697.3				2,951.9				2,909.1				746.9				378.2
Engineered Products			432.7				433.0				455.7				115.5				65.5
Total sales			4,936.6				5,452.5				5,309.7				1,343.4				831.6
Operating profit (loss):
High Performance Metals			657.2				729.1				539.0				131.4				54.3
Flat-Rolled Products			356.1				512.0				385.0				102.9				7.7
Engineered Products			56.7				32.1				20.9				5.7				(6.1	)
Total operating profit			1,070.0				1,273.2				944.9				240.0				55.9
Income before income taxes and cumulative effect of change in accounting principle			880.7				1,154.1				867.7				221.6				0.3
Net income attributable to ATI			574.1				747.1				565.9				142.0				5.9
Balance sheet data (at end of period):
Working capital		$	1,344.8			$	1,544.7			$	1,235.5			$	1,486.9			$	1,200.3
Total assets			3,280.5				4,095.6				4,170.4				4,276.4				4,033.3
Long-term debt			529.9				507.3				494.6				503.5				488.8
Total debt			553.6				528.2				509.8				524.4				503.5
Cash and cash equivalents			502.3				623.3				469.9				468.0				506.0
Stockholders’ equity			1,540.4				2,279.2				2,029.0				2,346.3				2,022.3
Cash flow information:
Cash flow provided by operating activities		$	303.3			$	701.5			$	754.5			$	66.0			$	168.9
Cash flow used in investing activities			(235.8	)			(451.7	)			(513.9	)			(111.7	)			(109.2	)
Cash flow provided by (used in) financing activities			72.1				(128.8	)			(394.0	)			(109.6	)			(23.6	)
Other Data:
Ratio of earnings to fixed charges(1)			18.1	x			25.0	x			19.4	x			20.1	x			1.8	x
EBITDA(2)		$	966.9			$	1,257.0			$	986.5			$	248.9			$	32.6

(1)		For purposes of calculating the ratio of earnings to fixed charges, “earnings” represents income before income tax provision (benefit) and cumulative effect of change in accounting principle plus (income) loss recognized on less than fifty percent owned persons plus fixed charges less capitalized interest. “Fixed charges” consist of interest expense, the portion of rents deemed to be interest, capitalized interest and amortization of debt expense.
(2)		We define EBITDA as income (loss) before income taxes and cumulative effect of change in accounting principle plus depreciation and amortization. EBITDA is not a measure of financial performance under generally accepted accounting principles. EBITDA is not calculated in the same manner by all companies and, accordingly, is not necessarily comparable to similarly titled measures of other companies and may not be an appropriate measure of performance relative to other companies. We have presented EBITDA in this prospectus supplement solely as a supplemental disclosure because we believe it allows for a more complete analysis of our results of operations. We believe that EBITDA is useful to investors because EBITDA is commonly used to analyze companies on the basis of operating performance, leverage and liquidity. Furthermore, analogous measures are used by industry analysts to evaluate operating performance. EBITDA is not intended to be a measure of free cash flow for management’s discretionary use, as it does not consider certain cash requirements such as interest payments, tax payments and capital expenditures. EBITDA is not intended to represent, and should not be considered more meaningful than, or as an alternative to, a measure of operating performance as determined in accordance with generally accepted accounting principles. This definition of EBITDA will differ from the amounts calculated under the definition of EBITDA that will be contained in our amended revolving credit facilities. We do not intend to provide EBITDA information for future periods in earnings press releases, filings with the SEC or in response to inquiries. EBITDA is calculated as follows:

														Three Months Ended
		Year Ended December 31,												March 31,
		2006				2007				2008				2008				2009
		(Dollars in millions)
Income before income taxes and cumulative effect of change in accounting principle		$	880.7			$	1,154.1			$	867.7			$	221.6			$	0.3
Depreciation and amortization			86.2				102.9				118.8				27.3				32.3
EBITDA		$	966.9			$	1,257.0			$	986.5			$	248.9			$	32.6

 

An investment in the notes involves risks. You should carefully consider the risks described below and other information set forth in this prospectus supplement, the accompanying prospectus and the documents incorporated by reference, including “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and the related notes incorporated by reference in this prospectus supplement, before making an investment decision. The risks and uncertainties described below, in the accompanying prospectus and in the documents incorporated by reference are not the only risks we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also impair our business operations and financial performance. Should one or more of any of these risks materialize, our business, financial condition or results of operations could be materially adversely affected. This could cause a decline in the trading price of our securities, and you could lose all or part of your investment.

 

Risks Relating to Our Business

 

Cyclical Demand for Products.

 

The cyclical nature of the industries in which our customers operate causes demand for our products to be cyclical, creating potential uncertainty regarding future profitability. Various changes in general economic conditions may affect the industries in which our customers operate. These changes could include decreases in the rate of consumption or use of our customers’ products due to economic downturns. Other factors that may cause fluctuation in our customers’ positions are changes in market demand, lower overall pricing due to domestic and international overcapacity, currency fluctuations, lower priced imports and increases in use or decreases in prices of substitute materials. As a result of these factors, our profitability has been and may in the future be subject to significant fluctuation.

 

Worldwide economic conditions have recently deteriorated significantly and may remain depressed, or could worsen, in the foreseeable future. These conditions have had, and may continue to have, a material adverse effect on demand for our customers’ products and, in turn, on demand for our products. If these conditions persist or worsen, our results of operations and financial condition could be materially adversely affected.

 

Product Pricing.

 

From time-to-time, reduced demand, intense competition and excess manufacturing capacity have resulted in reduced prices, excluding raw material surcharges, for many of our products. These factors have had and may have an adverse impact on our revenues, operating results and financial condition.

 

Although inflationary trends in recent years have been moderate, during most of the same period certain critical raw material costs, such as nickel, titanium sponge, chromium, and molybdenum and scrap containing iron, nickel, titanium, chromium, and molybdenum have been volatile and at historically high levels. While we have been able to mitigate some of the adverse impact of rising raw material costs through raw material surcharges or indices to customers, rapid increases in raw material costs may adversely affect our results of operations.

 

We change prices on certain of our products from time-to-time. The ability to implement price increases is dependent on market conditions, economic factors, raw material costs and availability, competitive factors, operating costs and other factors, some of which are beyond our control. The benefits of any price increases may be delayed due to long manufacturing lead times and the terms of existing contracts.

 

Risks Associated with Commercial Aerospace.

 

A significant portion of the sales of our High Performance Metals segment represents products sold to customers in the commercial aerospace industry. The commercial aerospace industry has historically been cyclical due to factors both external and internal to the airline industry. These factors include general economic conditions, airline profitability, consumer demand for air travel, varying fuel and labor costs, price

competition, and international and domestic political conditions such as military conflict and the threat of terrorism. The length and degree of cyclical fluctuation are influenced by these factors and therefore are difficult to predict with certainty. Demand for our products in this segment is subject to these cyclical trends. For example, the average price per pound for our titanium mill products was $11.89 for the period 2002 through 2004, $22.75 in 2005, $33.83 in 2006, $30.14 in 2007 and $25.60 in 2008, and the average price per pound for our nickel-based and specialty alloys was $7.19 for the period 2002 through 2004, $11.25 in 2005, $14.35 in 2006, $19.16 in 2007 and $18.14 in 2008. A downturn in the commercial aerospace industry has had, and may in the future have, an adverse effect on the prices at which we are able to sell these and other products, and our results of operations, business and financial condition could be materially adversely affected.

 

Risks Associated with Strategic Capital Projects.

 

From time-to-time, we undertake strategic capital projects in order to enhance, expand and/or upgrade our facilities and operational capabilities. For instance, in 2006, 2007, and 2008 we announced major expansions of our titanium and premium-melt nickel-based alloy, superalloy and specialty alloy production capabilities and a new advanced specialty metals hot rolling and processing facility. Our ability to achieve the anticipated increased revenues or otherwise realize acceptable returns on these investments or other strategic capital projects that we may undertake is subject to a number of risks, many of which are beyond our control, including a variety of market, operational, permitting, and labor related factors. In addition, the cost to implement any given strategic capital project ultimately may prove to be greater than originally anticipated. If we are not able to achieve the anticipated results from the implementation of any of our strategic capital projects, or if we incur unanticipated implementation costs, our results of operations and financial position may be materially adversely affected.

 

Dependence on Critical Raw Materials Subject to Price and Availability Fluctuations.

 

We rely to a substantial extent on third parties to supply certain raw materials that are critical to the manufacture of our products. Purchase prices and availability of these critical raw materials are subject to volatility. At any given time we may be unable to obtain an adequate supply of these critical raw materials on a timely basis, on price and other terms acceptable, or at all.

 

If suppliers increase the price of critical raw materials, we may not have alternative sources of supply. In addition, to the extent that we have quoted prices to customers and accepted customer orders for products prior to purchasing necessary raw materials, or have existing contracts, we may be unable to raise the price of products to cover all or part of the increased cost of the raw materials.

 

The manufacture of some of our products is a complex process and requires long lead times. As a result, we may experience delays or shortages in the supply of raw materials. If unable to obtain adequate and timely deliveries of required raw materials, we may be unable to timely manufacture sufficient quantities of products. This could cause us to lose sales, incur additional costs, delay new product introductions, or suffer harm to our reputation.

 

We acquire certain important raw materials that we use to produce specialty materials, including nickel, chromium, cobalt, and titanium sponge, from foreign sources. Some of these sources operate in countries that may be subject to unstable political and economic conditions. These conditions may disrupt supplies or affect the prices of these materials.

 

Volatility of Raw Material Costs.

 

The prices for many of the raw materials we use have been extremely volatile. Since we value most of our inventory utilizing the last-in, first-out (LIFO) inventory costing methodology, a rapid rise in raw material costs has a negative effect on our operating results. Under the LIFO inventory valuation method, changes in the cost of raw materials and production activities are recognized in cost of sales in the current period even though these material and other costs may have been incurred at significantly different values due to the length of time of our production cycle. For example, in 2008 and 2007, the effect of falling raw material costs on our LIFO inventory valuation method resulted in cost of sales which were $169.0 million and $92.1 million,

respectively, lower than have been recognized had we utilized the first-in, first-out (FIFO) methodology to value our inventory. Conversely in 2006, the increase in raw material costs on the LIFO inventory valuation method resulted in cost of sales which was $197.0 million higher than would have been recognized if we utilized the FIFO methodology to value our inventory. In a period of rising raw material prices, cost of sales expense recognized under LIFO is generally higher than the cash costs incurred to acquire the inventory sold. However, in a period of declining raw material prices, cost of sales recognized under LIFO is generally lower than cash costs incurred to acquire the inventory sold.

 

Availability of Energy Resources.

 

We rely upon third parties for our supply of energy resources consumed in the manufacture of our products. The prices for and availability of electricity, natural gas, oil and other energy resources are subject to volatile market conditions. These market conditions often are affected by political and economic factors beyond our control. Disruptions in the supply of energy resources could temporarily impair the ability to manufacture products for customers. Further, increases in energy costs, or changes in costs relative to energy costs paid by competitors, has and may continue to adversely affect our profitability. To the extent that these uncertainties cause suppliers and customers to be more cost sensitive, increased energy prices may have an adverse effect on our results of operations and financial condition.

 

Risks Associated with Environmental Matters.

 

We are subject to various domestic and international environmental laws and regulations that govern the discharge of pollutants and disposal of wastes, and which may require that we investigate and remediate the effects of the release or disposal of materials at sites associated with past and present operations. We could incur substantial cleanup costs, fines and civil or criminal sanctions, third party property damage or personal injury claims as a result of violations or liabilities under these laws or non-compliance with environmental permits required at our facilities. We are currently involved in the investigation and remediation of a number of our current and former sites as well as third party sites.

 

With respect to proceedings brought under the federal Superfund laws, or similar state statutes, we have been identified as of December 31, 2008 as a potentially responsible party (PRP) at approximately 35 of such sites, excluding those at which we believe we have no future liability. Our involvement is limited or de minimis at approximately 27 of these sites, and the potential loss exposure with respect to any of the remaining 8 individual sites is not considered to be material.

 

We are a party to various cost-sharing arrangements with other PRPs at the sites. The terms of the cost-sharing arrangements are subject to non-disclosure agreements as confidential information. Nevertheless, the cost-sharing arrangements generally require all PRPs to post financial assurance of the performance of the obligations or to pre-pay into an escrow or trust account their share of anticipated site-related costs. In addition, the Federal government, through various agencies, is a party to several such arrangements.

 

We believe that we operate our businesses in compliance in all material respects with applicable environmental laws and regulations. However, from time-to-time, we are a party to lawsuits and other proceedings involving alleged violations of, or liabilities arising from, environmental laws. When our liability is probable and we can reasonably estimate our costs, we record environmental liabilities in our financial statements. In many cases, we are not able to determine whether we are liable, or if liability is probable, to reasonably estimate the loss or range of loss. Estimates of our liability remain subject to additional uncertainties, including the nature and extent of site contamination, available remediation alternatives, the extent of corrective actions that may be required, and the participation, number and financial condition of other PRPs, as well as the extent of their responsibility for the remediation. We intend to adjust our accruals to reflect new information as appropriate. Future adjustments could have a material adverse effect on our results of operations in a given period, but we cannot reliably predict the amounts of such future adjustments. At March 31, 2009, our reserves for environmental matters totaled approximately $18 million. Based on currently available information, we do not believe that there is a reasonable possibility that a loss exceeding the amount already accrued for any of the sites with which we are currently associated (either individually or

in the aggregate) will be an amount that would be material to a decision to buy or sell our securities. Future developments, administrative actions or liabilities relating to environmental matters, however, could have a material adverse effect on our financial condition or results of operations.

 

Risks Associated with Current or Future Litigation and Claims.

 

A number of lawsuits, claims and proceedings have been or may be asserted against us relating to the conduct of our currently and formerly owned businesses, including those pertaining to product liability, patent infringement, commercial, government contracting work, employment, employee benefits, taxes, environmental, health and safety and occupational disease, and stockholder matters. Due to the uncertainties of litigation, we can give no assurance that we will prevail on all claims made against us in the lawsuits that we currently face or that additional claims will not be made against us in the future. While the outcome of litigation cannot be predicted with certainty, and some of these lawsuits, claims or proceedings may be determined adversely to us, we do not believe that the disposition of any such pending matters is likely to have a material adverse effect on our financial condition or liquidity, although the resolution in any reporting period of one or more of these matters could have a material adverse effect on our results of operations for that period. Also, we can give no assurance that any other matters brought in the future will not have a material adverse effect on our financial condition, liquidity or results of operations.

 

Labor Matters.

 

We have approximately 9,600 full-time employees. A portion of our workforce is covered by various collective bargaining agreements, principally with the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International Union (the “USW”), including: approximately 2,745 Allegheny Ludlum production, office and maintenance employees covered by collective bargaining agreements, which are effective through June 2011; approximately 390 Allvac Albany, Oregon (Oremet) employees covered by a collective bargaining agreement, which is effective through June 2011; approximately 650 Wah Chang employees covered by a collective bargaining agreement, which is effective through March 2013; approximately 270 employees at the Casting Service facility in LaPorte, Indiana, covered by a collective bargaining agreement, which is effective through December 2011; approximately 140 employees at our Rome Metals facilities in western Pennsylvania, covered by a collective bargaining agreement which is effective through May 2013; and approximately 250 employees at our Portland Forge facility in Portland, Indiana, covered by collective bargaining agreements with three unions which are effective through April 2013.

 

Generally, collective bargaining agreements that expire may be terminated after notice by the union. After termination, the union may authorize a strike. A strike by the employees covered by one or more of the collective bargaining agreements could have a materially adverse effect on our operating results. There can be no assurance that we will succeed in concluding collective bargaining agreements with the unions to replace those that expire.

 

Export Sales.

 

We believe that export sales will continue to account for a significant percentage of our future revenues. Risks associated with export sales include: political and economic instability, including weak conditions in the world’s economies; accounts receivable collection; export controls; changes in legal and regulatory requirements; policy changes affecting the markets for our products; changes in tax laws and tariffs; and exchange rate fluctuations (which may affect sales to international customers and the value of profits earned on export sales when converted into dollars). Any of these factors could materially adversely affect our results for the period in which they occur.

 

Risks Associated with Retirement Benefits.

 

Our U.S. qualified defined benefit pension plan was underfunded as of December 31, 2008. In accordance with current funding regulations, we are not required to make a contribution to this pension plan in 2009. However, we may be required to fund the U.S. defined benefit pension plan in the years beyond 2009

depending upon the value of plan investments and obligations in the future and changes in laws or regulations that govern pension plan funding. Depending on the timing and amount, a requirement that we fund our defined benefit pension plan could have a material adverse effect on our results of operations and financial condition.

 

Risks Associated with Acquisition and Disposition Strategies.

 

We intend to continue to strategically position our businesses in order to improve our ability to compete. Strategies we employ to accomplish this may include seeking new or expanding existing specialty market niches for our products, expanding our global presence, acquiring businesses complementary to existing strengths and continually evaluating the performance and strategic fit of our existing business units. From time-to-time, management holds discussions with management of other companies to explore acquisition, joint ventures, and other business combination opportunities as well as possible business unit dispositions. As a result, the relative makeup of the businesses comprising our Company is subject to change. Acquisitions, joint ventures, and other business combinations involve various inherent risks, such as: assessing accurately the value, strengths, weaknesses, contingent and other liabilities and potential profitability of acquisition or other transaction candidates; the potential loss of key personnel of an acquired business; our ability to achieve identified financial and operating synergies anticipated to result from an acquisition or other transaction; and unanticipated changes in business and economic conditions affecting an acquisition or other transaction. International acquisitions and other transactions could be affected by export controls, exchange rate fluctuations, domestic and foreign political conditions and a deterioration in domestic and foreign economic conditions.

 

Internal Controls Over Financial Reporting.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

Insurance.

 

We have maintained various forms of insurance, including insurance covering claims related to our properties and risks associated with our operations. Our existing property and liability insurance coverages contain exclusions and limitations on coverage. From time-to-time, in connection with renewals of insurance, we have experienced additional exclusions and limitations on coverage, larger self-insured retentions and deductibles and significantly higher premiums. As a result, in the future our insurance coverage may not cover claims to the extent that it has in the past and the costs that we incur to procure insurance may increase significantly, either of which could have an adverse effect on our results of operations.

 

Political and Social Turmoil.

 

The war on terrorism and recent political and social turmoil, including terrorist and military actions and the implications of the military actions in Iraq and elsewhere, could put pressure on economic conditions in the United States and worldwide. These political, social and economic conditions could make it difficult for us, our suppliers and our customers to forecast accurately and plan future business activities, and could adversely affect the financial condition of our suppliers and customers and affect customer decisions as to the amount and timing of purchases from us. As a result, our business, financial condition and results of operations could be materially adversely affected.

 

Risks Associated with Government Contracts.

 

Some of our operating companies directly perform contractual work for the U.S. Government. Various claims (whether based on U.S. Government or Company audits and investigations or otherwise) could be asserted against us related to our U.S. Government contract work. Depending on the circumstances and the

outcome, such proceedings could result in fines, penalties, compensatory and treble damages or the cancellation or suspension of payments under one or more U.S. Government contracts. Under government regulations, a company, or one or more of its operating divisions or units, can also be suspended or debarred from government contracts based on the results of investigations. Currently, there is no material portion of our business with the U.S. Government which might be subject to renegotiation of profits or termination of contracts or subcontracts at the election of the U.S. Government.

 

Risks Relating to the Notes

 

Repayment of our debt, including the notes, is dependent on cash flow generated by our subsidiaries.

 

Our subsidiaries own a significant portion of our assets and conduct a significant portion of our operations. Accordingly, repayment of our indebtedness, including the notes, is dependent, to a significant extent, on the generation of cash flow by our subsidiaries and their ability to make such cash available to us, by dividend, debt repayment or otherwise. None of our subsidiaries initially will be required to guarantee the notes. Unless they are guarantors of the notes, our subsidiaries do not have any obligation to pay amounts due on the notes or to make funds available for that purpose. Our subsidiaries may not be able to, or may not be permitted to, make distributions to enable us to make payments in respect of our indebtedness, including the notes. Each subsidiary is a distinct legal entity and, under certain circumstances, legal and contractual restrictions may limit our ability to obtain cash from our subsidiaries. In the event that we do not receive distributions from our subsidiaries, we may be unable to make required principal and interest payments on our indebtedness, including the notes.

 

The notes will be structurally subordinated to all liabilities of our subsidiaries.

 

The notes will initially not be guaranteed by any of our subsidiaries and are therefore structurally subordinated to the indebtedness and other liabilities of our subsidiaries. These subsidiaries are separate and distinct legal entities and have no obligation, contingent or otherwise, to pay any amounts due pursuant to the notes, or to make any funds available therefor, whether by dividends, loans, distributions or other payments. Any right that we have to receive any assets of any of the subsidiaries upon the liquidation or reorganization of those subsidiaries, and the consequent rights of holders of notes to realize proceeds from the sale of any of those subsidiaries’ assets, will be effectively subordinated to the claims of those subsidiaries’ creditors, including trade creditors and holders of preferred equity interests of those subsidiaries. Accordingly, in the event of a bankruptcy, liquidation or reorganization of any of our subsidiaries, these subsidiaries will pay the holders of their debts, holders of preferred equity interests and their trade creditors before they will be able to distribute any of their assets to us.

 

We may not be able to repurchase the notes upon a fundamental change.

 

Upon a fundamental change as defined in the indenture, we will be required to make an offer to repurchase all outstanding notes at 100% of their principal amount, plus accrued and unpaid interest. We may not have sufficient financial resources to purchase all of the notes that are tendered upon a fundamental change repurchase offer. A failure to make the fundamental change repurchase offer or to pay the fundamental change repurchase price when due would result in a default under the indenture. The occurrence of a fundamental change would also constitute an event of default under our revolving credit facility and may constitute an event of default under the terms of the agreements governing our other indebtedness or require us to offer to repurchase such other indebtedness. See “Description of Notes — Fundamental Change Permits Holders to Require Us to Purchase Notes.”

 

There may be no active trading market for the notes.

 

The notes are a new issue of securities for which there is no established market. Accordingly, any or all of the following may occur:

 

 

 

If a public market were to exist, the notes could trade at prices that may be higher or lower than their principal amount or purchase price, depending on many factors, including prevailing interest rates, the market for similar notes, and our financial performance. We do not intend to list the notes on any securities exchange or to seek approval for quotations through any automated quotation system. No active market for the notes is currently anticipated.

 

The notes are not protected by restrictive covenants.

 

Neither we nor any of our subsidiaries will be restricted by the indenture from incurring any indebtedness or other obligation, paying dividends or making distributions on our capital stock or the capital stock of any of our subsidiaries or purchasing or redeeming our capital stock or the capital stock of any of our subsidiaries. In addition, we will not be required to maintain any financial ratios or specified levels of net worth or liquidity. In addition, the indenture does not contain covenants or other provisions to afford protection to holders of the notes in the event of a fundamental change involving us except to the extent described under “Description of Notes — Fundamental Change Permits Holders to Require Us to Purchase Notes” and “Description of Notes — Conversion Rights — Adjustment to Shares Delivered upon Conversion upon Certain Fundamental Changes.”

 

Recent developments in the convertible debt markets may adversely affect the market value of the notes.

 

The convertible debt markets have experienced unprecedented disruptions resulting from, among other things, the recent instability in the credit and capital markets and the emergency orders issued by the SEC on September 17 and 18, 2008 (and extended on October 1, 2008). These orders were issued as a stop-gap measure while Congress worked to provide a comprehensive legislative plan to stabilize the credit and capital markets. Among other things, these orders temporarily imposed a prohibition on effecting short sales of the common stock of certain financial companies. As a result, the SEC orders made the convertible arbitrage strategy that many convertible notes investors employ difficult to execute for outstanding convertible notes of those companies whose common stock was subject to the short sale prohibition. The SEC orders expired on Wednesday, October 8, 2008. However, the SEC and the New York Stock Exchange have indicated that they are currently considering instituting other limitations on effecting short sales (such as the up-tick rule), and other regulatory organizations may do the same. Any future governmental actions that interfere with the ability of convertible notes investors to effect short sales on the underlying common stock could significantly affect the market value of convertible securities, including the notes.

 

As a holder of notes, you will not be entitled to any rights with respect to our common stock, but you will be subject to all changes made with respect to our common stock.

 

If you hold notes, you will not be entitled to any rights with respect to our common stock into which your notes may be converted (including, without limitation, voting rights and rights to receive any dividends or other distributions on our common stock), but you will be subject to all changes affecting our common stock. You will have the rights with respect to our common stock into which your notes may be converted only if you receive our common stock upon conversion and only as of the date when you become an owner of the shares of our common stock upon such conversion. For example, in the event that an amendment is proposed to our charter or by-laws requiring stockholder approval and the record date for determining the stockholders of record entitled to vote on the amendment occurs prior to the date you are deemed the owner of the shares of our common stock due upon conversion, you will not be entitled to vote on the amendment, although you will nevertheless be subject to any changes in the powers, preferences or special rights of our common stock.

The market price of the notes is expected to be significantly affected by the market price of our common stock, which may continue to be volatile and will be affected by factors beyond our control.

 

We expect that the market price of our notes will be significantly affected by the market price of our common stock. This may result in greater volatility in the market price of the notes than would be expected for nonconvertible debt securities. The market price of our common stock has been and may continue to be subject to significant fluctuations due not only to general stock market conditions but also to a change in sentiment in the market regarding our operations, business prospects, liquidity or this offering. During the period from January 1, 2008 to May 27, 2009, our common stock has fluctuated from a high of $87.32 per share to a low of $15.00 per share. The market price of our common stock will likely continue to fluctuate in response to the factors discussed under “Risk Factors — Risks Relating to Our Business.”

 

The conversion rate for notes may not be adjusted for all dilutive events.

 

The conversion rate of the notes is subject to adjustment for certain events, including, but not limited to, the issuance of stock dividends on our common stock, the issuance of certain rights or warrants, subdivisions, combinations, distributions of capital stock, indebtedness or assets, cash dividends and certain issuer tender or exchange offers as described under “Description of Notes — Conversion Rights — Conversion Rate Adjustments.” The conversion rate will not be adjusted, however, for other events, such as a third-party tender or exchange offer or an issuance of common stock for cash, that may adversely affect the trading price of the notes or our common stock. In addition, an event that adversely affects the value of the notes may occur, and that event may not result in an adjustment to the conversion rate.

 

Some significant restructuring transactions may not constitute a fundamental change, in which case we would not be obligated to offer to purchase the notes.

 

Upon the occurrence of certain fundamental change transactions described under “Description of Notes — Fundamental Change Permits Holders to Require Us to Purchase Notes,” you have the right to require us to repurchase your notes. However, the fundamental change provisions will only afford protection to holders of notes in the event of certain transactions. Other transactions such as leveraged recapitalizations, refinancings, restructurings, or acquisitions initiated by us may not constitute a fundamental change requiring us to repurchase the notes. In the event of any such transaction, the holders would not have the right to require us to repurchase the notes, even though each of these transactions could increase the amount of our indebtedness or otherwise adversely affect our capital structure or any credit ratings, thereby adversely affecting the holders of notes.

 

The adjustment to the applicable conversion rate for notes converted in connection with a fundamental change may not adequately compensate you for any lost value of your notes as a result of such transaction.

 

If a fundamental change, as described under “Description of Notes — Fundamental Change Permits Holders to Require Us to Purchase Notes,” occurs, under certain circumstances we will increase the applicable conversion rate by a number of additional shares of our common stock for notes converted in connection with such fundamental change. The increase in the applicable conversion rate will be determined based on the date on which the fundamental change becomes effective and the price paid per share of our common stock in, or the price of our common stock over a 10 trading-day period immediately preceding the effective date of, such transaction, as described under “Description of Notes — Conversion Rights — Adjustment to Shares Delivered upon Conversion upon Certain Fundamental Changes.” The adjustment to the applicable conversion rate for notes converted in connection with a fundamental change may not adequately compensate you for any lost value of your notes as a result of such transaction. In addition, if the stock price for such transaction (determined as described under “Description of Notes — Conversion Rights — Adjustment to Shares Delivered upon Conversion upon Certain Corporate Transactions”) is greater than $150.00 per share, or if such price is less than $32.15 per share (each such price, subject to adjustment), no adjustment will be made to the applicable conversion rate.

Our obligation to increase the applicable conversion rate in connection with any such fundamental change could be considered a penalty, in which case the enforceability thereof would be subject to general principles of reasonableness of economic remedies. An increase in the conversion rate may be treated as a distribution subject to tax as a dividend. You should carefully consider the information under “Material U.S. Federal Income Tax Considerations.”

 

The fundamental change provisions may delay or prevent an otherwise beneficial takeover attempt of us.

 

The fundamental change purchase rights, which will allow noteholders to require us to purchase all or a portion of their notes upon the occurrence of a fundamental change, as defined in “Description of Notes — Fundamental Change Permits Holders to Require Us to Purchase Notes,” and the provisions requiring an increase to the conversion rate for conversions in connection with fundamental changes may in certain circumstances delay or prevent a takeover of us and the removal of incumbent management that might otherwise be beneficial to investors.

 

Conversion of the notes may dilute the ownership interest of existing stockholders, including holders who have previously converted their notes.

 

The conversion of some or all of the notes may dilute the ownership interests of existing stockholders. Any sales in the public market of any of our common stock issuable upon such conversion could adversely affect prevailing market prices of our common stock. In addition, the anticipated conversion of the notes into shares of our common stock or a combination of cash and shares of our common stock could depress the price of our common stock.

 

You may be subject to tax upon an adjustment to, or a failure to adjust, the conversion rate of the notes even though you do not receive a corresponding cash distribution.

 

The conversion rate of the notes is subject to adjustment in certain circumstances, including the payment of certain cash dividends. If the conversion rate is adjusted as a result of a distribution that is taxable to our common stockholders, such as a cash dividend, you will be deemed to have received for U.S. federal income tax purposes a taxable dividend to the extent of our earnings and profits without the receipt of any cash. In addition, a failure to adjust (or adjust adequately) the conversion rate after an event that increases your proportionate interest in us could be treated as a deemed taxable dividend to you. If you are a Non-U.S Holder (as defined in “Material U.S. Federal Income Tax Considerations”), such deemed dividend may be subject to U.S. federal withholding tax (currently at a 30% rate, or such lower rate as may be specified by an applicable treaty), which may be set off against subsequent payments on the notes. See “Description of Notes — Conversion Rights — Conversion Rate Adjustment” and “Material U.S. Federal Income Tax Considerations.” If a fundamental change occurs on or prior to the stated maturity date of the notes, under some circumstances, we will increase the conversion rate for notes converted in connection with such fundamental change. Such increase may be treated as aft distribution subject to U.S. federal income tax as a dividend. See “Material U.S. Federal Income Tax Considerations.”

 

We estimate that the net proceeds we will receive from this offering will be approximately $338.9 million ($389.8 million if the underwriters exercise their option to purchase additional notes in full) after deducting the underwriters’ discount and estimated offering expenses. We intend to use the net proceeds of this offering to manage our liabilities and other obligations, such as by making voluntary contributions to our defined benefit pension trust and voluntary contributions to trusts established to fund retiree medical benefits, and the balance for general corporate purposes.

 

We intend to use the net proceeds from our senior notes offering, which we estimate to be approximately $344.3 million, to fund the purchase of our 8.375% Notes due 2011 in the tender offer and for general corporate purposes. Completion of the senior notes offering is not conditioned upon any minimum level of acceptance in the tender offer. Neither this offering nor the senior notes offering is conditioned upon completion of the other offering. The outstanding 8.375% notes, which, as of March 31, 2009, totaled $300.0 million in aggregate principal amount, are schedule to mature on December 15, 2011.

 

Until the net proceeds from this offering and the senior notes offering are applied to the purchase of 8.375% notes, to manage our pension and retiree medical benefits liabilities or to other general corporate purposes, we may invest proceeds in short-term, investment grade interest-bearing securities or in obligations of, or guaranteed by, the U.S. government.

 

Our common stock is listed on the New York Stock Exchange under the symbol “ATI.” The following table sets forth, for the periods indicated, the high and low sales prices per share of our common stock as reported on the NYSE and the dividends declared per share of our common stock.

 

 

The last reported sale price of our common stock on the New York Stock Exchange on May 27, 2009 was $32.15 per share. As of April 28, 2009, there were 98,017,737 shares of our common stock outstanding held by approximately 5,400 registered holders.

 

The payment of dividends, if any, and the amount of such dividends depends upon matters deemed relevant by our Board of Directors on a quarterly basis, such as our results of operations, financial condition, cash requirements, future prospects, any limitations imposed by law, credit agreements or debt securities and other factors deemed relevant and appropriate. While we have historically paid cash dividends on our common stock on a quarterly basis, no assurance can be given that we will continue to pay dividends on our common stock in a manner and amount consistent with our historic practices, or at all, in the future.

 

The following table sets forth our consolidated capitalization at March 31, 2009:

 

 

 

 

 

We derived the selected consolidated financial data shown below as of December 31, 2008, 2007, 2006, 2005 and 2004 and for each of the years then ended from our audited consolidated financial statements and for the three month periods ended March 31, 2009 and 2008 from our unaudited consolidated financial statements. The selected consolidated financial data for periods prior to 2009 reflect the retrospective application of FASB Statement No. 160, “Noncontrolling Interests in Consolidated Financial Statements”, which we adopted, as required, on January 1, 2009. The unaudited financial statements from which we derived this data were prepared on the same basis as the audited consolidated financial data and include all adjustments, consisting only of normal recurring adjustments, necessary to present fairly our results of operations and financial condition as of the periods presented. The results of operations for interim periods are not necessarily indicative of the operating results for any future period. You should read the following financial information in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and the related notes incorporated by reference in this prospectus supplement.

 

 

 

 

 

Allegheny Technologies is one of the largest and most diversified specialty metals producers in the world. We use innovative technologies to offer growing global markets a wide range of specialty metals solutions. Our products include titanium and titanium alloys, nickel-based alloys and superalloys, zirconium, hafnium and niobium, stainless and specialty steel alloys, grain-oriented electrical steel, tungsten-based materials and cutting tools, carbon alloy impression die forgings, and large grey and ductile iron castings. Our specialty metals are produced in a wide range of alloys and product forms and are selected for use in applications that demand metals having exceptional hardness, toughness, strength, resistance to heat, corrosion or abrasion, or a combination of these characteristics.

 

We focus our technological and unsurpassed manufacturing capabilities to serve global end use markets with highly diversified and specialized product offerings. Strategic end use markets for our products include:

 

Aerospace and Defense

 

We are a world leader in the production of premium titanium alloys, nickel-based and cobalt-based alloys and superalloys, and vacuum-melted specialty alloys used in the manufacture of both commercial and military jet engines, as well as replacement parts for those engines. We also produce titanium alloys, vacuum-melted specialty alloys, and high-strength stainless alloys for use in commercial and military airframes, airframe components and missiles. ATI produces unique titanium and high-hard steel alloys as well as engineered parts and castings for the current and next-generation armor vehicles.

 

Titanium and titanium alloys are critical metals in aerospace and defense applications. Titanium and titanium alloys possess an extraordinary combination of properties, including superior strength-to-weight ratio, good elevated temperature resistance, low coefficient of thermal expansion, and extreme corrosion resistance. These metals are used to produce jet engine components such as blades, vanes, discs, and casings, and airframe components such as structural members, landing gear, hydraulic systems, and fasteners. The latest and next-generation airframes and jet engines use even more titanium and titanium alloys in component parts in order to minimize weight and maximize fuel efficiency.

 

Our nickel-based alloys and superalloys and specialty alloys are also widely used in aerospace and defense applications. Nickel-based alloys and superalloys remain extremely strong at high temperatures and resist degradation under extreme conditions. Typical aerospace applications for nickel-based alloys and superalloys include jet engine shafts, discs, blades, vanes, rings and casings.

 

Our specialty alloys include vacuum-melted maraging steels used in the manufacture of aircraft landing gear and structural components, as well as jet engine components.

 

We continuously seek to develop new alloys to better serve the needs of this end use market. For example, we have developed ATI 425^® titanium, a new cold-rollable alloy, as a lower cost alternative to the most popular high-strength titanium alloys, for use in airframe components. We have also developed Allvac^® 718 Plus^® alloy, a new nickel-based superalloy that can withstand higher temperatures than the standard 718 superalloy, for use in the next generation of fuel efficient jet engines. ATI 425^® — MIL cold-rollable titanium is an innovative new armor alloy that has the advantage of superior formability as compared to conventional high-strength titanium alloys. ATI 500^tm — MIL high-hard steel armor is an innovative armor material that meets the demanding specifications for superior ballistic performance and is easier to fabricate than similar armor materials.

 

Demand for our products by the aerospace and defense market has increased significantly over the last several years. Based on current forecasts and existing backlogs reported by the two manufacturers of large commercial aircraft, we expect demand in this market to remain strong over the next several years. However, near-term growth could be limited due to the weakening global economy, which resulted in a significant decline in our aerospace and defense sales in the quarter ended March 31, 2009. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Results of Operations” in our quarterly report on Form 10-Q for the three months ended March 31, 2009, which is incorporated by reference in this prospectus supplement.

Chemical Process Industry and Oil and Gas

 

The environments in which oil and gas can be found in commercial quantities have become more challenging, involving deep offshore wells, high pressure and temperature conditions, sour wells and unconventional sources, such as oil sands. There is also increased interest in biofuels, such as ethanol, as an alternative or supplement to gasoline and other fossil fuels. Ethanol is corrosive and our specialty alloys are used in its manufacture and storage.

 

All of our business segments produce metals that are critical to the chemical process industry and oil and gas industry. Our specialty metals, including titanium and titanium alloys, nickel-based alloys, zirconium alloys, stainless steel alloys and other specialty alloys, have the strength and corrosion resistant properties necessary in the chemical process industry, and global demand for these materials has been increasing in recent years, particularly in growing industrial markets in Asia. We also provide advanced specialty metals used in offshore oil and gas production, including offshore piping systems and subsea oil and gas fields.

 

We continuously seek to develop new alloys to better serve the needs of this end use market. For example, we have developed AL 2003^tm lean duplex alloy for use in deep-water oil and gas applications. ATI 2003 lean duplex stainless, ATI 2205^tm duplex stainless, and AL-6XN^® superaustenitic stainless steel in strip and plate product forms are NORSOK qualified. ATI’s titanium castings are also qualified under NORSOK standards. The NORSOK standards are developed by the Norwegian petroleum industry and are intended to identify metals used in oil and gas applications that are safe and cost-effective.

 

Tungsten is the most dense and heat resistant metal commercially available. One application for our tungsten products is oil and gas drill bit inserts. As drilling methods, including directional drilling, become more complex, our advanced tungsten carbide and diamond matrix materials are often utilized in order to enable faster drilling and longer drill bit life.

 

Electrical Energy

 

Our specialty metals are widely used in the global electric power generation and distribution industry. We believe that U.S. and European energy needs and environmental policies and the electrification of developing countries will continue to drive demand for our specialty metals products that we sell for use in this industry.

 

Coal-fired power plants account for more than one-half of the electricity produced in the United States. Under the Clean Air Interstate Rule adopted by the U.S. Environmental Protection Agency (EPA), power plants in several eastern states will be required, in stages through 2015, to dramatically reduce emissions of sulfur dioxide and nitrous oxide generated from the burning of coal. Most of these plants will be required to install additional filtration systems, or “scrubbers”, which are made of specialty metals we produce, on their smokestacks to comply with the rule. Demand for our specialty metals for pollution control systems is also significant in growing industrial economies, including China. We supply a broad range of alloys, including many proprietary alloys, for these applications. AL-6XN alloy, a 6-molybdenum super-austenitic alloy, is used in absorber towers, piping, damper doors, ducting and vessels. The nickel-based ATI 22^tm and ATI 276^tm alloys are used in the absorber inlet, absorber outlet ducting, damper door seals, and expansion joints.

 

Nuclear power plants are a sustainable source of electrical energy, and plans to construct and refurbish nuclear power plants have been announced in many areas of the world. ATI is a premier supplier of certified nuclear-grade alloys and specialty alloys for applications that range from the reactor core to steam water systems to spent-fuel storage, transportation and repository activities. ATI has a track record in the nuclear energy market that dates to the first commercial nuclear energy reactor built in the United States. We are investing to expand our production capabilities and capacity to support expected growth of the nuclear energy market. We are expanding our zirconium sponge capacity, which yields hafnium as a byproduct. Zirconium alloys are used for fuel cladding, end pins, fuel bundle components, and core pressure tubes.

 

For electrical power generation, our specialty metals and corrosion resistant alloys (CRAs) and ductile iron castings are used in coal, nuclear, natural gas, and wind power applications. In coal-fired plants, our CRAs are used for pipe, tube, and heat exchanger applications in water systems in addition to the pollution control scrubbers mentioned above. For nuclear power plants, we are an industry pioneer in producing reactor-

grade zirconium and hafnium alloys nuclear fuel cladding and structural components. Our CRAs are also used in water systems for nuclear power plants. We are a technology leader for large diameter nickel-based superalloys used in natural gas turbines for power generation. We are also one of a few producers of very large ductile iron castings used for wind turbines.

 

For electrical power distribution, our grain-oriented electrical steel (GOES) is used in large and small power transformers, where electrical conductivity and magnetic properties are important. We believe that demand for these advanced specialty metals is in the early stage of an expected long growth cycle as the U.S. rebuilds its electrical energy distribution grid and as developing countries, such as China and India, electrify and build electrical power distribution grids. The U.S. Department of Energy (DOE) published its final rule on distribution transformer efficiency on October 12, 2007, regarding minimum energy efficiency standard levels for electrical energy distribution transformers beginning January 1, 2010. This DOE rule establishes requirements for more efficient transformers, which increases premium grade GOES usage per transformer. ATI is a leading producer of these premium grades of GOES.

 

Medical

 

ATI’s advanced specialty metals are used in medical device products that save and enhance the quality of lives.

 

Our zirconium-niobium, titanium-and cobalt-based alloys are used for knees, hips and other prosthetic devices. These replacement devices offer the potential of lasting much longer than previous implant options.

 

Our biocompatible nickel-titanium shape memory alloy is used for stents to support collapsed or clogged blood vessels. Reduced in diameter for insertion, these stents expand to the original tube-like shape due to the metal’s superelasticity. Our ultra fine diameter (0.002 inch/0.051 mm) titanium wire is used for screens to prevent blood clots from entering critical areas of the body. In addition, our titanium bar and wire are used to make surgical screws for bone repairs.

 

Manufacturers of magnetic resonance imaging (MRI) devices rely on our niobium superconducting wire to help produce electromagnetic fields that allow physicians to safely scan the body’s soft tissue. In addition, our tungsten heavy alloy materials are used for shielding applications in MRI devices.

 

Enhancing and Expanding Our Manufacturing Capabilities and Capacity

 

Demand for our products from the aerospace and defense and chemical process industry and oil and gas, electrical energy, and medical markets increased significantly over the last several years. We are currently undertaking a multi-phase program to enhance and expand our capabilities and capacities to produce premium specialty metals aimed at these strategic markets. Over the last four years we have invested approximately $1.3 billion of internally generated funds to renew and expand our annual titanium sponge production capabilities to approximately 46 million pounds; expand our premium titanium alloy melt and remelt capacity; expand our nickel-based alloy and superalloy melt and remelt capacity; expand our titanium and specialty alloy plate capacity; and expand our premium titanium and nickel-based superalloy forging capacity. We believe these investments will strengthen and enhance ATI’s leadership position in the production of high technology specialty metals.

 

Business Segments

 

We operate in the following three business segments, which accounted for the following percentages of total revenues of $5.3 billion, $5.5 billion, and $4.9 billion for the years ended December 31, 2008, 2007, and 2006, respectively:

 

High Performance Metals Segment

 

Our High Performance Metals segment produces, converts and distributes a wide range of high performance alloys, including nickel- and cobalt-based alloys and superalloys, titanium and titanium-based alloys, exotic metals such as zirconium, hafnium, niobium, nickel-titanium, and their related alloys, and other specialty alloys, primarily in long product forms such as ingot, billet, bar, shapes and rectangles, rod, wire, seamless tube, and castings. We are integrated from raw materials (sponge) to melt, remelt, and finish processing in our titanium and titanium alloys, and zirconium and hafnium alloys products. The major end markets served by our High Performance Metals segment are aerospace and defense, chemical process industry, oil and gas, electrical energy, and medical. Most of the products in our High Performance Metals segment are sold directly to end-use customers. A significant portion of our High Performance Metals segment products are sold under multi-year agreements. The operating units in this segment are ATI Allvac, ATI Allvac Ltd (U.K.) and ATI Wah Chang.

 

Approximately 70% of High Performance Metals segment revenue is derived from the aerospace and defense market. Demand for our products is driven primarily by the commercial aerospace cycle and the growing use of our specialty metals, particularly titanium alloys, in the latest and future generations of airframes and jet engines. Large aircraft and aircraft engines are manufactured by a small number of companies, such as The Boeing Company, Airbus S.A.S (an EADS company), Bombardier Aerospace (a division of Bombardier Inc.), Embraer (Empresa Brasileira de Aeronáutica S.A.) for airframes, and GE — Aviation (a division of General Electric Company), Pratt & Whitney (a United Technologies Corp. company), Rolls-Royce, Snecma, SAFRAN Group, and joint ventures for jet engines. These companies and their suppliers form a substantial part of our customer base in this business segment. ATI supplies the aerospace and defense supply chain with nickel- and cobalt-based alloys, titanium alloys, and vacuum-melted specialty alloys for commercial and military jet engines, both original engines and spare parts. For commercial and military airframe and structural parts, ATI manufactures titanium alloys, vacuum-melted specialty alloys, and high-strength stainless alloys. The loss of one or more of our customers in the aerospace and defense market could have a material adverse effect on ATI’s results of operations and financial condition.

 

Flat-Rolled Products Segment

 

Our Flat-Rolled Products segment produces, converts and distributes stainless steel, nickel-based alloys, titanium and titanium-based alloys and specialty alloys, in a variety of product forms, including plate, sheet, engineered strip, and Precision Rolled Strip^® products, as well as grain-oriented electrical steel sheet. The major end markets for our flat-rolled products are chemical process industry, oil and gas, electrical energy, automotive, food equipment and appliances, machine and cutting tools, construction and mining, aerospace and defense, and electronics, communication equipment and computers. The operations in this segment are ATI Allegheny Ludlum, our 60% interest in the Chinese joint venture company known as Shanghai STAL Precision Stainless Steel Company Limited (STAL), and our 50% interest in the industrial titanium joint venture known as Uniti LLC. The remaining 40% interest in STAL is owned by the Baosteel Group, a state authorized investment company whose equity securities are publicly traded in the People’s Republic of China. The remaining 50% interest in Uniti LLC is held by Verkhnaya Salda Metallurgical Production Association (VSMPO), a Russian producer of titanium, aluminum, and specialty steel products.

 

Stainless steel, nickel-based alloys and titanium sheet products are used in a wide variety of industrial and consumer applications. In 2008, approximately 60% by volume of our stainless sheet products were sold to independent service centers, which have slitting, cutting or other processing facilities, with the remainder sold directly to end-use customers.

 

Engineered strip and very thin Precision Rolled Strip products are used by customers to fabricate a variety of products primarily in the automotive, construction, and electronics markets. In 2008, approximately 85% by volume of our engineered strip and Precision Rolled Strip products were sold directly to end-use customers or through our own distribution network, with the remainder sold to independent service centers.

Stainless steel, nickel-based alloy and titanium plate products are primarily used in industrial markets. In 2008, approximately 50% by volume of our plate products were sold to independent service centers, with the remainder sold directly to end-use customers.

 

Grain-oriented electrical steel is used in power transformers where electrical conductivity and magnetic properties are important. Nearly all of our grain-oriented electrical steel products are sold directly to end-use customers.

 

Engineered Products Segment

 

The principal business of our Engineered Products segment includes the production of tungsten powder, tungsten heavy alloys, tungsten carbide materials, and tungsten carbide cutting tools. We are now integrated from the raw materials (ammonium paratungstate (APT)) to the manufacture of finished cutting tools. The segment also produces carbon alloy steel impression die forgings, and large grey and ductile iron castings, and provides precision metals processing services. The operating units in this segment are ATI Metalworking Products, ATI Portland Forge, ATI Casting Service and ATI Rome Metals.

 

We produce a line of sintered tungsten carbide products that approach diamond hardness for industrial markets including automotive, chemical process industry, oil and gas, machine and cutting tools, aerospace, construction and mining, and other markets requiring tools with extra hardness. Technical developments related to ceramics, coatings and other disciplines are incorporated in these products. We also produce tungsten and tungsten carbide powders.

 

We forge carbon alloy steels into finished forms that are used primarily in the transportation and construction equipment markets. We also cast grey and ductile iron metals used in the transportation, wind power generation and automotive markets. We have precision metals processing capabilities that enable us to provide process services for most high-value metals from ingots to finished product forms. Such services include grinding, polishing, blasting, cutting, flattening, and ultrasonic testing.

 

Competition

 

Markets for our products and services in each of our three business segments are highly competitive. We compete with many producers and distributors who, depending on the product involved, range from large diversified enterprises to smaller companies specializing in particular products. Factors that affect our competitive position are the quality of our products, services and delivery capabilities, our capabilities to produce a wide range of specialty materials in various alloys and product forms, our technological capabilities including our research and development efforts, our marketing strategies, the prices for our products and services, our manufacturing costs, and industry manufacturing capacity.

 

We face competition from both domestic and foreign companies. Some of our foreign competitors are either directly or indirectly government subsidized. In 1999, the United States imposed antidumping and countervailing duties on dumped and subsidized imports of stainless steel sheet and strip in coils and stainless steel plate in coils from companies in ten foreign countries. These duties were reviewed by the U.S. Commerce Department and the U.S. International Trade Commission in 2005 and generally remain in effect. We continue to monitor unfairly traded imports from foreign producers for appropriate action.

Major Competitors

 

Nickel-based alloys and superalloys and specialty steel alloys

 

 

Titanium and titanium-based alloys

 

 

Exotic alloys

 

 

Stainless steel

 

 

 

Tungsten and tungsten carbide products

 

 

KEY — A = Primarily High Performance Metals segment, B = Primarily Flat-Rolled Products segment, C = Both High Performance Metals and Flat-Rolled Products segments, D = Primarily Engineered Products segment

 

Raw Materials and Supplies

 

Substantially all raw materials and supplies required in the manufacture of our products are available from more than one supplier and presently the sources and availability of raw materials essential to our

businesses are adequate. The principal raw materials we use in the production of our specialty metals are scrap (including iron-, nickel-, chromium-, titanium-, molybdenum-, and tungsten-bearing scrap), nickel, titanium sponge, zirconium sand and sponge, ferrochromium, ferrosilicon, molybdenum and molybdenum alloys, manganese and manganese alloys, cobalt, niobium, vanadium and other alloying materials.

 

Purchase prices of certain principal raw materials have been volatile. As a result, our operating results may be subject to significant fluctuation. We use raw materials surcharge and index mechanisms to offset the impact of increased raw material costs; however, competitive factors in the marketplace may limit our ability to institute such mechanisms, and there can be a delay between the increase in the price of raw materials and the realization of the benefit of such mechanisms. For example, in 2008 we used approximately 80 million pounds of nickel; therefore a hypothetical increase of $1.00 per pound in nickel prices would result in increased costs of approximately $80 million. We also used approximately 500 million pounds of ferrous scrap in the production of our flat-rolled products in 2008 so that a hypothetical increase of $0.01 per pound in ferrous scrap prices would result in increased costs of approximately $5 million.

 

While we are increasing our manufacturing capacity to produce titanium sponge, the major raw material for our titanium products, a portion of our needs, together with certain other raw materials, such as nickel, cobalt, and ferrochromium, are available to us and our specialty metals industry competitors primarily from foreign sources. Some of these foreign sources are located in countries that may be subject to unstable political and economic conditions, which might disrupt supplies or affect the price of these materials.

 

We purchase our nickel requirements principally from producers in Australia, Canada, Norway, Russia, and the Dominican Republic. Zirconium sponge is purchased from a source in France, while zirconium sand is purchased from both U.S. and Australian sources. Cobalt is purchased primarily from producers in Canada. More than 80% of the world’s reserves of ferrochromium are located in South Africa, Zimbabwe, Albania, and Kazakhstan. We also purchase titanium sponge from sources in Kazakhstan and Japan.

 

Export Sales and Foreign Operations

 

Direct international sales represented approximately 28% of our total annual sales in 2008, 27% of our total sales in 2007, and 24% of our total sales in 2006. These figures include direct export sales by our U.S.-based operations to customers in foreign countries, which accounted for approximately 21% of our total sales in 2008, 19% of our total sales in 2007, and 16% of our total sales in 2006. Our overseas sales, marketing and distribution efforts are aided by our international marketing and distribution offices, ATI Europe, ATI Europe Distribution, and ATI Asia, or by independent representatives located at various locations throughout the world. We believe that nearly 50% of ATI’s 2008 sales were driven by global markets when we consider exports of our customers.

 

Direct sales by geographic area in 2008, and as a percentage of total sales, were as follows:

 

 

ATI Allvac Ltd has manufacturing capabilities for melting, remelting, forging and finishing nickel-based alloys and specialty alloys in the United Kingdom. ATI Metalworking Products, which has manufacturing capabilities in the United Kingdom and Switzerland, sells high precision threading, milling, boring and drilling components, tungsten carbide burrs, rotary tooling and specialty abrasive wheels and discs for the European market from locations in the United Kingdom, Switzerland, Germany, France, Italy and Spain. Our STAL joint venture in the People’s Republic of China produces Precision Rolled Strip products, which enables us to offer

these products more effectively to markets in China and other Asian countries. Our Uniti LLC joint venture allows us to offer titanium products to industrial markets more effectively worldwide.

 

Backlog, Seasonality and Cyclicality

 

Our backlog of confirmed orders was approximately $1.3 billion at December 31, 2008 and $1.0 billion at December 31, 2007. We expect that approximately 95% of confirmed orders on hand at December 31, 2008 will be filled during the year ending December 31, 2009. Backlog of confirmed orders of our High Performance Metals segment was approximately $674 million at December 31, 2008 and $683 million at December 31, 2007. We expect that approximately 93% of the confirmed orders on hand at December 31, 2008 for this segment will be filled during the year ending December 31, 2009. Backlog of confirmed orders of our Flat-Rolled Products segment was approximately $0.5 billion at December 31, 2008 and $0.2 billion at December 31, 2007. We expect that all of the confirmed orders on hand at December 31, 2008 for this segment will be filled during the year ending December 31, 2009.

 

Generally, our sales and operations are not seasonal. However, demand for our products is cyclical over longer periods because specialty metals customers operate in cyclical industries and are subject to changes in general economic conditions and other factors both external and internal to those industries.

 

Research, Development and Technical Services

 

We believe that our research and development capabilities give ATI an advantage in developing new products and manufacturing processes that contribute to the profitable growth potential of our businesses on a long-term basis. We conduct research and development at our various operating locations both for our own account and, on a limited basis, for customers on a contract basis. Research and development expenditures for each of our three segments for the years ended December 31, 2008, 2007, and 2006 included the following:

 

 

Our research, development and technical service activities are closely interrelated and are directed toward cost reduction and process improvement, process control, quality assurance and control, system development, the development of new manufacturing methods, the improvement of existing manufacturing methods, the improvement of existing products, and the development of new products.

 

We own hundreds of United States patents, many of which are also filed under the patent laws of other nations. Although these patents, as well as our numerous trademarks, technical information, license agreements, and other intellectual property, have been and are expected to be of value, we believe that the loss of any single such item or technically related group of such items would not materially affect the conduct of our business.

Environmental, Health and Safety Matters

 

We are subject to various domestic and international environmental laws and regulations that govern the discharge of pollutants, and disposal of wastes, and which may require that we investigate and remediate the effects of the release or disposal of materials at sites associated with past and present operations. We could incur substantial cleanup costs, fines, civil or criminal sanctions, third party property damage or personal injury claims as a result of violations or liabilities under these laws or non-compliance with environmental permits required at our facilities. We are currently involved in the investigation and remediation of a number of our current and former sites as well as third party sites.

 

We consider environmental compliance to be an integral part of our operations. We have a comprehensive environmental management and reporting program that focuses on compliance with all federal, state, regional and local environmental laws and regulations. Each operating company has an environmental management system that includes mechanisms for regularly evaluating environmental compliance and managing changes in business operations while assessing environmental impact.

 

Our Corporate Guidelines for Business Conduct and Ethics address compliance with environmental laws as well as employment and workplace safety laws, and also describe our commitment to equal opportunity and fair treatment of employees. We continued to realize significant progress in safety across ATI’s operations. As a result of our continuing focus on and commitment to safety, in 2008 our OSHA Total Recordable Incident Rate improved by 17% to 2.51 and our Lost Time Case Rate improved by 35% to 0.34, which we believe to be competitive with world class performance.

 

Employees

 

We have approximately 9,600 full-time employees. A portion of our workforce is covered by various collective bargaining agreements, principally with the USW, including: approximately 2,745 Allegheny Ludlum production, office and maintenance employees covered by collective bargaining agreements that are effective through June 2011, approximately 390 Allvac Albany, Oregon (Oremet) employees covered by a collective bargaining agreement that is effective through June 2011, approximately 650 Wah Chang employees covered by a collective bargaining agreement that continues through March 2013, approximately 270 employees at our Casting Service facility in LaPorte, Indiana, covered by a collective bargaining agreement that is effective through December 2011, approximately 140 employees at our Rome Metals facilities in western Pennsylvania, covered by a collective bargaining agreement that is effective through May 2013, and approximately 250 employees at our Portland Forge facility in Portland, Indiana, covered by collective bargaining agreements with three unions that are effective through April 2013.

 

The Company’s executive officers under the federal securities laws and members of the Company’s management executive committee as of March 31, 2009 are as follows:

 

 

 

 

Set forth below are descriptions of the business background for the past five years of the Company’s executive management.

 

L. Patrick Hassey has been President and Chief Executive Officer since October 1, 2003. He was elected to the Company’s Board of Directors in July 2003 and has served as Chairman since May 2004. Prior to this position, he worked as an outside management consultant to Allegheny Technologies’ executive management team. Mr. Hassey was Executive Vice President and a member of the corporate executive committee of Alcoa, Inc. at the time of his early retirement in February 2003. He had served as Executive Vice President of Alcoa and Group President of Alcoa Industrial Components from May 2000 to October 2002. Prior to May 2000, he served as Executive Vice President of Alcoa and President of Alcoa Europe, Inc.

 

Richard J. Harshman has served as Executive Vice President, Finance since October 2003 and Chief Financial Officer since December 2000. Mr. Harshman was Senior Vice President, Finance from December 2001 to October 2003 and Vice President, Finance from December 2000 to December 2001. Previously, he had served in a number of financial management roles for Allegheny Technologies Incorporated and Teledyne, Inc.

 

Jon D. Walton has been Executive Vice President, Human Resources, Chief Legal and Compliance Officer, General Counsel and Corporate Secretary since October 2003. Mr. Walton was Senior Vice President, Chief Legal and Administrative Officer from July 2001 to October 2003. Previously, he was Senior Vice President, General Counsel and Secretary.

 

Dale G. Reid has served as Vice President, Controller, Chief Accounting Officer and Treasurer since December 2003. Mr. Reid was Vice President, Controller and Chief Accounting Officer from December 2000 through November 2003.

 

Hunter R. Dalton has served as Group President, ATI Long Products since October 2008, and as ATI Allvac Business Unit President since April 2008. Mr. Dalton previously served as Senior Vice President of Sales and Marketing for ATI Allvac since November 2003.

 

Lynn D. Davis has served as Group President, ATI Primary Metals and Exotic Alloys since October 2008. Mr. Davis was ATI Wah Chang Business Unit President from September 2000 to October 2008.

 

Terry L. Dunlap has served as Group President, Flat-Rolled Products since October 2008, and as ATI Allegheny Ludlum Business Unit President since November 2002.

 

David M. Hogan has served as Group President, Engineered Products since April 2007, and as ATI Metalworking Products Business Unit President since 1997.

 

The following description of the particular terms of the notes offered by this prospectus supplement supplements the description of the general terms and provisions of the debt securities set forth in the accompanying prospectus under the caption “Description of Debt Securities.”

 

In this “Description of Notes,” references to “ATI,” the “Company,” “we,” “our” and “us” and similar words refer only to Allegheny Technologies Incorporated and not to any of its subsidiaries.

 

The notes will be issued under a senior indenture to be dated as of June 1, 2009, as supplemented by a supplemental indenture to be executed as of June 2, 2009, between us and The Bank of New York Mellon, as trustee (as so supplemented, the “indenture”). The indenture is subject to and is governed by the Trust Indenture Act of 1939, as amended. We have filed a form of the indenture as an exhibit to the registration statement of which the accompanying prospectus forms a part. The following description summarizes selected provisions of the indenture and the notes. It does not restate the indenture or the terms of the notes in their entirety. We urge you to read the forms of the indenture and the notes because the indenture and the notes, and not this description, define the rights of noteholders.

 

General

 

The notes

 

 

The notes may be converted into shares of our common stock initially at a conversion rate of 23.9263 shares of common stock per $1,000 principal amount of notes (equivalent to a conversion price of approximately $41.795 per share of common stock). The conversion rate is subject to adjustment if certain events occur. A holder surrendering its notes for conversion will not receive any separate cash payment for interest or additional interest, if any, accrued and unpaid to the conversion date except under the limited circumstances described below.

 

The indenture does not limit the amount of debt that may be issued by the Company or its subsidiaries under the indenture or otherwise. The indenture does not contain any financial covenants and does not restrict us from paying dividends or issuing or repurchasing our other securities. Other than restrictions described under the captions “— Fundamental Change Permits Holders to Require Us to Purchase Notes” and “— Merger, Consolidation or Sale of Assets” below and except for the provisions set forth under “— Conversion Rights — Adjustment to Shares Delivered upon Conversion upon Certain Fundamental Changes,” the indenture does not contain any covenants or other provisions designed to afford holders of the notes protection in the event of a highly leveraged transaction involving the Company or in the event of a decline in the credit rating of the Company as the result of a takeover, recapitalization, highly leveraged transaction or similar restructuring involving the Company that could adversely affect such holders.

 

We may, from time to time, without notice to, or the consent of, the holders of the notes, issue additional notes under the indenture with the same terms and with the same CUSIP numbers as the notes offered hereby in an unlimited aggregate principal amount, provided that such additional notes must be part of the same issue as the notes offered hereby for United States federal income tax purposes. We may also from time to time

repurchase notes in open market purchases or negotiated transactions without giving prior notice to the holders of the notes.

 

The terms of the notes allow us to reduce or otherwise set-off against any payments made or deemed made by us to a holder in respect of the notes or common stock for any amounts we believe we are required to withhold by law. For example, non-United States holders of notes may, under some circumstances, be subject to U.S. federal withholding tax with respect to payments of interest on the notes. Holders of convertible debt instruments such as the notes may be deemed to receive taxable distributions if the conversion rate of such instruments is adjusted (or not adjusted) even though such holders do not receive any actual cash or property. In this case, United States holders may be subject to U.S. federal backup withholding tax and non-United States holders may be subject to U.S. federal withholding tax with respect to such deemed distributions. See generally the discussion under the heading “Material U.S. Federal Income Tax Considerations.”

 

Prior to or upon the occurrence of any event that results in an actual or deemed payment by us to a holder in respect of the notes or common stock, the terms of the notes allow us (or the trustee or other paying agent acting on our behalf) to request a holder to furnish any appropriate documentation that may be required in order to determine our withholding obligations under applicable law (including, without limitation, a U.S. Internal Revenue Service Form W-9, Form W-8BEN, Form W-8ECI, as appropriate). Upon the receipt of any such documentation, or if no such documentation is provided, we (or the trustee or other paying agent acting on our behalf) will withhold from any actual or deemed payments by us to a holder in respect of the notes or common stock to the extent required by applicable law. See generally the discussion under the heading “Material U.S. Federal Income Tax Considerations.”

 

The Company does not intend to list the notes on a national securities exchange or interdealer quotation system.

 

Ranking

 

The notes will be our senior and unsecured indebtedness and will rank equally with all of our other existing and future senior and unsecured indebtedness. The notes will effectively rank junior to any of our existing and future secured indebtedness to the extent of the assets securing such indebtedness, and will be structurally subordinated to any indebtedness and other liabilities of our subsidiaries. Indebtedness of our subsidiaries and obligations and liabilities of our subsidiaries are structurally senior to the notes since, in the event of a bankruptcy, liquidation, dissolution, reorganization or other winding up, the assets of our subsidiaries will be available to pay the notes only after the subsidiaries’ indebtedness and other obligations and liabilities are paid in full. If that happens, we may not have sufficient assets remaining to pay the amounts due on any or all of the notes then outstanding. Because we generally stand as an equity holder, rather than a creditor, of our subsidiaries, creditors of those subsidiaries will have their debt satisfied out of the subsidiaries’ assets before our creditors, including the noteholders.

 

As of March 31, 2009, we had an aggregate of approximately $503.5 million of indebtedness outstanding. After giving effect to this offering, the senior notes offering and the application of the proceeds therefrom as described under the caption “Use of Proceeds,” including the purchase our 8.375% notes pursuant to the tender offer (assuming all the outstanding 8.375% notes are purchased pursuant to the tender offer), as of March 31, 2009, we would have had an aggregate of approximately $882.8 million of indebtedness outstanding ($933.7 million if the underwriters exercise in full their option to purchase additional notes). Neither this offering nor the senior notes offering is conditioned upon any minimum level of acceptance in the tender offer. If fewer than all the 8.375% notes are purchased in the tender offer, our indebtedness will be higher. None of this offering, the senior notes offering or the tender offer is conditioned upon any of the other transactions.

 

Interest

 

The notes will bear interest at a rate of 4.25% per year. Interest on the notes will accrue from and including June 2, 2009 or from and including the most recent date on which interest has been paid or duly provided for. Interest will be payable semiannually in arrears on June 1 and December 1 of each year (each

such date, an “interest payment date”), beginning December 1, 2009. At our election, we will pay additional interest, if any, under the circumstances described under “— Events of Default.”

 

Interest will be paid to the person in whose name a note is registered at the close of business on May 15 or November 15, as the case may be, immediately preceding the relevant interest payment date (each such date, a “regular record date”). Interest on the notes will be computed on the basis of a 360-day year composed of twelve 30-day months.

 

If any interest payment date (other than an interest payment date coinciding with the stated maturity date or earlier required repurchase date upon a fundamental change as defined in “— Fundamental Change Permits Holders to Require Us to Purchase Notes”) of a note falls on a day that is not a business day, such interest payment date will be postponed to the next succeeding business day. If the stated maturity date would fall on a day that is not a business day, the required payment of interest (and additional interest), if any, and principal will be made on the next succeeding business day and no interest on such payment will accrue for the period from and after the stated maturity date to such next succeeding business day. If a fundamental change purchase date would fall on a day that is not a business day, the Company will purchase the notes on the next succeeding business day, and no interest or additional interest will accrue for the period from the earlier fundamental change purchase date to such next succeeding business day. The Company will pay the fundamental change purchase price promptly following the later of such next succeeding business day or the time of book-entry transfer or the delivery of the notes as described in “— Fundamental Change Permits Holders to Require Us to Purchase Notes.” The term “business day” means any day other than a Saturday, a Sunday or a day on which banking institutions in the applicable place of payment are authorized or obligated by law or executive order to close.

 

No Optional Redemption

 

No sinking fund is provided for the notes.

 

The notes will not be redeemable prior to their applicable stated maturity date.

 

Conversion Rights

 

General

 

Prior to the close of business on the second scheduled trading day preceding the stated maturity date of the notes, the notes will be convertible at any time at the option of the holder. The conversion rate will initially be 23.9263 shares of common stock per $1,000 principal amount of notes (equivalent to a conversion price of approximately $41.795 per share of common stock). The trustee will initially act as the conversion agent.

 

Upon conversion, you will not receive any separate cash payment for accrued and unpaid interest and additional interest, if any, except as described below. We will not issue fractional shares of our common stock upon conversion of notes. Instead, we will pay cash in lieu of fractional shares based on the last reported sale price (as defined below) of the common stock on the relevant conversion date. Our delivery to you of the full number of shares of our common stock, together with any cash payment for any fractional shares, into which a note is convertible, will be deemed to satisfy in full our obligation to pay:

 

 

As a result, accrued and unpaid interest and additional interest, if any, to, but not including, the conversion date will be deemed to be paid in full rather than cancelled, extinguished or forfeited.

 

The conversion rate and the equivalent conversion price in effect at any given time are referred to as the “applicable conversion rate” and the “applicable conversion price,” respectively, and will be subject to adjustment as described below. The applicable conversion price at any given time will be computed by

dividing $1,000 by the applicable conversion rate at such time. A holder may convert fewer than all of such holder’s notes so long as the notes converted are an integral multiple of $1,000 principal amount.

 

If a holder of notes has submitted notes for repurchase upon a fundamental change, the holder may convert those notes only if that holder withdraws the repurchase election made by that holder in accordance with the terms of the indenture.

 

Upon conversion of a note, except in the limited circumstances described below, the holder of such note will not be entitled to any separate cash payment for accrued and unpaid interest or additional interest, if any. If notes are converted after 5:00 p.m., New York City time, on a regular record date for the payment of interest, holders of such notes at 5:00 p.m., New York City time, on such record date will receive the interest and additional interest, if any, payable on such notes on the corresponding interest payment date notwithstanding the conversion. Notes, surrendered for conversion during the period from 5:00 p.m., New York City time, on any regular record date to 9:00 a.m., New York City time, on the immediately following interest payment date, must be accompanied by funds equal to the amount of interest and additional interest, if any, payable on such interest payment date on the notes so converted; provided that no such payment need be made

 

 

If a holder converts notes, we will pay any documentary, stamp or similar issue or transfer tax due on the issue of any shares of our common stock upon the conversion, unless the tax is due because the holder requests any shares to be issued in a name other than the holder’s name, in which case the holder will pay that tax.

 

The “last reported sale price” of our common stock on any trading day means the closing sale price per share (or if no closing sale price is reported, the average of the bid and ask prices or, if more than one in either case, the average of the average bid and the average ask prices) of our common stock on that trading day as reported in composite transactions for the principal United States national or regional securities exchange on which our common stock is traded.

 

If our common stock is not listed for trading on a United States national or regional securities exchange on the relevant trading day, the “last reported sale price” will be the last quoted bid price for our common stock in the over-the-counter market on the relevant trading day as reported by the National Quotation Bureau or similar organization selected by us. If our common stock is not so quoted, the “last reported sale price” will be the average of the mid-point of the last bid and ask prices for our common stock on the relevant date from each of at least three nationally recognized independent investment banking firms selected by us for this purpose.

 

For purposes hereof, “trading day” means a day during which (i) trading in securities generally occurs on the principal United States national or regional securities exchange on which our common stock is then listed or admitted for trading or, if our common stock is not then listed or admitted for trading on a United States national or regional securities exchange, in the principal other market on which our common stock is then traded, and (ii) a last reported sale price for our common stock is available on such securities exchange or market. If our common stock is not so listed or traded, “trading day” means a business day.

 

Conversion Procedures

 

If you hold a beneficial interest in a global note, to convert you must comply with DTC’s procedures for converting a beneficial interest in a global note and, if required, pay funds equal to interest payable on the next interest payment date to which you are not entitled and, if required, pay all taxes or duties, if any.

If you hold a certificated note, to convert you must

 

 

The date you comply with these requirements is the conversion date under the indenture.

 

If a holder has already delivered a purchase notice as described under “— Fundamental Change Permits Holders to Require Us to Purchase Notes” with respect to a note, the holder may not surrender that note for conversion until the holder has withdrawn the notice in accordance with the indenture.

 

Upon conversion of the notes, we will deliver to a converting holder a number of shares equal to (i) the aggregate principal amount of notes to be converted divided by $1,000, multiplied by (ii) the applicable conversion rate. We will deliver such shares of common stock on the third business day immediately following the relevant conversion date. We will deliver cash in lieu of any fractional share of common stock issuable upon conversion based upon the last reported sale price on the relevant conversion date.

 

Each conversion will be deemed to have been effected as to any notes surrendered for conversion on the date the requirements set forth in the indenture have been satisfied as to such notes; provided, however, that a converting noteholder will become the record holder of any shares of our common stock due upon such conversion as of the relevant conversion date.

 

Conversion Rate Adjustments

 

The conversion rate will be adjusted as described below, except that we will not make any adjustments to the conversion rate if holders of the notes participate (as a result of holding the notes, and at the same time as common stockholders participate) in any of the transactions described below as if such holders of the notes held a number of shares of our common stock equal to the applicable conversion rate, multiplied by the principal amount (expressed in thousands) of notes held by such holders, without having to convert their notes.

 

(1) If we issue shares of our common stock as a dividend or distribution on shares of our common stock, or if we effect a share split or share combination, the conversion rate will be adjusted based on the following formula:

 

CR1		=		CR0		×		OS1 OS0

 

where,

 

 

 

(2) If we distribute to holders of all or substantially all of our common stock any rights or warrants entitling them for a period of not more than 45 calendar days to subscribe for or purchase shares of our common stock, at a price per share less than the average of the last reported sale prices of our common stock for the 10 consecutive trading-day period ending on the trading day immediately preceding the date of announcement of such distribution, the conversion rate will be adjusted based on the following formula (provided that the conversion rate will be readjusted to the extent that such rights or warrants are not exercised prior to their expiration):

 

CR1		=		CR0		×		OS0 + X OS0 + Y

 

where,

 

 

 

 

(3) If we distribute shares of our capital stock, evidences of our indebtedness or other assets or property of ours to holders of all or substantially all of our common stock, excluding

 

 

then the conversion rate will be adjusted based on the following formula:

 

CR1		=		CR0		×		SP0 SP0 − FMV

 

where,

 

 

 

 

With respect to an adjustment pursuant to this clause (3) where there has been a payment of a dividend or other distribution on our common stock in shares of capital stock of any class or series, or similar equity interest, of or relating to a subsidiary or other business unit, which we refer to as a “spin-off,” the conversion rate in effect immediately prior to 5:00 p.m., New York City time, on the effective date of the spin-off will be increased based on the following formula:

 

CR1		=		CR0		×		FMV0 + MP0 MP0

where,

 

 

 

 

The adjustment to the conversion rate under the preceding paragraph will occur on the tenth trading day from, and including, the effective date of the spin-off and shall be applied on a retroactive basis from, and including, the effective date of the spin-off; provided that in respect of any conversion occurring prior to the effective date of the spin-off with respect to which the settlement date would occur during the 10 trading days from, and including, the effective date of any spin-off, references with respect to the spin-off to the 10 consecutive trading-day period shall be deemed replaced with such lesser number of trading days as have elapsed between the effective date of such spin-off and the settlement date in determining the applicable conversion rate.

 

(4A) If any regular quarterly cash dividend or distribution made to holders of all or substantially all of our common stock is in excess of $0.18 per share (the “initial dividend threshold”), the conversion rate will be adjusted based on the following formulas:

 

CR1		=		CR0		×		SP0 SP0 − C

 

where,

 

 

 

 

The initial dividend threshold is subject to adjustment in a manner inversely proportional to adjustments to the conversion rate, provided that no adjustment will be made to the dividend threshold amount for any adjustment made to the conversion rate under this clause (4A).

 

(4B) If we pay any cash dividend or distribution that is not a regular quarterly cash dividend or distribution to holders of all or substantially all of our common stock, the conversion rate will be adjusted based on the following formula:

 

CR1		=		CR0		×		SP0 SP0 − C

 

where,

 

 

 

 

(5) If we or any of our subsidiaries make a payment in respect of a tender offer or exchange offer for our common stock, to the extent that the cash and value of any other consideration included in the payment per share of common stock exceeds the last reported sale price of our common stock on the trading day next succeeding the last date on which tenders or exchanges may be made pursuant to such tender or exchange offer, the conversion rate will be increased based on the following formula:

 

CR1		=		CR0		×		AC + (SP1 × OS1) OS1 × SP1

 

where,

 

 

 

 

 

The adjustment to the conversion rate under the preceding paragraph will occur on the tenth trading day from, and including, the trading day next succeeding the date such tender or exchange offer expires and shall be applied on a retroactive basis from, and including, the trading day next succeeding the date such tender or exchange offer expires; provided that in respect of any conversion occurring prior to the date such tender or exchange offer expires with respect to which the settlement date would occur during the 10 trading days from, and including, the trading day next succeeding the date such tender or exchange offer expires, references with respect to the tender or exchange offer to the 10 consecutive trading-day period shall be deemed replaced with such lesser number of trading days as have elapsed between the trading day next succeeding the date such tender or exchange offer expires and the settlement date in determining the applicable conversion rate.

 

Except as stated herein, we will not adjust the conversion rate for the issuance of shares of our common stock or any securities convertible into or exchangeable for shares of our common stock or the right to purchase shares of our common stock or such convertible or exchangeable securities.

 

As used in this section, “ex-dividend date” means the first date on which the shares of our common stock trade on the applicable exchange or in the applicable market, regular way, without the right to receive the issuance or distribution in question.

 

We are permitted to increase the conversion rate of the notes by any amount for a period of at least 20 days if our board of directors determines that such increase would be in our best interest. We may also (but are not required to) increase the conversion rate to avoid or diminish income tax to holders of our common stock or rights to purchase shares of our common stock in connection with a dividend or distribution of shares (or rights to acquire shares) or similar event.

 

A holder may, in some circumstances, including the distribution of cash dividends to holders of our shares of common stock, be deemed to have received a distribution or dividend subject to U.S. federal income tax as

a result of an adjustment or the nonoccurrence of an adjustment to the conversion rate. If we pay withholding taxes on your behalf as a result of an adjustment to the conversion rate of the notes, we may, at our option and pursuant to certain provisions of the indenture, set-off such payments against payments of cash and common stock on the notes. For a discussion of the U.S. federal income tax treatment of an adjustment to the conversion rate, see “Material U.S. Federal Income Tax Considerations.”

 

To the extent that we have a rights plan in effect upon conversion of the notes into common stock, holders that convert their notes will receive, in addition to our common stock, the rights under the rights plan, unless prior to any conversion, the rights have separated from our common stock, in which case, and only in such case, the conversion rate will be adjusted at the time of separation as if we distributed to all holders of our common stock shares of our capital stock, evidences of indebtedness or assets as described in clause (3) above, subject to readjustment in the event of the expiration, termination or redemption of such rights.

 

Notwithstanding any of the foregoing, the applicable conversion rate will not be adjusted

 

 

Adjustments to the applicable conversion rate will be calculated to the nearest 1/10,000th of a share. We will not be required to make an adjustment in the conversion rate unless the adjustment would require a change of at least 1% in the conversion rate. However, we will carry forward any adjustments that are less than 1% of the conversion rate that we elect not to make and take them into account upon the earlier of (1) any conversion of notes or (2) such time as all adjustments that have not been made prior thereto would have the effect of adjusting the conversion rate by at least 1%. Except as described below in this section, in “— Recapitalizations, Reclassifications and Changes of Our Common Stock” and in “— Adjustment to Shares Delivered upon Conversion upon Certain Fundamental Changes,” we will not adjust the conversion rate.

 

Recapitalizations, Reclassifications and Changes of Our Common Stock

 

In the case of (A) any recapitalization, reclassification or change of our common stock (other than changes resulting from a subdivision or combination) as a result of which our common stock would be converted into, or exchanged for, stock, other securities, other property or assets, or (B) any statutory share exchange, consolidation or merger involving us pursuant to which our common stock will be converted into cash, securities or other property or any sale, lease or other transfer in one transaction or a series of related transactions of all or substantially all of the consolidated assets of us and our subsidiaries, taken as a whole, to any person other than one or more of our subsidiaries, then, at the effective time of the transaction, the right to convert a note will be changed into, with respect to each $1,000 in principal amount of notes, a right to convert it into the kind and amount of shares of stock, other securities or other property or assets (including cash or any combination thereof) that a holder of a number of shares of common stock equal to the conversion rate prior to such transaction would have owned or been entitled to receive (the “reference property”) upon such transaction. If the transaction causes our common stock to be converted into the right to receive more than a single type of consideration (determined based in part upon any form of stockholder election), the reference property into which the notes will be convertible will be deemed to be the weighted average of the

types and amounts of consideration received by the holders of our common stock that affirmatively make such an election.

 

Adjustments of Prices

 

Whenever any provision of the indenture requires us to calculate last reported sale prices over a span of multiple days, we will make appropriate adjustments to account for any adjustment to the conversion rate that becomes effective at any time during the period from which such prices are to be calculated. Such adjustments will be effective as of the effective date of the adjustment to the conversion rate.

 

Adjustment to Shares Delivered upon Conversion upon Certain Fundamental Changes

 

If a “fundamental change” occurs and a holder elects to convert its notes in connection with such fundamental change, we will, under certain circumstances, increase the conversion rate for the notes so surrendered for conversion by a number of additional shares of common stock (the “additional shares”), as described below. Any conversion will be deemed to have occurred in connection with such fundamental change only if (A) in the case of a fundamental change described in clause (2) of the definition of fundamental change, such notes are surrendered for conversion from and after the date that is 30 scheduled trading days prior to the anticipated effective date of such fundamental change through and including the business day immediately preceding the related fundamental change purchase date (as defined below under “— Fundamental Change Permits Holders to Require Us to Purchase Notes”), or (B) in the case of a fundamental change described in clause (1) or (3) of the definition of fundamental change, such notes are surrendered for conversion from and after the effective date of such fundamental change through and including the business day immediately preceding the related fundamental change purchase date. We will notify noteholders and issue a press release (A) at least 30 scheduled trading days prior to the anticipated effective date of any fundamental change described in clause (2) of the definition of fundamental change and (B) no later than five business days after the effective date of any other fundamental change.

 

Upon surrender of notes for conversion in connection with a fundamental change, we will deliver shares of common stock, including the additional shares, as described under “— Settlement of Conversions in a Fundamental Change.” However, if the consideration for our common stock in any fundamental change described in clause (2) of the definition of fundamental change is comprised entirely of cash, for any conversion of notes following the effective date of such fundamental change, the conversion obligation will be calculated based solely on the “stock price” (as defined below) for the transaction and will be deemed to be an amount equal to the applicable conversion rate (including any adjustment as described in this section) multiplied by such stock price. In such event, the conversion obligation will be determined and paid to holders in cash on the third business day following the conversion date.

 

The number of additional shares by which the conversion rate will be increased will be determined by reference to the table below, based on the date on which the fundamental change occurs or becomes effective (the “effective date”) and the price (the “stock price”) paid per share of our common stock in the fundamental change. If the fundamental change is a transaction described in clause (1) or (2) of the definition thereof, and holders of our common stock receive only cash in that fundamental change, the stock price shall be the cash amount paid per share. Otherwise, the stock price shall be the average of the last reported sale prices of our common stock over the 10 consecutive trading-day period ending on the trading day immediately preceding the effective date of the fundamental change.

 

The stock prices set forth in the column headings of the table below will be adjusted as of any date on which the conversion rate of the notes is otherwise adjusted. The adjusted stock prices will equal the stock prices applicable immediately prior to such adjustment, multiplied by a fraction, the numerator of which is the conversion rate immediately prior to the adjustment giving rise to the stock price adjustment and the denominator of which is the conversion rate as so adjusted. The number of additional shares will be adjusted in the same manner as the conversion rate as set forth above under “— Conversion Rate Adjustments.”

The following table sets forth the hypothetical stock price and the number of additional shares to be received per $1,000 principal amount of notes:

 

Stock price on fundamental change date

 

 

The exact stock prices and effective dates may not be set forth in the table above, in which case the following shall apply:

 

 

Notwithstanding the foregoing, in no event will the total number of shares of common stock issuable upon conversion of the notes exceed 31.1041 per $1,000 principal amount of notes, subject to adjustments in the same manner as the conversion rate as set forth above under “— Conversion Rate Adjustments.”

 

In addition, if a holder of notes elects to convert its notes prior to the effective date of any fundamental change, and the fundamental change does not occur, such holder will not be entitled to an increased conversion rate in connection with such conversion.

 

Our obligation to satisfy the additional shares requirement could be considered a penalty, in which case the enforceability thereof would be subject to general principles of reasonableness and equitable remedies.

 

Our obligation to increase the conversion rate as described above could discourage a potential acquirer of us. The provisions with respect to the adjustment to the conversion rate upon a fundamental change, however, are not the result of management’s knowledge of any specific effort to obtain control of us by any means or part of a plan by management to adopt a series of anti-takeover provisions.

 

Settlement of Conversions in a Fundamental Change

 

As described above under “— Recapitalizations, Reclassifications and Changes of Our Common Stock,” upon effectiveness of any fundamental change described under clause (2) of the definition of fundamental change as set forth below under “— Fundamental Change Permits Holders to Require Us to Purchase Notes,” the notes will be convertible only into reference property, if applicable. If, as described above in “— Adjustment to Shares Delivered Upon Conversion Upon Certain Fundamental Changes,” we are required to increase the conversion rate for notes converted in connection with such fundamental change by the additional shares as a result of the fundamental change, notes so surrendered for conversion will be settled as follows:

 

 

 

Fundamental Change Permits Holders to Require Us to Purchase Notes

 

If a fundamental change (as defined below in this section) occurs at any time, each holder will have the right, at that holder’s option, to require us to purchase for cash any or all of that holder’s notes, or any portion of the principal amount thereof, that is equal to $1,000 or an integral multiple of $1,000. The price we are required to pay is equal to 100% of the principal amount of the notes to be purchased plus accrued and unpaid interest, including additional interest, if any, to but excluding the fundamental change purchase date (unless the fundamental change purchase date is between a regular record date and the interest payment date to which it relates, in which case we will pay accrued and unpaid interest to the holder of record on such regular record date). The fundamental change purchase date will be a date specified by us that is no later than the 35th calendar day following the date of our fundamental change notice as described below. Any notes purchased by us will be paid for in cash.

 

A “fundamental change” will be deemed to have occurred at the time after the notes are originally issued that any of the following occurs:

 

(1) a “person” or “group” within the meaning of Section 13(d) of the Exchange Act other than us, our subsidiaries or our or their employee benefit plans files a Schedule 13D or Schedule TO (or any successor schedule, form or report) pursuant to the Exchange Act disclosing that such person has become the direct or indirect “beneficial owner,” as defined in Rule 13d-3 under the Exchange Act, of our common equity representing more than 50% of the voting power of all shares of our common equity entitled to vote generally in the election of directors, unless such beneficial ownership arises as a result of a revocable proxy delivered in response to a public proxy or consent solicitation made pursuant to the applicable rules and regulations under the Exchange Act; and provided, that no person or group shall be deemed to be the beneficial owner of any securities tendered pursuant to a tender or exchange offer made by or on behalf of such person or group until such tendered securities are accepted for purchase or exchange under such offer;

 

(2) consummation of (A) any recapitalization, reclassification or change of our common stock (other than changes resulting from a subdivision or combination) as a result of which our common stock would be converted into, or exchanged for, stock, other securities, other property or assets or (B) any statutory share exchange, consolidation or merger involving us pursuant to which our common stock will be converted into cash, securities or other property or any sale, lease or other transfer in one transaction or a series of transactions of all or substantially all of the consolidated assets of us and our subsidiaries, taken as a whole, to any person other than one or more of our subsidiaries, other than any transaction:

 

 

(3) our common stock (or other capital stock or American Depositary Receipts into which the notes are then convertible pursuant to the terms of the indenture) ceases to be listed on the New York Stock Exchange, the Nasdaq Global Select Market or the Nasdaq Global Market (or their respective successors).

 

A fundamental change as a result of clause (2) above will not be deemed to have occurred, however, if 90% or more of the consideration received or to be received by our common stockholders (excluding cash payments for fractional shares and cash payments made pursuant to dissenters’ appraisal rights) in connection with the transaction or transactions constituting the fundamental change consists of shares of capital stock or American Depositary Receipts traded on the New York Stock Exchange, the Nasdaq Global Select Market or the Nasdaq Global Market (or their respective successors) or which will be so traded when issued or exchanged in connection with the transaction that would otherwise be a fundamental change (these securities being referred to as “publicly traded securities”) and as a result of this transaction or transactions the notes become convertible into such publicly traded securities, excluding cash payments for fractional shares.

 

On or before the 20th day after the occurrence of a fundamental change, we will provide to all holders of the notes and the trustee and paying agent a notice of the occurrence of the fundamental change and of the resulting purchase right. Such notice shall state, among other things

 

 

Simultaneously with providing such notice, we will publish a notice containing this information in a newspaper of general circulation in The City of New York or publish the information on our website or through such other public medium as we may use at that time.

 

To exercise the purchase right, a holder must deliver, on or before the business day immediately preceding the fundamental change purchase date, subject to extension to comply with applicable law, the notes to be purchased, duly endorsed for transfer, together with a written purchase notice and the form entitled “Form of Fundamental Change Purchase Notice” on the reverse side of the notes duly completed, to the paying agent. The purchase notice must include the following information:

 

 

A holder may withdraw any purchase notice (in whole or in part) by a written notice of withdrawal delivered to the paying agent prior to the close of business on the business day prior to the fundamental change purchase date. The notice of withdrawal shall include the following information:

 

 

 

We will be required to purchase the notes on the fundamental change purchase date, subject to extension to comply with applicable law. A holder of notes that has exercised the purchase right will receive payment of the fundamental change purchase price promptly following the later of the fundamental change purchase date or the time of book-entry transfer or the delivery of the notes. If the paying agent holds money or securities sufficient to pay the fundamental change purchase price of the notes on the second business day following the fundamental change purchase date, then the following shall occur:

 

 

In connection with any purchase offer pursuant to a fundamental change purchase notice, we will, if required do the following:

 

 

We will not be required to make an offer to purchase the notes upon a fundamental change if a third party makes the offer in the manner, at the times, and otherwise in compliance with the requirements set forth in the indenture applicable to an offer by us to purchase the notes upon a fundamental change and such third party purchases all notes validly tendered and not withdrawn in such offer.

 

The purchase rights of the holders could discourage a potential acquirer of us. The fundamental change purchase feature, however, is not the result of management’s knowledge of any specific effort to obtain control of us by any means or part of a plan by management to adopt a series of anti-takeover provisions.

 

The term fundamental change is limited to specified transactions and may not include other events that might adversely affect our financial condition or the value of the notes. In addition, the requirement that we offer to purchase the notes upon a fundamental change may not protect holders in the event of a highly leveraged transaction, reorganization, merger or similar transaction involving us.

 

The definition of fundamental change includes a phrase relating to the conveyance, transfer, sale, lease or disposition of “all or substantially all” of our consolidated assets. There is no precise, established definition of the phrase “substantially all” under applicable law. Accordingly, the ability of a holder of the notes to require us to purchase its notes as a result of the conveyance, transfer, sale, lease or other disposition of less than all of our assets may be uncertain.

 

If a fundamental change were to occur, we may not have enough funds to pay the fundamental change purchase price or be able to arrange for financing to pay the purchase price in connection with a tender of notes for purchase. Our ability to repurchase the notes for cash may be limited by the terms of our then existing borrowing arrangements or otherwise. See “Risk Factors — Risks Related to the Notes — We may not be able to repurchase the notes upon a fundamental change.” If we fail to purchase the notes when required following a fundamental change, we will be in default under the indenture. In addition, we have, and may in the future incur, other indebtedness with similar change in control provisions permitting our holders to

accelerate or to require us to purchase our indebtedness upon the occurrence of similar events or on some specific dates.

 

Covenants

 

Neither the Company nor any of its subsidiaries will be restricted by the indenture from any of the following: